Segment E1EDP36 not active in the DELFOR02 IDOC type.

Hi All,
I have been working with creating extensions for Idoc type DELFOR02  inn ECC 6.0. But for the basic idoc type DELFOR02 , the segment E1EDP36 is not active here.i.e., the idoc generated does not carry data for this particular segement.
This segment depends on entries in a structure xisautoeklwes ( include LEINMF3S, line 130). The underlying table for this structure would be ISAUTOEKLWES(Last Deliveries for FLAB).
  Could anyone throw light on how this structure will be filled or how it has to be filled if I can make changes to the customer exit available there.
Thanks,
Savitha Patil

Hi Gearge,
To add custom segments, you should create an extension.
the TCODE is we30.
Refer this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/frameset.htm
Regards,
Ravi

Similar Messages

  • Segment E1IDBW1 is missing for the inbound idoc type PAYEXT

    Hello,
    the above segment is missing in the inbound idoc - basic type pexr2002.
    I have checked in TC-we30 and its available there.
    but still the idoc is getting generated without this segment.
    can someone suggest.
    thanks
    Arun

    Hi All,
    I have a similar query to that of Penny. We are able to get the standard IDOC to generate with segment E1IDBW1. It contains the standard fields INPWEEMP, INPWTXT1, INPWTXT2. However, we have a requirement to manipulate the standard contents of these fields. We wanted to use user exit EXIT_SAPLIEDP_002 to do this.
    I have maintained user exit EXIT_SAPLIEDP_002 but when we enter this on creation of the IDOC the segment E1IDBW1 does not seem to be available in table EDIDD_TABLE for manipulation. Can you advise please if (1) you were able to get E1IDBW1 available to edit in exit EXIT_SAPLIEDP_002  and (2) were you able to manipulate the contents of INPWTXT1, INPWTXT2 etc?
    We have done the following steps:
    - BTE 2441 is available on our release
    - house bank has been setup as an In House Cash Center which allows E1IDBW1 to be generated
    - entry has been maintained in table FEDICUS with Message Type = PAYEXT, BasicType = PEXR2002, Extension = Blank, Seg Type = E1IDBW1
    - code maintained in ZXF08U04
    The system enters ZXF08U04 but E1IDBW1 is not available there for manipulation.
    Can you advise what we might be missing please?
    Thanks and regards
    Mike

  • I updated my iphone 3gs to ios 5.0.1 from ios 4 , now its saying that sim is not activated but the sim is still inside

    i updated my iphone 3gs to ios 5.0.1 from ios 4 , now its saying that sim is not activated but the sim is still inside
    PLSS HELP ME OUT !!!!

    Sounds like your phone was hacked to work with any network. Doing the update re-locked it to the original carrier. All you can do now is contact the carrier it is locked to to see if they have an unlocking policy. Note that if it's AT&T they do not offer unlocking. otherwise find an un-activated sim for the original carrier and you can use it as an iPod.

  • Some pages of my website are not active from the home page

    Built my website with iweb.  When I go to the site the tabs to all the pages show, but several of them are not active from the home page.  If I go to one of the active pages I can then click on the other pages.  Is there a way to fix this?  I've tried reloading the entire site, but several of the tabs remain inactive from the home page.  Any help would be greatly appreciate - Thanks,  Jodi

    Thanks Roddy - I tried moving it down and it didn't work - That line is in the Template I used to build the site and is on every page.  I did finally get the command A to work, but there's nothing covering those bottom three tabs.
    However, when I put my mouse in the area of the box where it has my name (the image you sent me above) it shows a link desktop/site/booker_files and I noticed I have one of the rss feed blue arrows, but I can't seem to delete it.  I wonder if that has something to do with it.  It does the same thing on the website if you hover with your mouse. 
    Truly appreciate your help.
    Jodi

  • CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.

    Hello and sorry for my english. My name is Jean-Pierre BRETHES and I have a problem with the creativecloud.exe program which doesn't want anymore to start. (since a while now) The icon in the system tray doesn't appear and it still to be gray (not red). When I clic to lunch the program nothing happen. When I try to reinstall it the download end by a windows "error 50" and everything is stopped.
    AT the beginning I wanted to download In design  program to try the PAO functionalities. Thank to help me. My email adress is <removed email - kglad>. Have a nice day. JP

    Hello and sorry for the delay. Thank you for your answer. I did what you wrote and everything is fine now. Really thank you for that. I fully understood regarding my email address in my message. I will not anymore do this error.
    Have a nice day.
    Sincerely, Jean-Pierre BRETHES
    De : kglad 
    Envoyé : dimanche 6 juillet 2014 23:33
    À : Jean Pierre BRETHES
    Objet :  CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.
    CreativeCloud.exe doesn't work anymore. It seens to be not activated in the system tray.
    created by kglad <https://forums.adobe.com/people/kglad>  in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/6527054#6527054>

  • Resource com.sap.aii.af.svc with type service, not active on the server

    Hi Forum,
    in my X1 server, in rwb, it gave error:
    HTTP request failed. Error code: "503". Error message: "Service Unavailable [http://xyz:50000/AdapterFramework/rtc,
    on further analysis we find that:
    <b>  Application cannot be started.
      Details:   com.sap.engine.services.deploy.container.ExceptionInfo: Application sap.com/com.sap.xi.mdt cannot be started. Reason: it has hard reference to resource com.sap.aii.af.svc with type service, which is not active on the server.</b>
    and the service/component com.sap.aii.af.svc is not present as the error says,
    In visual admin, in the services list i couldnt find this particular resource,
    pls instruct me how to deploy/start this service com.sap.aii.af.svc ,

    Hi,
    Please check out the user authorization and role and also check that you are maintaining the passwords in all places where required.
    Regards
    Aashish Sinha
    PS : reward points if helpful

  • RFC Error:The BW IDoc type ZSBA011 is not the same as the source system

    Hi Experts,
    RSA1&#61664;Source System &#61664;(Context Menu) Check
    I am getting the below error
    <b>‘The BW IDoc type ZSBA011 is not the same as the source system  IDoc type ZSBD012 ‘              </b>                              
    What might happened wrong.When i checked with my Basis Consultant who is new to job,Replied every this is ok with regeards to RFC.
    Where should i check to correct the error
    Thanks

    Hi,
    Did you do a system copy for BW ?
    Try a restore (rightclick on your source system) in most cases this will solve the problem.
    If not check the notes below:
    184322  Procedure after DB copy of BW source systems 
    886102      System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
    325470      Activities after client copy in BW source systems
    325525      Copying and renaming systems in a BW environment
    184754      Procedure after BW database copy
    184447      Building a BW-system landscape
    184971      Notes on BW source system connections
    140276      Error in source system assignment
    524554      Storing destinations in the BW environment
    538052  Maintenance of Myself destination in BW
    Regards, Patrick Rieken
    Message was edited by:
            Patrick Rieken - BI-Formance B.V.

  • Problems Shared Services:Registered application is not active at the moment

    Hi!
    I have a problem with Hyperion Shared Services (HSS) and Hyperion Performance Socrecard (HPS), my projecto from HPS appears like if not it was registered in HSS.
    The error is: Registered application is not active at the moment. Please consult your system administrator.
    The information was migrated from other server, now already run configuration utility and configurate my proyect, but not appears in HSS.
    Optional: This is necessary for assign sercurity roles by Domain?
    Thank you very much.

    Did you get this resolved .
    Vinod

  • SSO logon not possible; logon tickets not activated on the server

    When I am on RWB
    1)  click "component monitoring" ->"display all"
    2) click "CCMS"
    I get a popup says:
    "SSO logon not possible; logon tickets not activated on the server"
    I find some threads about this on SDN but they are about
    EP. My case is PI7.0SP08.
    Please advise how to overcome this issue?
    Thanks w/ points.
    Message was edited by:
            jennifer lee

    hI,
    do you have the follwoing in our SXMB_ADM if not add them.
    SXMB_ADM->IntegrationEngine configuratin-> edit the speicifc configuratin then add the follwoing
    Category:RUNTIME Parameters: logging Value:1
    If its done. check this alos...whether your browser settings will accept the cookies or not. for SSO logon ticket method you need to have cookies accepted by our browser so check it. in internet page slect TOOLS ->internet options then ckeck for cookies settings.
    How to Enable Single-Sign-On for XI 3.0 at:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/69d95112-0d01-0010-8297-fa31feea26e0
    /people/alexander.bundschuh/blog/2007/01/16/principal-propagation-in-sap-xi
    http://help.sap.com/saphelp_nw2004s/helpdata/en/5c/b7d53ae8ab9248e10000000a114084/content.htm
    regards
    manoj kumar

  • Registered application is not active at the moment.

    Two symtoms
    This happens with the Native Admin or any MSAD Shared Services admin.
    When in Shared Services - Right Click on Hyperion System 9 BI+ - the option to Assign Preference is not available
    Also when selecting the same project the following message -
    Registered application is not active at the moment. Please consult your system administrator.
    This is not of a case of it breaking. This was the symptom since the original installation.
    System 9.3.1 -
    Note - Regestering BI with Shared Services does an interesting thing - The menu appears to Assign Preference - but a page cannot be displayed also appears.
    When recycling services the menu option disappears again.
    Any thoughts?

    Hi,
    I have exactly the same error with a different external directory wich is Open LDAP.
    Did you get any answers or tips around this error ?
    Thanks,
    Gaël.

  • Registered application is not active at the moment. Please consult your sys

    Registered application is not active at the moment. Please consult your system administrator. This is what I often (and now) see when opening the default created application "Hyperion System 9 BI+:#####.intranet.######.nl:6800::1 BI+ 9.3.1 " under default created project "Hyperion System 9 BI+" in Shared Services. Even after restaring all the relevant services in the right sequence with the right delay I still got the message. Anyone an idea?

    Hi,
    I'm also interested in the answer, if you got it.
    Thanks,

  • Container MigrationContainer is not active at the moment

    Hi All,
    Below mentioned error encountered while deploying SAP-CRMDIC component using the file SAPCRMDIC17_0-10002941.SCA. It ended up in "ERROR" status in JSPM.
    Problem might be due to the "inactive container". Could you please let me know a easiest method to deploy the SAP-CRMDIC component.
    predecessor system -
                         com.sap.engine.services.deploy.exceptions.ServerDeploymentE
    xception: Container MigrationContainer is not active at the moment and it is not
    possible to update sap.com/crmmigrxcm.
                            at com.sap.engine.services.deploy.server.application.Upd
    ateTransaction.getConcernedContainers(UpdateTransaction.java:485)
                            at com.sap.engine.services.deploy.server.application.Dep
    loyUtilTransaction.commonBegin(DeployUtilTransaction.java:265)
                            at com.sap.engine.services.deploy.server.application.Upd
    ateTransaction.begin(UpdateTransaction.java:166)
                            at com.sap.engine.services.deploy.server.application.App
    licationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
                            at com.sap.engine.services.deploy.server.application.App
    licationTransaction.makeAllPhases(ApplicationTransaction.java:326)
                            at com.sap.engine.services.deploy.server.DeployServiceIm
    pl.makeGlobalTransaction(DeployServiceImpl.java:3190)
                            at com.sap.engine.services.deploy.server.DeployServiceIm
    pl.update(DeployServiceImpl.java:671)
                            at com.sap.engine.services.deploy.server.DeployServiceIm
    plp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
                            at com.sap.engine.services.rmi_p4.DispatchImpl._runInter
    nal(DispatchImpl.java:330)
                            at com.sap.engine.services.rmi_p4.DispatchImpl._run(Disp
    atchImpl.java:201)
                            at com.sap.engine.services.rmi_p4.server.P4SessionProces
    sor.request(P4SessionProcessor.java:137)
                            at com.sap.engine.core.service630.context.cluster.sessio
    n.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.ja
    va:33)
                            at com.sap.engine.core.cluster.impl6.session.MessageRunn
    er.run(MessageRunner.java:41)
                            at com.sap.engine.core.thread.impl3.ActionObject.run(Act
    ionObject.java:37)
                            at java.security.AccessController.doPrivileged(AccessCon
    troller.java:207)
                            at com.sap.engine.core.thread.impl3.SingleThread.execute
    (SingleThread.java:104)
                            at com.sap.engine.core.thread.impl3.SingleThread.run(Sin
    gleThread.java:176)
                         For detailed information see the log file of the Deploy Ser
    vice.
    11/02/12 19:54:04 -  ***********************************************************
    Feb 12, 2011 7:54:04 PM  Info: End of log messages of the target system.
    Feb 12, 2011 7:54:04 PM  Info: ***** End of SAP J2EE Engine Deployment (J2EE App
    lication) *****
    Feb 12, 2011 7:54:04 PM  Error: Aborted: development component 'crm/migr/xcm'/'s
    ap.com'/'MAIN_CRM50VAL_C'/'7630861'/'2', grouped by :
    Caught exception during application deployment from SAP J2EE Engine's deploy ser
    vice:
    java.rmi.RemoteException: Cannot deploy application sap.com/crmmigrxcm..
    Reason: Container MigrationContainer is not active at the moment and it is not p
    ossible to update sap.com/crmmigrxcm.; nested exception is:
            com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Con
    tainer MigrationContainer is not active at the moment and it is not possible to
    update sap.com/crmmigrxcm.
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDepl
    oyerImpl.performAction(DeploymentActionTypes).REMEXC)
    Feb 12, 2011 7:54:04 PM  Info: Starting to save the repository
    Feb 12, 2011 7:54:05 PM  Info: Finished saving the repository
    Feb 12, 2011 7:54:05 PM  Info: Starting: Update: Selected software component 'SA
    P-CRMDIC'/'sap.com'/'MAIN_CRM50VAL_C'/'1000.5.0.17.0.20100820072113''/'2' update
    s currently deployed software component 'SAP-CRMDIC'/'sap.com'/'MAIN_CRM50VAL_C'
    /'1000.5.0.14.0.20090211084319''/'1'.
    Feb 12, 2011 7:54:05 PM  Error: Aborted: software component 'SAP-CRMDIC'/'sap.co
    m'/'MAIN_CRM50VAL_C'/'1000.5.0.17.0.20100820072113''/'2':
    Failed deployment of SDAs:
    development component 'crm/migr/xcm'/'sap.com'/'MAIN_CRM50VAL_C'/'7630861'/'2' :
    aborted
    Please, look at error logs above for more information!
    Feb 12, 2011 7:54:05 PM  Info: Starting to save the repository
    Feb 12, 2011 7:54:05 PM  Info: Finished saving the repository
    Feb 12, 2011 7:54:05 PM  Info: J2EE Engine is in same state (online/offline) as
    it has been before this deployment process.
    Feb 12, 2011 7:54:05 Error: -
    At least one of the Deployments
    failed -
    Thanks.

    Hi,
    You would need to start the services MigrationService and MigrationContainer using following commands.
    - connect via telnet to the system: telnet <hostname> 5<instance number>04
    - authenticate with administrator username/password
    - jump <server_id>         Server ID can be obtained from the Visual Administrator/or from System Information Page.
    - startservice MigrationService
    - startservice MigrationContainer
    Then retry the deployment.
    Regards,
    Srikishan

  • Java is not active in the application server

    Hi Experts
    We recently installed CRM 5.0.  Everything seems to have installed without any issues. 
    However, we are having a few issues the Java Virtual Machine (VMC). 
    When trying to access the VMC through ABAP side of CRM (SM53), it gives and error message that "Java is not active in the application server". 
    Eventhough everything seems to have been installed.
    Any ideas on how to activate java. 
    Any help would be really appreciated.
    Thanks
    Imran Khan

    Hi Daniele:
    There are indeed only 3 parameter additions
    vmcj/enable = on
    vmcj/option/ps = 512M
    vmcj/option/maxJavaHeap = 200M
    The 4th one is just explanation for calculating sizes.
    My VMC is active with only the above three settings.
    Also make sure that the SP level for both the JAVA components and ABAP components is the same.  i.e. they are both running on the latest version.  The latest update was released in Late April.
    If the SPs are from differnt releases, the VMC will not work.
    Also, go into the server and have a look at the parameter file to make sure that settings are actually there. i have found out that settings  in RZ10 and the real parameter settings can be different.  Just make sure that the settings you want the system to take are indeed in the real parameter file.
    I am not sure what else you can do...but rest assured that the thing works with the above mentioned settings.
    Imran

  • HT4972 i can't activate my iphone . it says your iphone could not activated because the activation server is temporarily unavailable . can i activate leter???? or ....

    i can't activate my iphone . it says your iphone could not activated because the activation server is temporarily unavailable . can i activate leter???? or ....

    IOS: Resolving activation messages
    http://support.apple.com/kb/TS4242

  • HT201407 how to fix iphone could not activated because the activation server is temporarily unavailable

    Dear All,
    After I upgrade ios4.1 to ios6.1.3 but my iphone 3gs shows the sentence below:
    how to fix iphone could not activated because the activation server is temporarily unavailable
    Please give me the ways to fix it
    Thanks in advance

    Thi is usually a symptom that the phone has been hacked or jailbroken. Has it?

Maybe you are looking for

  • Session State in Report Queries

    Hi all, I've got a report query with XML Structure set to advanced. I added two items to session state - a "department name", and a "current date" - these are application items that I want to put in the page header of my report template. After I load

  • Tooltip for each series of Business Graph in webdynpro

    Hi Experts,     Here In the Business Graph of webdynpro, on x-axis am taking sales order&corresponding purchase orders on each day and in the y-axis am taking Prices...Iam able to display successfully,Here the requirement is whenever the user place o

  • Cannot connect to imaging server after ZDML SP1 IR3 install

    OK, here's a bit of an odd problem... well, actually, I hope it's an insanely easy problem that I just have overlooked a simple solution for. I guess that's for you guys to help figure out. ;) We had been running Zenworks 7.0.1.0 on an OES1 Linux ser

  • Dynamic type conversion?

    Hi everyone, I'm working in a XML method invocation engine but at this moment I'm stucked trying to solve a little problem. I've a XML file looking this way: <method class="java.lang.Math" name="min"> <arg> <method class="java.lang.Math" name="max">

  • Why Does Copy And Paste In Premiere Pro perform so poorly?

    Please explain why you can't copy and paste footage (audio and/or video) into a chosen track on a sequence? It almost always pastes into a track with footage already there overlapping footage. It can't paste into a new track??? I thought this is simp