Segment creation problem

I have a File to IDoc scenario. The IDoc imported has a particular segment E1EDPAD occuring only once in the structure. I have PRI and QUALF in that segment. For a particular source field X, I need to send the value of QUALF as 3 and then the value of X to PRI. For another source field Y, I need to send the value of QUALF as 7 and then the value of Y to PRI.
The problem is the source IDoc has one occurence of segment E1EDPAD. How do I add a segment the second time in Idoc with the respective values?
The QUALF values are always hard coded. The other values,X and Y change

Hi Madhav,
If I create duplicate subtree option, will it change the structure in the IDoc that I have imported? Will this work at runtime?
--Ideally it will not change the structure, But it serves your mapping rquirement.
Yes, It will work at runtime.
Also what will happen if the value that I created do not come in the source file? Both X and Y are mandatory fields
-- If the the source fields are mandatory it is senders responsibility to send the fields. If you need to avoid error when the fields are not coming then you can use exist func to create the segment.
Regards,
Sudha

Similar Messages

Rollback segment creation problem

When i try to create rollback segment on oracle 9iRelease2 database in linux operating system, i got the following error, ORA-30019: Illegal rollback Segment operation in Automatic Undo mode.
I have already modified Undo_management as manual in init file.
How can i solve this problem?
Thanks

In SQL*Plus, can you check what your undo_management is set to, just to verify that it is picking up the change?
show parameter undo_managementJustin
Distributed Database Consulting, Inc.
www.ddbcinc.com/askDDBC

Profitability segment creation problem

Hi,
we have not defined order as a segment level charecteristic, but it is still creating new segment number for every service order settlement, is there any place where i need to maintain settings to avoid creaation of new profitability segment for every settlement.(all charecteristics of a segment are same in every settlement except order number which is not maintained as a segment level charecteristic) but my system is still taking the order number into consideration and creating new proftability segment for every new order. is there any way to fix this issue.

Hi,
please check that you have'nt included the following Characteristics as Profitability segment characteristics:
KSTRG Cost Object
RKAUFNR Order
Regards

Segment creation

for one idoc i have to create 4 segments wether i have to create segments seperately one by one i.e by going to we31 for each segment?

HI ,
Yes You need to create segment separetely and attach all segments to the IDOC .
Segment creation steps :
-     Go to T. Code WE31
-     Give segment name as <Z....>
-     Enter Short Text
-     Enter the Field Name and Data Element in the text boxes
-     Save, continue,
-     Click on Edit -> Set Release.
Reward if useful
Thanks
Jagadeesh.G
Edited by: Jagadeshwar Gollapelly on Apr 16, 2008 2:37 PM

Deferred segment creation

hi guys,
http://tkyte.blogspot.com/2011/02/deferred-segment-creation.html
according to tom, in 11g, it will not be the same when
SQL> select * from v$version
2 ;
BANNER
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
CORE    11.2.0.2.0      Production
TNS for 32-bit Windows: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
SQL> show parameter deferred
NAME                                 TYPE        VALUE
deferred_segment_creation            boolean     TRUE
SQL>
SQL> create user a identified by a default tablespace users;
User created.
SQL> grant create session, create table to a;
Grant succeeded.
SQL> connect a/a
Connected.
SQL>
SQL>
SQL> create table t ( x int primary key );
create table t ( x int primary key )
ERROR at line 1:
ORA-01950: no privileges on tablespace 'USERS'which is the same as
SQL> create user a identified by a default tablespace users;
User created.
SQL> grant create session, create table to a;
Grant succeeded.
SQL> disco
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL>
SQL>
SQL>
SQL> connect a/a
Connected.
SQL> create table t ( x int primary key );
create table t ( x int primary key )
ERROR at line 1:
ORA-01950: no privileges on tablespace 'USERS'

Anand.. wrote:
Hi,
I did the same on 11.2.0.2.0 version and it worked for me -
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
CORE    11.2.0.2.0      Production
TNS for 32-bit Windows: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
SQL> create user test_deferred identified by test;
User created.
SQL> grant create session, create table to test_deferred;
Grant succeeded.
SQL> show parameter deferred
NAME                                 TYPE        VALUE
deferred_segment_creation            boolean     TRUE
SQL> conn test_deferred/test
Connected.
SQL> create table t(a number);
Table created.
SQL> select segment_name from user_segments;
no rows selected
SQL> select table_name from user_tables;
TABLE_NAME
TAnandtks Anand, guess is what aman mention, some patchset not appply or something else.

Database creation problems and parition consolidation

This is my first time on here so please look past my green-ness. =)
I Installed Oracle 8.1.7 successfully and opted to setup the database creation later so I could put the database on another partition. Well, I tried once to create the database on the partition I installed oracle onto (/oracle) but I had insufficient space, It said I needed 1.3 gigs. My "/database" partition is only a 1 gig parition (and /oracle is 2 gigs). My plan was of course, to seperate them.
Ok, I didn't see an option to create the db on another partition so I resigned to using /oracle. My question now is, is the 960 megs on /oracle enough to create the database? I used the custom setup so I could see how everything was broken down and I noticed that my rollback segment is 500 megs. Is this necessary? Can I get by with 100 megs and be fine? Also, if I did do this, I'd have approximately 100 megs free for data, this is enough I hope??
Lastly, I need to combine the partitions somehow without effecting /. The hard drive is broken down into:
gigs
5.5 /
2.0 /oracle
1.0 /database
Does anyone have any ideas? In windows, I used partiton magic but I don't know if there is a linux version.
One more thought (last one for real =), it had 50 megs allocated for it's shared memory pool. I'm assuming this will take away from the 128megs I have thus effectively making only 78 available to X, will this cause any noticeable problems other than a bit of slowdown? I have most if not all of my virtual memory free at all times. I know I should get more ram, but you know how the budget thing goes...
Any help would be greatly appreciated,
Rob

Try running the catalog and catproc sql scripts.
$ cd $ORACLE_HOME/rdbms/lib
$ svrmgrl
connect internal
@catalog
@catproc
That will set up all of the internal views and packages that
oracle needs to do DDL.
Scott
Don DeLuca (guest) wrote:
: I'm gotten through the install and created the database. The
: database comes up, I can do some simple stuff like create a new
: user, create a simple table but when I try to run SQL DDL
: statements I get errors saying: "recursive SQL error". I
: looked at the sql.log file after the install. It doesn't look
: like all the packages were created successfully. Have others
had
: similiar problems with the system table/package creation? To
me
: it looks like a DDL that was needed was not called during the
: install and later caused problems during package creation.
: This is my fourth time installing and I have the same problem
: each time. I also tried to run the plsql.sql file to recreate
: some of the packages but this did not work either.
: I've just about given up and I'm starting to realize why its
: free.
null

Database creation problems

Help!! I have installed 8i on RH Linux 6.1 and followed the "Friendly" guide steps, it worked perfectly. However when I try to create a database using the Database assistant, I get an error "Oracle Not Logged on" I've reinstalled twice and still have the same problems - can anyone help?
Thanks for any suggestions/help!
null

This problem doesn't just occur on Linux. I have encountered the same on both Digital Unix and HP/UX. I finally gave up and told it to just create the scripts. Looking at the scripts, there are a number of different problems depending on the items that you choose to install and/or customizations to db setup, such as size and placing of files.
To find them, I generated the scripts and then looked at the contents and used svrmgrl to individually run commands so that I could see the "real" error message.
It's been awhile but I think the not logged on was a failure in the initial create database command... Or maybe it was the MAX_ENABLED_ROLES being too small in the default init file to support some of the products... Or the rollback segments being created as private and not being automatically added to the init before the assistant does a shutdown and restart... Or it creating the rollback segment tablespace not the size and parameters that I requested...
You may guess by now I wasn't too impressed by the dbassist program. All I can say is doesn't anyone believe in testing anymore? I have a hard time believing that anyone at Oracle actually tested running this product and actually using any of it's features.
This really pissed me off because when I first saw the pretty GUI and nice interface I thought WOW, this is great, finally something to make database creation simpler than running all those commands and scripts.

Database creation problem on Windows XP

Hello Readers
I have installed ORACLE Database Engine on windows XP.
I am facing problem in database creation.
I have tryed wizard as well as mannual method.
in wizard at 90% it gives an error "END-OF-FILE ON COMMUNICATION CHANNEL"
although CD drive is in CR Rom drive.
Please help me ....
Rashid Masood Ashraf
email: [email protected]

After going to the properties as you suggested:
Right now the Obtain an IP address automatically is checked
I need to check the Use the following IP address:
What should I enter for
IP address:
Subnet mask:
Default gateway:
Please help.
Edited by: Nel Marcus on Dec 2, 2008 3:49 PM

Remittance challan creation problem in Cross company code scenario.

I made to Advance payment to Cross comany code while posting time we deduct the TDS amount. at the time remiottance challan creation i got bellow error.please help to me
No unpaid tax lines exist for the given selection criteria.
Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
Procedure
check entries in table WITH_ITEM for the open tax items chosen for clearing.
Edited by: TEEGALA SATISH on Jun 15, 2010 5:43 PM

Hi ...Actually i am getting same problem in challan creation.. Did you get any solution? ...

Process order creation problem

I am creating a process order . while creating the process order system is throwing error as Auto batch numbering not set up for material type XXXX in plant xxxx . System is not allowing to create process order.
How to resolve the issue.

Check in CORW and switch off batch creation to isolate the problem if needed. Also see whether you have any batch managed compoents for which you have set master data for automatic batch determination.
There is no setting for material types and plant for batch. May be the error message is not correct. What is the message number?

New Excise Invoice Creation - Problem

Hi All,
I am facing problem in creation of Excise Invoice. I dont know the step by step process, can any one help me to get this ?
Best Regards
Chintesh Soni

Hi Chintesh,
if you are referring to a 100% tax invoice, please see note [887917|https://service.sap.com/sap/support/notes/887917] for 2 workarounds.
All the best,
Kerstin

Logical Standby Creation Problems "Create STatus Unknown"

We are using Grid Control 10.2.0.3 on Oracle 10.2..0.3 databases, Windows 2003 sp2 machines.
We have a primary and fsfo physical standby working properly. We went to create a logical standby on a separate server and had problems. it turned out that the listener on the server was not discovered on the target. we fixed that problem and finished the creation of the logical standby and it seems to be functioning properly now.
However, the status on the data guard page for the logical standby shows Create Status Unknown and we are unable to proceed on to create an additional standby database for other purposes. We have tried removing the logical standby target and re-discovering it but status still shows Create Status Unknown.
Is there any way to clear this status without having to drop the logical standby and completely recreate it.

The status on the agent shows it uploading successfully.
We resolved the issue by removing the logical standby from the configuration and selecting to retain the log apply. We then re-added the standby selecting to manage an existing standby database and the status went to normal.

Date of creation problem after making Bridge create TIFs with PS Image Processor.

I went through about 100 files and did what I wanted in Camera RAW (started out with NEFs). Thereafter I had Bridge make TIFs of all the files in the folder using the PS Image Processor.
Now, looking at the TIF folder in Bridge, I find that about 80 of them has a wrong creation date (I checked the Preferences and I have asked for the date of creation - and not the date of modification). As I watch (several minutes) Bridge changes some of the dates to the ones known to me to be correct - but not all. If I close Bridge, restart Bridge and open the folder again the same happens, i.e. it starts all over. Even stranger is that the Windows Pathfinder have problems with the same files - i.e. does not show the date of creation at all.
The date of these 80 files are all the same - and they have been edited over several days!
I have done a lot of work on those files and would hate to start all over. I checked and of course the dates are the original in the RAW folder that I started out with.
I am sure that I do not have any bugs in my PC.
Can I remedy this i any way? I hate to have wrong dates on my files.
What can I have done to cause this? Can anyone help me? Thanking You in advance.
Git

Thank You again.
Yes, I have also purged the cache. More than once and again this morning. It does not change the result. Bridge still goes from the date January 13th 2013 to the correct date of creation when I look at the separate thumbnails - and back again when I scroll down the page and subsequently scroll up again!
Thus it seems that Bridge knows the date that the camera set but somehow this foolish January date keeps coming back.
All the folders with NEFs have correct dates - also the ones where I have imported the files from camera to pc in 2013! Only my TIFFs have this problem.
Rigth now I am having Norton 360 run a complete system scan. When that is done I will inactivate Norton (I know that I cannot have 2 antivirus softwares and firewalls run simultaneously on the PC) and instead run a complete scan with Lavasoft Adaware Pro. I have also used Norton Utilities and found no problems. Plus Malwarebytes Antimalware and Superantispyware. No problems.
If "date file created" is the date that the file was modified, it would not help me much. I often go back to a file and play with it again and if I have understood correctly, then this date would change again. I want to see the date of capture ("date created"). Also, by now the problem afflicts at least 1000 files. It would be impossible to do single file manual corrections of dates on so many files.
Update: While I have been writing this, an opened folder with only 36 files has changed the dates to the correct date of capture. I could also scroll up and down without the dates changíng in this small folder. But when I closed Bridge, restarted it and looked at the folder again Bridge again did need minutes to get all the dates rigth. Maybe I have a pc capacity problem instead of a software problem? But why on earth would this specific wrong date result from a too weak pc.?
Maybe I should just give up and reinstall PS?
Sorry if I trouble You with a ridiculous problem.
Git

RAID creation problem,

When I try to create RAID sets, both mirrored in Disk Utility, one set works perfectly while attempting to create the other set results in the error message: "Creating RAID set failed with error: Could not find RAID"
I've tested the disks with Techtool Pro and there were no errors found on either. I have also used the repair/rebuild function in DiskWarrior on both of them as well as the repair permissions and repair disk functions in Disk Utility.
After the above error the 2 drives involved do not show up in the finder, but are still present in Disk Utility as unmounted disks. In order to act on them again they have to be initialized/formatted. After doing this they show up again, but any attempt to create a mirrored set with them continues to fail.
Is there anything that can be done to fix this? Or are these bad drives that are good at hiding it (no bad sectors, all tests+).

From your comments, I guess you are using 4 disks and trying to create two Mirrored RAIDs at the same time? If that's the case, you might try just creating 1 set using two disks, then quit Disk Utility. Launch Disk Utility, then try creating the second set using the other two disks. If that doesn't work, you might try rebooting in between RAID creations. If that doesn't work, you might try the work around seen here;
http://forums.creativecow.net/archivethread/71/480772
"2) Create 1st stripe from two devices, don't do anything to the other two yet. Shutdown Mac and turn off the power to the devices of the 1st stripe, leave the power on to the two un-stripe devices. Boot and stripe the 2nd pair, shutdown Mac. Turn power back on to the 1st stripe and reboot (all power to devices are on). Both stripes should be on the desk top."
Personally, that 'solution' seems a little dated. Disk Utility has been able to create more than one set for a while now. I just tried it. I have a Stripped BootRAID using two disks, I used a partition from another internal disk and an old external disk, connected by USB2, to create another Stripped RAID. Then I broke the new Stripped set and created a Mirrored set. I didn't have any problems creating either. I had two stripped RAIDs on a FW800 G4 running Tiger a couple years ago...
Good Luck

Generic Data Source Creation Problem....URGENT!!!!!!!!!!!!!

Hello BW Experts...!
I need to create a Generic Data Source out of a table called VBSEGK... I was trying in the usual way with RSO2 , but when I press save button after entering the Table name the following error is coming:
" Invalid Extract Stucture Template VBSEGK of Data Source ZPARK_01"
and when I click on the error message its showing
Diagnosis
You tried to generate an extract structure with the template structure VBSEGK. This operation failed, because the template structure quantity fields or currency fields, for example, field DMBTR refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissable fields.
VBSEGK is a standard table , so I cant change the Table structure. Can any one give me some idea of how to create Data source with this table ASAP ASAP please....
Please ask me questions if you didnt get this...
thanks

Hi Harish,
Please check OSS note 335342.
Symptom
The creation of a generic DataSource which is extracted from a DDIC view or a transparent table terminates with error message R8359:Invalid extract structure template &2 of Datasource &1
Other terms
OLTP, DataSource, extractor, data extraction, generic extractor
Reason and Prerequisites
The problem is caused by a program error.
Solution
The table or view used for extraction must have currency and unit fields within the field list of the table/view for all currency and quantity key figures.Otherwise the consistency of the extracted data cannot be ensured.To make the generation possible, check whether all key figures of your table refer to unit fields that are within the field list.If this is not the case, there are two possibilities:
1. A table is used for extraction.
Create a view in which you have a currency / unit field contained in the view for each key figure. The currency / unit field from the table must be included in the view to which the key figure actually refers.
Example:
Field WKGBTR of table COEP refers to the unit field WAERS of table TKA01. In a view that contains field COEP-WKGBTR, table TKA01 and field WAERS must be included in the field list.
If the currency or the unit a key figure refers to is not located in a table but in a structure, the key figure has to be removed from the view and read via a customer exit (see below). Structures cannot be included in a view.
ATTENTION!! Often the key of the table in which the referenced unit is located, does not agree with the key in the table with the corresponding key figure. In this case, the join condition of both tables is not unique in the view definition, that means for each key line of the table with the key figure, several lines of the table with the unit may be read: the result is a multiplying of the number of lines in the view by a factor corresponding to the number of lines that fit the key figure, in the unit table. To be able to deliver consistent data to a BW system, check whether the unit of the key figure in question should always have a fixed value. If yes then you can determine that in the view definition via 'GoTo -> Selection conditions'. If no, then you must proceed as follows:
a) Remove the key figure from the view
b) Define the DataSource
c) Enhance the extract structure by key figure and unit for each append (Transaction RSA6)
d) Add the key figure and the unit in a customer exit
2. A view is already used for the extraction
If it is not possible to obtain a unit of measure from a table on which the view is based, the unit field must be deleted from the field list.
A note in relation to the upward compatibility of BW-BCT InfoSources: BW-BCT 1.2B was not yet able to check units and currency fields. For this reason, it is possible that InfoSources which were defined in the source system as of BW-BCT 1.2B must be redefined as of 2000.1 in the manner described above. However, checks are absolutely essential for the consistency of the extracted data.
Regards,
Praveen

Segment creation problem

Similar Messages

Maybe you are looking for