Segmentation G/l a/c determentation

Hai experts...,
Can any one help me  about G/l a/c determentation screen when we switch to segmentation a/c?
i know i do define Control a/c and i have one doubt wheather rawmaterial a/c we are using one in standard COA here based on segmentation it will n number inventory a/c's? how i can i map all these a/c?

This would depend on how you want to report the Revenue, COGS, Inventory
If you want the Revenue of each Item Group to be seperately report along with their COGS and Inventory asset then you would probably create a segment for each Item Group and create GL acocunt for each of the above for each segment.
This completely depends on your Clients requirement.  You should consultant with the Accounting department / Controller to discuss this.
Reliased Exchange Losses&Gains can be just one account for all segments
Suda

Similar Messages

  • Simulair report for FBL5N and FBL1N for new general ledger on segment level

    We are working with segments in new G/L ledger. We want to run a open item report where we can combine customers and vendors by segment. The vendors and customers are linked in the master data. In the "old"  reports FBL5N and FBL1N you can do this but not by segment.I found the following report on segment level:
    - S_PCO_36000218 - Receivables: Segment
    - S_PCO_36000219 - Payables: Segment
    What I'm missing is to run 1 report for Customers and vendors. What I'm missing to is that there are only some fields available on line item level. (I like to have invoice number, documentype,.......)
    Is there a standard report for this in new genaral leger?
    Is it possible to ad additional field to th list viewer.

    What is this user license type?  All financial transactions need professional license.
    Thanks,
    Gordon

  • Possible to segment traffic between 2 interfaces? And other questions...

    I would like to set my G5 up as a server utilizing a second connection and to keep traffic seperated between this server connection and my regular internet connection (would be wireless). I'm pretty sure this alone is fairly straightforward and can be accomplished by setting up the new interface and moving it down to the bottom of the connection list with wireless at the top. That should keep all non-specific traffic from flowing out the ethernet/server connection - I think.
    If the above works the way I stated then I would also want to firewall ONLY the ethernet/server connection (the wireless has it's own hardware firewall). AND - this is the tricky part - I also want to add a fake interface that has a fake IP and bind that to the "real" ethernet/server connection. The reason for that is because I need a static IP to bind the service to. I know if the connection list thing works to flow the traffic that if I had an external router on the server connection, this wouldn't be needed. I'd already have a fake IP to bind to and I wouldn't have to run the firewall on the Mac. But I don't and I'd rather not have to buy one.
    So can this be done through the network/sharing preferance panes? If so, are there any "gotchas" I should be aware of? If not, is there any software tool out there that would make setting this up easier/faster? I'm not opposed to doing it all via command line, but I'm a bit rusty with my linux/unix admin knowledge. Plus I'm not 100% certain how to set all that up command line wise without screwing up OS X!
    Thanks.

    I'm not sure I fully understand what you are attempting to accomplish. Lets see if I have the general idea.
    You have a single G5, that you want to use as both your desktop machine and also to provided specific services, such as web, email, etc.
    You have some type of hardware firewall/security appliance.
    You have some type of wireless access point.
    You don't seem to have any type of router or switch in your configuration.
    You want all of your server based traffic to be sent and received on it's own Ethernet port. You want your personal Internet traffic to be sent and received on your wireless connection.
    So my questions are:
    Where is the server traffic going to, coming from? Who is accessing the server, is it users on the Internet, or just computers on your own LAN (which you didn't mention).
    If your server is to allow data from or send to the Internet, then you need to have a way to route the traffic there. Do you have more then one method to access the Internet, or will all traffic, both personal and server being going though the same Internet access pipe?
    If it is all going through the same pipe, and you only have the single computer, I don't understand why you wish to segment the traffic.
    If on the other hand you have multiple computers on your LAN. then segmenting traffic may make sense. This would allow access to your server and keep your LAN well secure.
    Anyway, to get to specifics, you'll need to use the terminal app to bind specific services to specific IP's and ports on your Mac. You will also need to manually configure the firewall to be able to select specific connection ports and bindings. However, while I think it can be done, I'm not sure it makes a great deal of sense.
    I would be more inclined to suggest a router or switch that can provide VLAN support, or a router that provides true DMZ support, would be a good way to go.
    Anyway, a little more info would be helpful.
    Oh and if I have this totally worng in what I think your doing.. My mistake.
    Tom N.

  • Remote system CCMS segment not in local segments

    Hi,
    I have configured CCMS agents before but this one is puzzling.
    - downloaded latest CCMS agents sar file for PI systems
    - I have created the csmconf file and placed in the right locations.
    - i started the CCMS agent for PI systems from Visual Admin and it found the csmconf file, i provided the passwords and it  started but the segment name is not in "local segments" in RZ21 in SOlMan (Monitoring: Display technical topology) and therefore i am limited to what i can see in RZ20.
    - i unregistered the agent and started it at OS level with the -j2ee option and gave the passwords and it still did not come under "local segments".
    - the PI systems have remote Databases from which i started the CCMS agents and they do appear under "local segments" and can see them in RZ20.
    - their respective CCMS agent are visible under the PI system's RZ21 "local segments" but as far as i remember from the OS level i did not configure it to register itself with PI itself but only with the CEN which is SolMan.
    in my other solman systems the remote PI CCMS agents and amongst others are all under "local segments" and they all visible in RZ20.
    I want to register the agents for the PI systems so that they appear under the "local segments" tab in solman and i can carry out my monitoring but they do not.
    has anyone else had this problem?
    Thanks,
    Mani

    Hi,
    Please see if these threads help.
    API to load images for
    API to load images for
    Employee Photo Upload in HRMS
    Employee Photo Upload in HRMS
    Dispay employee pictures in Employee Self Service screen
    Dispay employee pictures in Employee Self Service  screen
    Regards,
    Hussein

  • Error while adding a new field to the Segment in we31

    Hi ,
    I am getting error when i am trying to add the new field to the cust. segment.
    It is released for the adding the new fields i am cancelling the release , but i got a message like this
    Error while resetting release of segment 'segment name'.
    it is comming from the message class EA and message number 259.
    Thanks in advance.
    Reagrds,
    bharani

    Hi,
    Have you tried Cancelling the release before adding the version?
    Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
    Please let me know if it worked!
    Vijay

  • Error while resetting release of segment

    Hi Experts,
    We have one custom IDoc.I am trying to add new field to one of the segment.So i am trying to cancel release status of segment using we31.But i am getting error Error while resetting release of segment  ZXXXXX Message no. EA259 .I checked many of SDN threads but no where exact solution is mentioned for this.Current release for the message type is 701.so we are on same version now also.I put  a break-point in LEDIJF05 in form CHANGE_CLOSE_SEGDEF.i observed it is failing at line 625 and
    can not unclose segment: release of last version is not SAP-version*.Can any body tell me what is the exact issue.
    Thanks in advance,
    Vijay

    Hi Vijay,
    If the SAP version and the version segment released last time is the same, then this problem should not occur. If you are still facing the issue, add a version to the existing segment. You should be able to add the new field then.
    Regards,
    Parthiban

  • Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder

    Objective: Creation of a Marketing Profile Set based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset thru the WebUI Segment Builder.
    Problems: Standard CRM_MKTTG_BP_BIRTHDATE Infoset DOES NEVER RETURN ANY RESULTS on the segmentation builder of the WebUI client (no matter the filter you specify).
    Other cases:  However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (using the same filters as in the segmentation builder)! Of course the segmentation builder works with other attribute lists.
    NEW: IF WE DON’T ESPECIFY ANY SEGMENTATION BASE IN THE PROFILE GROUP, IT DOES RETURN RESULTS!!! (GO TO THE END OF THE DOCUMENT FOR DETAILS)
    Steps followed:
    Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE (Transaction SQ02).Review Data Reading Program code: do we have to change the standard code? We have only remove the "BREAK-POINT" statement.
    Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset (Transaction CRMD_MKTDS).
    Creation of an Attribute List based on that standard Data source and selection the Birth date as a filter in the Attribute list (Transaction CRMD_MKTDS).
    On the segment builder of the WebUI set any filter (Example: “TODAY”).
    Steps in detail:
    Review Standard Infoset CRM_MKTTG_BP_BIRTHDATE
    SQ02.
    (Image deleted)
    Review Data Reading Program code (Code attached)
    (Image deleted)
    Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
    Data source: Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation - Maintain Data Sources and Attribute Lists: CRMD_MKTDS
    Create Data Source
    (Image deleted)
    Infoset: CRM_MKTTG_BP_BIRTHDATE.
    Business Partner Field: CRMT_MKTTG_IS_BIRTHDATE-PARTNER_GUID
    (Image deleted)
    Result:
    (Image deleted)
    Attribute List
    Creation of the Attribute List
    (Image deleted)
    Assign Data Source:
    (Image deleted)
    Selection of the Birth date as a filter in the Attribute list:
    (Image deleted)
    Result:
    (Image deleted)
    Segment builder of the WebUI:
    Access to WebUI with marketing role.
    Create Segment:
    Creation of Profile Set
    Graphical modeler
    Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
    Example1: “today”
    Count target group. Here I would like to stand out that once you click on the “Count” option, immediately it shows 0 results. In other words, it doesn’t process any information. With other attribute lists it takes some time to process, no matter the filter or the attribute list you use. However if we create a new Data source with data "Extraction from Query" (transaction RS02) based on this standard CRM_MKTTG_BP_BIRTHDATE Infoset and we test the functionality using transaction RSA3, IT DOES RETURN RESULTS (with “today” filter and other)! So it seems that the problem has to do with the segment builder, not the Infoset.
    Result: it never return any results no matter the filter you specify.
    Other cases:
    Creation of a new Data source with data "Extraction from Query" where you enter the name of your new query
    Creation of a Data source based on the standard CRM_MKTTG_BP_BIRTHDATE Infoset
    Standard Infoset CRM_MKTTG_BP_BIRTHDATE:
    We fill the form and select “Extraction from Query”:
    Press SAVE and define which fields will be available for selection and which of them will be visible.
    RSA3: Extractor checker in order to test the Data source:
    We specify the Data source:
    IT DOES RETURN RESULTS:
    ALV Grid:
    NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados.
    Segment builder – Profile Set of the WebUISegmentation Basis: we leave it in blanc.
    Graphical modeler
    Create Filter: We have already tried many different filters (we already seen notes referring to this matter).
    Example1: “today”
    Count target group.
    Result: IT DOES RETURN RESULTS!!! àConclusion: the problem is the Segmentation Basis
    Define Segmentation Basis:
    Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Segmentation Basis.BS Usuarios Registrados:
    Define Reports for Creating Segmentation Bases
    Transaction: SPRO – Customer Relationship Management - Marketing – Segmentation – Classic Segmentation - Define Reports for Creating Segmentation BasesZMK_UTL_MGR_SITES_UREG
    Define Usage for Segments:
    Transacción: SPRO – Customer Relationship Management - Marketing – Segmentation – General Settings - Define Usage for Segments.ZBS_UR à02 Segmentatión Basis
    Attribute List:Category:
    There is no Category 02 Segmentatión Basis!!! Why?? Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???
    Usage ID
    NEW: It seems that it has to do with the Segmentation Basis selected in the creation of a Profile Set, because if we do not select any, it does return results. But we need to create this Profile Set based on a particular Segmentation Basis called BS Usuarios Registrados. Why is not posible to select Category 02 Segmentation Basis in the creation of the Attribute List???

    It seems that the standard Infoset doesn’t work by itself with Segmentation Basis. Two SAP notes have been applied and a new Field Group has been added to the Infoset (in order to distint the Segmentation Base).
    CRMT_MKTTG_IS_BIRTHDATE-MGRGUID
    1966298: MGR_GUID is not populated correctly to infoset read program
    2007687:Segmentation InfoSet queries saved with incorrect Master Group
    For that reason we had to create a new Infoset based on the standard CRMT_MKTTG_IS_BIRTHDATE, but adding this new Field MGRGUID to the Group Fields.
    Issue solved

  • Issue in creation of data from extended segment in background mode

    Dear all,
    I am facing an issue in creation of data in receiving system using IDOC for an xtended matmas segment(Extended for classification view in user exit).The issue is that the idoc is received successfully in r3eceiving system but not created successfuly in data base .(Though it is shown green/successful).When i execute this from we19 the data is created successfuly in data base.I will be thankful if you can guide me resolve issue.
    Thanks.

    Hello,
    you can use CALL TRANSFORMATION id, which will create a exact "print" of the ABAP data into the XML.
    If you need to change the structure of XML, you can alter your ABAP structure to match the requirements.
    Of course you can create your own XSLT but that is not that easy to describe and nobody will do that for you around here. If you would like to start with XSLT, you´d better start the search.
    Regards Otto

  • Variable Substitution - How do I use a segment atribute ?

    Hi all, I'm facing a problem with variable substitution in receiver comunication channel.
    I got the follow message:
    <?xml version="1.0" encoding="UTF-8"?>
    <lote nro="000262007">
        <etc>...</etc>
    </lote>
    I want to get atribute <b>nro</b> from segment lote to use in variable substitution, how can I do it?

    Variable sucstitution doesnt allow a way to achieve this.
    There could be some workarounds
    1. Use some dummy element in ur xml message with same value as tht of the attribute.
    2. Use adapter specific message attributes or dynamic file name functionality
    Regards,
    Prateek

  • To populate Segment data to Order item level in additional tab B

    Hi Experts,
    I am working on Inbound interface using IDoc (ORDERS05); during Idoc process IDOC_ORDERS_INPUT; i have to take segment value and need to populate at order items level; in custom field  (in additional tab B).
    For that i am using FM (Customer exits) :
      Step 1-  EXIT_SAPLVEDA_001 (Getting segment value and passing to XVBAP-Zfield).
      Step 2- EXIT_SAPLVEDA_002 (Passing Value to respective screen using BDCDATA table).
    Due to unable to find where i have to set flag and how ?;                                                                                To avoid multiple record to append ; BDCDATA Table with same screen.
    As mention in this link for Header level additional tab B : http://www.sapfans.com/forums/viewtopic.php?f=21&t=62945#p1025880.
    They are using my_flag to avoid ,issue as i mention in above step.
    Step 3 - At last they are deleting my_flag in FM : EXIT_SAPLVEDA_003. (find in above link)
    Thanks in Advance
    Regards
    Vinay

    you need to use a flag of type vbap-posnr .
    and your check statement will become
    check my_flag NE XVBAP-POSNR. (or the ZZXVBAP-POSNR).
    and setting the flag
    my_flag = XVBAP-POSNR.
    so for same posnr it wont repeat the append.. hope this can help

  • Segmenting the data in the table

    Hello,
    I need to create the segmentation on a table. Below is the original data in the table.
    Begmeasure       EndMeasure       DetMethod         Testpressure
    0                          7703                  
    Acceptable          1006
    7703                     32149                Acceptable          
    1007
    8323                     32149                Not Verified           1010
    8323                     32149                Not Verified          
    1010
    10988                   32149                Acceptable             1010
    Forst row should be compared to its next row. If the next row beg and end measures are in between the first row's beg and end measures or overlaps with the first row, and first row method is " acceptable" and the test pressure is smaller, the first
    row segment stays as the final record. The logic has to loop through every subsequent row untill there is no overlap between the two compared rows.
    As shown below, the rows 3 and 4 are elimated/replaced with 2nd row becuase the detmethod is "Not Verified". Only 2 types of methods exists in the table, "Acceptable" and "Not Verified". In this 10988 is less than 32149, So
    its an overlap. So, we have to segment as 7703 to 10988 and 10988 to 32149. I want the result set to be like this below:
    After Segmentation :
    BegMeasure                EndMeasure           DetMethod            
    Testpressure
    0                                     7703                     Acceptable              
    1006
    7703                               10988                   Acceptable               
    1007
    10988                             32149                  
    Acceptable                 1010
    Please help me in achieving this. Thanks so much for all the help.
    Thank You

    >First row should be compared to its next row.
    First choice is set-based operations. However, you may have to do a cursor WHILE loop for this one:
    http://www.sqlusa.com/bestpractices2005/runningtotalusingcursor/
    Nested cursor WHILE loops:
    http://www.sqlusa.com/bestpractices2005/doublecursor/
    Kalman Toth Database & OLAP Architect
    IPAD SELECT Query Video Tutorial 3.5 Hours
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

  • Segmentação de Contas

    Boa Tarde.
    Estamos tentando habilitar no SAP a Segmentação de Contas, seguindo as orientações do material (apostila SAP) TB1100 página 2-10 / 2-11. Seguindo todos os passos de acordo com as instruções, quando chegamos no momento de SEGMENTARMOS AS CONTAS em ADMINISTRAÇÃO/CONFIGURAÇÃO/FINANÇAS/Segmentação de Contas a janeja que apareçe está congelada, não permitindo a entrada de dados.
    Gostaria de saber se alguém já conseguiu utilizar estas segmentações e se possível como realizou tal façanha...
    Abraço a todos!

    Rui, boa tarde,
    A solução que consegui encontrar não é bem essa, na realidade fora dos padrões da SAP da inclusão de novas informações no B1, é necessário clicar com o botão direito do mouse sobre # e inserir linha. Seria a única maneira de incluir.
    Obrigado por responder.

  • How do I display the next segment of an LVM file on a graph?

    I have built an application which reads in an LVM file containing 16 waveforms. I am taking 1000 samples at 1kHz. The capture may last for up to 3 minutes, so I generate a sizable file. When I read this file back and display it I only get the first segment of 1000 samples (1 second). Generally this is fine, but I want to be able to select to view the other segments as well. I have been attempting to use the "Read Measurement File" express vi.
    I have also tried to put the "Read Measurement File" in a while loop until I hit EOF and tied it to an "Append Signals" express vi before feeding it into the graph. This allowed me to see the last segment of my capture.
    I understand that the amount of data I am trying to display would be too much for the graph, but isn't there some way I can point to a segment and display it? The perfect answer would be to grab the timestamps of the segment headers in my file and populate a listbox. (I am generating this file with headers for each segment.) Then I could scroll through the listbox and select the "second" that I want to examine. Then I need the "selected second" to display on the graph. I suspect that this is possible because I am already pulling the waveform names from the file and feeding them into a listbox so I can select which waveform(s) I want to examine.
    Any Ideas?
    technomage

    Hi there,
    Have you considered using the TDM file format instead of the LVM format? With TDM you specify parameters for your file and your channels. When you want to read data from the file you can extrac data based on those parameters. So you could construct a search that extracts the data from a particular time, or all the data that was acquired in a 10 minute period for example.
    There are a few VIs you would have to become familiar with to do this (the datalog VIs are located in a palette on the File IO palette), but it would probably be easier for you to use these then to construct the file yourself and then program in all the search parameters.
    Here are some resources with more information on the TDM format:
    TDM Data Format
    Introduction to LabVIEW Data Storage VIs
    They should help you decide if you would like to use this format or stick with the LVM format.
    Sarah
    Applications Engineer | National Instruments | UK & Ireland

  • Unable to default DFF segment based on selection of other field value.

    Hi Gurus,
    *I have a requirement on 'Create Work Request' page (Oracle EAM), where during creating complaint, when user selects Asset Number, based on this selection, a DFF enabled to capture Tenant Info must be populated. [For testing now, I'm writing my code in PR and not in PFR to populate some thing while page loads.]*
    I have extended my CO and tried many ways (from simple to little complex) but to no success.
    Simpler way:
    *=======*
    OAApplicationModule am = oapagecontext.getApplicationModule(oawebbean);
    OAViewObject vo = (OAViewObject)am.findViewObject("RequestDetailsVO");
    Row row = vo.first();
    row.setAttribute("Attribute1","Attribute1"); //Attribute1 is the View attribute in above VO. But this doesn't work.
    row.setAttribute("DepartmentCode","CRC MAINT"); //DepartmentCode is a view attribute as well. And this works.
    This code doesn't work.
    Understanding that, DFF segments can't be set as simple bean, I have done below:
    *===================================================*
    OADescriptiveFlexBean oadescriptiveflexbean = (OADescriptiveFlexBean)oawebbean.findIndexedChildRecursive("WorkRequestDesc");//("WorkRequestDFF_p13n");
    oadescriptiveflexbean.processFlex(oapagecontext);
    if (oadescriptiveflexbean != null){
    ContextMap contextmap = oadescriptiveflexbean.getNamedChildMap();
    if(contextmap != null){
    Enumeration enumeration = contextmap.keys(oapagecontext.getRenderingContext());
    if(enumeration != null){
    do
    if(!enumeration.hasMoreElements())
    break;
    Object obj = enumeration.nextElement();
    OAWebBean oawebbean1 = (OAWebBean)contextmap.get(oapagecontext.getRenderingContext(), obj);
    oapagecontext.getParameter("WorkRequestDesc1")
    //String str = (String)oapagecontext.getNamedDataObject("WorkRequestDesc1")
    if(oawebbean1 != null)
    if(oawebbean1 instanceof OAMessageTextInputBean)
    OAMessageTextInputBean oamessagetextinputbean = (OAMessageTextInputBean)oawebbean1;//.findIndexedChildRecursive("WorkRequestDesc1__xc_");
    //oamessagetextinputbean.setReadOnly(true);
    oamessagetextinputbean.setText("Jawad");
    } while(true);
    Now the issue with above code is, during the page load, all the segments are populated with value 'Jawad'. I want to populate only the first segment.
    More info:
    *======*
    VO: RequestDetailsVO
    DFF Regions ID: WorkRequestDesc
    Attribute1 (DFF segment1) ID: WorkRequestDesc1
    Appreciate your responses,
    Jawad

    Dear Guys,
    I found out a workaround for this case (If this helps others): :)
    *1. Create a Message Text Input type field (representing each DFF segment) and map them to View Attribute (over which DFF was created) and VO instance.*
    *2. In the extended CO, in PFR, get the handle of these created fields.*
    *3. Set the values as required.*
    Since these fields are mapped onto the same view attributes as DFF was, the data goes in fine.
    But I still am hunting for the possibility of setting a single segment.
    Thanks and Regards,
    Jawad
    Edited by: Jawad on Apr 19, 2012 3:36 AM
    Edited by: Jawad on Apr 19, 2012 3:38 AM

  • ORA-01658: unable to create INITIAL extent for segment in tablespace

    NEW REPOSITORY INSTALLATION ERROR!!
    I want to install a new Repository using Oracle9iR9.2.0.1 and iDS10g on windowsXP Professional the same machine.
    After running all the SQL scripts ( ckqa,ckvalqa,ckcreate,ckreport) with success to installing a new Repository on my Database using "the Scripts Method",I start the Repository Administration Utility( RAU) to scheck the priveleges and so on.
    After pressing the Install button in the RAU:
    -I take public synonyms
    -I scheck the box for "Support Designer Objects", then
    -The Repository size is Medium
    -I have not change the defauft Tablespace of the Repository_Manager names TEMPORARY_TABLES to store the index and table of System Data....Diagram Data.
    After Starting, the Installation began an stop by installing some Tables like schown :
    Operation: Started : 07/03/04 20:26:32
    Reading File: cktabs.sql
    Object : TABLE CDDL_TMP_TBL
    Executing statement(s)...
    Verifying...
    .and so on till....uns so weiter bis
    Reading File: cktabs.sql
    Object : TABLE RM$INFO
    Executing statement(s)...
    Error Submitting Definition: User intervention required...
    RME-02124: Failed to execute SQL statement: CREATE TABLE RM$INFO
    (NAME VARCHAR2(128) NOT NULL
    ,VALUE VARCHAR2(128)
    Storage (initial 4K next 4K pctincrease 0) Tablespace TEMPORARY_TABLES
    ORA-01658: unable to create INITIAL extent for segment in tablespace TEMPORARY_TABLES
    Dumping Buffer...
    CREATE TABLE RM$INFO
    (NAME VARCHAR2(128) NOT NULL
    ,VALUE VARCHAR2(128)
    ...End of Buffer
    User Requested: Stop Process
    When I read the Help of the Error the
    CAUSE was: Failed to find sufficient contiguous Space to allocate INITIAL extend for Segment being created.
    ACTION: Use ALTER TABLESPACE ADD DATAFILE to add additional space to the tablespace or retry with a smaller Value for initial.
    I then try to resolve it by schecking and changing the Values of INITIAL_VALUE and NEXT_VALUE in the ckparams.txt to 500k.I change the Values of TEMPORARY_TABLES(10214 to 51200k) and TEMPORARY_INDEXES from (20000 to 100000k).Then I run the scripts @ckparams.txt, @ckvalqa, @ckcreate but
    -pressing the Scheck Privileges Button on the RAU still give me 106k for the INITIAL_ and NEXT_VALUE.
    -And the installato still stop with the same Error.
    Question: How schould I resolve this Configuration?
    You could respond in ENGLICH, GERMAN or FRENCH
    Thank you for your Help!

    You are running into database errors. You should refer to the database documentation on how to adjust the size your tablespaces. The online Designer installation guide will advise you as to the sizes of tablespaces you require. (http://otn.oracle.com/pls/wocprod/docs/page/ocom/technology/products/designer/supporting_doc/Des10g_9044/cmnhlp72/rep_insgde/igttl_9i.htm)
    Regards
    Sue

Maybe you are looking for