Segment: 3.314 date comes after end of valid factory calend

Hi all,
One infopackage load failed while extracting data from R/3 to system t oBW .
The failed message show
+*Errors in source system +
+Segment: 3.314 date comes after end of valid factory calend+
Can any one help me how to rectify this error

Plesae share any inputs on below error
puru

Similar Messages

61 062 & date comes after end of valid factory calendar. (Please correct)

Hi Experts,
I am Getting the Error in Creating Purchase Order:
Error Message No. 61 062 & date comes after end of valid factory calendar. (Please correct)
Please suggest.
Regards,
Ashok

I got a Solution For this. Actually User has Maintained Wrong Planned Delivery time in PIR for the Same it was Behaving like that.
Thanks

End of Valid Logistic Calender error while creating Sales Order

Hi,
While creating Sales order in VA01 the following error message comes for particular material code for a particular site only:
24.01.2202 date comes after end of valid logistics calendar. (Please
correct)
Message no. 61062
Can anyone suggest on the same.
Regards
Nilofer

Hi,
The input value given in Sales order is " Req Delivery date: 31.03.2012", but the error comes with the below date such as
"24.01.2202 date comes after end of valid logistics calendar.(Please correct)"
We also face one more error such as
" Incorrect index structure for table XMVERF_POS/0000224110/000040 ".
From where system is taking 24.01.2202 date?

PARAMETER_EXCEPTION: Start date is after end date

WORKLOAD ANALYSIS (PORTAL ACTIVITY REPORTING) : PARAMETER_EXCEPTION: Start date is after end date.
Hello,
We get the above exception when we analyzed the extractor framework logs for EP Workload analysis extractor.
Can someone please advice.
Thanks
Srikanth M

Hi Nacho,
Could you please check if the Solution Manager time format for the user used for the Workload analysis is same as that of the monitored system. This error was caused in our landscape as the format in the monitored system was having a dd.mm.yyyy and that of the user in solman was mm.dd.yyyy. You can check the same in the transaction SU01 --> Change/Display --> Defaults tab --> Date format.
Thanks,
Lijin Xavier

User not disabled after end date (9i)

Hi All,
The Disable after end date schedule task disabled 7 users but did not disable 1 user.
Any know issue around this.
Thanks
Don

Hi Gyanprakash,
i can not try disable manually, its in production. The log for disable user is commented in log.properties. Can not change that .
Just need to analyze, why this user was left out.
Regards
Don

I've forgotten the end of my ePrint email address, i.e. the part that comes after the @ sign. Help!

I've forgotten the end of my ePrint email address, i.e. the part that comes after the @ sign. Help!

Hi,
Shoule be @hpeprint.com
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Process Chain running even after end date

Hi,
We are scheduling month end PC to run every 2 hours and also we have given end date for today evening.but process chain runs even after end date for every 2 hours.so we have to manually remove it from scheduling.
Any method how can PC stop on its own after end date .
Any help highly APPRECIATED
Thanks
Nilesh Pathak

There might be multiple release jobs for thie process chain.
So check the same. Right click on process chain --> Display scheduled jobs --> Here all the jobs logs of the chain will be available.. So check the same here...
As you have descheduled it now.. probably you may not be having it as the first release job might be moved to Schedule status as soon as the END date has reached and then second one might have gone when you have removed the chain from Schduling..
Anyway check the same.. and also check in SM37 whether any other user has triggered it manually today or not?

Behaviour of "Disable/Delete User After End Date" Task

Hi Expert,
We ran the given OOTB task "Disable/Delete User After End Date" and the behavior is always delete. How,if possible, to change the behavior to disable?
Thanks in advance.
SK

In order to change the behavior, you have to set the system manager preference called "Period to Delay User Delete" to something bigger than the task will make the user disabled and will automatically delete them at a future date.

LPX-00245: extra data after end of document

Hi,
Oracle Version is 11.1.0.7.0
While simulating higher load on my application I am facing the following error.This error is continuously appearing on Unix Application server.Kindly let me know why this error is coming and how can i resolve it.
In line 673 of buffer:
LPX-00245: extra data after end of document
Thanks

Hi;
Similar error mention in below doc, please check them:
Dbms_spm.Load_plans_from_sqlset Getting Xml Parsing Error [ID 1204524.1]
Issues When Trying to Load XML Message From Jms Queue To Oracle Table As Xmltype [ID 1139775.1]
Bug 9942454 - DBMS_SPM.LOAD_PLANS_FROM_SQLSET gets XML parsing error [ID 9942454.8]
Regard
Helios

A SWF Tag of type 75 contains 10 bytes of unread data at the end of the tag at byte offset 1762

When building with Flash builder 4.7 I get two warnings I can't seem to track down.
Those are
"A SWF Tag of type 75 contains 10 bytes of unread data at the end of the tag at byte offset 1762" The other
"A SWF Tag of type 75 contains 5464 bytes of unread data at the end of the tag at byte offset 797163"
No file is pointed out or anything else to help.
Any ideas what to look for, why this is a warning, possible implications & what to do?

This is one output after running a variation of the script, but I get this    on all of the libraries
Here is a link to the swc for further inspection https://dl.dropbox.com/u/154782/GoCoUtil.swc
<?xml version="1.0" encoding="UTF-8"?>

<swf xmlns="http://macromedia/2003/swfx" version="14" framerate="24.0" size="10000x7500" compressed="true" >

<FileAttributes useDirectBlit="false" useGPU="false" hasMetadata="true" actionScript3="true" suppressCrossDomainCaching="false" swfRelativeUrls="false" useNetwork="true"/>
<Metadata>
        <![CDATA[<rdf:RDF xmlns:rdf='http://www.w3.org/1999/02/22-rdf-syntax-ns#'><rdf:Description rdf:about='' xmlns:dc='http://purl.org/dc/elements/1.1'><dc:format>application/x-shockwave-flash</dc:format><dc:title>Adobe Flex 4 Application</dc:title><dc:description>http://www.adobe.com/products/flex</dc:description><dc:publisher>unknown</dc:publisher><dc:creator>unknown</dc:creator><dc:l anguage>EN</dc:language><dc:date>Sep 20, 2012</dc:date></rdf:Description></rdf:RDF>
]]>
</Metadata>
<EnableDebugger2 password="NO-PASSWORD" reserved="0x1975"/>

<ScriptLimits scriptRecursionLimit="1000" scriptTimeLimit="60"/>
<SetBackgroundColor color="#FFFFFF"/>
<ProductInfo product="FLEX" edition="NONE" version="4.6" build="23201" compileDate="9/20/12 12:41 PM"/>
<DoABC name="com/gogogic/common/util/interfaces/IParsableList"/>
<DoABC name="_5655ee2c6f5749799717c751ad05c55879a42026a02d38e5e206aab452dbcc6f_flash_display_Spr ite"/>
<DoABC name="com/gogogic/common/util/ShallowCloner"/>
<DoABC name="com/gogogic/common/util/GoCoDataUtil"/>
<DoABC name="com/gogogic/common/util/PropertyParseError"/>
<DoABC name="com/gogogic/common/util/interfaces/IDataChange"/>
<DoABC name="com/gogogic/common/util/vo/DataChangeVO"/>
<DoABC name="com/gogogic/common/util/GoCoUtilVersion"/>
<DoABC name="com/gogogic/common/util/event/DataChangeEvent"/>
<DoABC name="com/gogogic/common/util/PropertyParser"/>
<SymbolClass>
    <Symbol idref="0" className="_5655ee2c6f5749799717c751ad05c55879a42026a02d38e5e206aab452dbcc6f_flash_displa y_Sprite" />
</SymbolClass>
<ShowFrame/>
</swf>

F4 Help on Date Field after ALV is generated

Hi all,
Now this might sound very simple question, but Im having some difficulty in this.
My idea is to have an F4 on a date field after the ALV Grid report is executed. From the forum search, Ive got such answers as
l_fieldcat-edit         = 'X'.
l_fieldcat-F4AVAILABL = 'X'.
Now the problem with this is that Im getting an error saying:
The data object "l_fieldcat does not have a component called "F4AVAILABL".
And then I tried this:
l_fieldcat-fieldname    = 'DDATE'.
l_fieldcat-ref_tabname = 'ZCST001'.
Now at the report output when I press F4 on the date field it gives me a dump saying:
Field symbol has not yet been assigned.
Error in the ABAP Application Program
The current ABAP program "CL_GUI_ALV_GRID===============CP" had to be terminated because it has come across a statement that unfortunately cannot be executed.
So Im kinda stuck now. Appreciate your suggestions.
PS: Im on ECC6.
PPS:The intended F4 on field is a custom field in a custom table.
pk

Run This:
report ztest.
TYPE-POOLS : slis.
tables:mara,makt.
data: begin of it_final occurs 0,
matnr like mara-matnr,
ERSDA like mara-ERSDA,
end of it_final.
DATA: it_fieldcat     TYPE slis_t_fieldcat_alv,
      wa_fieldcat     TYPE slis_fieldcat_alv,
      wa_layout       TYPE slis_layout_alv,
      g_repid         TYPE sy-repid.
START-OF-SELECTION.
select matnr ERSDA into table it_final from mara up to 10 rows.
g_repid = sy-repid.
PERFORM f_populate_fieldcat.
* PERFORM fill_zpayroll.
PERFORM f_call_alv.
*&      Form f_populate_fieldcat
*       text
* --> p1        text
* <-- p2        text
form f_populate_fieldcat .
"Mat Number
CLEAR wa_fieldcat.
wa_fieldcat-tabname     = it_final.
wa_fieldcat-fieldname   = 'MATNR'.
wa_fieldcat-seltext_l   = 'MAT No.'.
wa_fieldcat-outputlen   = 15.
APPEND wa_fieldcat TO it_fieldcat.
"Creation date
CLEAR wa_fieldcat.
wa_fieldcat-tabname     = it_final.
wa_fieldcat-fieldname   = 'ERSDA'.
wa_fieldcat-edit         = 'X'.
wa_fieldcat-REF_TABname = 'MARA'.
wa_fieldcat-REF_FIELDname = 'ERSDA'.
wa_fieldcat-seltext_l   = 'Creation date '.
wa_fieldcat-outputlen   = 15.
APPEND wa_fieldcat TO it_fieldcat.
endform.                    " f_populate_fieldcat
*&      Form f_call_alv
*       text
* --> p1        text
* <-- p2        text
form f_call_alv .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program     = g_repid
      i_callback_top_of_page = 'TOP-OF-PAGE'
      is_layout              = wa_layout
      it_fieldcat            = it_fieldcat[]
      I_SAVE = 'A'
    TABLES
      t_outtab               = it_final
    EXCEPTIONS
      program_error          = 1
      OTHERS                 = 2.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
endform.                    " f_call_alv
In custom table date field must be referenced to DATS.
P.S.I hope you already solved
Cheers

Oracle: Expanded non LONG bind data supplied after actual LONG or LOB colum

I am getting this error message when I try to insert clob into oracle table.
ORA-24816: Expanded non LONG bind data supplied after actual LONG or LOB column. This error message is kind of misleading. For this error message, I should reorder the list of columns which means that the column with LONG RAW should come at end. So I reordered the list to make the LONG RAW column come at end. But I was still getting this error message. So I found out that data that needs to be inserted into the clob is causing this error.
Here is my code for inserting clob.
                    byte[] bytes1 = .....
                    statement.setAsciiStream(index, new ByteArrayInputStream(bytes1), bytes1.length);I don't know what is wrong with this code. I have been using this for a while and now it is throwing an exception.
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:743)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:213)
     at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:952)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1160)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3285)
     at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3390)
I am using JDK5 and Oracle 10g driver.
Please help me.

I have these columns,
ROW_DESC - Char
Table_id - Char
Blob_desc - Char
Blob1 - Blob
LOB_DATE - Date
CLOB1_DESC - Char
CLOB1 - Clob
CHAR_25_Col - Char
VBIN_400_Col - Long Raw.
But what I noticed is that the one causing the problem is not actually Long Raw column. "CLOB1" is the one causing a problem. The database is configured as unicode (AL32UTF8). When I tested it against another database with non-unicode, it works fine with same table description. So somehow it is unable to bind unicode large clob data.
I ran into this problem while I was inserting data from the source table to the target table.
Here is how I read from the resultset.
                    InputStream inputStream = resultSet.getAsciiStream(index + 1);
                    if (inputStream == null) {
                        return null;
                    ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
                    byte[] buffer = new byte[1024];
                    int length;
                    do {
                        length = inputStream.read(buffer);
                        if (length > 0) {
                            outputStream.write(buffer, 0, length);
                    } while (length > 0);
                    byte[] resultBytes = outputStream.toByteArray();Here is how I bind parameters.
                    statement.setAsciiStream(index, new ByteArrayInputStream(resultBytes), resultBytes.length);If i use "((OraclePreparedStatement) statement).setStringForClob", then it works, but it will impact the performance, because I need to convert the clob to string.
is there any way to do it without converting to string object?
Thanks.

Can the case be changed while uploading the data or after uploading ????

hi all ,
can u pls help me ??? can the case of the data in a itab be changed while running the program? the data is uploaded to an internal table and then based on loop at that itab the conditions will evaluate to give the result.... but the problem is like wen the data is given in small letters the worste(last) condition is executing even the data satisfies the condtion which is not supposed to happen. this is due to case sensitive problem ...can u pls help me ....can the case be changed while uploading the data r after uploading ????

this is the itab declaration ..
data: begin of it_input occurs 0 ,
       tra          like tstc-tcode,
     end of it_input.
and then from the uploaded data the prog should check wheather it is having any userexits or not ...
here comes the code...
sort it_input by tra.
delete adjacent duplicates from it_input .
loop at it_input.
           it_itab-sno = sy-tabix.
select single * from tstc where tcode eq it_input-tra.
if sy-subrc eq 0.
    select single devclass from tadir into v_devclass
             where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
         if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
         move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
       if sy-subrc = 0.
        select single * from tstct where sprsl eq sy-langu and
                                        tcode eq it_input-tra.
                  if not jtab[] is initial.
           loop at jtab.
                select single modtext from modsapt into str
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                it_itab-tra        = it_input-tra.
                it_itab-i_obj_name = jtab-obj_name.
                it_itab-i_modtext = str.
                append it_itab.
                str = ''.
           endloop.
          endif.
        else.
                it_itab-tra        = it_input-tra .
                it_itab-i_obj_name = ' '.
                it_itab-i_modtext = 'No user Exit exists'.
                 append it_itab.
        endif.
      else.
                it_itab-tra        = it_input-tra .
                it_itab-i_obj_name = ' '.
                it_itab-i_modtext = 'Transaction Code Does Not Exist'.
                 append it_itab.
      endif.
endloop.

Suppress the enter-query mode when no-data-found after execute a query.

HI,
Greetings of the day, Can any one suggest me that how to Suppress the enter-query mode when no-data-found after execute a query on the form by a button.
whenever i execute query on form and result is no data found then form :system.mode is still in enter-query mode.
i want that if result is no data found then form comes back it initial state.
i will thank full of him who will help me..
Thanks in Advance..

Put this in your Key-ExeQry trigger:Execute_Query;
If Get_block_property(:System.current_block,query_hits)=0 then
Exit_form; --this cancels the Enter-Query mode; Does not exit the form.
End if;You may want to trap and prevent the "FRM-40353: Query cancelled" message, and change the "FRM-40301: Query caused no records to be retrieved. Re-Enter" message. To do that, you need an On-Message form-level trigger:Declare
Msg_Code Number        := MESSAGE_CODE;
MSG      Varchar2(150) := SUBSTR('   '||MESSAGE_TYPE||'-'
                         ||TO_CHAR(Msg_Code)||': '||MESSAGE_TEXT,1,150);
BEGIN
If Msg_Code=40301 then
     -- 40301: Query caused no records to be retrieved. Re-Enter
    Message(' NO RECORDS FOUND',No_acknowledge);
Elsif Msg_Code=40353 then -- Query cancelled.
    null;
Else
    MESSAGE(MSG,NO_ACKNOWLEDGE);
End if;
End;

Filter Idoc segment based on date in XSLT map

Hi,
In a Idoc to flat file XSLT mapping, I have a requirment to filter segment out of multiple segment occurance in HRMD_A idoc. Idoc has two date fields(actually string data, containing date in YYYYMMDD format) in the segment(end date and start date). I need to filter only one segment from multiple segments where current date falles within start and end dates (end date >= current date >= start date). Then map output fields from the filtered segment.
Its easy doing it in graphical mapping, but its difficult to use graphical mapping here as the message structure are enormous. I dont have much hands on in XSLT but think many of you have been through this kind of requirement using XSLT. So holding my hope high :). Please suggest a logic for this, will be highly appretiated.
Regards
Suman.

This functions will give you the current date:
fn:current-dateTime()     => Returns the current dateTime (with timezone)
fn:current-date()                 => Returns the current date (with timezone)
fn:current-time()                 => Returns the current time (with timezone)
To compare:
fn:compare(comp1,comp2)
fn:compare(comp1,comp2,collation)
=> Returns -1 if comp1 is less than comp2, 0 if comp1 is equal to comp2, or 1 if comp1 is greater than comp2 (according to the rules of the collation that is used)
Example: compare('ghi', 'ghi')
Result: 0
Also I suggest working with an IF condition like this:
<xsl:if test="price > 10">
        <tr>
          <td><xsl:value-of select="title"/></td>
          <td><xsl:value-of select="artist"/></td>
        </tr>
      </xsl:if>
Edited by: Kai Lerch-Baier on Apr 14, 2009 10:21 AM

Segment: 3.314 date comes after end of valid factory calend

Similar Messages

Maybe you are looking for