Segmentation and Target groups

Hi,
Is there a way to create sub-sets of Target Groups so that whenever users run a campaign, the system does not have to go back todatabase tables to filter data, but it is done in sub-sests only to enhance system performance.
Regards,
Monica

Hi Pooja,
which version of the product do you use? CRM 2007?
Scenario 1) I need to combine 2 profiles with an 'OR' condition and create target groups out of the combined profile. How do I accomplish this? Is there any method to combine profiles in the Graphic Modeler?
=> You could have 2 profiles in a profileset and create the target group for the complete profileset. Then the results are "OR combined".
=> Alternatively you can create a new profile which consists of all attributes and create a target group for this profile.
Scenario 2) If we have 2 profiles and a target group in a profile set how do I create a Target Group for all the BP's in the Profile set. The only selection criteria in the Graphic Modeller for me right now is Attribute lists. How do I select Target Groups and Profiles
=> Just create the target group for the complete profile set, then one consolidated target group is created.
Does this help?
Regards, Guido.

Similar Messages

Combine Profiles and Target Groups -Segmentation

Hi Experts,
I have a requirement where I will need to join profiles with other profiles and Target groups. I checked in help.sap and I saw the following sentence regarding combining the profiles.
In addition to attributes, you can also combine profiles with other profiles and with target groups.
Example
You select a profile from the components area, drag it onto an existing profile in the staging area and choose keep. The resulting profile contains the attributes contained in both profiles as inclusive conditions.
How do I get the Profiles and the Target groups in the Components area? I can only view the existing Attribute lists. Is there any setting that I have to make to see the existing profiles and target groups ?
Any help will be greatly appreciated.

Hi Pooja,
which version of the product do you use? CRM 2007?
Scenario 1) I need to combine 2 profiles with an 'OR' condition and create target groups out of the combined profile. How do I accomplish this? Is there any method to combine profiles in the Graphic Modeler?
=> You could have 2 profiles in a profileset and create the target group for the complete profileset. Then the results are "OR combined".
=> Alternatively you can create a new profile which consists of all attributes and create a target group for this profile.
Scenario 2) If we have 2 profiles and a target group in a profile set how do I create a Target Group for all the BP's in the Profile set. The only selection criteria in the Graphic Modeller for me right now is Attribute lists. How do I select Target Groups and Profiles
=> Just create the target group for the complete profile set, then one consolidated target group is created.
Does this help?
Regards, Guido.

View List of BP's in Segmentation Basis and Target Groups

Hi Experts,
We are using Segmentation Basis for Segmentation. When I create the Segmentation Basis using WINGUI I see that the list of Business partners in the Segmentation Basis is around 15,000 but I can view only 100 of them in the List output. Is there any other way where I can see all the BP's that are assigned to a Segmentation Basis/Master group.
I have a similar issue with the Target Group members in a Target group. The Target Group to file export will save the file to an application server to which all the users will not access . Is there any alternate method to view all the BP's in a Target group other than the file export to the application server.
Please Help.
Regards,
Pooja

Hi Pooja
I have the same problem with segmentation basis.
I have created a segementation basis for certain number of targetgroup example: 500 members
When i am trying to create a new profile set by selelecting the created segementation basis , no target group was displayed and it is showing as Zero. but the target group is displaying in SAP GUI.
Is anything i am missing , can you please let me know the steps for segementation basis procedure and how we can use them for further segementation.
Thanks
shashi

Change Management and Target Group in STMS

Hello, We use the Change Management (SolMan 4.0). Up to now it works fine. We deliver always one client in the System (E33.002; T33.002 and P33.002). Now we try to change this. We will deliver more than one client in every system at the same time (to have always the same status in every client). So we use Target groups in STMS. This works fine if I do the transports manualy. But if I try to do it with the change management it doesn't work. The change management still deliver one client (002).
Can someone give me a hint?
Best regards

Hi Jose,
check below link.
Leads not getting created via ELM
Rgds
Hari

Transport Layers and Target Groups

Hello,
Can one transport layer be assigned to two different target groups? We have some number range changes that are automatically trying to go to our FIX_QAX target group since it is config, however, the transport cannot be generated because the config is part of package KEG0 which is set up currently as part of the SAP layer which only handles the FIX_IND target group. I was thinking of making the SAP layer go to both target groups FIX_QAX & FIX_IND. Is there any danger of this?
Thank you for your time,
Erin Byrne

i think we can't assing a transport layer to 2 different target groups. and, even connection b/n 2 target groups is not possible. i am not sure, if we can use the same transport layer (SAP) twice.
the alternative way is.. manually (copy the data file and cofile in the other tranport domain) import the request.
hope this info helps.
regards,
Rajesh.
pls, award points

Campaigns and Target Groups

I'm trying to extract information about target groups and related campaigns to BW from CRM. I was initally looking at 0CRM_TGBPCT but this was extracting only one record and I found an associated OSS note (No 717539) to it recommending the use of another datasource called 0CRM_CONTACT_OUT. I tried using this datasource but when I test it even in CRM (RSA3) it says 0 records. I know data is in there though.
Would someone be able to shed some light on this and be able to give me any tips on the same.
Thanks !!!!

Hi to all,
I've the same problem when load data with datasource 0CRM_TGBPCT.
If I extract from RSA3 retrive the correct data but if I extract directly from BW the system load only 1 record!!!
please anyone help me?
P.S.: The remote user for the connection have already SAPALL authorization!

CHaRM - Target group and Virtual System

Hi,
Could anyone let me know if Virtual System and target groups could be used with CHaRM?
Current set up with three systems/clients works fine, however, for a new project with active STMS version with target group and virtual system, even the task list is unable to be created.
Can you please help?
Regards

Hi,
As far as i know, you can't use virtual system for ChaRM.
Regards,
Sanjai

Target groups in Marketing....Urgent

Hi,
I have created a Profile set and Target groups in the profile set. i have executed the campaign for that.
My Question, is can i add the target group created earlier to the another profile set, if so How?
I am in urgent need of documentation of the same.
Regards
Yaswanth.k

Please read carefully the rules regarding target groups in CRM Segment Builder:
-A target group can exist without reference to a profile. If so, it must however reference a profile set ("lies in profile set..") or as a subset, if present ("is attached to profile set ...").
-If a target group is created with the profile set reference "is attached to" (that is, to a subset), it will have the status "active"; and any available target groups of the profile of the subset will be set to "inactive".
-A target group with profile reference always has a set reference ("lies in profile set ..").
-A target group with profile reference cannot be attached directly to a profile set.
Within a profile set, a target group without profile reference is represented by an icon indicating a single target group.
-You cannot move target groups from one profile set to another, however you can copy existing target groups.
The documentation is available here:
http://help.sap.com/saphelp_crm50/helpdata/en/b6/ef0b3bcbe24b74e10000000a114084/frameset.htm
If by "add target group to another profile set" you mean to say "COPY target group to another profile set", then yes it is possible to do it.
As for the "how" ... please read the help again:
To copy a marketing segment, select the required segment in the staging area of the Segment Builder and choose either the Copy pushbutton or choose Copy Segments from the context menu. If no individual segments are selected, the entire profile set is copied.
You can choose whether the copied segments are created in a new profile set, an existing profile set, an existing subset, or in a new subset of an existing profile set.
http://help.sap.com/saphelp_crm50/helpdata/en/1c/611d429e66da2ce10000000a1550b0/frameset.htm
Hope this helps,
Rahul
PS. Please mark all helpful answers. If you question has been answered, please mark it as such so that the forum stays clean!

Atributes list to create target group does not appear

Hi experts,
In CRM Portal, It is not showing the page which I can choose Attributes list in order to create profile groups and target groups.
I'm looking for something similar as tcode: CRMD_MKTSEG in SAP GUI.
I have already assigned Marketing Manager/Assistant in my profile.
Does anybody could help me ?
regards,

Hi,
Assign Transaction category CRMD_MKTSEG to your user role for GUI as well as Portal(PCUI),
u'll see the Segment Builder tab in PCUI screen, u can create profile/sets and target groups.
Thanks,
Dipesh.

Automated campaign: Element only processing target groups

Hello,
I am using campaign templates to create automated campaigns. I tested all possibilities (setting a profile set to the campaign element, then setting a profile, and then a target group) and the execution only works with target groups. The worst part is that when the campaign is created he copies the target group from the profile set configured in the model to another profile set without name! That way is impossible to reuse it.
Please advice
Regards

Hello,
Thanks for your replies and sorry for not being clear.
I have a campaign template that is configured as follows for automated campaign execution:
The last screenshot is from the campaign element template, where the system only let me create a segment or target group and not reuse a profile group or target group, like in campaigns created without template.
I tried to add the profile set outside the campaign automation view, but when I create a campaign from the template, the system creates a copy from that profile set.
So the questions is:
Is there a way to reuse profile groups/target groups when using Campaign templates like in normal campaigns (using the profile groups/target groups from the template, not copying them)?
Thanks

Expand existing Target Group

Hi All,
I need help on Target Group for CRM Data Target in BW APD. I did a simple Analysis Process in APD, and put CRM as my Data Target. I choose the CRM as the data target and select CRM Target Group. However, on the Target Group tab, I can create Profile Set and Target Group, and data is transferred to CRM correctly. My question is, if I want to choose the Change Existing Profile Set and Expand Existing Target Group from the menu, they are grayed out and I can not choose anything. It doen not make sense that I have to create new Target Group everytime I run the Analysis Process.
I found the problem, the aleremote user must be defined as dialog instead of communications.
Thanks,
Ricky
Message was edited by: Ricky Amirudin

Hi Ravi,
to change the title dynamically, you need to redefine the Methode:
IF_BSP_WD_HISTORY_STATE_DESCR~GET_STATE_DESCRIPTION in your main component overview.
go through this code and modify as per your requirement.
DATA lv_bp_number TYPE string.
   DATA: lr_cucobupa    TYPE REF TO cl_crmcmp_b_cucobupa_impl.
   TRY .
       lr_cucobupa ?= get_custom_controller( if_iccmp_global_controller_con=>cucobp ).
     CATCH cx_sy_move_cast_error.
       RETURN.
   ENDTRY.
   description = cl_wd_utilities=>get_otr_text_by_alias( 'CRM_IC_APPL/IDENTIFY_CUSTOMER' ).
   IF lr_cucobupa->is_bp_search_done( ) EQ abap_true.
     lv_bp_number = lr_cucobupa->typed_context->customers->get_s_struct( attribute_path ='STRUCT.BP_NUMBER' component = 'BP_NUMBER') .
     IF lv_bp_number IS NOT INITIAL.
       CONCATENATE lv_bp_number ')' INTO lv_bp_number.
       CONCATENATE description '(ID:' lv_bp_number INTO description SEPARATED BY space.
     ENDIF.
   ENDIF.
Thanks & Regards,
Srinivas

One Profile set multiple profiles & target groups

Hi Experrts,
Can any one please tell me what is the advantage of creating multiple profiles and target groups under one profile set.
Any help will be greatly appreciated,
Thanks in advance
Regards
Suvitha

Hi,
Multiple TGs in a Profile set will be effective on the way you use them in the campaign.
In campaign, you can use either a TG or a Profile Set. If you are using PS, all the TGs in the PS will be used. Otherwise, you can use the TG individually. It depends on how you use it.
BR, Sathish R

CRM Target Groups and Product Segments - BW and BPS settings

Hi gurus,
I have some questions regarding the CRM Target Groups and Product Segments as it relates to BW and BPS planning layouts.
1. When a target group is created in CRM, is it supposed to also be create master data entry for the object 0TGGRP_ID in BW? If it is, what kind of settings need to be made to ensure that? When we create target groups in our CRM instance, we donu2019t see the master data being updated for the 0TGGRP_ID info object.
2. Where exactly (in BW) is the relationship between the target group and the underlying customer/business partners stored/updated? We have a requirement to use target groups for defining the trade promotions and still being able to explode and plan on (individual) customers in the embedded BPS Planning layout. I believe that we need to have target group and associated customer assignments stored somewhere (?) in BW and use BPS characteristic relationships to populate all the possible combinations for a target group ID being passed from CRM. Am I correct in my assumptions? Any ideas if SAP has already delivered something similar in the BPS business content for TPM?
3. We are planning to use product segments to define the trade promotions as well. I believe BW info object is 0CP_SEGMENT. Similar to what I mentioned in Question 1, I donu2019t see any master data being updated for 0CP_SEGMENT. Am I looking at a wrong BW object or missing some key settings?
4. Where is the relationship between a Product Segment and the associated products stored/updated in BW? How do I create a trade promotion using a product segment and make the BPS planning layout populate individual products in the lead column?
Thank you for your help

Hi Anna,
After reading your post, what i understand is that there is no existing relationship present in CRM system between the Org BP and the contact person BP.
As per my Knowledge in order to create a Target group with Contact Persons you should have an active relationship persent in the CRM system bewteen the BP and the Contact person.Now as your sceanrio suggests that the Contact person's are present in the BW system but not in CRM, i would assume that the relationship also exsits in the BW . So if it does then your BW team should be able to help you in creating the necessary infocube with there analytical tools and you can then use there cube as the datasource and create the necessary Target Group with Contact persons.
Comming to the second part of your question, your guess is absolutely right but to give you more detailed infomation , the BP ID is converted in a unique GUID and this is passed into the program to retrive the necessary information from the BP after the campaign is executed.
Hope this helps!!
Regards,
Naveen

Enhance output of Target Group opened in segment builder

Hello Experts,
We are implementing SAP CRM Lean Marketing using CRM 7.0. Our business requirement is to do segmentation based on Company attributes and Relationship Category. The output of the target group should enlist the persons related to the Company based on the relationship category selected while doing the segmentation.
Using standard InfoSet CORM_MKTTG_BP_ORG_CDE and while creating data source selecting BUT000_PER-PARTNER_GUID in the field business partner, we are able to get the list of persons matching the segmentation query (based on the relationship category e.g. Has Supplier, Has Contact Person, etc) . But the issue is , the output of the target group (shown as an ALV grid , when the target group is opened in segment builder) only enlists matching Persons, it does not enlist the related company ID /name in front of the Person ID in the output of the target group. And this Company BP ID is not available if I try to modify the output layout. So business is unable to understand the Person enlisted in TG belongs to which Company. Can we enhance this ALV grid output of the target group displayed in segment builder ? if yes , how can it be achieved ? If this is possible and we are able to add related company BP ID/ name in front of every person enlisted in the target group then our issue gets resolved. Or is there any alternative solution to resolve this issue ?
Highly appreciate your early response in order to resolve this critical issue.
Thanks and Regards
Ambar
Edited by: AMBAR ADHAV on Sep 10, 2011 11:52 AM
Edited by: AMBAR ADHAV on Sep 10, 2011 2:21 PM

Naresh,
Thanks for the response.
As per your suggestion I made additions to my z Infoset , and added all the fields you suggested.
While creating the data source I selected following fields
Business Partner: BUT000_PER-PARTNER_GUID (as my requirement is to return Persons and this field works with only GUID)
Reference Object: BUT051-RELNR
Reference Object Type: BUT051-RELTYP
Now when I create the target group with this data source unfortunately I am still not getting the the relationship number when I click in Show assigned Objects in the target group screen of web UI.
Please suggest where I am going wrong
Thanks
Ambar

Enhance output of Target Group in segment builder

Hello Experts,
We are implementing SAP CRM Lean Marketing using CRM 7.0. Our business requirement is to do segmentation based on Company attributes and Relationship Category. The output of the target group should enlist the persons related to the Company based on the relationship category selected while doing the segmentation.
Using standard InfoSet CORM_MKTTG_BP_ORG_CDE and while creating data source selecting BUT000_PER-PARTNER_GUID in the field business partner, we are able to get the list of persons matching the segmentation query (based on the relationship category e.g. Has Supplier, Has Contact Person, etc) . But the issue is , the output of the target group (shown as an ALV grid , when the target group is opened in segment builder) only enlists matching Persons, it does not enlist the related company ID /name in front of the Person ID in the output of the target group. And this Company BP ID is not available if I try to modify the output layout. So business is unable to understand the Person enlisted in TG belongs to which Company. Can we enhance this ALV grid output of the target group displayed in segment builder ? if yes , how can it be achieved ? If this is possible and we are able to add related company BP ID/ name in front of every person enlisted in the target group then our issue gets resolved. Or is there any alternative solution to resolve this issue ?
Highly appreciate your early response in order to resolve this critical issue.
Thanks and Regards
Ambar
Edited by: AMBAR ADHAV on Sep 10, 2011 11:53 AM
Edited by: AMBAR ADHAV on Sep 10, 2011 2:22 PM

Hello Experts,
We tried implementing BADI CRM_MKTTG_SEG_MEM_EX in order to add Company ID/ Name , but the issue is the BADI gets Input as persons BP id, nothing else, due to this if a person is having relationships with multiple companies, the BADI is unable to identify which company to choose as Relationship Category is not available to the BADI. And further issue is if a Person is having same relationship category with 2 companies e.g. Supplier for company A and for Company B too , in this case too the BADI is unable identify correct Company to return to the target group output
Is there someting in the Infoset that can resolve our issue ? How can I make available the fields in the infoset to the ALV output of the target group. Using SQ02 I am able to add fields to the field groups for selection in segmentation, but can anyone guide, how to make the field available in the output list ?
Please provide your technical assistance
Thanks
Ambar

Segmentation and Target groups

Similar Messages

Maybe you are looking for