Seeking sequence timeline help, please

After some CC update -- the audio tracks of video clips aren't staying connected to the video clips in the Premiere Pro CC sequence timeline. Meaning, if I grab a video clip in the sequence timeline and move it somewhere or cut it -- the corresponding audio track just sits there and doesn't move or get edited. This results in a new nightmare of having to move the audio and video clips separately on the sequence timeline. Relative to previous versions of Premiere -- I'd described this problem as all audio tracks not linked to their corresponding video clip.
Yes, they're all "linked." That appears to have no effect.
I'm assuming some new feature was added that I don't understand -- and I'm very, very grateful if anyone can tell me how to solve this issue and get back to the wonderful world of truly linked video-audio clips.
Thank you.

The obviouse first question is do you have the "Linked Selection" activated "Y" (its the one next to the horse shoe magnet symbol in the timeline pane). If that's not toggled to on you'll get the behaviour your describing.

Similar Messages

After Effects PNG Sequence Error Help Please

When I try to render a png sequence I got the following errors
After effects warning: Could not create file <file path> Access was denie
Another message box saying
AEGP plugin PNGIO Support: Unable to create PNGIO
(5027::12)
Another message box saying
After Effects error cannot close a closed file
(3::5)
It renders a few frames and then it crashes with these errors. Please help THANKS

Here is my log
Adobe After Effects v12.0 (Windows 64) render log for project “Untitled Project.aep”
Rendering started on 11/8/2014 at 9:34:58 AM
11/8/2014 9:34:58 AM: Starting composition “cinematicsPre 2”.
Render Settings: Best Settings
Quality: Best
Resolution: Full
Size: 1702 x 953
Proxy Use: Use No Proxies
Effects: Current Settings
Disk Cache: Read Only
Color Depth: Current Settings
Frame Blending: On for Checked Layers
Field Render: Off
Pulldown: Off
Motion Blur: On for Checked Layers
Solos: Current Settings
Time Span: Work Area
Start: 0:00:04:10
End: 0:00:25:27
Duration: 0:00:21:19
Frame Rate: 30.00
Guide Layers: All Off
Skip Existing Files: Off
Output Module:Lossless
Output To:C:\Users\Matthew\Desktop\Youtube Stuff\ObeyRC\Sequence\1\cinematicsPre 2_[#####].png
Format: PNG
Output Info: -
Start Frame: 130
Output Audio: -
Channels: RGB
Depth: Millions of Colors
Color: Premultiplied
Resize: -
Crop: -
Final Size: 1702 x 953
Profile: -
Post-Render Action: None
0:00:04:10 (1): 3 Seconds
0:00:04:11 (2): 1 Seconds
0:00:04:12 (3): 1 Seconds
0:00:04:13 (4): 1 Seconds
0:00:04:14 (5): 1 Seconds
0:00:04:15 (6): 1 Seconds
0:00:04:16 (7): 1 Seconds
0:00:04:17 (8): 1 Seconds
0:00:04:18 (9): 1 Seconds
0:00:04:19 (10): 1 Seconds
0:00:04:20 (11): 1 Seconds
0:00:04:21 (12): 1 Seconds
0:00:04:22 (13): 1 Seconds
0:00:04:23 (14): 1 Seconds
0:00:04:24 (15): 1 Seconds
0:00:04:25 (16): 1 Seconds
0:00:04:26 (17): 0 Seconds
0:00:04:27 (18): 1 Seconds
0:00:04:28 (19): 1 Seconds
0:00:04:29 (20): 1 Seconds
0:00:05:00 (21): 1 Seconds
0:00:05:01 (22): 1 Seconds
0:00:05:02 (23): 1 Seconds
0:00:05:03 (24): 0 Seconds
After Effects warning: Could not create the file 'C:\Users\Matthew\Desktop\Youtube Stuff\ObeyRC\Sequence\1\cinematicsPre 2_00154.png'. Access was denied.
AEGP Plugin PNGIO Support: Unable to create PNGIO. (5027 :: 12)
After Effects error: cannot close a closed file. (3 :: 5)
11/8/2014 9:35:23 AM: Finished composition “cinematicsPre 2”.
Total Time Elapsed: 25 Seconds
Log closed on 11/8/2014 at 9:35:23 AM

Can only see first and last frame of clip in the timeline HELP PLEASE

Hi, my first time and I did look for an answer, but can't find one. I have premiere elements 4 and I am trying out ver. 9. In ver. 4 the clips in the timelin shows all the frames, but in ver. 9 it only shows the first and last frame of the clips. Is there any way to make all the frames show. By "all the frames", I mean the clips fill with frames.I liked to see all the frames in the timeline, it is easier for me to select and trim the bits out.
My specs are Core 2 Duo 6750, Nvidia 8600GTS, 4G Ram, Vista Home Premium. 3 HDD 3TB.
Thank you for answering
Werner

As for the GUI, PrE had one more like PrPro (the early versions), up through PrE 3. With PrE 4, they streamlined the GUI (and some of the operation), and went with the "dark look." PrPro went in that direction starting with CS3, and now, the two programs' GUI looks more alike - darker. Personally, I like PrPro 2.0's brighter GUI. Now, one can alter the brightness, but the contrast can work against doing much of that - give me the lighter GUI....
The look of PrE 4 thru PrE 9 is very similar, though things have moved about some. Still the look is similar. Same for PrPro CS 3 through CS 5.5.
As for the trial, things have changed in PrPro, as of CS 5.5. Once, the PrPro trial was very crippled, but had no watermark. No more. No crippling, and still no watermark. The trial for PrE is far less crippled, but does have the watermark. We do not know what changes might be coming with the trial of PrE10. We will just have to wait and see. One great option that Adobe offers is the 30-day, money-back guarantee. If you buy Premiere (either flavor), and use it for 29 days, but do not like it, then you return it for your money back. This is the full-paid version (both flavors) with nothing crippled, and no watermark. Not that many companies make such an offer. Basically, on can use the trial for 30 days, to see some of the powers of the program, and then buy it, and try it fully for another 29 days. If not completely satisfied, they get their money back - essentially a 59 day trial.
Were I doing AVCHD, I would definitely look at buying PrE 9, and giving it a 29 day shakedown. The only caveat is that AVCHD requires a lot of computer "horsepower," and not all computers (especially if more than a year, or so old) are up to that task. I find it amazing that a consumer format, like AVCHD, requires more computer power to process, than most professional formats, until one gets up to, say RED 2K/4K. However, that is the nature of the H.264 CODEC, and by that, I mean all H.264, not just the AVCHD version.
Good luck and happy editing,
Hunt

HT1918 Trying to set up an Apple ID and iTunes accout everything is fine until I enter payment info then I get a message saying seek assistance apple support? Tried bank cards, iTunes gift cards and an American Express gift card? Help please!!!

Trying to set up an Apple ID and iTunes accout everything is fine until I enter payment info then I get a message saying seek assistance apple support? Tried bank cards, iTunes gift cards and an American Express gift card? Help please!!!

Click here and request assistance. That message means to contact the iTunes Store staff and not to post in these boards.
(95634)

Help Please! Offline Clips!

Ok here's my problem. I am using a clip of green screen footage that I have keyed out with two different backgrounds that I want to eventually layer on top of each other. Basically, it is the same clip on top of itself but with two different backgrounds. I can't keep them as is in the timeline because of the green screen effect. I got the clip with background 1 and exported it as a quicktime movie to my external hardrive. I then got the same clip, removed background 1 and inserted background 2 then did the same export process. I then imported the files back into fcp and they're fine for about ten minutes and then they turn white, as if they are offline. When I try to reconnect the media it says that they are online. Not only that, but they are unrenderable. I've tried this process many times and every time it's the same result.
Does anyone know what may be causing this problem and how to fix it?
G5

Because it is a green screen clip, once I key it out anything I put under it will show up. It's basically a clip with a still image behind it. I want the same clip with two separate images behind it. If there is an easier way to do this then please let me know. I'm not really that advanced with the software.
I also get this error message when re-booting"
The movie file "help please-FIN-00000001" cannot be found. Without this file, the movie cannot play properly
The name of my sequence that I exported the files on is labeled "help please"
Make any sense?

At the end of my IMovie I want to write some text: as in" Happy Birthday Mandy we had a great time with you. etc.. How do I go about this? Which icon in IMovie lets me have a place to write text?? help please

Please see my ? above: Im making an IMovie and need the last frame to just be text (can be on a color). I don't know how to go about doing this. Ive already done all my photos and captions. Need to have it ready for TOMORROW: Friday May 23rd. Help please!
Thanks

You can choose a background for the text from Maps and Backgrounds. Just drag a background to the end of the timeline, adjust to desired duration then drag title above it.
Geoff.

Little help please regarding deleting files and folders...

My wife has a MBP and has accumulated some old items in her documents folder that she'd like to delete. She has a USB mouse but the "right click" doesn't appear to work. She's running 10.4.11 and can't reveal the files in icon mode to facilitate dragging to trash. Certainly there is a sequence of keystroke commands that will allow these files to be effectively trashed, but our "control/delete", or "apple/delete", or "option/delete" doesn't do the trick after highlighting the subject file. Help please! TIA!

To delete a file or folder, high light it then using the keyboard type Command Delete and that will delete it. If you have multiple files and/or folders the same keyboard commands apply.
Regards,
Roger

Frames w/Text-like u can do in Windows Movie maker- Help Please

not referring to Titles. I want fames with text in them, sentences and short paragraphs. I was on this forum until 2:30 am trying to find similar and only 1, referring to typewriter that is in wmm they said on the old HDimovie download which isn't availabe and was 2006 anyway.
Where is the feature? How do I do it like in Windows Movie Maker
Also- how do I add portions of letters to videos, cut them out in paintshop save them a jpeg and upload as pic to insert into movie and make the viewing time longer so people can read it.
I need frames with just type , not just titles.
HELP, please.
Thank you

it takes 3 apps' to do it, and *****,, they don't all fit, u have to plan ahead, and u can't edit them in the timeline like u can with windows movie maker, and found out they had this imovie HD6, and took out although had to paste in text still meaning using another app for some of them.
I can't believe apple took it out to force you to buy FCE.
downdloaded HD6, but it not importing movies already imported to iphoto 09 that then imported to imovie 09, the cutting, editing clips is easier in '09, and I can;t find video turials on 06, except to pay for, only pdf hard for me to read take in alot of type, brain shuts off, neuro problems and brain damage.
just abbout had it with mac and which had sent it back in time, they said give me $500 to keep it, then didn't give that much, i think big mistake for me.
i sitll tryin to hold on abit here, i just posted in iphoto as well, fed up with it, it got it for imovie'09 doesnt even ahve the features i need, they took them out, everything drag drop import here there and everywhere.
not impressed.
but thanks for help, yeah already did that, the crappy key notes got in my vid, and on desktop, 3 app's to do ot it and drag/importhem them al over kingdome come to do what is so simpiple in wmm, and hd6 it appears.

Iframe redirect javascript help please

Hi:
My client uses a loan application on another service's site, and I embedded the form in an iFrame to keep the user on my client's site.
At the Submit of the form, it redirects to the client's home page, but it does it within the confines of the frame -- I want the redirect to go to the "top" Home page. Unfortunately, the offsite service cannot apply a target="_top" to the redirect link script.
The link is http://sequoiapacificmortgage.com/loan-application/
The service said this:
"The thank you page after the application and before the redirect URL has a unique URL.
Is it possible to code your iframe to recognize this URL and redirect the full site to your home page rather than depending on the vLender redirect within the iframe?
I am including the unique thank you page URL from Lori's website below, the ref_ID attribute is the unique application ID number assigned to my test application (the application ID's are generated using the first 3 letters of the applicant's first name [LYN for Lynsee] and the first 3 letters of the applicant's last name [TES for Testing] followed by the numeric sequence) but you should be able to remove that and have your custom site's code recognize the .php url which would trigger a redirect within your site's code that would take place before our system enacts its redirect to the home page within the iframe.
(https://www.vlender.com/apps/templates/new_thank_you.php?ref_id=LYNTES998262971)"
I have seen several references to Javascript to accomplish the desired redirect, but I am not sure how to construct it, nor if it can capture the presence of the mentioned URL to trigger it.
Can anyone help please? Thanks much!
Rgds, Ned

You are talking about JavaScript - Java and JavaScript are two completely different things. Therefore, this is not the correct area to post that question.

I can't setting 480p rightly working in adobe premiere pro, need help please.

hi,
i use premiere po and wish work in 480p (854x480).
All my stuffs created and rendered (3d animation and images) are in this resolution format : 854x480
In premiere pro, there is no 480p profil ! strange! why ?.. very disturbing !!
Then i select the avchd 1280p and decided to change the parameters preview to 854x480 and save the profil :
[IMG]http://www.michael-remy.fr/forum/901.jpg[/IMG]
[IMG]http://www.michael-remy.fr/forum/902.jpg[/IMG]
ps : What is red scared is what i don't manage to fixe or change !
But, when i make my export video (export media) i saw big borders around my video !
[IMG]http://www.michael-remy.fr/forum/900.jpg[/IMG]
In fact, my content have been threated in 1280x480 instead of 854x480p even the right size of my sources files !
Click here to see my workingspace :
[URL="http://www.michael-remy.fr/forum/903.jpg"]http://www.michael-remy.fr/forum/903.jpg[/URL]
what can i do ? i can't offord me to work in 1280p at source and don't want to upscale my 3d media source (bad quality result in upscale x2)
i check every setting screen, and there are several with 1280x720 i don't manage to change :
[IMG]http://www.michael-remy.fr/forum/904.jpg[/IMG]
any help please ?
ps : sorry for me expression, i'm french in fact...

all my footage is already feautred, i can't do it again.
Copy and paste your edited clips into the new sequence. Or, use the crop settings in the Export Settings window:

HP Pavilion a6000 desktop with Vista black screen - need help please!

I have an HP Pavilion a6000 desktop with Vista. Yesterday it was working fine and today we have the black screen that reads:
Award BootBlock BIOS v1.0
Copyright (c) 2000, Award Software, Inc.
BIOS ROM checksum error
Detecting IDE ATAPI device...
Found CDROM, try to boot from it...Fail
Detecting IDE ATAPI device...
Detecting IDE ATAPI device...
Detecting floppy drive A media...
Drive A error. System halt
I am not a techie, but looked at online forums and have tried f10 at startup with no change to the screen other than it stops after the first four lines and does not try the floppy drive. I also pulled out the round battery, waited and then reintstalled. Same problem.
Also, computer emits a single, repeating beep after startup.
HELP!

jjeahall
I saw your post and wanted to comment. I'm not an expert on these types of situations but did some digging around and found the following at Tips4PC.com.... read below
"There are two types of computer black screens that can appear in Windows. One where the computer will not boot up but you have a beep sequence sounding to let you know what the problem could be, and the other has nothing at all. No beeps, no cursor, no logo screen, and no choice to boot to safe mode or access the bios.
If your computer will not boot up and you get a beep sequence, I am not saying it is good news, however it is a step in the right direction towards solving this problem. This is a message from your computer that can be understood by looking up your bios (the brand) beep code. For example you may have an Award Bios, Ami Bios, Phoenix BIOS, Compaq, Dell, or Acer Bios. This list goes on and on. You can search for Bios beep codes in Google. Here is an example of results in Google search"
Link
Also I went into the Troubleshooting Guide for the A6000 and found the following information. You need to use F11 for recovery. See below
Starting System Recovery from system startup
1
Turn off the computer. If necessary, press and hold the On button until the computer
turns off.
2
Remove the HP Personal Media Drive if your computer includes one. Disconnect all
peripheral devices from the computer except the monitor, the keyboard, and the
mouse.
3
Press the On button to turn on the computer.
4
During the startup, do the following to enter the Recovery Manager program:
When the blue screen with the HP Invent logo appears, press the F11 key on the
keyboard. (You have only a few seconds to press the F11 key before the normal
startup process continues.)
5
The computer starts the Recovery Manager program; wait for the onscreen instructions
to display, and then follow those instructions.
6
Complete the computer startup, finish the registration process, and wait until you see
the desktop. Then, turn off the computer, reconnect all peripheral devices, and turn on
the computer.
I am an HP employee.
Regards,
Cooper56
If you’ve found this information helpful, please make it easier for others who might be experiencing a similar type issue by marking my answer as “Accept as Solution” .
***Of course you can also Click on “Kudos” STAR to say thanks!***
I work for HP. When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

Need a little help please Airport Express

Need a little help please.
I am trying to set up a wireless network at my home using Airport Express.
I have a regular phone line running in to I assume the modem. From there, there is an Ethernet cable running from that box to the back of the PC. My question is, I think, which of those do I unplug and plug into the Airport Express, the one on the back of the PC or the one that is in the back of the modem, or is this totally wrong.
Any help would be appreciated…
Thanks
In advance…
PS I have the manual but to me it is not very clear…

Your connection sequence would look like this:
Internet > Modem > AirPort Express >>>wireless to your computers.
This means that you would unplug the cable that is now connected at the back of your PC and move that connection to the AirPort Express.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Continue to follow the guided setup. On the third page, you will choose the option to "Create a wireless network" and continue the setup.

Running 10.5.8 Virus is attacking my address book. Help please.

running 10.5.8 Virus is attacking my address book. help please.

No it isn't!
There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
More useful information can also be found here:
http://www.reedcorner.net/mmg/

My ipad2 shuts down completely after I press the sleep button and does not start.... Help please

My ipad2 shuts down completely after I press the sleep button and does not start.... Help please
This started since the latest update!!!!!!!!!!!!!!

Hi Alkaf,
Welcome to Apple Support Communities.
It sounds like your iPad will not turn on. Take a look at the iPhone article linked below, it provides tips that will help resolve power issues for both iPhones and iPads.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
-Jason

Help, please! to stop animation of one symbol from anover or stage

I'm not a great specialist in jquery, but I've had to deal with it. And have some expirience... But i can't do an elementary thing in edge animate, i guess. So, help me please!))
I need to stop some child symbols from the timeline of parent symbol(or Stage). On the timeline of stage, i have trigger. At this moment all the child clips have to stop as one...
I try to insert into trigger this code:
(child clips names: 'stan', 'bizan', 'bak')
var stantostop = sym.$("stan");
stantostop.stop();
var bizantostop = sym.$("bizan");
stantostop.stop();
var baktostop = sym.$("bak");
stantostop.stop();
and I'm sure, I'm doing something wrong(!!!), cause nothing changes.
If you cant help, please advice me some source with a lot of examples of typical operations and commands like this! So thank you for reading!

Thank you very much for your answer. I,ve started three topics before i,ve got an answer!)
But I think I have some different problem
It is in the organization of my clips:
Stage->Ship_going->Ship_swinging->stan
Stage->Ship_going->Ship_swinging->bizan
Stage->Ship_going->Ship_swinging->bak
Stan(and overs) are the clips wich are looped, and thats why, I think they can,t stop.
(They are the flags of ship. And the problem is in that fact that when ship stop i want to stop all animation including the loop animation of flags, then I want to deleete all clips, but I cant delete this clips in the same way Icant stop them)
I can show the example of my clip for you(itis rather amusing)))) and i guess you shall understand what i'm talking about)))
Can I send you the zip with clip?
elainefinnell wrote:
Hi, Strashevsky-
You don't need to refer to the jQuery object if all you want to do is stop the timeline. You can simply do this:
sym.getSymbol("stan").stop();
OR
var stantostop = sym.getSymbol("stan");
stantostop.stop();
Hope this helps get you pointed in the right direction!
-Elaine

Seeking sequence timeline help, please

Similar Messages

Maybe you are looking for