Segment definition is not enable?

hi experts.....
after entering t.code we31 segment created , next segment definition,last changed by, radio buttion released is not accepting any data?i.e. those are not in enable stage?

As i remembered you no need to give definition of segment, when ever you give all the list of fields and dataelements and save it, automatically it will be displayed there.
please give points for all useful answers and close thread if you satisfy with the answers.

Similar Messages

IDOC Segment Definition received instead of Segment type

Hello Folks,
When i send a Z Idoc Segment from A to B System, It is successfull from A System, but in B System sometimes its erroringout because in the inbound idoc Segment Definition is coming instead of Segment type.
For Example
From A System I have sent Z1P0002 segment
B System I have received Z2P0002000(Which is the segment definition for Segment type Z1P0002)
Any inputs to above problem?

Hi,
The problem may be due to system B using a older release version of the IDoc. In those scenarios, even though your IDoc type is recognized, it may not be possible for the reciever to determine the right segment version of the reciever.
There are options in the WE20 partner profile configuration, Field Segment release in IDoc type and Segment Appl. rel. which enable the partner system preventing from erroring out.
BR/Yogesh
Edited by: Yogesh Surender on Jun 1, 2009 12:34 PM

IDOC - add new field in in existing segment definition

Hi,
For segement type say Z1MARA1 if we need to add a new field in segement definition say Z2MARA1 SAP is not allowing to add new field if we tried to cancelled the realsed 30E it not allowing since the SAP realease which we are working is 640 so only we can create new segement defination with version Z2MARA1001 with new field added but issues is that the partner Profile for outbound parameters the Segment release in IDOc Type is 31I so if we change this segment release in IDOC type to new version ie., 640 then it will pick all the new segement associated with it due to which the the format in which we pass the segements to third party will change so is there any way to use the existing segment definition which is release 30E & add addition field to it. Only one way I found is that when i try to cancel the released message is trigger so in the debug if I make it success it allows to add new field in existing segment definition but which is wrong way of doing is there any way we can used same segment definition & add new field without adding new version & new released.
Thanks in advance.
Rajeev

Varma,
I know that we can add new segement with new version my question is existing segement definition can we add a new filed because in partner profile we specified release 31i so even we create new segement type then version will be 640 so it will not pick the latest version.
Thanks
Rajeev

Urgent: Error-Record 39,779, segment 0001 is not in the cross-record table

Hi Gurus,
This is an urgent production issue: I got the following error-
I am updating data records from a DSO to Infocube in delta mode,
1.Record 39,779, segment 0001 is not in the cross-record table
2.Error in substep: End Routine
I dont know problem is in the End Routine or somewhere else,
The End routine is this:
PROGRAM trans_routine.
 CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
 DATA:
 p_check_master_data_exist
 TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
 Available information: Refer to methods of
 interface 'if_rsbk_request_admintab_view'
 p_r_request
 TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
 TYPE-POOLS: rsd, rstr.
Rule specific types
 TYPES:
 BEGIN OF tys_TG_1,
 InfoObject: ZVEHICLE Unique Vehicle ID.
 /BIC/ZVEHICLE TYPE /BIC/OIZVEHICLE,
 InfoObject: ZLOCID Mine Site.
 /BIC/ZLOCID TYPE /BIC/OIZLOCID,
 InfoObject: ZLOCSL Location Storage Location.
 /BIC/ZLOCSL TYPE /BIC/OIZLOCSL,
 InfoObject: 0VENDOR Vendor.
 VENDOR TYPE /BI0/OIVENDOR,
 InfoObject: ZNOMTK Nomination Number.
 /BIC/ZNOMTK TYPE /BIC/OIZNOMTK,
 InfoObject: ZNOMIT Nomination Item.
 /BIC/ZNOMIT TYPE /BIC/OIZNOMIT,
 InfoObject: ZNOMNR Nomination number.
 /BIC/ZNOMNR TYPE /BIC/OIZNOMNR,
 InfoObject: ZVSTTIME Vehicle Starting Time Stamp.
 /BIC/ZVSTTIME TYPE /BIC/OIZVSTTIME,
 InfoObject: ZVEDTIME Vehicle Ending Time Stamp.
 /BIC/ZVEDTIME TYPE /BIC/OIZVEDTIME,
 InfoObject: ZNETWT Net Weight.
 /BIC/ZNETWT TYPE /BIC/OIZNETWT,
 InfoObject: TU_GRS_WG Gross Wgt.
 /BIC/TU_GRS_WG TYPE /BIC/OITU_GRS_WG,
 InfoObject: ZTU_TRE_W Tare Wgt.
 /BIC/ZTU_TRE_W TYPE /BIC/OIZTU_TRE_W,
 InfoObject: ZCUSTWT Customer Weight.
 /BIC/ZCUSTWT TYPE /BIC/OIZCUSTWT,
 InfoObject: ZCAR_NO Car Number.
 /BIC/ZCAR_NO TYPE /BIC/OIZCAR_NO,
 InfoObject: ZINBND_ID Train Consist Inbound ID.
 /BIC/ZINBND_ID TYPE /BIC/OIZINBND_ID,
 InfoObject: ZOTBND_ID Train Consist Return Load.
 /BIC/ZOTBND_ID TYPE /BIC/OIZOTBND_ID,
 InfoObject: 0SOLD_TO Sold-to Party.
 SOLD_TO TYPE /BI0/OISOLD_TO,
 InfoObject: 0CUSTOMER Customer Number.
 CUSTOMER TYPE /BI0/OICUSTOMER,
 InfoObject: 0SHIP_TO Ship-To Party.
 SHIP_TO TYPE /BI0/OISHIP_TO,
 InfoObject: ZVEHI_NO Vehicle Number.
 /BIC/ZVEHI_NO TYPE /BIC/OIZVEHI_NO,
 InfoObject: ZCARSTDAT Car Start Date.
 /BIC/ZCARSTDAT TYPE /BIC/OIZCARSTDAT,
 InfoObject: ZCAREDDAT Car End Date.
 /BIC/ZCAREDDAT TYPE /BIC/OIZCAREDDAT,
 InfoObject: ZCARSTTIM Car Start Time.
 /BIC/ZCARSTTIM TYPE /BIC/OIZCARSTTIM,
 InfoObject: ZCAREDTIM Car End Time.
 /BIC/ZCAREDTIM TYPE /BIC/OIZCAREDTIM,
 InfoObject: 0COMPANY Company.
 COMPANY TYPE /BI0/OICOMPANY,
 InfoObject: ZCONTRACT Contract.
 /BIC/ZCONTRACT TYPE /BIC/OIZCONTRACT,
 InfoObject: 0PLANT Plant.
 PLANT TYPE /BI0/OIPLANT,
 InfoObject: ZLOADTIME Total Vehicle Loading time.
 /BIC/ZLOADTIME TYPE /BIC/OIZLOADTIME,
 InfoObject: ZSHIPDATE Shipping Date.
 /BIC/ZSHIPDATE TYPE /BIC/OIZSHIPDATE,
 InfoObject: ZSHIPTIME Shipping Time.
 /BIC/ZSHIPTIME TYPE /BIC/OIZSHIPTIME,
 InfoObject: ZMNEDDT Manifest End Date.
 /BIC/ZMNEDDT TYPE /BIC/OIZMNEDDT,
 InfoObject: ZMNEDTM Manifest End Time.
 /BIC/ZMNEDTM TYPE /BIC/OIZMNEDTM,
 InfoObject: ZLDEDDT Loaded End Date.
 /BIC/ZLDEDDT TYPE /BIC/OIZLDEDDT,
 InfoObject: ZLDEDTM Loaded End Time.
 /BIC/ZLDEDTM TYPE /BIC/OIZLDEDTM,
 InfoObject: ZMANVAR Manifest Variance.
 /BIC/ZMANVAR TYPE /BIC/OIZMANVAR,
 InfoObject: ZTU_TYPE Trpr Unit Type.
 /BIC/ZTU_TYPE TYPE /BIC/OIZTU_TYPE,
 InfoObject: ZACTULQTY Actual posted quantity.
 /BIC/ZACTULQTY TYPE /BIC/OIZACTULQTY,
 InfoObject: ZVEDDT Vehicle End Date.
 /BIC/ZVEDDT TYPE /BIC/OIZVEDDT,
 InfoObject: ZVEDTM Vehicle End Time.
 /BIC/ZVEDTM TYPE /BIC/OIZVEDTM,
 InfoObject: ZVSTDT Vehicle Start Date.
 /BIC/ZVSTDT TYPE /BIC/OIZVSTDT,
 InfoObject: ZVSTTM Vehicle Start Time.
 /BIC/ZVSTTM TYPE /BIC/OIZVSTTM,
 InfoObject: ZTRPT_TYP Vehicle type.
 /BIC/ZTRPT_TYP TYPE /BIC/OIZTRPT_TYP,
 InfoObject: 0CALMONTH Calendar Year/Month.
 CALMONTH TYPE /BI0/OICALMONTH,
 InfoObject: 0CALYEAR Calendar Year.
 CALYEAR TYPE /BI0/OICALYEAR,
 InfoObject: ZLOEDDT Quality Sent End Date.
 /BIC/ZLOEDDT TYPE /BIC/OIZLOEDDT,
 InfoObject: ZLOEDTM Quality sent End Time.
 /BIC/ZLOEDTM TYPE /BIC/OIZLOEDTM,
 InfoObject: ZATMDDT At Mine End Date.
 /BIC/ZATMDDT TYPE /BIC/OIZATMDDT,
 InfoObject: ZATMDTM At Mine End Time.
 /BIC/ZATMDTM TYPE /BIC/OIZATMDTM,
 InfoObject: ZDELAY Delay Duration.
 /BIC/ZDELAY TYPE /BIC/OIZDELAY,
 InfoObject: ZSITYP Schedule type.
 /BIC/ZSITYP TYPE /BIC/OIZSITYP,
 InfoObject: ZDOCIND Reference document indicator.
 /BIC/ZDOCIND TYPE /BIC/OIZDOCIND,
 InfoObject: 0BASE_UOM Base Unit of Measure.
 BASE_UOM TYPE /BI0/OIBASE_UOM,
 InfoObject: 0UNIT Unit of Measure.
 UNIT TYPE /BI0/OIUNIT,
 InfoObject: ZACT_UOM Actual UOM.
 /BIC/ZACT_UOM TYPE /BIC/OIZACT_UOM,
 Field: RECORD.
 RECORD TYPE RSARECORD,
 END OF tys_TG_1.
 TYPES:
 tyt_TG_1 TYPE STANDARD TABLE OF tys_TG_1
 WITH NON-UNIQUE DEFAULT KEY.
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line -
 METHODS
 end_routine
 IMPORTING
 request type rsrequest
 datapackid type rsdatapid
 EXPORTING
 monitor type rstr_ty_t_monitors
 CHANGING
 RESULT_PACKAGE type tyt_TG_1
 RAISING
 cx_rsrout_abort.
 METHODS
 inverse_end_routine
 IMPORTING
 i_th_fields_outbound TYPE rstran_t_field_inv
 i_r_selset_outbound TYPE REF TO cl_rsmds_set
 i_is_main_selection TYPE rs_bool
 i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
 i_r_universe_inbound TYPE REF TO cl_rsmds_universe
 CHANGING
 c_th_fields_inbound TYPE rstran_t_field_inv
 c_r_selset_inbound TYPE REF TO cl_rsmds_set
 c_exact TYPE rs_bool.
ENDCLASS. "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
... "insert your code here
$$ end of 2nd part global - insert your code only before this line *
 CLASS routine IMPLEMENTATION
CLASS lcl_transform IMPLEMENTATION.
 Method end_routine
 Calculation of result package via end routine
 Note: Update of target fields depends on rule assignment in
 transformation editor. Only fields that have a rule assigned,
 are updated to the data target.
<-> result package
METHOD end_routine.
*=== Segments ===
 FIELD-SYMBOLS:
 <RESULT_FIELDS> TYPE tys_TG_1.
 DATA:
 MONITOR_REC TYPE rstmonitor.
*$*$ begin of routine - insert your code only below this line *-*
Fill the following fields by reading Nomination and Vehicls DSO
SOLD_TO, Customer
data: L_TIMESTAMP1 TYPE timestamp,
 L_TIMESTAMP2 TYPE timestamp,
 L_TIMESTAMP3 type CCUPEAKA-TIMESTAMP,
 L_TIMESTAMP4 type CCUPEAKA-TIMESTAMP,
 L_TIMESTAMP5 type CCUPEAKA-TIMESTAMP,
 L_TIMESTAMP6 type CCUPEAKA-TIMESTAMP,
 L_TIMESTAMP7 TYPE timestamp,
 L_TIMESTAMP8 TYPE timestamp,
 L_TIMESTAMP9 type timestamp,
 L_TIMESTAMP10 type TIMESTAMP,
 L_CHAR1(14),
 L_CHAR2(14),
 l_duration type I,
 L_TS TYPE TZONREF-TZONE,
 l_flag,
 l_nomit TYPE /BIC/OIZNOMIT,
 l_error_flag.
l_TS = 'CST'.
Data: EXTRA_PACKAGE type tyt_TG_1.
data: extra_fields type tys_TG_1.
LOOP at RESULT_PACKAGE ASSIGNING <RESULT_FIELDS>.
clear l_error_flag.
Get sold_to and customer from nomination table.
 Select single SOLD_TO /BIC/ZLOCSL /BIC/ZCONTRACT COMPANY
 /BIC/ZMNEDDT /BIC/ZMNEDTM /BIC/ZLDEDDT
 /BIC/ZLDEDTM SHIP_TO /BIC/ZACTULQTY
 /BIC/ZLOEDDT /BIC/ZLOEDTM /BIC/ZDELAY
 /BIC/ZATMDDT /BIC/ZATMDTM
 /BIC/ZSITYP /BIC/ZDOCIND
 into (<RESULT_FIELDS>-SOLD_TO,
 <RESULT_FIELDS>-/BIC/ZLOCSL,
 <RESULT_FIELDS>-/BIC/ZCONTRACT,
 <RESULT_FIELDS>-company,
 <RESULT_FIELDS>-/BIC/ZMNEDDT,
 <RESULT_FIELDS>-/BIC/ZMNEDTM,
 <RESULT_FIELDS>-/BIC/ZLDEDDT,
 <RESULT_FIELDS>-/BIC/ZLDEDTM,
 <RESULT_FIELDS>-SHIP_TO,
 <RESULT_FIELDS>-/BIC/ZACTULQTY,
 <RESULT_FIELDS>-/BIC/ZLOEDDT,
 <RESULT_FIELDS>-/BIC/ZLOEDTM,
 <RESULT_FIELDS>-/BIC/ZDELAY,
 <RESULT_FIELDS>-/BIC/ZATMDDT,
 <RESULT_FIELDS>-/BIC/ZATMDTM,
 <RESULT_FIELDS>-/BIC/ZSITYP,
 <RESULT_FIELDS>-/BIC/ZDOCIND)
 from /BIC/AZTSW_0000
 where /BIC/ZNOMTK = <RESULT_FIELDS>-/BIC/ZNOMTK
 AND /BIC/ZNOMIT = <RESULT_FIELDS>-/BIC/ZNOMIT.
Select Invalid Nominations
if sy-subrc <> 0.
 l_error_flag = 'X'.
endif.
 <RESULT_FIELDS>-customer = <RESULT_FIELDS>-SOLD_TO.
Prepare time stamp for Time Differences
Vehicle Starting Time Stamp
clear : L_TIMESTAMP9,L_TIMESTAMP10.
CONVERT DATE <RESULT_FIELDS>-/BIC/ZCARSTDAT TIME
 <RESULT_FIELDS>-/BIC/ZCARSTTIM
 INTO TIME STAMP L_TIMESTAMP9 TIME ZONE l_TS.
Vehicle Ending Time Stamp
CONVERT DATE <RESULT_FIELDS>-/BIC/ZCAREDDAT TIME
 <RESULT_FIELDS>-/BIC/ZCAREDTIM
 INTO TIME STAMP L_TIMESTAMP10 TIME ZONE l_TS.
Clear : L_TIMESTAMP3, L_TIMESTAMP4,
 <RESULT_FIELDS>-/BIC/ZVEDTIME,
 <RESULT_FIELDS>-/BIC/ZVSTTIME.
<RESULT_FIELDS>-/BIC/ZVEDTIME = L_TIMESTAMP10.
<RESULT_FIELDS>-/BIC/ZVSTTIME = L_TIMESTAMP9.
L_TIMESTAMP3 = L_TIMESTAMP10.
L_TIMESTAMP4 = L_TIMESTAMP9.
Caliculate the load time
IF L_TIMESTAMP3 is initial.
 clear <RESULT_FIELDS>-/BIC/ZLOADTIME.
elseif L_TIMESTAMP4 is initial.
 clear <RESULT_FIELDS>-/BIC/ZLOADTIME.
else.
 CALL FUNCTION 'CCU_TIMESTAMP_DIFFERENCE'
 EXPORTING
 timestamp1 = L_TIMESTAMP3
 timestamp2 = L_TIMESTAMP4
 IMPORTING
 DIFFERENCE = <RESULT_FIELDS>-/BIC/ZLOADTIME
ENDIF.
Caliculate the Manifest Variance
 clear : L_TIMESTAMP5,L_TIMESTAMP6,L_TIMESTAMP7,L_TIMESTAMP8.
 CONVERT DATE <RESULT_FIELDS>-/BIC/ZMNEDDT TIME
 <RESULT_FIELDS>-/BIC/ZMNEDTM
 INTO TIME STAMP L_TIMESTAMP7 TIME ZONE l_TS.
 CONVERT DATE <RESULT_FIELDS>-/BIC/ZLDEDDT TIME
 <RESULT_FIELDS>-/BIC/ZLDEDTM
 INTO TIME STAMP L_TIMESTAMP8 TIME ZONE l_TS.
L_TIMESTAMP5 = L_TIMESTAMP7.
L_TIMESTAMP6 = L_TIMESTAMP8.
Caliculate the Maniefest Variance
IF L_TIMESTAMP5 is initial.
 clear <RESULT_FIELDS>-/BIC/ZMANVAR.
elseif L_TIMESTAMP6 is initial.
 clear <RESULT_FIELDS>-/BIC/ZMANVAR.
else.
 CALL FUNCTION 'CCU_TIMESTAMP_DIFFERENCE'
 EXPORTING
 timestamp1 = L_TIMESTAMP5
 timestamp2 = L_TIMESTAMP6
 IMPORTING
 DIFFERENCE = <RESULT_FIELDS>-/BIC/ZMANVAR
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDIF.
Delete datapackets with blank nominations
Delete datapackets with blank shipdate and Invalid Time Stamps
*IF <RESULT_FIELDS>-/BIC/ZNOMTK IS INITIAL OR
<RESULT_FIELDS>-/BIC/ZSHIPDATE IS INITIAL.
l_error_flag = 'X'.
*ENDIF.
<RESULT_FIELDS>-/BIC/ZVEHI_NO = 1.
<RESULT_FIELDS>-CALMONTH = <RESULT_FIELDS>-/BIC/ZSHIPDATE(6).
<RESULT_FIELDS>-CALYEAR = <RESULT_FIELDS>-/BIC/ZSHIPDATE(4).
if l_error_flag = 'X'.
Looks like Monitor Entries are not working in SP11.
Hence the following is commented temporarily.
CLEAR MONITOR_REC.
MONITOR_REC-MSGID = '0M'.
MONITOR_REC-MSGTY = 'S'.
MONITOR_REC-MSGNO = '501'.
MONITOR_REC-MSGV1 = <RESULT_FIELDS>-/BIC/ZNOMTK.
MONITOR_REC-recno = sy-tabix.
APPEND MONITOR_REC to MONITOR.
RAISE exception type CX_RSROUT_ABORT.
DELETE RESULT_PACKAGE index sy-tabix.
CLEAR L_ERROR_FLAG.
else.
 MODIFY RESULT_PACKAGE FROM <RESULT_FIELDS>.
endif.
clear l_nomit.
l_nomit = <RESULT_FIELDS>-/BIC/ZNOMIT.
extra_fields = <RESULT_FIELDS>.
Actual Qty and Contract details
 Select /BIC/ZLOCSL /BIC/ZNOMIT /BIC/ZCONTRACT /BIC/ZACTULQTY
 /BIC/ZSITYP /BIC/ZDOCIND
 SOLD_TO SHIP_TO COMPANY
 into (extra_fields-/BIC/ZLOCSL,
 extra_fields-/BIC/ZNOMIT,
 extra_fields-/BIC/ZCONTRACT,
 extra_fields-/BIC/ZACTULQTY,
 extra_fields-/BIC/ZSITYP,
 extra_fields-/BIC/ZDOCIND,
 extra_fields-SOLD_TO,
 extra_fields-SHIP_TO,
 extra_fields-company)
 from /BIC/AZTSW_0000
 where /BIC/ZNOMTK = <RESULT_FIELDS>-/BIC/ZNOMTK AND
 /BIC/ZNOMIT <> l_NOMIT.
 INSERT extra_fields into table EXTRA_PACKAGE.
 endselect.
ENDLOOP.
Append lines of extra_package to RESULT_PACKAGE.
*-- fill table "MONITOR" with values of structure "MONITOR_REC"
*- to make monitor entries
... "to cancel the update process
 raise exception type CX_RSROUT_ABORT.
$$ end of routine - insert your code only before this line -
ENDMETHOD. "end_routine
 Method inverse_end_routine
 This subroutine needs to be implemented only for direct access
 (for better performance) and for the Report/Report Interface
 (drill through).
 The inverse routine should transform a projection and
 a selection for the target to a projection and a selection
 for the source, respectively.
 If the implementation remains empty all fields are filled and
 all values are selected.
METHOD inverse_end_routine.
$$ begin of inverse routine - insert your code only below this line-
... "insert your code here
$$ end of inverse routine - insert your code only before this line -
ENDMETHOD. "inverse_end_routine
ENDCLASS. "routine IMPLEMENTATION

Hi,
Most probably you are appending some records in the data package or deleting from the data package through end routine or expert routine or start routine.
I just solved it.....you will have to import the note 1180163.
Then modify the code which you are using....and include the function module as mentioned in the note 1223532.
You need to add the function module just before you append the records.This will work perfectly.
Thanks
Ajeet

XI IDOC missing segment definition in type E1LFM1M

Hi experts,
we have recently upgraded our ERP system to NW 702 EH5. As aresult a new segment definition was added to our segment type E1LFM1M ( segment def. E2LFM1M007). The problem we are havign is that our XI system is still running on NW700 and it doesnt have this segment defintion. Since the upgrade we are getting an error in transaction RFC complaining about the new segment definition E2LFM1M007 everytime we try to send a vendor from ERP to SUS using BD14. Is there a way we can deactivate the new segment definition E2LFM1M007 in segment type E1LFM1M?
Thanks,
Abdul.

Hi Abdul,
Actually it does not matter what are your systems' versions, PI can always handle an IDoc properly. All you need to do is perform the following steps in your PI system:
1. Log on to ABAP stack, go to t-code idx2, find your ECC system and that particular IDoc (I believe this will be CREMAS) and delete its metadata.
2. Log on to Enterprise Services Repository, find your SWCV where the IDoc definition was loaded, and load it again from your ECC system, then activate the change.
3. If necessary, also adjust the message mapping to use/not use the new segment. Activate your changes.
Once you have these steps completed, you are ready to retest your scenario and say goodbye to the error.
Hope this helps,
Grzegorz

Add IT0006 custom fields for segment definition E1P0006 basic type HRMD_A06

Hello! I am am trying to determine how to bring in our custom fields from IT0006 into our IDOC's for message type HRMD_A basic type HRMD_A06 without performing a custom SAP modification. I was able to create a new segement definition called Z1P0006 and replace the SAP standard E1P0006 IDOC segment defintion in table T777D for infotyp 0006 to Z1P0006. However, I receive a message that I must not maintain this IDOC segment manually and instead you must maintain infotypes and their individual elements by using the transactions for processing infotypes: PPCI or PM01 (Infotype copy transaction for personnel administration).
Does anyone know of a way to bring in the new custom infotype fields from i.e. reimport the table structure for IT0006 into the segment definition without a custom SAP modificaiton? I would really appreciate any help on this topic!
Thanks!
Holly

unfortunately, the standard do not provide the infotypes for the HR-TM (Time Management), that
are between the structures i must send in the other system sap.
Ok, I have never delt with Time data in HRMD_A. Probably this is the case then
Ok,now i've checked the filter in BD64 and the tables BDCP2, CDHDR and CDPOS but it seems
all correct!!
By checking Filters I mean that confirm if you have added Time Infotypes there (just
making sure). If data is appearing in BDCP2 that means there is no problem in Change
pointer creation, Just ruling out possibility.
Try with an user exit it's a good idea, but why in the PFAL the idoc (with the custom segments)
is created without problems and in the BD21 no??? This is very strange
1) Well BD21 uses the Function module (TBDME for HRMD_A) which read change pointers and
create IDOCs. So now if you have extended Segment you have to add your population code
here somewhere.
2) PFAL is Push program, my assimption here is you have wriiten some piece of code to
populate Additinal segments data here? Otherwise IDOC will not be populated
automatically.
Let me know what you think.

IDoc - Get Segment Definition or Version in Code

I'm working on the ABAP-PI Port, created a FM based on FM OWN_FUNCTION now.
In my FM, there is a call to a function
CALL FUNCTION 'EDI_SEGMENTS_GET_ALL'
that retrieves all the segment data for a particular IDoc number.
However, it returns only the segment name EDIDD-SEGNAM and not the segment definition.
Example:
Value returned: "E1EDKA1" ( EDIDD-SEGNAM , 27 char long field)
I'm actually looking for the Segment Definition that goes up to 30 characters long.
Value I need to be returned: "E2EDKA1001" - has the extra 3 digits at the end that represents the Version.
If you go to WEDI, Development > IDoc Segments, You can see that the Segment definitions belong to a data type EDISEGDEF (30 characters long).
Does anyone know how I can get this programmatically?
The IDoc file downloaded by the FILE port stores the 30 char Segment Definition in the file
Using the ABAP-PI it only returns the segment name (27 char)

Hi all,
Thanks for your replies.
EDISDEF might be useful, but I'm not sure how to use it at the moment.
I am supplied in the code a structure of type EDIDC, which has the following values (not all are listed)
MANDT C 3 308
DOCNUM N 16 0000000000002050
DOCREL C 4 640
STATUS C 2 03
DOCTYP C 8
DIRECT C 1 1
RCVPOR C 10 SUBSYSABAP
RCVPRT C 2 B
The above represnets a particular IDoc being processed (see DOCNUM and DOCREL)
The default code then uses a FM to get the segment data based on the DOCNUM.
CALL FUNCTION 'EDI_SEGMENTS_GET_ALL'
 EXPORTING
 DOCUMENT_NUMBER = I_EDIDC-DOCNUM
 TABLES
 IDOC_CONTAINERS = I_EDIDD
 EXCEPTIONS
 DOCUMENT_NUMBER_INVALID = 1
 END_OF_DOCUMENT = 2
 OTHERS = 3.
Does anyone know of any FM that returns a EDID4 (has 30 char segment version) structure instead of a EDIDD structure (27 char seg def)?
And the value EDIDC-DOCREL (SAP Release for IDoc) e.g.
640
does not match up with values available in EDISDEF-RELEASED (IDoc development: Release of segment definition), e.g.
30F
40A
45A

How can I find if the segment definitions are
E2EDKA1 or
E2EDKA1001 or
E2EDKA1002 or
E2EDKA1003

Line 1 Error - Value 120 for the flexfield segment Company does not exist

{color:#0000ff}Receiving the following error message in the "Submit Expense Report - Expense Allocation" page:
"Error : Line 1 Error - Value 120 for the flexfield segment Company does not exist in the value set XX_GL_COMPANY"
This error message is shown when the user is entering the expense report in R12 Oracle Internet Expenses responsibility. After the user has finished entering the expense lines and after the user has reviewed the default expense allocation values in the expense allocation page, upon clicking on the next button , this error message is shown.
Has anybody experienced this issue?
We have opened a Service Request with Oracle but so far there is no resolution. This issue occurs intermittently. It is NOT consistent. We have advised the user base with the following workarounds to over this bug:
1. The system administrator shall clear the cache using Functional Administrator responsonsibility
OR
2. Advise the application user to sign-off from Oracle Applications and allow 5 minutes before they sign-in again.
Any help or advise in the matter is appreciated.
Thank you.
{color}

Check these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks

"Segment Version could not be read" Error in IDX2

Hi All,
I did one File-IDOC Scenario. But now there is a change in IDOC Structure. A extra segmetn is added. Now i reimported the definition in Design and made changes accordingly.
But while trying to import the idoc in IDX2 i m getting a error that segment version could not be found.
What might be the reason for this. Do i need to do any changes in the Channel Definition or Is it a Error in R/3 side?

Check if new segment is released in R/3 system ..
Go to transaction WE30 on R/3. Give your IDoc type..double click to new created segment>segment editor> there see if Released check box is check..
As you are saying new seg is reimported in IDoc then the segment must be released ..

Segment definition version

Hi,
We have generated IDOC for basic type MATMAS03
and following are some of the segments, their versions and release.
Segment type Version Release
E1MARAM 005 620
E1MARMM 002 620
For segment type E1MARAM and E1MARMM we want to use following version and release
keeping rest of the things same.
Segment type Version Release
E1MARAM 004 46C
E1MARMM 001 46A
Is it possible to create idoc with these versions for segment E1MARAM and E1MARMM.
I am using FM MASTER_IDOC_DISTRIBUTE.
Rgds,
Fattesingh

Hi all,
Thanks for your replies.
EDISDEF might be useful, but I'm not sure how to use it at the moment.
I am supplied in the code a structure of type EDIDC, which has the following values (not all are listed)
MANDT C 3 308
DOCNUM N 16 0000000000002050
DOCREL C 4 640
STATUS C 2 03
DOCTYP C 8
DIRECT C 1 1
RCVPOR C 10 SUBSYSABAP
RCVPRT C 2 B
The above represnets a particular IDoc being processed (see DOCNUM and DOCREL)
The default code then uses a FM to get the segment data based on the DOCNUM.
CALL FUNCTION 'EDI_SEGMENTS_GET_ALL'
 EXPORTING
 DOCUMENT_NUMBER = I_EDIDC-DOCNUM
 TABLES
 IDOC_CONTAINERS = I_EDIDD
 EXCEPTIONS
 DOCUMENT_NUMBER_INVALID = 1
 END_OF_DOCUMENT = 2
 OTHERS = 3.
Does anyone know of any FM that returns a EDID4 (has 30 char segment version) structure instead of a EDIDD structure (27 char seg def)?
And the value EDIDC-DOCREL (SAP Release for IDoc) e.g.
640
does not match up with values available in EDISDEF-RELEASED (IDoc development: Release of segment definition), e.g.
30F
40A
45A

How can I find if the segment definitions are
E2EDKA1 or
E2EDKA1001 or
E2EDKA1002 or
E2EDKA1003

Perosonalization is not Enabled

Hi,
In my Enter prise Portal, the Personalization is not Enabled, why because i don't know, remaining is fine.pls answer this one ASAP.
Regards,
Jagadish Babu Kanikanti.

I want to piggyback on this question a bit. I'm getting conflicting information in the forums on this topic. Some posts say that you require the eu_role in order for the personalization link to appear in the masthead and others say all you need is the personlize portal workset assigned to a role that you have access to. I have assigned the workset to a copy of the eu_role, but the personalize link does not appear in the masthead. I can access it directly via navigation in the personalize portal workset, but I cannot get the masthead link to display. Can someone give a definitive answer on whether or not the eu_role is specifically required in order to get the Personalize link to display in the Masthead? I would like this link in the masthead, but do not want to use the eu_role because I don't want everything in that role, nor do I want to modify the standard delivered eu_role.

The located assembly's manifest definition does not match the assembly refe

Hi,
I am getting following error when i run my application.
Error - Could not load file or assembly 'Oracle.DataAccess, Version=2.102.2.21, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
When i copied Oracle.DataAccess.dll from the application server to my machine at that time also version complixct error is comming. Application server in 64 bit and my machine in 32 bit.
Please help on this issue.

Hey Thrik - I would like to know that whether you have resoved / identified the problem or not.
I feel that root cause of this problem might be ODAC for .net
Until I installed ODAC, it was working fine but after this, suddenly I am getting the below message in yellow screen.
Pl. let me know if you also encounter after installing ODAC or ODP.
Today, I also got the similar kind of error. (Below is the snippet of the page).
Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileLoadException: Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Stack Trace:
[FileLoadException: Could not load file or assembly 'Oracle.DataAccess' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
[FileLoadException: Could not load file or assembly 'Oracle.DataAccess, Version=1.111.6.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
System.Reflection.Assembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) +0
System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +211
System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) +141
System.Reflection.Assembly.Load(String assemblyString) +25
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +32
[ConfigurationErrorsException: Could not load file or assembly 'Oracle.DataAccess, Version=1.111.6.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
System.Web.Configuration.CompilationSection.LoadAssemblyHelper(String assemblyName, Boolean starDirective) +596
System.Web.Configuration.CompilationSection.LoadAllAssembliesFromAppDomainBinDirectory() +3479081
System.Web.Configuration.CompilationSection.LoadAssembly(AssemblyInfo ai) +46
System.Web.Compilation.BuildManager.GetReferencedAssemblies(CompilationSection compConfig) +177
System.Web.Compilation.BuildProvidersCompiler..ctor(VirtualPath configPath, Boolean supportLocalization, String outputAssemblyName) +180
System.Web.Compilation.ApplicationBuildProvider.GetGlobalAsaxBuildResult(Boolean isPrecompiledApp) +3446661
System.Web.Compilation.BuildManager.CompileGlobalAsax() +51
System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +462
[HttpException (0x80004005): Could not load file or assembly 'Oracle.DataAccess, Version=1.111.6.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
System.Web.Compilation.BuildManager.ReportTopLevelCompilationException() +57
System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +612
System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters) +456
[HttpException (0x80004005): Could not load file or assembly 'Oracle.DataAccess, Version=1.111.6.0, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)]
System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +3426887
System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +88
System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +149
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42

QuickTime Pro v7.6 Windows installed But Features Not Enabled.

I have the Windows version of QuickTime installed.
I have upgraded to Pro (e.g. the Control Panel says "QuickTime 7 Pro")
Some Pro features are still still greyed out, example: copy/paste. Even if I "select" a movie segment, or "select all", "copy" is not enabled.

I see this is an older post but I am having this same problem. I WAS trying to edit an MPEG. However, I saved it as a Quicktime movie, closed everything and reopened. I am still having the same problem. It can play the selected area, and I know I have Pro installed because I can rotate the video, etc., but copy, cut and paste are still greyed out.
Thanks!
Victoria...

AUTH Command is not enabled, when try to enable webmail with smtp auth

Hi,
I'm trying to force all the webmail users to authenticate (smtp auth) when they send an email.
I already configure this:
local.service.http.smtpauthpassword = xxxxx
local.service.http.smtpauthuser = admin
and reload the http service. (the password is correct)
Then, enter to the webmail interface and tried to sent an email but when pressed "sent" the following message appears:
SMTP: Error 5.7.1 AUTH Command is not enabled.
Do I have to do something else? Any lead?
Regards

Thanks Jay,
I know about the little use of the webmail authentication but it is something I need to do because in my configuration I have to differentiate between users who can send emails to internet and users who can not, and in order to do that, I need to authenticate all the users. So far is working if the user uses an email client.
For webmail I did not know that I have to add in the tcp_intranet channel definition the attribute: mustsaslserver.

Language not enabled

I've the problem during open the workflow builder, i get the error "err. 1004 - Language not enabled". i tried to put the value in the regedit as "AMERICAN_AMERICA.US7ASCII" or "AMERICAN_AMERICA.WE8ISO8859P1" but is still the same error occured. i checked the user preference,database, everything goes fine, but im really dunno what happended.
Pls help me, Thanks

Hello,
Which workflow are you trying to load? Looks like you are loading a non-US workflow definition.
The errors occur when Workflow is in a language other than English and the installed language is not enabled for Workflow
Add the language using the Workflow Config Assistant and re-load the workflow definitions
Cheers,
Raja

Segment definition is not enable?

Similar Messages

Maybe you are looking for