Seemless transition between similar clips with missing frames?

Hi,
I am working with a long clip of someone talking and I am trying to remove certain words/sentences from the speech. Does anyone know of a transition that works better than Cross Dissolve for making it seem like nothing has been removed from the original clip? When I use cross dissolve, it blends the cut together and looks okay, but I just wanted to check to see if FCP has something better that I might want to use.
Thanks!

Do you ever watch those "World's Greatest Explosions/Car Crashes/Natural Disasters..."? You know, the shows that package a 7 minute segment using two :10 sec. shots of the same action?
They'll zoom in slow, then cut back to normal frame size, or cut to the same shot, only scaled up 30%, or pan n scan the image, or 'flop/flip' the image so it looks like a different camera angle...(drives me nuts watching this, but pretty creative use of limited material.)
Obviously, your content may not look natural with this type of binga, banga, boom...zip, zoom, flash type effects...but sutble use of the effects might give you what you're looking for.
Jump cuts are a challenge when you don't have cover footage. But done with some thought and attention to what style fits your interview piece, you might get something that works.
The scaling might be the primary issue, depending on your format. HD will scale alot better than DV/SD. But if you're working with HD for SD delivery, you'll have a bunch of leeway for scaling and pan n scan.
K

Similar Messages

How do I add a transition between every clip in Premiere Elements 11?

Greetings -
Folks, I'm looking for a feature that even the cheesy old Windows Movie Maker used to have. I'm trying to figure out how to get Premiere Elements 11 to add a transition between every clip via some shortcut/quick means. I find it obnoxious and inefficient that I need to manually drag a transition between every clip. If I import 200 short clips that I took with my point and shoot camera, it'll take me over an hour alone just to put the transitions in place.
Is there any way to select a transition and have Premiere Elements add it between every clip? I've stumbled on the fact that you can click a transition and make it the "Default" but have not been able to figure out what that does for me.
Any help is appreciated.
Thank you.
Andy

CDR0920 wrote:
........... but the time was set by defaul as 0 seconds and I have not been able to change that. Tips???
I think trying Edit > Preferences > General > Video Default Transition Duration will fix it. Mine came with 30 frames set at installation.
Bill S

When applying a transition between particular clips it only applies to the end of the previous clip and will neither 'Center on Edit' nor 'Start on Edit'. I'm kind new to FCE 4 so please excuse my inexperience.

When applying a transition between particular clips it only applies to the end of the previous clip and will neither 'Center on Edit' nor 'Start on Edit'. I'm kind new to FCE 4 so please excuse my inexperience.

This indicates that you only have handles available on one side of the edit point. If the transition ends on the edit, that means that the next shop begins on the first frame of the media file and there is no room for it to extend and create the necessary overlap.
Click <a class="jive-link-external" href="http://www.fcpbook.com/Effects1.html">here</a> to find out how transitions work.

I can not copy a transition between multiple clips in premiere 12

Following the procedure described in the manual, I can not copy a transition between multiple clips in Premiere 12.
Premiere copy a single transition in the clip closer to the time bar.
I had tried in various ways but to no avail. The problem can be solved?
Thanks for the help.

Sig. T.T. Romano,
javascript:void(0)
I finally figured out that you can not copy a transition between multiple clips at the same time and it will copy one at a time.
What seems strange, however, because in Pinnacle, which I used until recently, this could be done, and Adobe is not less than Pinnacle.
Maybe Adobe does not consider interesting this thing, or maybe it is inserted in Premiere Pro. How, for example, in the titles, the ability to animate multiple lines. In Premiere Elements missing but I knew that in the Pro's.
I thank you anyway for your helpful answers.
Vincent Chiti

Transitions between split clips don't work properly

If I split a clip in the project area, then put a transition between the two new clips, the transition doesn't work properly. It is most obvious with the Cross Dissolve, which doesn't work at all. Some of the others sort of look like they are working, but if you look closely, they are not working correctly- i.e. not in the same way that transitions between two clips dragged separately to the project area from the events area work.
Any one else notice this, or better yet, have a fix?

OK- I discovered a work-around.
In the project area if you select the split part following the transition, Cut it (Command x) then Paste it (Command v) back in the proper place, the transition works properly. Usually cutting and pasting the following half of a split clip fixes the transition, but sometimes I have to cut and paste both the part before the transition and the part after it to get things to work right.

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Is there a way to apply the same transition between all clips?

Or is there a way to apply random transitions? Either way I'm too lazy to drag a transition between every clip and hope there's a bulk way I haven't found yet. I'm using iMovie HD 6.0.2 (267).
Thanks!
--Daniel

Daniel,
To apply the same transition between all clips, select all the clips, select the transition (and timing) then click ADD (at the bottom right of the transitions screen). The transitions will be rendered, one at a time between all the clips. If you wish to change the transition, again select the required clips, select the new transition, then click UPDATE.
I'm not aware of any way to apply random transitions.
John

Dropped frame warning after adding 3d video transition between 2 clips....

Hi all,
I have the MBP in signature and after making a very short sequence with 2 small clips (obtained by the same master clip, from/on my SSD, that is 640x480 / 10fps with AppleOPEN DML codec) between which I insert a 3D video transition (cross zoom), if I press the space bar for preview (with unlimited RT setting + dynamic setting for playback and frame quality) I get the dropped frame warning as soon as the playhead reaches the 3D transition in the playtime....Is this normal even with my very new MBP specs???
Note that I am currently on battery and not on charger (--> the GT330M is gently underclocked).
May you please advise?
Thanks
Emanuele

Hey there,
First of all, FCE doesn't support your media. You should really use something like the free [MPEG Streamclip|http://www.squared5.com> to convert it to DV-NTSC with a frame size of 720x480, a frame rate of 29.97, and audio set to Uncompressed Stereo 48kHz. Edit the media in a DV-NTSC sequence within FCE.
After applying almost any effect you'll need to render it out to view it in real time. The shortcut is Option-R.

IMovie HD 6 - Cannot insert transitions between short clips

I am attempting to assemble a movie using several short (8-15 second) clips. When I attempt to insert transitions, I get the following message:
"You cannot apply a transition between very short clips. They must each be at least 3:49:16 long."
I assume they mean 3 min, 48 sec, 16 frames. I don't remember having this issue before.
Is this something wrong with my installation, or do you really need 4 minute clips?

No, your iMovie program is acting strangely. For some reason iMovie believes that you are trying to insert a transition of almost 4 minutes duration between two clips of 15 seconds duration. (I can't recall any transitions longer than 10 seconds.) So it is giving you a message that your clips need to be longer.
When iMovie starts acting strangely, a commonly done procedure is this: Shut down iMovie and trash the file com.apple.iMovie.plist located in User/Library/Preferences. iMovie will create a new file on relaunch. Also, do a simple permissions repair using the Utilities/Disk utility application on your Mac. Then launch iMovie and see if your transitions work.
If your transitions still don't work, make sure that your Quicktime is updated to current version, and do a permissions repair like above after updating.

Harsh jumpy transitions between some clips

I have noticed inadvertent flashes and/or harsh transitions between some of the clips generated in a recent project. It is not as noticeable on my monitor, but more obvious when viewed from youtube. I am editing with 25 /1080p footage (MacBook Pro and events stored on a peripheral). Any advice on how to reduce or get rid of these flashes would be appreciated. Thank you for your help.
This is the affected footage on youtube - the problem is a little more noticeable after 10mins.
http://youtu.be/maKTyYmwX6M

OK- I discovered a work-around.
In the project area if you select the split part following the transition, Cut it (Command x) then Paste it (Command v) back in the proper place, the transition works properly. Usually cutting and pasting the following half of a split clip fixes the transition, but sometimes I have to cut and paste both the part before the transition and the part after it to get things to work right.

Relink project clips with different frame rate

Somehow the clips in my project sequence ended up with a different frame rate (25) than the original media files (23.95), and they are no longer linked -- maybe this happened during import from iMovie. When I try to relink project files to source media, I get an error message saying they cannot be relinked because they have a different frame rate. I changed the sequence framerate to 23.95 (by creating a new project with 23.95 as the frame rate, then copying and pasting the other timeline into it), but all the clips remain at 25, so the problem remains.
How can I change the clip properties to frame rate 23.95 so I can link to the original media?
Thanks.

The media got unlinked importing the project and events from iMovie to Final Cut.
I've attached screen shots with all the specs.

Same Transition Between Several Clips

I am producing quite a lengthy movie. Is it possible to select, let's say perhaps 20 photos, and insert a transition between ONLY those photos without affecting other movie clips and photos?

Exactly. I click, copy, paste and....nothing. Either the Fade to Color OR the SFX (it's a "Whoosh" sound) OR both at the same time. Nothing. Cannot figure it out. Looked into Pasting the Attributes but that didn't work either. Nothing gets copied. Nothing even shows up. Weird. Any ideas?

Applying the same transition between multiple clips

Does any know how to apply the same transition to multiple clips that are all ready in the timeline? I remember attending an Adobe Premiere Workshop years ago and I'm sure they demonstrated that technique. It's would be such a time saver. Perhaps it was a Final Cut Workshop.

Don't you get something like this:
That works perfectly for me. Have you updated to CS4 4.1?

Urgent Help Needed with missing frames

Hi guys
I have a student with an urgent problem that I can't seem to fix.
The student is making a film having shot it on mini DV tape. He has been editing the film in Adobe Premiere Pro CS5.5, editing sections in different sequences.
The problem he is having is when he moves a selection of clips on his timeline random frames or half frames disappear, leaving a very quick flash to black.
I cant work out why the frames are disappearing when moving clips up and down the timeline, any suggestions?
Thanks
SteveG

The settings for a sequence cannot be changed once it is created.
If source footage is being interpreted wrongly, right-click the source file on the project panel and choose Modify > Interpret Footage. You can now create a new sequence that matches the real properties of your footage.
Dragging one sequence into another won't cure the problem; you have to copy the footage from the timeline into the new sequence so it reverts to the new sequence frame rate (assuming the footage has been defined properly in the project panel it will then be correct).

Movie Clips with one Frame

If I have SWF's that I am using for UI elements in a game, and in these SWF's there are layers with Movie Clips and these clips have only one frame in them - do I need to explicitly put a stop() in there for optimal performance?
I'm curious if these movie clips sit there and loop with only one frame and in the end hurt the game's overal FPS
Any insight would be appreciated

please don't cross-post.

Seemless transition between similar clips with missing frames?

Similar Messages

Maybe you are looking for