Seeking ZDELTEXT correction report that is part of SAP Note 496577

Hi -- can someone please tell me where I can find the above mentioned report? It is suppose to be attached to Note 496577 but I am not finding it there.
Thanks

Hi,
if you display the "Correction Instructions" you will find it there.
Best regards.

Similar Messages

Mail hangs when it receives a report that an e-mail could not be delivered.

Hi Guys :o),
One bug which is really bugging me is that every time I receive a bounced e-mail report, with a subject line containing words to the effect of:
"Undeliverable. Return to sender."
or:
"The message could not be delivered."
Mail is unable to pull any subsequent e-mails down from the POP server.
So I junk the report, and then I delete it.
However, lo and behold, the errant e-mail is INSTANTLY back in my Inbox, plus there's now AT LEAST one copy in my Mail Junk, and also AT LEAST one copy in my Mail Trash.
Round and round I go, junk, delete, junk, delete, but the errant e-mail refuses to go away, and Mail continues to be unable to pull any new e-mails down from the POP server.
Eventually, Mail just hangs, with a spinning disk.
Even a force quit and relaunch of Mail doesn't resolve the spinning disk.
The errant message just sits there, REFUSING to be deleted.
The only way to get round this bug is for me to go up to my POP server, delete the report, and then PURGE DELETE the report - on the POP server !
I then have to go in to my Mac, and go:
--> Users --> Home --> Library --> Mail --> Account --> Inbox, Junk, and Deleted
and then manually drag ALL copies of the report into the trash on the Desktop.
It happens so often (pretty much every day) that I've had to create a shortcut in my Dock which leads straight to the Account folder.
Mail has always been buggy under ALL versions of OS X, but this ongoing bug drives me crazy, mainly because there's NO logical reason for it.
Just because I receive an e-mail message from the Hotmail server, for example, which says that my e-mail could not be delivered, usually because the recipient's inbox is full, or because no such address exists, on paper, that's just another e-mail which Mail is pulling down from the POP server.
However, EVERY TIME I receive such a report, Mail hangs.
I'm reluctant to rebuild my Mailboxes, in case I lose any messages, but I will if you advise it.
Any workaround would be gratefully received.
With best wishes to everyone in the Apple community, especially those on the Infinity Loop.
In particular, I wish Mr Jobs a very speedy recovery.
Cool,
Michael T
London, England

Quit Mail, Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup

How to refresh Report viewer web part programatically using C# in SharePoint?

I have used Report viewer web part in SharePoint page, I want to refresh it programmatically. How can I achieve this? I have tried approach mentioned on
http://nicholasfaiello.wordpress.com/2012/12/28/report-viewer-web-part-programmatically-refresh-a-report/ site, but it is not working.

Hi,
How about using JavaScript to perform page reloaded or just trigger the click event of the refresh button with the Report View Web Part? It could be seen as a kind of workaround
for auto refreshing.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b0b6d11d-07c8-4b4d-bd69-ec60e85e0678/sharepoint-report-viewer-web-part-parameter-issue-not-refreshing?forum=sharepointgeneralprevious
http://richmintzbi.wordpress.com/2011/06/21/auto-refresh-ssrs-reports-part-ii/
Best regards
Patrick Liang
TechNet Community Support

Need to restore an individual report that was deleted

Hi All,
One of my client is trying to retrieve an individual report that was deleted.But could not find an option for this.
Reports 7.2.5.311 What to do if a report or folder of reports is deleted? We have a report we are trying to retrieve and do not see an option for this. Should we have a system in place to make single report restores?
Product version: 4.0.5.3.00
Microsoft Windows Server 2003
SQLServer
Please suggest.
Regards.

Once you press delete in Hyperion Reports it asks you if you want to delete it, if you answer yes then it disappears .... theres no recycle bin in HR.....
Its iether time to go to a backup from a time the report still existed.
You could take a backup of your current db, temporerly restore the DB where your report existed, extract your missing report then put the current DB back and load in your report .... you could also just restore your DB in a vmware image and then extract your missing report from there.
You could always log an enhancement request for a Recycle Bin feature to be included.

Powershell reports that AD group doesn't exist (but it does)

Starting about two weeks ago, my Powershell script to verify that groups exist before attempting to add a user to them has started reporting that a particular group does not exist, even though it does.
It's not a new group, it doesn't have a horrific number of members, it's set up the same way as similar groups, has been around for a long time, has the same properties as similar groups, it's not disabled, etc. From the AD side I can see absolutely
nothing wrong. I can add users to it with no problem. And yet Get-ADGroup insists that it doesn't exist.
I know this isn't a Powershell failure because it's accurately finding every other group. It's just this particular one.
I did notify our "AD guy" but he hasn't had time to look into it. I'm hoping that I can get a jump-start on identifying and thus fixing the problem by posting this question.
I apologize for the lack of detail - I'll be happy to provide more info if I know what you need!

Does this happen from all computers running powershell or just one? Are you using the full dn when referencing the group
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:
It is happening to any user on any computer. We're not using the full dn - the cmdlet used is "get-adgroup 'admin-mke'. Interestingly though, when I tried the dn instead, it does find the group: get-adgroup -identity 'cn=admin-mke,ou=exchange
groups,dc=na,dc=qb,dc=llp'.
Does that suggest that it IS a Powershell issue after all? It's just strange because it used to work, and all the other groups can be found with the simpler cmdlet.

Report that is Cached

I have a report that is set to cache (not cached by user but cached) for 10 minutes. However on the page I want to run an operation that will dramatically change the cached report. Is there a way that when I run the procedure I can make a function call or something and expire the cached report so that it will immediately refresh on the next page load instead of waiting for the timer to expire?

David,
Try calling the procedure apex_util.cache_purge_by_page:
procedure cache_purge_by_page (
    p_application in number,
    p_page         in number,
    p_user_name    in varchar2 default null)Scott

In need of a report that will list all vendors for all parts in our plant.

Can anyone tell me if there is a report in SAP that we can use to list all suppliers for a given material? We are operating in SAP ECC6.0 and need a report that will list all vendors that the company has used for a given part. Is there a standard report in SAP that pulls information from purchasing info records? Woud this be a custom report? I have tried using MCE3.
Also does anybody know of any SAP consultants that can help us create custom reports

For the list of vendors for the material - Me03 if source list is maintained
For list of vendors with info record - Me1m
For list of vendors with PO - Me2l
If you can give the correct requirements then your Technical consultant will develop a report in the required format.

Newby question: I have a report that is featured and is available for Q&A and now I want to display this functionality in a web part of a site...

Hi,
I have a report that is featured and is available for Q&A and now I want to display this functionality in a web part of a site.
I am using a trial right now, so I am not sure if I have all the necessary licences, but I am really new to this subject so a link to msdn page or blog item might already do the trick.
This is what I have right now:
https://www.youtube.com/watch?v=rV2_m4iWxSE
Thanks

No that is not currently available.
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

What does the community recommend as an appropriate response in light of reports that "an estimated 600,000 or more Macs are currently compromised and part of a massive botnet thanks to the Flashback Trojan." Is Apple taking steps to mitigate the threat?

What does the community recommend as an appropriate response in light of reports that "an estimated 600,000 or more Macs are currently compromised and part of a massive botnet thanks to the Flashback Trojan." Is Apple taking steps to mitigate the threat?
See article in PC World at: http://www.pcworld.com/businesscenter/article/253403/mac_malware_outbreak_is_big ger_than_conficker.html
I have a MacBookPro and my wife has an iMac. I assume both are equally vulnearble.
MLSCOS

There are checks one can perform to see
1: If any of their machines have been seen on the Flashback botnet
http://public.dev.drweb.com/april/
2: Terminal commands to see if their machine is infected (use copy and paste, then press enter)
https://www.f-secure.com/v-descs/trojan-downloader_osx_flashback_i.shtml
3: Preventative methods to avoid becoming infected.
Update Java via Software Update.
Disable Java in all your web browsers preferences (notice Java is not Javascript)
Check your status of all browser plug-ins
https://www.mozilla.org/en-US/plugincheck/
Firefox + NoScript add-on + Temp Allow All Button on Firefox's toolbar to turn on scripts only on sites you trust.
Learn how to make bootable clones, this way a complete erase can occur and a reverse clone done.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents
4: Resources if one is infected
Data Recovery, wiping entire machine, reinstalling OS X, returning clean files, etc.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

One report that will print two reports.

Post Author: garling
CA Forum: Crystal Reports
Normal
0
false
false
false
MicrosoftInternetExplorer4
st1\:*
/* Style Definitions */
table.MsoNormalTable
     {mso-style-name:"Table Normal";
     mso-tstyle-rowband-size:0;
     mso-tstyle-colband-size:0;
     mso-style-noshow:yes;
     mso-style-parent:"";
     mso-padding-alt:0in 5.4pt 0in 5.4pt;
     mso-para-margin:0in;
     mso-para-margin-bottom:.0001pt;
     mso-pagination:widow-orphan;
     font-size:10.0pt;
     font-family:"Times New Roman";
     mso-ansi-language:#0400;
     mso-fareast-language:#0400;
     mso-bidi-language:#0400;}
I need to create a report that has two parts; the first part will contain the details of the transaction, second part will contain a place for the client to sign. I have the report completed but need the first part to print, have printer cut the paper then print the second part of the report. Is there a way to do this within one report?I have Crystal 10

Post Author: garling
CA Forum: Crystal Reports
Sorry above message is not showing correct: I need to create a report that has two parts; the first part will
contain the details of the transaction, second part will contain a
place for the client to sign. I have the report completed but need the
first part to print, have printer cut the paper then print the second
part of the report. Is there a way to do this within one report?I have Crystal 10

SharePoint Report Viewer Web Part Parameter Issue

I'm using the SharePoint Report Viewer web part to display a SSRS report that I have created in a library. Reporting Services is integrated into my SharePoint farm. The report I am displaying has a single parameter that needs to be set.
When I select it and hit "Apply" the "Specify Parameter Values" text disappears, but it doesn't display the report. If I edit the web part the data loads based on the parameter.
I don't know why the apply button is not causing the report to reload.
Any ideas?

If I specify a default, it loads correctly. When I select a new parameter and hit apply the report no longer works though.
I don't think this is a browser issue. Even if it is my company uses IE, so if it doesn't work for this then it won't work period.
I'm pretty positive it is an issue with the Reporting Services web part not posting anything when Apply is hit. Every other case of using the report doesn't have any issues other than when it is in the web part.

SQL Server Report services web part will cause lost page title

Hello,
I have a SSRS web part in my Sharepoint 2013 page, but I found the page title always lost after report load completed. I have checked the js code by debug, I found this is being caused by internal javascript executed by Sharepoint.
The code as below:
Sys$WebForms$PageRequestManager$_parseDelta(executor) {
>var reply = executor.get_responseData();
the code get pageTitle info is null, so cause page title lost.
Can anyone help please?
Thank you

Hi Brysk,
Is there any difference between the problemaitc page containing the webpart and other working wiki pages for showing the title name in IE tab?
The IE tab should show the information in tag<title> of the page, please check if it is correct for that page (using F12).
Also check if it is related to IE browser compatibility issue.
Thanks
Daniel Yang
TechNet Community Support

SharePoint 2013 SQL Server Reporting Services Report Viewer (Web Part) - IE Tab Title

Hi,
We are using a wiki Library to create page with SQL Server Reporting Services Report Viewer Web Part.
Everything is working great except for the Internet Explorer tab, instead of giving me the name of the Report it is showing the name of the web application. All the other wiki pages is working fine.
Regards,
Social Technet Microsoft.

Hi Brysk,
Is there any difference between the problemaitc page containing the webpart and other working wiki pages for showing the title name in IE tab?
The IE tab should show the information in tag<title> of the page, please check if it is correct for that page (using F12).
Also check if it is related to IE browser compatibility issue.
Thanks
Daniel Yang
TechNet Community Support

PO reporting that can capture PO number, PO value and cost center

Dear SAP expert and gurus,
Would like to seek for your professional advise and consult on which report in MM that can capture the PO number, PO value and cost center.
Kindly advise.
Thank you
Regards
Leonard Tan

ME80FN is a good report that captured the PO number and amount. However, the cost center is not being captured here. is there any suggestion?
ME2K is not an ideal report to user cause, user requires the data to be shown in one line instead of 2 to 3 line.
Is there any report like ME80FN can be captured PO number, PO value and Cost Center.
Thank you
Regards
Leonard Tan

Aging reports that display reconciled transactions

Currently ie 2007a PL 35, when an aging report is run that displays reconciled transactions it is displaying all reconciled transactions including those reconciled before the aging date. My understanding of this feature was that it was intended to allow clients to run past dated aging correctly and for totals it does. However I have a client who works with detailed aging extensively and they would like a feature that would allow an aging report that would only show open balances that had been reconciled after the aging date. would it be possible to implement this into the current aging selection criteria?? It would help clients produce more accurate historical aging reports.
Regards,
John-Michael

Which SAP B1 Version and Patch is under use at your end ?
There were issues in SAP B1 regarding reconcilliations in versions prior to 2007 series.
Samir Gandhi

Seeking ZDELTEXT correction report that is part of SAP Note 496577

Similar Messages

Maybe you are looking for