Seeking Register Information for AT-MIO-16H-9

Hello -
I was recently handed an AT_MIO-16H-9 (barcode sticker A3B426) and asked
if I could do some real-time process control with it.
The User Manual included with the package describes setting jumpers but not
how to retrieve data. The back of the user manual has a page offering a
free copy of the register programming manual.
NI informs me the 16H-9 is obsolete.. and apparently so is the register programming
manual.
Does anyone have an archive of old NI-DAQ manuals? Or maybe a code fragment
or two that would permit retrieveal of converted data samples?
Your time is appreciated.
Regards,
Mark Becker
[email protected]

Go to ni.com and search on "at mio 16" (no dashes). You will find an entry for the AT-MIO-16 User Manual. It has your information.
Regards,
Doug

Similar Messages

Seeking product information for a Scarab SDRAM Module; P/N: 185422D-01

Seeking general product information for a Scarab SDRAM Module; Part Numnber: 185422D-01. I cannot seem to find any information on this SDRAM module anywhere. It was a RAM card pulled off another NI board. Thank you.

Hello Isidore,
I can answer questions 3 and 4, as I have that sort of setup.
3.) No, you don't really need an SSD, but I would certainly recommend that you buy one. You'll notice a huge difference in the amount of time it takes to boot. I bought the OCZ Vertex 3 (120GB) a while back, and it's very fast. Whether or not you should get one just depends on whether the speed is worth it to you, but if I were you, I would.
As for the size, that depends on exactly what you'll use it for. See number 4 below.
4.) Yes, that's my setup. The SSD is my primary drive, and my HDD is for everything else. Here's basically how I have everything setup:
When I finish a day of shooting, I copy all my footage into a special folder (I named it "IMPORT" since I use it often) on my SSD. I do this because the clips load much faster in Prelude and Premiere Pro. Then, after I finish and export the project, I move all the original files onto my HDD. I would still do this even I had a larger SSD, because it's always good to keep your primary drives clean.
I also set the render and cache directories to those that I create on my HDD, because for longer projects, my SSD would fill up quickly, so that's why you may want to consider buying a larger SSD (even though 128GB would probably work just fine).
I hope this helped a little!
~Josh

I registered the wrong information for my iCloud account--I misspelled and now want to change it. Help is needed to delete the account and start anew.

I registered the the wrong information for my iCloud account--I misspelled the account name. I accidentally spelled blackberry instead of blackbird. How can I change this?

If you don't want to use an alias you'll have to create a new account as you cannot change the @icloud.com address once created. You'll have to create a new ID, verify the ID, then use the ID to create the new account, and migrate your iCloud data to the new account.
If you are currently syncing data with iCloud, begin by saving any photo stream photos to your camera roll as mentioned above. If you are syncing Notes with iCloud, you'll also need to open each of them and email them to yourself so they can be recreated in the new account. Finally, if you are syncing any iWork documents with iCloud, turn off iCloud syncing in your iWork app settings.
Then go to Settings>iCloud, tap Delete Account, and choose Keep on My iPhone when prompted. Then in Settings>iCloud tap Get a Free Apple ID at the bottom, set up your new ID, verify the email address you use to create it by responding to Apple's verification email, then sign in with the new ID to create your new account. Turn on your iCloud sync settings and choose Merge when prompted to upload your data to the new account. When you turn Mail to On you will be prompted to create your new @icloud.com email address. Be carefull to type it correctly as it cannot later be changed.

Register information on X series driver for encoder

Hi All:
I am working on the X series driver development by using MHDDK. After comparing M series and X series I found that theere is a Gi_Save_Trace bit in register Gi_Command_Register in M series. When it is set, the register goes into the latched mode after the next clock edge to assure valid data was latched. However, I can't find equivalent register bit in all X series counter registers.
Can anyone tell me what is the equivalent register bit for same function that Gi_Save_Trace does?
Thanks,
Larry

Hi PedroMunoz,
Actually, I wanted to post it at DDK forum. I don't know why it is shown here. I may need to do it again.
Thanks,
Larry

I need NT Embedded support files (.KDF) for AT MIO-16XE-50 and AT AO-6

Need information on Windows NT Embedded Drivers for AT MIO-16XE-50 and AT AO-6. Anyone have any ideas?

Hello;
I found a good link at the Developer Zone site and can be usefull for you. I'm also attaching a file that can be interesting for you.
Hope this helps.
Filipe
http://zone.ni.com/devzone/conceptd.nsf/2d17d611efb58b22862567a9006ffe76/209eaac345736690862569c30074eb7a?OpenDocument
Attachments:
Kdf.zip ‏11 KB

Error getting CSS support information for driver [HsvAdmDriver]

Hi all,
we have installed HFM on Win2003 x64 EE server. Everything is working correctly, but we are not able to create a connection to HFM data source in Web Analysis.
Following error occurs:
4010 Error: Error Getting CSS Support Information For Driver HsvADMDriver; Nested Exception Is: Com.Hyperion.Ap.APException:
Does anyone know how to fix this?
Regards,
Vladino

Hi Vladino,
What version of HFM are you on?
Do you have the ADM driver and HFM client installed on your Web Analysis server along with the HFM server and/or cluster being registered on the Web Analysis server?
Regards,
John A. Booth
http://www.metavero.com

How to download the driver of AT-MIO-16H-9

I have a daq card, it's assembly number is 180705 and board name is AT-MIO-16H-9,my computer is running with windows 98 operation system,I can't find the driver program, thank you for your answer.

Greetings,
The latest version of the NI-DAQ driver that is compatible with the AT-MIO-16H-9 is NI-DAQ 6.1. This driver can be downloaded from the following location:
http://digital.ni.com/softlib.nsf/websearch/14993FD4023B9A86862565A7006F5C80?opendocument&node=132070_US
National Instruments also provides a Hardware Installation Wizard to walk you through the installation and configuration of your hardware and software.
http://ni.com/support/install/
Good luck with your application.
Spencer S.

Need more information for TLP (Govt purchase)

Hi, I am seeking more information on TLP for govt purchase, but have not been able to reach any of the Singapore office contact numbers for the past few days (No answer). Is there any direct mail available to reach them?

It is good mobo , unless unscheduled (my)problem (bad sata cables) ALL is fine!
Recommendation.

Inconsistencies in your sync information for contacts where detected and...

Inconsistencies in your sync information for contacts where detected and have been repaired
i got this massage all time when try syncing i made reset sync data and didnt work i tried to fix this with unregistered my mac and register it again also not working, can any one help please?
i got a website synced and iphone + macbook pro also synced

You appear to be referring to *MobileMe Sync* and not iSync (which is only for syncing to non-Apple mobile phones).
The *MobileMe Sync* forum is here:
http://discussions.apple.com/forum.jspa?forumID=1264

Error deploying data tier application to SQL Azure at "Registering metadata for database" step ... should I care?

I'd like to move an on-premesis SQL Server Database to SQL Azure. I've used SQL Mgmt Studio to Extract Data Tier Application and save my db as a dacpac file. Now I'm connected to my Azure server and I've chosen to Deploy Data Tier Application. I select my
dacpac and the deploy starts but then on the last step "Registering metadata for database" it times out. I've tried it a couple of times and each time the deployed database is there and appears to be fully populated, but I'm not sure if I can ignore
that error and continue. What is supposed to happen in that step, and should I expect it to fail when deploying to SQL Azure?
I'm following the steps here http://msdn.microsoft.com/en-us/library/hh694043.aspx in the Using Migration Tools > Data-tier Application DAC Package section, except that to deploy there's no SQL Mgmt Studio > Object Explorer [server]
> Management >"Data Tier Applications" node, so I'm deploying by right-clicking on the server name and choosing "Deploy Data-tier Application".
My (total) guess here is that it's deployed the database fine and it's doing whatever magic happens when you register a data tier application, except that it's not working for SQL Azure.
I'm running against a server created for the new Azure service tiers, not against a Web/Business edition server.
The full details of error I get are below.
thanks,
Rory
TITLE: Microsoft SQL Server Management Studio
Could not deploy package.
Warning SQL0: A project which specifies SQL Server 2008 as the target platform may experience compatibility issues with SQL Azure.
(Microsoft.SqlServer.Dac)
ADDITIONAL INFORMATION:
Unable to register data-tier application: Unable to reconnect to database: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft.Data.Tools.Schema.Sql)
Unable to reconnect to database: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft.Data.Tools.Schema.Sql)
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft SQL Server, Error: -2)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.9213&EvtSrc=MSSQLServer&EvtID=-2&LinkId=20476
The wait operation timed out
BUTTONS:
OK

Hello,
The registration process creates a DAC definition that defines the objects in the database, and register the DAC definition in the master system database in Windows Azure SQL Database.
Based on the error message, there is timeout error when connect to SQL Database. Did you deploy a large database? When move large data to Azure SQL Database, it is recommended to use SQL Server Integration Services (SSIS) and BCP utility.
Or you can try to create a client application with the Data-Tier Application Framework (DACFx) client tool to import database and handle connection loss it by re-establish the connection.
Reference: http://sqldacexamples.codeplex.com/
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

AT-MIO 16H 9 not detected by the examples

I have downloaded the 480.zip file with the necessary libraries for DOS application development with Borland C++.
The sample DOS programs do not detect my at-mio 16h 9 board, although it is correctly installed (under win98).I tested it with daqconfig for windows and labview.
Do I need additional drivers for DOS, or a different library ?

Actually, DAQ version 4.8 supports the device under DOS, but it will not support the device under a command prompt of Windows 98. You'll have to use NI-DAQ 5.0 or greater and configure the device with nidaqcfg.exe under Windows. You can then get the device to work out with programs called from a win98 command prompt.
--Joe

I stuck at the "Enter your billing information for identity verification" step in the ADP registration. Could anybody help me?

Hi all,
I' have just started to register to the Apple Developer Program (iOS). But, unfortunately I stuck at the first step:
"Enter your billing information for identity verification"
It is not possible to go to the next step. When I click on continue, it always shows the same form without any notice about missing fields or something like that.
What can I do to go on with the registration?
Many thank in advance
Christian

Hi,
I found no way to go to the next step. Than I contacted the Apple Dev Support and they called me back very soon. The problem can be justified by the fact that I prior started to register as a company. Then I decided to go back to register as an indivudual and this does not work. The Apple Support knows this problem and has removed my stored registration. Then I could start at the beginning and proceed as intended.
Best regards
Christian

Current information for account recovery

According to the guidance for account recovery, the following information is needed.
https://support.skype.com/en/faq/FA12053/how-can-i-recover-my-account-if-it-has-been-suspended
Where can we find this information so I have it prior to anything happening to my account? Is it anywhere in our current profile or such?
Thanks...

Perhaps I misunderstood or the link took me somewhere unexpected, but that doesn't seem to be the answer.
I click the link and it takes me to the login page. When I log in, it then takes me to my profile page. However, my profile page doesn't contain the specific details needed to retrieve access to my account if it's ever hacked or such.
I ask as I had a friend who had his account hacked and when he tried to get access again, was told he needed the information per the link.
your Skype Name
the email address you used to register with Skype
a contact email address, such as a personal or business address different to the one you registered your account with
the country you registered in
the year you registered
the payment method you most recently used*
Some are easy such as skype name and even a contact e-mail (if that means just an e-mail of one of my friends I have contact with on skype...) but the country registered in and the year I registered are not shown.
If I misunderstood where to find this from your link, please elaborate so I can pull this information for my records.
Thanks for the reply...

The App Store asks to "verify" my personal information, For my name, state, credit card, etc. I don't even live in the US and I don't have a CC, nor do I want to give away my personal information. I just want to download free apps. Any work-arounds?

Title says it all.
I'm really getting sick of websites getting more and more into your business. Google forcing you to get a G+ account and asking for your identifying information, for example (like your phone number).
It's extremely irritating, and I'm opting out of everything that enforces the such. If Apple begins pushing like this, I will just close my relationship with the company and obtain apps by using third-party software to force them onto the phone.
But before going that far, I'd like to find work arounds.
First of all, I don't even know why it asks me for my "state". I don't even live in the USA anymore, as I moved to China (though I won't use the Chinese store as I don't speak or understand the local language, which is Chinese).
All I want... is to continue using the English App Store to get free apps from here in my home in China, without getting stopped by Apple asking for more info on me. I don't want to share my name, I don't want to share my address, and I can't even complete the form as I no longer have a "state" and don't have any credit info.
So that's just that. If there's no way around it I'll find another way to install apps without the App Store.
Sorry for the message tone, I'm just really irritated with the way the internet is getting.
Thanks in advance!
- Alex

The living issue is complex in my case. Legally speaking, I have no personal residence globally. I just live wherever my father goes, which is everywhere. I'm an expat and it seems that these sites aren't really expat-friendly. They seem to be built for localization and assume everyone stays in the same place.
I don't know what I'd be considered. I'm a US passport holder and live in China, but I only speak some Chinese and I can't read it (it using non-latin characters is just too much for my mind's memory to handle). Besides that, I'm not interested in popular Chinese apps. They tend to just be annoying and kooky and generic and put together badly, often full adware and spyware (speaking for most Chinese software, in fact). In fact, a lot of apps I want are illegal in China (YouTube, Facebook, etc) and I use a VPN to use the services. I assume I wouldn't find these apps on the Chinese store. In fact, last I checked, there wasn't many English apps on the Chinese app store. This is probably due to their strict moderation or something.
I've been going to international schools since I got here and college would be in English too. I can speak some Chinese, but not read it.
Well, I guess the answer is that I can't use the App Store in English. So I guess I'll just sign out everything on my phone involving my Apple account and just start using third-party tools to do my business.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

Seeking Register Information for AT-MIO-16H-9

Similar Messages

Maybe you are looking for