"Segment Version could not be read" Error in IDX2
Hi All,
I did one File-IDOC Scenario. But now there is a change in IDOC Structure. A extra segmetn is added. Now i reimported the definition in Design and made changes accordingly.
But while trying to import the idoc in IDX2 i m getting a error that segment version could not be found.
What might be the reason for this. Do i need to do any changes in the Channel Definition or Is it a Error in R/3 side?
Check if new segment is released in R/3 system ..
Go to transaction WE30 on R/3. Give your IDoc type..double click to new created segment>segment editor> there see if Released check box is check..
As you are saying new seg is reimported in IDoc then the segment must be released ..
Similar Messages
-
[SOLVED] Pacman "config file could not be read" error during Arch ins
I've been attempting to get Arch setup for a while now, and after having some trouble with partitions, my wireless connecting, and setting up repos and mirrors, which the Wiki helped me solve, I've hit a bigger bump. While updating the system using pacman as the Beginners Guide says to do, I get errors when I try to continue the update process as follows :
btw: I'm typing this on a laptop next to my computer
[root@McArch~]# pacman -Syu
error: config file /etc/pacman.d/core could not be read
error: config file /etc/pacman.d/extra could not be read
error: config file /etc/pacman.d/community could not be read
:: Synchronizing package databases . . .
error: failed to updated core (unexpected error)
error: failed to updated extra (unexpected error)
error: failed to updated community (unexpected error)
error: failed to synchronize any databases
Any tips as to whats going on? I've tried to created said files, and even insert mirrors into the file, like in the /etc/pacman.d/mirrorlist file but this doesn't seem to help
Last edited by Windfinder (2008-09-29 20:43:29)Glad you got it working.
I'm not sure what happened in your install but I just finished using an old 2007.08 iso and pacman first starts out with /etc/pacman.d/core, etc/pacman.d/extra, /etc/pacman.d/community ... etc., but I never had your problem when I did the #pacman -Syu after initial install reboot. The pacman update removes the above mentioned repos and replaces them with a single /etc/pacman.d/mirrorlist. You must have messed up an initial config file somehow as I couldn't get the same errors you got. It looks like you had your /etc/pacman.conf file messed up somehow and when you pointed it to the mirrorlist it could finally work properly. I'll just include my /etc/pacman.conf file and /etc/pacman.d/mirrorlist so you can compare. NB* these are from my x86_64 so for 32 bit machines i686 would replace x86_64 in the files.
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl %u > %o
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#NoPassiveFtp
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# Testing is disabled by default. To enable, uncomment the following
# two lines. You can add preferred servers immediately after the header,
# and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
/etc/pacman.d/mirrorlist
# Arch Linux repository mirrorlist
# North America
# - United States
Server = http://mirror.neotuli.net/arch/$repo/os/x86_64
Server = http://holmes.umflint.edu/archlinux/$repo/os/x86_64
Server = http://archlinux.unixheads.org/$repo/os/x86_64
Server = ftp://ftp.archlinux.org/$repo/os/x86_64
Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/x86_64
Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/x86_64
Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/x86_64
Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/x86_64
Server = http://mirror.rit.edu/archlinux/$repo/os/x86_64
Server = http://mirror.umoss.org/archlinux/$repo/os/x86_64
# - Canada
Server = ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/@carch
Well it was an interesting way to kill 30+ minutes. -
Memory could not be read Error Fixed
At least 6 months ago, I noticed that every time I opened my
default page in Dreamweaver and closed it, Dreamweaver would crash.
I would get the famous Application Error, "The instruction at
"0x5ad71531" referenced memory at "0x00000014". The memory could
not be "read". Click OK to terminate the program."
What I figured out is that right about that time, I had
switched my default browser for viewing to Firefox Mozilla.
Today, while I was testing some things out, I noticed that
the Check Browser Support list, only had Internet Explorer and
Netscape.
After I added Firefox Mozilla to the list of browser to check
compatibility for, the problem disappeared.
Go figure.> At least 6 months ago, I noticed that every time I
opened my default page in
> Dreamweaver and closed it, Dreamweaver would crash. I
would get the famous
> Application Error, "The instruction at "0x5ad71531"
referenced memory at
> "0x00000014". The memory could not be "read". Click OK
to terminate the
> program."
>
> What I figured out is that right about that time, I had
switched my default
> browser for viewing to Firefox Mozilla.
>
> Today, while I was testing some things out, I noticed
that the Check Browser
> Support list, only had Internet Explorer and Netscape.
>
> After I added Firefox Mozilla to the list of browser to
check compatibility
> for, the problem disappeared.
Great detective work!
I can't seem to reproduce this problem. What version of DW do
you use?
Was Internet Explorer or Netscape defined as either Primary
or Secondary
browsers? Any other details to help me reproduce this so we
can fix it
if it's still in the code?
Thanks,
Randy -
Skype 7.0 memory could not be read error on shutdo...
Hello, yestarday I upgraded to Skype 7.0.0.100 and when I shutdown the computer, restart or log off I get this error message: The instruction at 0x60afedfe referenced memory at 0x069b26a0. The memory could not be read.
I mention that I unchecked the option to "play a sound when I sign out" and I disabled uPnP (as mentioned in other threads).
This issue is the result of a conflict with the Asus Xonar DG SI 7.1 audio card, but unchecking the option to "play a sound when I sign out" fixed the problem in the previous version 6.
The error doesn't generate any kind of information in the event viewer.
My OS: Win 8.1 Pro
Any suggestions?
Attachments:
DSC_2877.JPG 2784 KBGX is disabled since installing. I don't know what or who installed manycam but i will disable it and come with updates. Thank you, kind sir.
Later edit: OK Uninstalled manycam just changed the error code, but the error is still there. I attached the picture.
Attachments:
DSC_2877.JPG 2879 KB -
ITunes 7: "memory could not be read" error
I am running the latest version of iTunes 7 and sometimes get the following error message:
"Instruction at Ox5ad71331 referenced memory at 0x00000014. Memory could not be read"
This happens after iTunes crashes. The appearance of the crash is that the font will become very dark/bold and dark lines will appear around the cells of the library, then the program will crash.
Is this related to iTunes 7 or Multi-Plugin, which I use to make my media buttons on my laptop work with iTunes? I have no skinning options chosen.
Thanks.I uninstalled the Multi-plugin and haven't had the problem since, in fact, no crashes at all.
-
Memory could not be read error.
I keep getting the following error while using Form Designer 7:
The instruction at "0x022221b2" referenced memory at "0x0000001c". The memory could not be "read".
It happens, randomly, when doing a number of things:
inserting a static text area
moving a form field
resizing a static form field....
In other words, no one thing seems to be causing it. If anyone has any ideas on this one it would be most helpful. Right now it is a pain in the butt since I keep losing information everytime it crashes.Can't help with why but....<br /><br />If Designer crashes you can recover the last PDF that you previewed by going to C:\Documents and Settings\<username>\Local Settings\Temp and finding the most recent pdf with a name such as _12bs10afg3a40f3t7j.pdf. That should be the last version you Previewed.<br /><br />Rich Ruiz<br />Novanis
-
"ABC could not be saved, because the source file could not be read" error when downloading
Almost every time I download a file, the download gets to the end and then I get this error "<filename> could not be saved, because the source file could not be read", and then the download fails.
I checked my addons and they are not the problem. This doesn't happen when I try another Firefox profile. I tried several solutions offered in "http://kb.mozillazine.org/Unable_to_save_or_download_files" but they didn't help. It's not my antivirus.
I hate to start another profile because I have my current one just the way I like it.
Please help!You can check the file attributes of all the files in the Firefox Profile Folder to make sure that you have write permission.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
[SOLVED] "Superblock could not be read" error on install
I've been trying desperatly to install Arch Linux on my main computer but this error almost always shows up after 1 or two reboots (usually when I'm finished installing base system and about to install Xorg):
:: Checking Filesystems
/dev/sdc3:
The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternative superblock: e2fsck -b 8193 <device>
I installed Arch by following the install guide and choosing Auto-prepare partitioning where I chose EXT4 as FS for /home and / I believe, so Im guessing the filessytems are set-up properly.
I have no idea why this error keeps coming back reinstall after reinstall (with complete format of HD in each reinstall). First I thought the HD might have gone bad so I tried installing arch to another HD and the error still shows.
Sometimes if I reboot enough times the error doesn't show and sometimes it just doesn't go away, seems like it's kind of random.
The harddisk I am installing to is a 30GB IDE Maxtor harddisk (a couple of years old) and I also tried with a 40GB Seagate IDE harddisk both with no success. When I installed I had 2 other harddisks in my system; a 60GB OCZ agility SSD and a 640GB Wester Digital both on SATA channels, but they are unplugged now.
I'm really lost as what to do here, I love Arch Linux and have used it for some time on my laptop but I never had any kind of problems like this.
Here's output from 'fdisk -l' run from the "maintanence mode" I get into when the error shows "Give root password for maintenance".
I find it weird that Arch tells me the error is on "/dev/sdc3:" when my harddisk is /dev/sda (my other two harddisks are unplugged, but it shows the error both with and without them so I guess it doesnt matter):
fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104422 83 Linux
/dev/sda2 14 587 4610655 82 Linus swap /Solaris
/dev/sda3 588 1544 7687102+ 83 Linux
/dev/sda4 1545 3738 17623305 83 Linux
Regards,
John
Last edited by johnrl (2010-01-28 14:42:15)How many hard drives you have installed at the moment?
Atm I have 3 HDs installed; my Arch HD, my OCZ agility and my Western Digital.
Peasantoid wrote:
PirateJonno wrote:To find your UUID look in /dev/disk/by-uuid and use readlink to find the equivalent sdXX.
...or use `blkid`.
Thanks, I used blkid and set-up UUID in /etc/fstab and it seems to be working now.
Can anyone explain how come that the /dev/sdx assignments seems to be randomly distributed among my HDs on each reboot - is this normal? I tried using 'blkid' on a few reboots and noticed that the problem occured everytime the HD arch is installed on was NOT assigned to /dev/sdc, but when it was assigned to /dev/sdc (which was in fstab) it worked fine.
Isn't it weird that Arch seems to assign a different /dev/sdx number to each harddisk on reboots? I mean, if this is normal, why doesn't Arch use UUIDs by default? At first I thought the different /dev/sdx assignments was caused by changing boot order in the BIOS, but the assignments seem to change even when I don't enter the BIOS and just reboot without touching a thing - one reboot it works and one it doesn't (due to differnet /dev/sdx assignment to my Arch hd).
EDIT:
I found the answer to my question on http://wiki.archlinux.org/index.php/Per … ice_naming - Arch randomly assigns device nodes so it seems the UUID fix is the way to avoid unbootable systems.
Is it possible to make Arch use UUIDs in the install so I don't have to configure it manually afterwards? (Why doesn't it use UUIDs by default?)
Thanks for the answers,
John
Last edited by johnrl (2010-01-27 15:20:12) -
firefox.exe - Application Error
The instruction at 0x100072b8 referenced memory at 0x100072b8. The memory could not be read.
Click on OK to terminate the program
Click on CANCEL to debug the program
Either of the above options terminates Mozilla - neither option fixes the problem - however Mozilla works as long as the error message remains on the desktop.We cannot know. You are not offering any system information nor actually telling what program you use and what you do when the crash occurs.
Mylenium -
Reports 3.0 "Memory could not be read" error
If the object referenced by a trigger is deleted without also deleting the trigger itself the following error message appears when attempting to access or delete the trigger:
R30DES32.EXE - Application Error
The instruction at "0x649e401e" referenced memory at "0x00000402". The memory
could not be "read".
Click on OK to terminate the application
Click on CANCEL to debug the application
<<OK>> <<Cancel>>
Clicking either button terminates the session.
How can I get rid of a trigger in this situation when to highlight it and press the delete key only results in needing to restart Reports?
TIA,
Dan Wilterding
[email protected] (aging e-dress, soon to go away)
[email protected] (newer, faster, shinier e-dress with better mpg)GX is disabled since installing. I don't know what or who installed manycam but i will disable it and come with updates. Thank you, kind sir.
Later edit: OK Uninstalled manycam just changed the error code, but the error is still there. I attached the picture.
Attachments:
DSC_2877.JPG 2879 KB -
Referenced memory could not be read - error
Hey, In an application on stop command, I exit from labivew on exit I get an error the referenced memory could not be read click ok to terminate program can any one suggest why this error is seen
how this can be resolved?
enclosed a screen shot of error
Regards
anil
Attachments:
error log.PNG 6 KBHi AndreasC,
This error message occurs when LabVIEW memory space goes corrupt and is often due a DLL or CIN code.
There can be two reasons for this:
1. Try removing all DLL calls in your code and see if it works. Most of the time, the corruption is traced to a call to a DLL function that has incorrectly passed inputs to the Call Library Function node, often by passing an uninitialized string or array, or by writing past the bounds of the string or array in the DLL function. Some DLL functions assume that a string buffer is presized to 256 bytes, 1 KB, or some other size. If a smaller sized string buffer is passed, the DLL can write past the buffer and corrupt the dataspace that follows.
2. This error can also be caused when running a LabVIEW built executable. If the VI calls a WinAPI DLL function and uses the full path to the DLL in the Call Library Function Node, the LabVIEW Application Builder will create a copy of the DLL in the data directory of the executable. Some DLLs such as WinAPI DLLs should only reside in one location, such as C:\WINDOWS\system32, otherwise errors/crashes can occur when called. To prevent this, remove the DLL path in the Call Library Function Node when calling WinAPI DLLs.
Some users have faced similar problems and the above solutions have worked for them.
Here are the links to those discussions:
http://forums.ni.com/ni/board/message?board.id=170&message.id=67230&requireLogin=False
http://forums.ni.com/ni/board/message?board.id=170&thread.id=229434&view=by_date_ascending&page=1
Regards,
Ujjval -
SQL version could not be verified error while installing the SCOM 2012 R2 reporting component
I have the below SCOM server roles in my SCOM 2012 R2 set up
1) All servers with Windows Server 2008 R2 SP1, MS - SCOM1, DB & DW - DB1, Reporting Server - DB2
2) All the DB servers with SQL 2012 SP1
3) Windows firewall is turned off on all the servers.
4) Success fully installed all the components except SCOM reporting.
While installing the SCOM 2012 R2 reporting component on DB2 ( Iam running this set up on the server where I instllaed the SQL DB engine and reportin services in Native mode. Configured the SQL reporting database and reporting URLs successfully in SQL reporting
configuration manager) getting the below error in the Rporting server instance page. Kindly advise.
I ran mofcomp.exe and there is no firewall restrictions. My account also has DB owner & sysadmin permissions.
Also tried re installing the SQL on Reporting server.
"The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
Configurations document for further information".Hi,
As far as I know, after installing SSRS, we don't need to configure the database and reporting URLs manully. When we install the reporting service for SCOM, it will configure those automatically.
If possible, you may re-install SSRS and then install SCOM reporting service.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Backup discs could not be read error occurred (-50). HELP!
I'm using itunes 9.0.2; running Windows XP on Oracle Virtual Box in Ubuntu 10.04. the latest itunes will not work and 9.0.2 is the closest i can get.
One out of 4 backup discs contains only the itunes purchases and it works but a message pops up: +'could not restore some of the files from the play-list'+, +'they may be on other backup discs'+ even though all the songs on disc play. I put the next disc in and the following message pops up: +'the disc cannot be read. an unknown error occurred (-50)'.+
Any ideas why this is happening? I loaded the discs in the latest itunes on another PC and it is fine. would it be that I may be using an older itunes then when i backed up the other discs and so not compatible? is that possible??
Any help on how to get all my music back on would be great!!Let's get you to SP 6 for CR XI r2:
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
Then I'd like you to see if you can duplicate the issue with one of our sample from here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
vbnet_win_export.zip will probably be the best sample to use.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup -
Illustrator CS error : "The memory could not be "read""
Hi,
If i close the Adobe illustrator CS in my pc(Windows XP). "The instruction at "0*00341469" referenced memory at "0*00000000". The memory could not be
"read"", error displayed. If i click ok, then only the illustrator closed. Could you please advice me how to solve this error.
Regards,
Maria Prabudass EPossibly a bad font.
check
The memory could not be... -
Memory could not be read Distiller
I'm getting a memory could not be read error whenever i try to print to PDF.
The error shows when the distiller loader is at creating fonttables.
Tried opening Distiller directly but gives the same issue,
I'm not able to open the Distiller program cause it will go to the error while startup is loading (again the error comes up when it's creating fonttables)
Tried sofar:
Reinstalling Adobe PDF and Distiller. (after full removal)
Running in safe mode.
Looking on google for the answer (countless hours of searching without a working solution)
printing a file without any special fonts to no avail.
Please any help to resolve this issue would be much appreiciated.Do you have a lot of extra fonts installed on your system? In the past there have been problems with huge numbers of fonts. Also, what version of Acrobat are you using and on what OS?
Maybe you are looking for
-
Upgrade install to 10.5 Mail problems solution
Ok, I am posting this after 2 days of research why Mail behaves crazily after I installed 10.5 via update. I tried archive and install as well with same Mail problems resulting. Now maybe this wont work for everybody, but it solved all my problems li
-
Error message R6034 and Error 7 (windows error) 1114
Hi! I have tried installing the latest itunes update and it has failed. I get the runtime error message R6034 and Error 7 (windows error) 1114. I have tried many times, uninstalling and reinstalling the versions as advised in some of the related thre
-
Numbers: how do I turn on the feature that fills the cell with typing. In the previous versions, I could type a name or word and then a list of names/words with the same letters would appear. I could choose the name/word to enter into the cell. This
-
New Socket() acting strangely under Windows
Hello, First a little background: I have a client application that connects to a server application through a socket. The client first checks to see the server is 'reachable' using the .isReachable() method. If this return true, all is good. If it re
-
I just received a hand-me-down Palm TX from my daughter. She passes her Palm PDAs on to me since I am on Social Security and can't afford a new one. The battery was dead since it had not been used for some time. Plugged it in and charged it for ab