?segment n field for VBKD-INCO1 from ORDERS05

Hi,
I was trying to find the corresponding segment and field for VBKD-INCO1 [Incoterms (part 1)] from ORDERS05 idoc.
Please help me in this regard.
Message was edited by:
        Ramesh Kumar

Hello,
Check segment
E1EDK17 ->qualf ->001 for incoterms part 1(header lever)
E1EDP17-> Qualf->001(item level)
Thanks,

Similar Messages

  • Finding the related field for "Leave Type"  from the BI content in HR modul

    Hi good after-noon!!
    Can any one help me out in finding the related field for "Leave Type"  from the BI content in HR module?
    Regards,
    Suman.

    Hi Suman ,
       U can get the information in KTART field in PA2006 table in SAP. This field can take values like annual leave type, long service leave, study leave etc....
    Regards
    vamsi

  • Required fields for Purchase Order through ORDERS05 idoc

    Hi,
    I'm creating PURCHASE orders from ORDERS05 IDOC through XI. Could anyone tell me what all segments and fields are required for this purpose, if they have done this earlier.
    Regards,
    Vijay

    Hi Vijay,
    It depends how the input is populated. Anyway to know about Mandatory Segment /Fields, you can go to Transaction code WE30 in the R/3 system and give the idoc name and open the structure. There you can get to know about Mandatory Segments/fields etc with the help of Occurences
    Regards,
    Moorthy

  • Populate customer reference field for credit memo from RMA order

    There is requirement to populate customer reference field  for credit memo generated for RMA order..
    In RMA order which filed i need to populate which will come as customer reference in credit memo.
    Please help me  to populate customer reference field from RMA orderes

    Hi Javier,
    Please check following site:
    http://help.sap.com/saphelp_crm60/helpdata/en/2e/b0da18dbe84ed9bdff9a5d6d91f531/frameset.htm
    Cheers,
    Gun.

  • CREMAS03 Segment and field for LANGUAGE ?

    Hi,
    Please advise what is the segment and field name for Language in IDOC CREMAS03 (Creation Vendor Master).
    Thank You and Best Regards
    Fernand

    Hello Fernand,
    look for data element SPRAS, you will find in several segments (e.g. E1LFA1M-SPRAS, E1LFA1H-TDSPRAS).
    Best Regards, Dirk

  • Need segment & field from ORDERS05

    Hi,
    I was trying to find the corresponding segment and field for VBKD-INCO1 [Incoterms (part 1)] from ORDERS05 idoc.
    Please help me in this regard.

    Hi Ramesh,
    Please check segment E1EDK17-LKOND  with QUALF = '001'.
    Regards,
    Ferry Lianto

  • Additional fields for line item display for Vendor Accounts

    Hi,
    The additional fields for line item display have been defined for the vendor accounts. I am able to see the additional fields in SAP 4.7 system but not in ECC 6.0.
    Could you help me to know how the same will be displayed in ECC 6.0 system.
    Thanks

    In SPRO, Vendor Accounts -> Line Items -> Display Line Items -> Define Additional fields for Line item display, the fields for Check number from (PAYR-CHECF) and Tax Jurisdiction (BSEG-TXJCD) have been defined.
    When I am executing Vendor Line Item display (FBL1N), I am not able to select these fields for defining a layout. Could you please let me know, how I will get these fields in FBL1N.
    Thanks

  • IDOC segment for VBKD-BSTKD_E

    Hi,
    I am using ORDERS04 as basic type for order creation from iDOC.
    For one of my requirment I need the iDOC segment for VBKD-BSTKD_E field. The field is in purchase order data at header > Ship to party view > Purchase order no.
    Thanks
    Sanjay

    Hi,
    you have to fill the segment E1EDK02 with:
    E1EDK02-QUALF (qualifier) = '044' (purchase order number consignee)
    E1EDK02-BELNR = Purchase Order Number
    E1EDk02-DATUM = Purchase Order Date
    Kind Regards.
    Andrea

  • 808 FIELD SEGMENT IS A REQUIRED FIELD FOR G/L ACCOUNT SR01 800002-ME81L

    HI,
    While doing the service entry sheet in ME81L,The service entry sheet status changes to u201Cwill be acceptedu201D from red to yellow.
    but when i saving the document ,s/m giving me following message
    808 FIELD SEGMENT IS A REQUIRED FIELD FOR G/L ACCOUNT SR01 800002

    Hi,
    Check on it, Hope it will help you:-
    Re: Costing objecct is reqd
    Re: 808 Field Prof.Segmt
    pherasath

  • Field Segment is a required field for G/L account

    Hi Friends,
    Could some one help me out in solving the below issue.
    I am getting the below error message while running the depreciation run.
    "Field Segment is a required field for G/L account EM01 480000
    Message no. F5808
    Diagnosis
    The value for field "Segment" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "480000" in company code "EM01" linked to the field selection for posting key "40".
    System Response
    Error
    Procedure
    It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Segment". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.
    Please let me know,how can i fix this.
    Thanks,
    Diwakar
    Moderator: Please, search SDN

    Please check the field status group assigned to your GL account 480000 (Transaction FS00 > Interest/ Bank Details tab.) and then check the field status in transaction OBC4 for this field status group for the field Segment.
    Also check the field status  of your posting key in OB41.
    Regards,
    SDNer

  • Replicating Custom Fields for Products in CRM  from ECC

    Hi All,
    I am having difficulty in replicating SAP standard field values from ECC to custom fields for products in CRM. This is what i did:
    1. I created a new settype(ZMASTER_INFO) with a single attribute(ZIND_STD) and added
        this new settype to MAT_HAWA. (As all our materials fall under this material type).
    2. I am looking to map SAP standard field from ECC to this custom field of mine.
        I wrote the code in CRM BADI 
        'ZPRODUCT_CUSTOMER2->MAP_R3_TO_CRM_MATERIAL' with the following code:
    DATA: ls_ZMASTER_INFO TYPE ZMASTER_INFO_maintain.
    DATA: ls_category_bdoc       TYPE COMT_PROD_CAT_REL_MAINTAIN,
          ls_category            TYPE COMT_PROD_CAT_REL,
          lt_categories          TYPE COMT_PROD_CAT_REL_TAB,
          ls_settype             TYPE COMT_settype_ext,
          ls_cat_settype_rel     TYPE COMT_CAT_FRAG_REL,
          lt_cat_settype_rel     TYPE COMT_CAT_FRAG_REL_TAB,
          lt_cat_settype_rel_all TYPE COMT_CAT_FRAG_REL_TAB.
    LOOP AT lt_cat_settype_rel_all INTO ls_cat_settype_rel.
          CALL FUNCTION 'COM_SETTYPE_READ_SINGLE'
            EXPORTING
              IV_SETTYPE_GUID         = ls_cat_settype_rel-frgtype_guid
            IMPORTING
              ES_SETTYPE              = ls_settype
           EXCEPTIONS
             NOT_FOUND               = 1
             NO_IMPORT_VALUES        = 2
             NO_TEXT_FOUND           = 3 .
          IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
      CASE ls_settype-frgtype_id.
          WHEN 'ZMASTER_INFO'.
          ls_ZMASTER_INFO-relation-owner = 'X'.
          ls_ZMASTER_INFO-relation-logsys = cs_product_bdoc-header-com_product-logsys.
          ls_ZMASTER_INFO-data-ZZ0010 = is_mara-STD_DESCR.
          ls_ZMASTER_INFO-DATA_X-ZZ0010 = 'X'.
          APPEND ls_ZMASTER_INFO TO cs_product_bdoc-data-ZMASTER_INFO.
          APPEND ls_settype-FRGTYPE_GUID TO cs_product_bdoc-data-MNT_SETTYPE.
       ENDCASE.
    ENDLOOP.
    Since in ECC i am not having any custom fields i did not write any code in ECC for TPS34 and TBE24. I just wrote this BADI in CRM and using the field S_MARA-STD_DESCR.
    I am not sure if i need to write the code in ECC. COUld anyone please confirm if i need the code in ECC?
    Also in the CRM BADI, lt_cat_settype_rel_all is EMPTY. Not sure how this gets its value.
    Could anyone please suggest if i am missing anything here? Any help is appreciated.
    Thanks,
    Karuna.

    Hi Karuna,
    One more solution is to change the BDoc data content before it hit the Database.
    this can be done in badi: Data_Exchange_badi (if u dont find this try with following search string: xchange)
    In the above mention badi you will find a method which is used to populated the contend jst after bdoc in CRM is being populated by R/3 data.
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>

  • Read Combination segments for material account from item level

    Dear Value Consultant,
    Read Combination segments for material account from item level
    "For any inventory transactions"
    Is there is away to read the material account from item level , to affect the real combination segments not general combinations segments from item master or organization
    Business Impacts :
    All inventory transaction for all item will affect the same combination segments for material accounts
    After I transfer to GL, This not helps me to differentiate the balance for material value is related to any item category
    Also for Budget Wise , I want to map the budget on combination level for materials accounts , and this not actualize without affect the real combination for material accounts in subledger ,
    Thanks

    I have not seen any client asking for this, but you can consider Costing Hooks to create your own accounting engine for inventory transactions. Hope you are taalking about standard costing. In such case, costing hooks are available in Oracle for you to write your own accounting.
    Even better in R12, you can do this with setup in SLA.
    Thanks
    Nagamohan

  • BDC for Uploading data from XL sheet with unknown order of fields

    Hi SAP Gurus,
    My requirement is as follows,
    A BDC is to be developed for uploading data from an XL sheet, but the problem here is , the order of fileds in the sheet can be changed .
    ie,  for example the fields in the XL sheet are :-
      matnr    maktx   menge  amount
    but the user can give as
      matnr  amount  menge  maktx
      or
    maktx   matnr  amount  menge
    how i can solve this problem.
    Thanks and Regards,
    pavan.

    Hi Pavan,
    You need to handle it by your self, you can create a dynamic table based on the file value.
    The field name pass from file with the record as a header, and based on the header name create your dynamic table.
    afterward you can pass your value to BDC.
    for creating dynamic table you can use this method
    call method cl_alv_table_create=>create_dynamic_table
      exporting
       i_style_table             =
        it_fieldcatalog           = it_field[]
       i_length_in_byte          =
      importing
        ep_table                  = dyn_tab
       e_style_fname             =
      exceptions
        generate_subpool_dir_full = 1
        others                    = 2
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
                 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    -Dhirendra

  • IPhone contacts, Country field, keeps Syncmyride  Navigation from  giving directions.  Is there a way to leave Country field blank?  Thanks for any help.  JW

    iPhone contacts, Country field, keeps Syncmyride  Navigation from  giving directions.  Is there a way to leave Country field blank?  Thanks for any help.  Jww

    Syncmyride. That's what's having the problem. If it were handing the data properly, it wouldn't be a problem. You should not have to remove data from your contacts in order for an app that is accessing the contact data to work correctly. This is a bug in syncmyride. It has nothing to do with iCloud or anything else that Apple controls.

  • Regarding mandatory IDOC segments and fields!

    Hello all,
    I am working with an IDOC interface (material price change). IDOC type is MATERIALVALUATION_PRICECHANG01.
    When we go to WE60 for this IDOC type, SAP has marked all segments as optional for some reason. But I am trying to figure out which fields are mandatory as per the configuration. From my previous post I came to know that it depends on material types, how they are configured as an example.
    I am determining valuation area from a lookup table, but how can I determine valuation type? I am talking abt segment E1MATERIALVALUATION_PRICECH.
    However, the segment E1BP_MATVAL_PRICEDATE is marked as optional in SAP. Can I know whether those segment fields are required or optional based on the configuration setting in our R/3 system.
    Thanks,

    Hi,
    U can check in WE60 transaction code where u have to specify the basictype ORDERS05 AND THEN CLICK ON HTML FORMAT BUTTON..Now u can see the documentation of the idoc...
    Regards,
    Nagaraj

Maybe you are looking for