Segment Builder - run time error

Hi All,
I am working in sgment buillder in CRM 6.0, I created TG and when i try to open it in GUI it throws run time error "CREATE_DATA_UNKNOWN _TYPE " . i understood this is ABAP runtnime error.
Kindly give your valuable suggestions.
Warm regards,
Sathish Prabhu.R

Hello,
Check The reason for the dump could be because of the custom badi implementation. check your badi implementation for CRM_MKTTG_SEG_MEM_EX.
It has two methodds
IF_EX_CRM_MKTTG_SEG_MEMBER_EX~GET_TG_MEMBER_STRUCTURE and
IF_EX_CRM_MKTTG_SEG_MEMBER_EX~GET_TG_MEMBER_STRUCTURE_REL
For these methods, check whether you are passing the structures.
Thanks
Raja Pamireddy
CRM Marketing Forum Moderator.

Similar Messages

Template builder - run time error '429'

Hi all,
I'm getting a Visual Basic "run-time error '429' ActiveX component can't create object" in two separate environments. One is using Word 2007 the other Word 2003. The error occurs when I try to log into PI Publisher from Word. I can't find any info on this error. They are both 64 bit machines and I have the .NET 2.0 for 64 bit installed. Has anyone seen this?
Thanks!
Patrick

Correct, you do not need Oracle client software installed. But, where does Desktop get installed? Under C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop. One of the folders therein is DotNetInstallFiles. Then, consider this:
"With OLE DB .NET, applications can access the Oracle database from any .NET programming language.
The provider now supports 64-bit Windows natively, including Windows x64 and Windows Itanium."
I would venture to say that older versions of Desktop were probably not tested on 64-bit PCs because who uses Office on 64-bit Windows? Even in the certification guide, it states that all possible combinations of J2EE compliant engines, databases, OS, etc have not been tested. Digging into the BI installed files, you see ADO-related files.

Application builder-run time error

I cannot run my exe file I have always the following message , see attachment.
What can be the problem?
Attachments:
run-time engine error.jpg ‏42 KB

Is the run-time engine installed? A LV EXE can not run without the RTE.
When you build an EXE, you have the option to create an installer, which will also install the RTE. If you build an EXE with no VI defined, it should build an installer with only the RTE.
Alternatively, you can try looking for the RTE installer on your LV CD or on this site.
Try to take over the world!

Run-Time errors using DAQmx and Borland C++ Builder 5.0

I've written a simple program on MS Visual C++ 6.0 to test my PCI-6014 board and it works fine.
I copied the code to Borland C++ builder 5.0 and had some linker problems with the .lib files that where solved with borland's "coff2omf".
Now I've been getting run-time errors when I use the function DAQmxCreateAIVoltageChan()... The error code is -50251: "The specified software component is not available. The component was not loaded".
But I'm sure that the code is right, since it works fine on MS Visual C++ 6.0!
That the part of the code where I'm getting the error:
iErro = DAQmxCreateTask("", &thTask);
iErro = DAQmxCreateAIVoltageChan(thTask, "Dev1/ai0", "", DAQmx_Val_Diff, -10.0, 10.0, DAQmx_Val_Volts, NU
LL);
Thanks for the help,
Marcelo

Hello
Borland enables certain types of exceptions by default which are initially disable in MSVC. You will need to refer to the documentation for Borland Builder on how to disable floating point exceptions. I believe you can do it by adding the following statement to your initialization code, but you should double check this:
_control87(MCW_EM, MCW_EM);
These exceptions get thrown because we are doing some floating point initialization underneath. This is not an indication of a bug or a problem of any sort. Apparently you have to this for alot of libraries to work correctly with Borland (OpenGL etc...)
Hope this helps
Bilal Durrani
NI
Bilal Durrani
NI

Run time error running Vision Builder AI inspection from TestStand

Hello,
I have TestStand 3.1 and Vision Builder for AI v2.6.1.
I would like to run from TestStand a Vision Builder Program or steps. For to achieve that, I have followed the instructions on Application Note 215, Running a Vision Builder AI Inspection from TestStand.
After installation, the option in TestStand InsertStep>NI Vision Builder AI>Inspection works properly.
But when try to execute a step with that inspection, and whatever operation of that one, the result is the following error:
Run-Time Error
Details: Error executing substep 'Post'.
An error occurred calling 'ExecuteStep' in '_NIVBAITestStandSteps' of 'NIVBAITestStandAPI'.
Error Code: -2147417851; User defined code. Possible System Error: The server sent an exception.
At this point really I don´t know what to do, and I don't find any extra help apart of application note.
I will appreciate some suggestion.
Gonzalo.

Hello,
I've found some more information that may help. Since these TestStand steps are simply call a DLL with an exported ActiveX API, path issues may exist. In fact, the overwhelming number of times this error appears, paths seems to be the case. I am not sure why the error is an indication of a path issue, but that seems to be the case. I would recommend that you would reregister the DLL, this time in the same directory as the example sequence. To do this:
- Unregister the current DLL by going to Start Menu>>Run, and typing: regsvr32 /u NIVBAITestStandAPI.dll
- Move the DLL from the system32 folder to the folder in which the example sequence is saved.
- Reregister the DLL from the run command (regsvr32 <folder path>\NIVBAITestStandAPI.dll)
- Restart TestStand if it is open
I apologize for not having any concrete answers, but this one is proving tough without me being able to replicate the issue.
crisR

Template Builder not found followed by Run-time error '429'

Hello,
I am having problems with BI Publisher.
I am running the application on a Windows 2003 server via a Citrix connection using Word 2007 (SP2) (multilingual French/English). On this forum, I have seen numerous threads about this type of error but none seems to be working for us.
Symptoms:
I installed BI Publisher with admin rights (account A) and it works fine using this account
I copy the TBCrosstab.dot, TemplateBuilder.dot, WordAnalyzer.dot in another User Profile "%USERPROFILE%\Application Data\Microsoft\Word\STARTUP" (Account B)
All macros are enabled in account B
The Add-ins menu shows but when I click on Connection I get the Template Builder not found error followed by Run-time error '429'
I uninstall BI Publisher from Account A and install it using account B
It now works fine with account B but I get the error messages in account A...
Does BI Publisher work using multiple accounts on a single machine?
Thanks

Did you find a solution to this problem?

Run time error when trying to complete a build

Hi,
I'm running a copy of CS5 Master Collection on a Windows 7 64 bit PC and using Encore to build an interactive DVD. I have been using the program for about a year and had no problems however this week I have been unable to complete a build.
When I set the program to run a build, it spends a long time (over an hour) building motion menus, then moves on to 'Transcoding' and at some point in this process I will get a "C++ Run Time" error message and I am forced to shut down the program and start again.
I have tried building both a DVD Disk and a DVD image but both have the same result. I have also set the assets files to 'Dont transcode' in the project bin however this does not make any difference.
Can anyone suggest anything else I could do?
Thanks
Chris

Hi,
Many thanks for the advice. I wanted to give you a bit more information.
I have just attempted another build using 'Run as Administrator' ( to rule it out) however it has come up with the same message at the same point.
The message is as follows:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program:C:\...
This application has requested the Runtime to terminate it in an unusual way
Please contact the application's support team for more information.
To answer your questions: I am not using Dynamic Link or Premiere Pro for this project. The video files I have imported were created in either 3D Max or Aftereffects. These files were rendered as lossless AVI's and then we used Sorensen Squeeze to convert them all into DVD native MPEG2 files. The audio files we are using were converted to DVD native audio files (MPEG2 audio) in Aftereffects.
We did this in an effort to ensure a high standard of quality.
Regarding the kind of files - we are giving encore the MPEG2 video files, MPEG2 audio files and PSD menus.
One other thing to mention - the error comes up at the same point each time I try a build. The progress screen on encore says 'Transcoding' however we have set all of the files to 'Don't Transcode' - this seemed strange to me however I could be wrong.
We do have some long file names in the project so I may have to amend these however I wanted to see if you could suggest anything else first.
Thanks again,
Chris

Xml Publisher run time error '5148'

Dear
I am using XML publisher to convert data in excel from the oracle,so first i have generated data in xml by report builder and open xml file in Word document through >template builder >data > load xml data,it's find but i use insert menu and select all field then it give message which i have mentioned below,
run time error '5148'
The number must be between 1 to 63
I think, is it column limitation because i have done this activity later but right now i have added more column so may be that's why it is showing the error but my client need to show data in excel,so how i can fulfill this requirement,is there any other solution ?
Please help on this regard. thanks in advance.

Just for future poor souls who may be pulling their hair out over the same issue, I eventually got to the bottom of this cryptic error message.
Do not try to import all your fields at once if your group has over 63 of them, as it will fail.
If you use the Insert Table option, and try to put all the fields in at once, it will give you a more meaningful message, and the one it SHOULD have given you in the first place, which is "A table cannot contain more than 63 columns".
So - Import them, a few at a time. Then move them all into one group and you're good to go.

Run time error while closing the CRM Order using BAPI

Hi Experts,
Need your invaluable suggestions here.Apologies for the lengthy mail, intention is to give clear idea of the issue.
I am facing an issue while closing the CRM orders. According to our business process, when an issue is solved we will keep the order in resolved status only. We will not directly close the order from the CRM tool, instead we have created a custom program for the same purpose.
For the custom program we will give input as the order number and execute it, this will close the order.
Here close the order means assigning it to Close status as well assign the reason code.
We have created some reason codes for closed status.
So when the program is run the Order moves from resolved status to closed status along with reason code.
But of late we are facing some problems with this program, it is giving run time error for some CRM orders.
Run time error message : The ABAP/4 Open SQL array insert results in duplicate database records.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught in procedure "CRM_SERVICE_OS_UPD_OST_DU" "(FUNCTION)", nor was it propagated by a RAISING clause.
Please find my code which have used in the custom program
Closing the resolved SOs in the system
    CALL FUNCTION 'CRM_STATUS_CHANGE_EXTERN_OW'
        EXPORTING
          objnr                     = iv_guid
          user_status          = lc_status_closed
       EXCEPTIONS
         object_not_found          = 1
         status_inconsistent       = 2
         status_not_allowed       = 3
         OTHERS                        = 4.
    IF sy-subrc <> 0.
      WRITE : 'Error at maintaining status'.
    ENDIF.
Set reason code
build lt_subject
    ls_subject-ref_guid = iv_guid.
    ls_subject-katalogart = 'A2'.
    ls_subject-codegruppe = 'ZR000003'.
    ls_subject-code       = 'ZR33'.                      " Reason code
    ls_subject-mode       = 'A'.
    APPEND ls_subject TO lt_subject.
build lt_ossset
    ls_osset-ref_guid        = iv_guid.
    ls_osset-subject_profile = 'ZREASON03'.
    ls_osset-profile_type    = 'G'.
    ls_osset-subject         = lt_subject.
    APPEND ls_osset TO lt_osset.
build lt_service_os
    ls_service_os-ref_guid = iv_guid.
    ls_service_os-ref_kind = 'A'.
    ls_service_os-osset     = lt_osset.
    APPEND ls_service_os TO lt_service_os.
build lt_input_fields
    REFRESH: lt_input_fields, lt_field_names.
    CLEAR : ls_input_fields, ls_field_names.
    ls_field_names-fieldname    = 'CODE'.
    APPEND ls_field_names TO lt_field_names.
    ls_field_names-fieldname    = 'CODEGRUPPE'.
    APPEND ls_field_names TO lt_field_names.
    ls_field_names-fieldname    = 'KATALOGART'.
    APPEND ls_field_names TO lt_field_names.
    ls_field_names-fieldname    = 'SERVICE_PROFILE'.
    APPEND ls_field_names TO lt_field_names.
    ls_input_fields-ref_guid    = iv_guid.
    ls_input_fields-ref_kind    = 'A'.
    ls_input_fields-objectname = 'SERVICE_OS'.
    ls_input_fields-field_names = lt_field_names.
    APPEND ls_input_fields TO lt_input_fields.
     CALL FUNCTION 'CRM_ORDER_MAINTAIN'
      EXPORTING
        it_service_os     = lt_service_os
      CHANGING
        ct_input_fields   = lt_input_fields
      EXCEPTIONS
        error_occurred    = 1
        document_locked   = 2
        no_change_allowed = 3
        no_authority      = 4
        OTHERS            = 5.
    IF sy-subrc <> 0.
      WRITE : 'Error at maintaining reason'.
    ENDIF.
    CALL FUNCTION 'CRM_ORDER_SAVE'
      EXPORTING
        it_objects_to_save   = lt_header_guid
        iv_update_task_local = lv_update_task_local
      IMPORTING
        et_saved_objects     = lt_saved_objects
      EXCEPTIONS
        document_not_saved   = 1
        OTHERS               = 2.
    IF sy-subrc <> 0.
      WRITE : 'Error at saving'.
    ELSE.
      WRITE : 'Successfully Closed'.
      COMMIT WORK AND WAIT.
    ENDIF.
Run time error is coming at COMMIT WORK AND WAIT statement.
Please let me know any corrections are required in the above program.
When I analyzed the run time error I have found that it trying to insert the record in CRMD_SRV_OSSET for that CRM order, but already one record is present in the table for the same CRM order number.
For most of the CRM orders there is no entry in this table so they are closing successfully but for a few orders for which there is an entry we are getting the above run time error.
There is nothing wrong with the orders which have an entry already in the table CRMD_SRV_OSSET, I need to close these kind of orders with out run time error.
Kindly provide your feedback.

Hi Dinakar,
You posted this in APO PPDS forum. This question should go to PP forum where someone could answer it.
Please close this thread and open a new thread in PP forum so that you could get help quickly from the relevant experts.
Regards - Pawan

Asset master creation (run time error)

Dear all
I am facing problem with asset accounting at that time creation of asset master getting to run time error message
Error message: GETWA_NOT_ASSIGNED
Fields symbol not yet been assigned(segment 32770)
Thanks & Regards
suresh
Edited by: prasad y on Jul 5, 2011 3:23 PM

Dear:
              Please check notes, they have to be implemented in the system
               992846
               988238
               Regards

Package failed with run time error: " GETWA_NOT_ASSIGNED".

Hi,
One of our custom package is failing with run time error " GETWA_NOT_ASSIGNED". We are getting this error after refresh. Infact this package is working fine both in production and Dev, but in QA system it giving runtime error.
Here with I am pasting run time error details. Please see...If any one have any idea or clue or if you have faced this kind of error.
Thanks is advance.
Error Details.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_UJK_CUSTOM_LOGIC===========CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32774).
    This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
Regards, Trine

Hi Trine,
the error is about some field you are trying to map using field-simbols, that is diferent in the other system.
Go to the code program in the st22, there you will see when the erros occurs e what field gives the error.
Best Regards,
António

KE30 Report:-Takes very long time and ends in a Run time error

Hi Expert,
Since last three week (after up gradation of system) we are not able to run any of KE30 reports in Production system and its end with Run Time Error. Even in development system where data is minimum it is taking 45 Minutes to give output where it should take maximum 4-5 Minute. Before up gradation it was working fine
What could be the reason for this and how can i resolve this.
Thanks in Advance
Bipin Tiwari

HI Sridhara
Thanks for quick response. After Up Gradation we ran SGEN T-code but no impact on system performance. There after we build new summarisation level in KEDVP (system proposed) and activated it but still it is taking 30-.35 minute to generate the report in Development system which should normaly take 1-2 Munite.
Can you suggest what else we can do or is there any better way for build summarisation level in given scenario.
Best Regards
Bipin Tiwari

Run-time error "CONVERSION_CODEPAGE_UNKNOWN" occurred in BW SapNetweaver.

Today I have problem with this error dump: Run-time error "CONVERSION_CODEPAGE_UNKNOWN"
I got this problem from rspc chain manager but also from another place as place a filter on table VARI.
I suspect that this include "IMPORT_VARIANT_STATIC" got problem of the (Include)
program "RSDBSPVD".
This is first time that I got this error.
I think problem was linked to VARI tables and include IMPORT_VARIANT_STATIC in this program RSDBSPVD
Runtime Errors         CONVERSION_CODEPAGE_UNKNOWN
Date and Time          03.06.2008 14:27:46
|Short text
|    Unable to convert from code page ' ' to code page '4103'.      |What happened?
Error in the ABAP Application Program
The current ABAP program "RSDBSPVD" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
One of your chosen conversion tables (CODE PAGE) ' ' or '4103'
is unknown to the system.
For a list of conversion tables known to the system, see table
|    TCP00. To display this, use Transaction SPAD.
Active Calls/Events
No.   Ty.          Program                             Include                             Line
Name
4 FORM         RSDBSPVD                            RSDBSPVD                              119
IMPORT_VARIANT_STATIC
3 FORM         SAPLSVAR                            LSVARF07                              522
IMPORT_VAR_SELC
2 FUNCTION     SAPLSVAR                            LSVARU07                               80
RS_VARIANT_CONTENTS
1 EVENT        RS_VARIANT_VALUES                   RS_VARIANT_VALUES                      22
|      START-OF-SELECTION

Sorry, but my Sap Netweaver 2004s is a build 700.
I'm manually imported this table, before I exported table VARI from an old database of this istance. (db2 dart /ddel 'table space number' 'table id number')
log about vari import table:
SQL3501W The table space(s) in which the table resides will not be placed in
backup pending state since forward recovery is disabled for the database.
SQL3109N The utility is beginning to load data from file
"D:db2BW2db2dumpDART000025".
SQL3500W The utility is beginning the "LOAD" phase at time "05/29/2008
18:56:04.266758".
SQL3519W Begin Load Consistency Point. Input record count = "0".
SQL3520W Load Consistency Point was successful.
SQL3114W Some data following """" in row "F0-1242" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1243" and column "10" was not
loaded.
SQL3227W Record token "F0-1242" refers to user record number "6536".
SQL3227W Record token "F0-1243" refers to user record number "6537".
SQL3114W Some data following """" in row "F0-1958" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1959" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F0-1959" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F0-1969" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1974" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1634" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1981" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1982" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1983" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1995" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1996" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1998" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2009" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2010" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-2010" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-2012" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2023" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2026" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2037" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2040" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2051" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2052" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-2052" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-2054" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2065" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2066" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2068" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2079" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2082" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2240" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2243" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2253" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2254" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2255" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2266" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2267" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2269" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2280" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2281" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2282" and column "10" was not
loaded.
SQL3227W Record token "F0-1958" refers to user record number "11636".
SQL3227W Record token "F0-1959" refers to user record number "11637".
SQL3227W Record token "F0-1969" refers to user record number "11647".
SQL3227W Record token "F0-1974" refers to user record number "11652".
SQL3227W Record token "F1-1634" refers to user record number "11661".
SQL3227W Record token "F0-2240" refers to user record number "14014".
SQL3227W Record token "F0-2243" refers to user record number "14017".
SQL3227W Record token "F0-2253" refers to user record number "14027".
SQL3227W Record token "F0-2254" refers to user record number "14028".
SQL3227W Record token "F0-2255" refers to user record number "14029".
SQL3227W Record token "F0-2266" refers to user record number "14040".
SQL3227W Record token "F0-2267" refers to user record number "14041".
SQL3227W Record token "F0-2269" refers to user record number "14043".
SQL3227W Record token "F0-2280" refers to user record number "14054".
SQL3227W Record token "F0-2281" refers to user record number "14055".
SQL3227W Record token "F0-2282" refers to user record number "14056".
SQL3227W Record token "F1-1981" refers to user record number "14068".
SQL3227W Record token "F1-1982" refers to user record number "14069".
SQL3227W Record token "F1-1983" refers to user record number "14070".
SQL3227W Record token "F1-1995" refers to user record number "14082".
SQL3227W Record token "F1-1996" refers to user record number "14083".
SQL3227W Record token "F1-1998" refers to user record number "14085".
SQL3227W Record token "F1-2009" refers to user record number "14096".
SQL3227W Record token "F1-2010" refers to user record number "14097".
SQL3227W Record token "F1-2012" refers to user record number "14099".
SQL3227W Record token "F1-2023" refers to user record number "14110".
SQL3227W Record token "F1-2026" refers to user record number "14113".
SQL3227W Record token "F1-2037" refers to user record number "14124".
SQL3227W Record token "F1-2040" refers to user record number "14127".
SQL3227W Record token "F1-2051" refers to user record number "14138".
SQL3227W Record token "F1-2052" refers to user record number "14139".
SQL3227W Record token "F1-2054" refers to user record number "14141".
SQL3227W Record token "F1-2065" refers to user record number "14152".
SQL3227W Record token "F1-2066" refers to user record number "14153".
SQL3227W Record token "F1-2068" refers to user record number "14155".
SQL3227W Record token "F1-2079" refers to user record number "14166".
SQL3227W Record token "F1-2082" refers to user record number "14169".
SQL3114W Some data following """" in row "F1-9602" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-9603" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-9603" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-9612" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9374" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9375" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9383" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9397" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9410" and column "10" was not
loaded.
SQL3227W Record token "F1-9602" refers to user record number "66049".
SQL3227W Record token "F1-9603" refers to user record number "66050".
SQL3227W Record token "F1-9612" refers to user record number "66059".
SQL3227W Record token "F2-9374" refers to user record number "66063".
SQL3227W Record token "F2-9375" refers to user record number "66064".
SQL3227W Record token "F2-9383" refers to user record number "66072".
SQL3227W Record token "F2-9397" refers to user record number "66086".
SQL3227W Record token "F2-9410" refers to user record number "66099".
SQL3114W Some data following """" in row "F2-11966" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-11969" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-12580" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-12581" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12270" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12273" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12274" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12283" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12286" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12287" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12295" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12299" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12300" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12308" and column "10" was not
loaded.
SQL3227W Record token "F2-11966" refers to user record number "83492".
SQL3227W Record token "F2-11969" refers to user record number "83495".
SQL3227W Record token "F2-12580" refers to user record number "86221".
SQL3227W Record token "F2-12581" refers to user record number "86222".
SQL3227W Record token "F3-12270" refers to user record number "86232".
SQL3227W Record token "F3-12273" refers to user record number "86235".
SQL3227W Record token "F3-12274" refers to user record number "86236".
SQL3227W Record token "F3-12283" refers to user record number "86245".
SQL3227W Record token "F3-12286" refers to user record number "86248".
SQL3227W Record token "F3-12287" refers to user record number "86249".
SQL3227W Record token "F3-12295" refers to user record number "86257".
SQL3227W Record token "F3-12299" refers to user record number "86261".
SQL3227W Record token "F3-12300" refers to user record number "86262".
SQL3227W Record token "F3-12308" refers to user record number "86270".
SQL3110N The utility has completed processing. "1053698" rows were read from
the input file.
SQL3519W Begin Load Consistency Point. Input record count = "1053698".
SQL3520W Load Consistency Point was successful.
SQL3515W The utility has finished the "LOAD" phase at time "05/29/2008
18:56:18.932604".
SQL3500W The utility is beginning the "BUILD" phase at time "05/29/2008
18:56:18.936928".
SQL3213I The indexing mode is "REBUILD".
SQL3515W The utility has finished the "BUILD" phase at time "05/29/2008
18:56:24.684630".
SQL3107W There is at least one warning message in the message file.
Number of rows read         = 1053698
Number of rows skipped      = 0
Number of rows loaded       = 1053698
Number of rows rejected     = 0
Number of rows deleted      = 0
Number of rows committed    = 1053698
Do you think that convert codepage errore is due to this warning message?

BIP Desktop Install Problem: Run-time error '9' Subscript out of range

Hi All,
I am trying to get my BIP Desktop to work. I have notice previous threads regarding the internet explorer security patches affecting BIP Desktop and my problem is similar. Here is my problem:
1. I installed BIP Desktop 5.7.146.
2. I start Template Builder for Word Language by selecting Start>Programs>Oracle BI Publisher Desktop.
3. A dialog box prompts for UI Language and I select English
In the midst of the Template Builder for Word Language attempting to initiate/change the user interface language to English, it throws the following error:
Run-time error '9' Subscript out of range
Here are some details regarding my PC:
XP sp2, MSXML6, jre1.5.0_15
Also, my CPU performance hits it maximum while I am doing this
Any thoughts on how to correct this?
Thanks,
Patrick

Patrick,
Were you able to find a solution to this problem?
One of my colleagues is having the same issue.
Regards,
Srini

Run-time error 53 File not found (makes BI Publisher quite unuseable!)

Upgraded to BIP v 10.1.3.3.2
Open a template with the template builder
Load a source XML file
Proceed to choose Insert-> Field....
Microsoft message pops up:
Microsoft Visual Basic
Run-time error '53':
File Not Found.
This error, according to Microsoft and other technical sources SHOULD actually tell you what the file is that isn't found, however when run through the template builder, it never tells you any file name, just the above error message!
I saw one other post on this forum about this problem, and it was related to the Java Home, so I went to TOOLS-> OPTIONS and my java home there is:
C:\Program Files\Java\jre1.5.0_12
So this should be high enough JRE version.
ANy suggestions? What file or *.DLL can it not find? We have many people at a client (and me!) that have this issue.
-Greg

Pradeep,
I am not trying to utilize the desktop template builder to log onto BIP enterprise.
I am using it in an E-business suite environment, not a standalone BIP enterprise reporting environment. I simply use it right now to develop templates when I have valid XML to work with.
Many other features are working, but any features that seem to be new such as repeating group, conditional region, conditional format, the insert field palet, among others.
ANY feature that requires a .net service to be kicked off works only 10% of the time.

Segment Builder - run time error

Similar Messages

Maybe you are looking for