Seeking what type & info for connector cable for W500 Digital or non-Digital Displayport to HDMI

Hello,  I have purchased and waiting arrival of:   Thinkpad W500 T9400 64Bit   4061-BV3  # xx-xxxxx  Windows 7 Prof.
I'm not sure if the port is Digital or non-digital.    I think the Lenovo site specs don't say "digital".  But a review on internet talks about it being digital.  Here is link to that.   You scroll down page for photo of ports.
http://www.notebookcheck.net/Review-Lenovo-Thinkpad-W500-Notebook.11683.0.html
Anyone know what cable I need to get?
I want to watch movie played from laptop onto my tv.   TV might be HD, but I don't care how movie comes up on screen, just so I can watch it.   What would be cable type to get?   I see that startech.com  sells these things.
Also, I see lots talk here about Audio.  If audio doesn't come through the TV, will it play through laptop?
Many thanks!
Massachusetts
serial number removed per forum rules    richk

PLEASE DISREGARD THIS POST/QUESTION.  I have obtained info from another Thread.
sorry.

Similar Messages

  • What is the best charging cable for the iPad Air (that is not made by Apple)? I need a long cable (over 6ft or more). I also need the cable to be of high quality and the cord part of the cable to be made of strong material.

    What is the best charging cable for the iPad Air (that is not made by Apple)? I need a long cable (over 6ft or more). I also need the cable to be of high quality and the cord part of the cable to be made of strong material. Apple does not make one this long. Is there a cable out there that is sturdy like this and is safe to use?

    yes, but I'm trying to use my iPad to type notes (using pages) and I have the smart case which I use as a stand. I need a cable long enough to fit through the back of my desk and the charging brick for the iPad won't fit behind the desk. I have to put it on the floor and then the apple cables aren't long enough to reach.

  • What type of disc is used for backing up itunes

    What type of disc is used for backing up itunes?

    You can backup your itunes library to whatever medium you like ( cd/dvd/flash drive/external drive/etc)

  • Need Power Connector Cable for ATI Radeon X1900 XT

    I need the 6pin power connector/cable for my ATI Radeon X1900 XT to work with my Mac Pro.
    I can't use the card as I lost the small cable pior to installation and now I can't find one anywhere.
    It is the 6 pin cable that connects into the Radeon X1900 XT and the other end into the Mac Pro motherboard.
    Can someone help me?
    Thank you

    Worst service ever at the local(Canada) Montreal/Laval Apple Store........''go ask ATI or call Apple, etc....''
    that was helpfull
    I go to Apple because it is an Apple card and I get service like I was asking for a PC.
    Typical of Apple, you buy their stuff then they turn your back on you in case that you need some help.

  • HT201180 What type of Fire Wire cable to use to connect MacBook Pro 2009 to tape-based Sony TRV720 camcorder

    What type of Fire Wire cable to use to connect MacBook Pro 2009 to tape-based Sony TRV720 camcorder

    USB is the slowest. Firewire is faster. eSata is the fastest (and will be superceded by Thunderbolt).  The old Fire was 4 pin (Firewire 400 and is essentially obsolete), new is 9 pin, Firewire 800.  All of the will transmit data, simply a different speeds.
    For eSata connectivity, you MBP must have an express card slot (and the appropriate eSata connection card) and you external enclosure must have an eSata input.  eSata cables will only transmit data, therefor it will require power by Firewire or USB cables.
    Ciao.

  • What are the audio connections/cable for the Express?

    I'm thinking about getting an Airport Express to hook up to my stereo. What kind of cabling is required and are there cable alternatives (mini to phone, mini to RCA, to optical, etc.)? Thanks.

    Depending on your stereo system, you will need different types of wires, if your stereo has an AUX input (Auxiliary) (Like the red and white plugins on TVs) You will need a Y Audio Cable, which basically has the headphone jack at one end, and the Red and White jacks at the other so all you will have to do is plug the headphone end into your airport express and plug the red/white into your Stereo. If your stereo doesn't have the AUX input, simple figure out what type of input it has and google or search an electric store for a cord that will work just right for you.

  • E-63 what type are Alarm Clock Tones for the clock

    when  try to set the alarm clock tone for the clock if I try to change Tone for alarm I only get optios for Download Default or off.   What type of tones do I need to download lor do they have to be in a special folder
    Thanks
    Message Edited by dougggg on 10-Nov-2009 05:47 PM
    Solved!
    Go to Solution.

    I can choose about a dozen (pre-installed) on my E63 in the alarm menu.
    Message Edited by hadimassa on 10-Nov-2009 07:29 PM
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • What type of 5 Free websites for Cloud Members?

    Hi
    Bouncing around Adobe's multi-page website nightmare I still could not find one answer to the type of 5 free websites a Creative Cloud member can get.
    On the Creative Cloud home page it says:
    Use Adobe's web hosting service to launch up to five websites. From basic online portfolios to complete e-commerce storefronts, our service makes it easy to launch your site.
    Checking further I understand one can only get 5 BASIC site!!! so what is it?
    Cheers
    Micha

    Hi ,
    For Adobe Business Catalyst there is no phone support, and the live chat can be reached only from your site admin  -help & support area: http://screencast.com/t/4lgmni8u . If you reach Adobe support instead of Business Catalyst support, your issues might not been solved right away.
    At this moment a free site cannot be upgraded, nor deleted. As an workaround, if you need a different plan, you should republish that site using a different site name, and then please contact us http://www.businesscatalyst.com/contact and we will change it for you.
    A delete button will be soon available for the free sites, with our new release.
    Best regards,
    Aniela

  • What type of storage is needed for iTunes U

    We are getting up and running iTunes U on our University and we are running into the issue of what type of storage we need to provide for iTunes U, i.e. (web share, afp share, smb share. If you could let me know or point me in the direction i need to go it would be greatly appreciated.
    Thanks,
    Scott

    Hi Scott,
    The [administraton guide|http://deimos.apple.com/rsrc/doc//iTunesUAdministrationGuide/Introduction /chapter1_section1.html] doesn't explicitly state what type of server is necessary, but given that iTunes U is based on RSS feeds, a Web server would be a good choice for hosting your content (much like hosting any podcast).
    Hope this helps,
    Shawn

  • What type of BufferedImage is needed for 24 bit image data

    Hello, i am using an image processing api, i have a 24 bit image data, i want to form a BufferedImage and set its pixel values with my data such as
    BufferedImage image = new BufferedImage(w, h, what type?);
    WritableRaster raster = image.getRaster();
    int[] imgpixels = ((DataBufferInt) raster.getDataBuffer()).getData();
    for (int i = 0; i < image.getHeight() * image.getWidth(); i++)
    imgpixels[i] = ((myArray).getRed()) << 16 | ((myArray[i]).getGreen()) << 8 | ((myArray[i]).getBlue());
    Then i will save the Buf. image to file as png. So what type of BufferedImage do i need?
    Regards.

    what is the reason when i read a 24 bit png image...it shows the type as 0 (TYPE_CUSTOM) ?
    From the the Field Detail section for the TYPE_CUSTOM field in BufferedImage: the image type is not recognized.
    You could make a new BufferedImage with TYPE_INT_RGB, or TYPE_INT_ARGB if the image has or will have transparent pixels, and copy the TYPE_CUSTOM image into it. Then you can manipulate/process the new image.

  • What type of licence to buy for a strictly Remote Desktop environment only?

    Hi there,
    I have a question about Server 2012 licensing for a specific operating environment. We have a single server in our company hosting our accounting and inventory software. Our software vendor allows us to use Remote Desktop Connection to connect to the server
    and use the software without needing to install individual copies in each user's machine.
    I also understand that Windows Server 2012 comes without pre-packaged CALs like how it used to be with Server 2003/2008 (where it came with a server licence and 5 CALs automatically).
    What's the appropriate licence needed for a usage environment like this? I am pretty sure we have to purchase RDS licenses (previously Terminal Services License) for each machine, but must each license be accompanied with a regular Client Access License? Our
    accounting software is unlike some other setups where the data is hosted on the server but all operating power is focussed on the client PC. In our scenario, all work is done exclusively on the server.

    Thanks for the replies. I have finally found a definitive answer on the Microsoft website (after a few days of virtual digging).
    http://download.microsoft.com/download/6/B/A/6BA3215A-C8B5-4AD1-AA8E-6C93606A4CFB/Windows_Server_2012_R2_Remote_Desktop_Services_Licensing_Datasheet.pdf
    And I quote for the benefit of everyone else looking for the same answers:
    "While RDS is shipped with Windows Server software, it is licensed separately through a Client Access License (CAL) model. This means that each accessing end point (i.e., a User or a Device) must be covered by an RDS license to access Microsoft VDI infrastructure.
    And this CAL is an additive CAL, which means that in addition to a Windows Server CAL, customers must acquire a Windows Server RDS CAL for each user or device that:
    - Directly or indirectly accesses any of the RDS product functionality, and/or
    - Directly or indirectly interacts with the graphical user interface of the server software using RDS functionality or other third-party technology
    For example, to access RDS functionality in Windows Server 2012 R2, Windows Server 2012 CALs and Windows Server 2012 RDS CALs are required along with the server software licenses."

  • What type of cabel is suitable for hdmi connection for my 2011 macbook pro 15'

    hi, do u know what type of cable should I buy to connect HDMI cable to my macbook pro 15' 2011? 

    Something like this one that includes audio: http://eshop.macsales.com/item/Newer+Technology/CBLMDPHDMI/

  • What type of column to use for this situation in SharePoint 2010?

    Hi there,
    In a SharePoint 2010 list - I have to add a few columns which need users to pick a numeric value and it's unit of measurement. E.g.
    - 30 (Inches/ft/cms)  <-- Here 30 is a number field and then a dropdown to select a unit.
    An option is to create two columns (1st - Number type and 2nd Dropdown with Inches/ft/cms values).
    But I have a lot of such sets in the same list and am not sure if above is the best way to go?
    Are there any other options for me? Is a Site Content Type a good option? Anything else?
    Thanks.

    Hi,
    I can think of two ways that you can accomplish what you are trying to -
    1. Content types could be a way or Create Site columns and prepopluate the values in these columns and use it in your list
    2. create custom column (C#) see here for more info -http://msdn.microsoft.com/en-us/library/ff648469.aspx
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if the reply helps you

  • What type of file is accepted for proof of purchase upload?

    I need to submit proof of purchase for a product purchased with Apple (hello Apple!!!) but it wont accept any type of file- ive tried about 6 or 7.

    what is the reason when i read a 24 bit png image...it shows the type as 0 (TYPE_CUSTOM) ?
    From the the Field Detail section for the TYPE_CUSTOM field in BufferedImage: the image type is not recognized.
    You could make a new BufferedImage with TYPE_INT_RGB, or TYPE_INT_ARGB if the image has or will have transparent pixels, and copy the TYPE_CUSTOM image into it. Then you can manipulate/process the new image.

  • What types of things require reprompt for refresh of display?

    BAM streaming table seems to require "reprompt" for the data to actually show up. I am using 10.1.3.3 BAM. The data comes from BPEL BAM sensors. Some of it shows up without clicking reprompt, other types require I click that button. If I wait for it, I have to wait a long time (many minutes), if I reprompt it shows up right away.
    It seems that "inserts" show up right away, upserts/updates are late and/or require reprompt.
    anybody else see this, or now how to fix it?

    No reprompts are required with BAM.
    The Streaming List is optimized for Inserts only. So you need to use the Updating Ordered List in order to see updates and upserts.
    Summary for the 3 types of List Views
    * Streaming List - only inserts
    * Updating List - only updates
    * Updating Ordered List - inserts, updates & deletes
    Regards, Stephen

Maybe you are looking for