# seems permitted but not in all_capital

Hi guys,
i was wondering that # seems to be an unpermitted character
not present in all_capital but the system seems to accept it.
Any help will be rightly appreciated.
Thanks

Hi,
You might want to take a look at the OSS note 173241.
Hope this helps.
Cheers,
Gimmo

Similar Messages

How do you move songs from an iPod to itunes? Seems basic but not so.

How do you move songs from an iPod to itunes? Seems basic but not so.

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
Recovering your iTunes library from your iPod or iOS device
B-rock

Display queue shows values but not in test tab

Hi,
We have a mapping scenario where we need to duplicate nodes and create the second node based on the coditions. The second node is a duplicate of the first node. The second node has the same mapping as the the node it was duplicated from. While testing the mapping in Display queue the values are coming in correctly for the duplicate node but during the testing in the test tab, the duplicate node values are missing. Context seems right but not sure why the duplicate node mapping does not work during testing?
Teresa

Hi,
you should map the source node of the duplicated node with the required condition . it means when the conditions is true the duplicate node (source node) should get generated at the output.
If <condition> True -
> creatIf --- > source node of duplicated node
Thanks
Jyoti

TS3899 can send email from my personal (aol) account but not from my work account. My email works fine on my lap top. I have contacted my IT department. They cant seem to fix it. any suggestions?

I have 2 eamil accounts on my iphone, one personal (aol) and one work. I can send email on my aol account but not on my work account. My email on my laptop works fine. I have contatced my IT epartment but they cannot seem to fix it. Any suggestions?

I have just encountered exactly the same issue for the last 24 hrs - mail goes to outbox from iPad yet send OK from icloud account on my powerbook. Tried resetting the push email settings on the iPad but no chnage.

I've tried to update my i-Tunes version after the site suggested I should following my i-Pad being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several

I’ve tried to update my i-Tunes version after the site suggested I should following my i-Pad Air being plugged into it for the first time. The update seemed successful but the program would not open at all despite switching off the PC and re-starting several times. I then tried wiping the original software from the computer and re-downloading from scratch. Each time I tried the download failed with a message saying “Service “Apple Mobile Device” failed to start. Verify that you have sufficient privileges to start system services” At this stage, the only way forward was to “abort” the download. This I have done now four times and the same thing happens. When I did finally manage to get an i-Tunes shortcut on my desktop, the program wouldn’t open saying: “i-Tunes was not installed correctly. Please re-install i-Tunes. Error 7 (Windows error 193)” Any ideas to resolve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Itunes doesn't seem to synch "wirelessly" with my iphone. It seems to work with emails but not photos / videos I've taken on my phone. Also, there is no "device" listed on itunes menu bar, only when connected via cables

My computer / iTunes is set up correctly for wireless (account info. all good), and emial is synched wirelessly. BUT not photos / videos or songs. I seem to have to plug my iPhone into my computer for iTunes to recognize my device. Shouldn't iTunes recognize my iphone wirelessly? For example, I have read that "device" should show up in menu bar on iTunes but it doesn't unless I'm cabled in.
Also, when I go to my iPhone to "synch wirelessly with iTunes", the button / tab doesn't light up for me to chose and tells me will synch when "smith - laptop" is available.....
This is my first iPhone, and just got it so may be user error.....
thanks

Did you build Elsa with this package from AUR: elsa-svn-arch
The way your elsa.conf looks like indicates to me that you have not.
Please use the package because you are also missing pam-files.

I do not receive all my e-mailson all my devices. I seem to get them all on my iPhone 5s, but not all show up on my iPad and iMac. they are all set up the same. Any Ideas on what is going on and what I can do to remedy this? thanks

I have an iMac with OS X Lion 10.7.5,an iPhone 5s with iOS 7.1.2 and an iPad with iOS 7.1.2. all software is up to date. My problem is I do not receive all my e-mail on all 3 devices all the time. I seem to get them on my phone , but not all show up on my iMac or iPad. Any ideas as to what is going on and what can I do to resolve this issue? thanks

On the iPhone, go into Settings -> Store and turn off "Automatic Downloads" for Apps (and Music and Books, if you wish). You can also do that on the iPad to prevent it from going in the opposite direction.
That will stop any automatic downloading... to prevent them from coming over when using iTunes, select the phone (under Devices), Apps, and then uncheck "Automatically sync new apps." Again, do the same for the iPad if you wish.

HT204053 How can I delete my iCloud account which I do not remember anything about the information that I entered about 4 years ago. It always asks my birth date but it seems I did not enter my correct date how can I bypass this question???

How can I delete my iCloud account which I do not remember anything about the information that I entered about 4 years ago. It always asks my birth date but it seems I did not enter my correct date how can I bypass this question???

You cannot delete the account from the server (partly to prevent the username from becoming available again and some-one else using it to pretend to be you).. Having disengaged your devices from it, go to http://icloud.com and delete any data in there such as contacts and calendars. Then just ignore it.

When i plug in my ipod nano (6th generation) a message comes up saying it's 'detected but not identified' i've spend like all day trying to solve it, uninstalled it, reinstalled it and nothing seems to work..

when i plug in my ipod nano (6th generation) a message on itunes saying the ipod is 'detected but not identified'- i've spent all day trying to fix it and nothing seems to work so i can't sync any songs..

Hello beafraser,
Here's an article to help troubleshoot when your iPod is detected but not identified.
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/ts3218
Hope that helps.
Thank you for visiting Apple Support Communities.
Nubz

How can I get iTunes running on Windows XP as well as a newer laptop running Windows 7 to both recognize my new iPhone 4S? It seems to work fine with Win 7 PC so far, but not at all with the XP OS separate laptop.

How can I get iTunes running on a Windows XP machine as well as, separately on a newer laptop running Windows 7 to both recognize and sync with my new iPhone 4S? I have different libraries on each machine which I need to sync with the iPhone, both in iTunes. It seems to be workiing fine on the Windows 7 machine, but not even reconizing the device at all in iTunes on Windows XP.
Thank you for your assistance.

Hi turingtest2 - thanks for the reply. As you say It is how it is - and I have three workstations in this home (not counting three for my children and one for the family) and I pretty much always have more than one OS on each - that's how it is for me. I shouldn't have to worry about how many OSs I have (or how often I change them) just to have music while I'm working - through the PC sound system that is. I never have to worry about any other software, only iTunes. Once in a while (in the past) I've made a vendor call if I changed to many things to often (like CPU, GPU, memory, etc - or even a replacement MB) - but that hasn't happened in a couple years (at least since Vista) so I think (hope) they have fixed that for good. And even then it was a quick call and problem resolved. The only (glaring) constant problem is iTunes - limiting my own use of my own music (by counting an OS as a physical PC). Even with VM (which is just another OS) - although you can Attach things to multiple active OSs - it's still your own (purchased) music - and all on one PC. Thanks again!

Hello, why is all of my music on my iphone but only a few songs on my itunes on my laptop? it seems like its not updating on my laptop because it still says i have credit and i know i that there isnt any please help thanks

hello, why is all of my music on my iphone but only a few songs on my itunes on my laptop? it seems like its not updating on my laptop because it still says i have credit and i know i that there isnt any please help thanks

If they are iTunes purchases that you bought on your phone then have you copied them over from it to your computer's iTunes ? If that is the computer that you sync the phone to then you should be able to copy them over by connecting it and doing File > Devices > Transfer Purchases. Or (depending upon what country that you are in) you might be able to redownload them directly on your computer's iTunes via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage.
In terms of your account's balance, have you tried logging out of your account on your computer (Store > Sign Out menu option) and then logging back in (it will change to a Store > Sign In option) and seeing if your balance changes ?

My mac book pro fell of my desk, everything seems fine, but the dvd drive is not working properly, any suggestions

My mac book fell of my desk yesterday. All seems well, but I noticed today that the dvd drive is not working properly, it seems to want to keep ejecting the disk even when the disk is out, and it won't accept dvd's any more. Any suggestions o fellow apple users?

Back up EVERYTHING, then take it in to have them assess for any latent damage. Wouldn't want a similar "delayed reaction" from the hard disk drive, would we?

HT201272 Hi guys...I have just got a new computer and want to get my library back up and running on it. However I seem to be missing some of my iTunes music purchases. Any ideas on how to get them back? They show up on my ipad but not my actual itunes acc

Hi guys...I have just got a new computer and want to get my library back up and running on it. However I seem to be missing some of my iTunes music purchases. Any ideas on how to get them back? They show up on my ipad but not my actual itunes account.

Hello there, Capricious13.
There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Leading in Pages. I've just discovered that different typefaces seem to have different auto-leading in Pages. I am used to default leading being 120% of point size, but it seems this is not so any more. The same text in 10pt Times New Roman, which I would

I've just discovered that different typefaces seem to have different auto-leading in Pages. I am used to default leading being 120% of point size (or some consistent rule), but it seems this is not so any more. The same text in 10pt Times New Roman, which I would expect to line up with 10pt Palatino, for example, doesn't. I've tried using the inspector, at least to get both faces to behave the same for given settings, but I haven't been able to. How much control does Pages allow for this type of settings, and are there any hidden secrets as to how to do so? Many thanks
Message was edited by: Just me then

If you set the line spacing in the inspector to Exactly and 12 points for 10 point type, it will work the way you want.

TP3 - Generic JDBC Seems Not Working - Connection Worked in TP2 but Not TP3

I had a connection working in TP2 to a PosgreSQL database. I have done in TP3 exactly what I did in TP2 to set up the connection but the connection test fails listing the name of the driver.
I put the JAR in jdev\lib, I added a class/library to the default project properties with the classpath listing the location of the JAR including the filename, then I created a new connection with the same driver name, user/password, and JDBC URL I used in TP2. None of this worked though. I even tried restarting JDeveloper.
Any ideas on what I could be doing wrong or if something new needs to be done in TP3?
On a side note, although I got the connection working to the PostgreSQL db working in TP2, JDeveloper was never able to find its tables like when creating an entity from a table for example. I know this is not an issue with the driver JAR because this works flawlessly in Netbeans 6.
Thanks in advance for any help.
KurzHome

Hi CM and Chris,
I have the exact same problem when I tried to create a connection to SQL Server 2005 using Generic JDBC. It worked well for TP2 but does not work for TP3. Further more if you create it anyway, you will get following message in testing:
An error was encountered performing the requested operation:
com.microsoft.sqlserver.jdbc.SQLServerDriver
Vendor code 0.
I tried to export the working connection from JDeveloper 10.1.2. and import it to TP3. I could not solved the problem.
Then I export the SQL server connection from TP3. The connection is expressed as
<Reference credentialStoreKey="yuwyuw" className="oracle.jdeveloper.db.adapter.DatabaseProvider" name="yuwyuw">
<Factory className="oracle.jdeveloper.db.adapter.DatabaseProviderFactory"/>
<RefAddresses>
<StringRefAddr addrType="subtype">
<Contents>thirdParty</Contents>
</StringRefAddr>
<StringRefAddr addrType="user">
<Contents>yuw</Contents>
</StringRefAddr>
<SecureRefAddr addrType="password"/>
<StringRefAddr addrType="driver">
<Contents>com.microsoft.sqlserver.jdbc.SQLServerDriver</Contents>
</StringRefAddr>
<StringRefAddr addrType="DeployPassword">
<Contents>false</Contents>
</StringRefAddr>
<StringRefAddr addrType="customUrl">
<Contents>jdbc:sqlserver://host:1433</Contents>
</StringRefAddr>
</RefAddresses>
</Reference>
It seems DatabaseProviderFactory could not create connection other than Oracle. BBut JDev10.1.2 does not use Factory class. I tested Driver and URL by a small program that created a connection using connection string. No problem at all.
Now I have 2 questions:
1)How can we access the source code to see what happens when we submit connection creation request?
2)You mentioned that we can swap JVM version. But this can only be done on project level. Can we do it on IDE level, because IDE connection is not associated with any project.
Thanks,
wyuwyu

# seems permitted but not in all_capital

Similar Messages

Maybe you are looking for