Segmentation in WebUi, profile group is locked

Hi,
I know when I create a profile goup in the WebUi and I open the target group, this profile group is locked for other users.
But when I opened the target group, I can't work because this profil group is locked by myself.
Have anybody the same problem or does anybody know how I can handle it?
Thank you in advance.
Best regards, Jasmin

Hi Murali,
The solution I am suggesting below is for CRM 5.0 pls validate the same for your requirement if it helps.
If you are executing BI Query with lots of data in BI System, it will give you timed out eror even in BI server. Now the same query we are using in CRM for Target group timed out error will appear even in CRM system. The way out for this issue is to put some filters for this BI Query as we do in BI Server.
In Segment builder we have an option "Edit Filter Conditions" where we can put the filter for BI queries used in CRM. This we can get by right click on the Attribute value.
My Suggestion is not to pick all your data at once try putting some filter and minimise the data to be collected in Target group. In other words split your Target groups in 4 to 5 Target gorups.
Hope this willl help
Rgds
Mallikarjun

Similar Messages

Cannot change planning profile group from Marketing Plan

I try to change the Planning Profile Group of a marketing plan from 'Business Marketing' to blank and get the error message
Transfer of char. val. combination only allowed with a time specification
Does anyone know what it means?
Philip

Hi Philip,
Are you specifying Time details in the Planning sheet.
Please check the same as it is one of the primary dimensions.
Best Regards,
Pratik Patel

Question relating tips for 2 DFF segments within the same group

Hi All,
I have a requirement where in I need to display a tip message for two of the DFF flexfield Segments within the same group. Currently we are displaying a tip for one of the DFF flexfield segment by placing it at the end of the Segment List and creating a normal tip message just below it. The shortfall of the above approach is when I add new segments to the DFF, the tip for the former segment is out of place.
Also, I currently have a requirement to create another tip for another Segment which is part of the same DFF. Could anyone of you please suggest how both the tips for the 2 DFF segments of the same group can be shown on the same page?
Thanks,
Sowmya.K
Edited by: user770244 on Nov 5, 2009 12:54 AM

Hi experts,
I am trying to find some solution that way:
- Maintain field catalog (FBRC008): setting field Segment as "secondary organisational unit" and setting field parter segment as "Secondary partner unit"
- Setting up a the reconciliation display (FBRC003) with the flag "Use Primary and Secondary org units and partner units in hierarchy display"
But when I launch the reconciliation display, the following dump arises :
"ITAB_ILLEGAL_COMPONENT"
In the current ABAP program "CL_FBRC_PRESENTATION==========CP" the internal
table "<LT_TOTAL>" was to be
processed with "SORT".
At the same time, a component "SEGMENT " was dynamically specified as content
of the field "ME->MD_SECONDARY_ORGUNIT_FIELD".
Do you have any explanation for that dump?
Thanks!

Creating a new BP in WebUI - Number grouping not editable

When i create a new BP in the CRM system using transaction BP everything works fine.
When i want to create a new BP in the WebUI (Customer Interaction Center) an error occurs 'Grouping 0001 has external number range, provide a number'.
Unfortunately i do not have a field 'Grouping' there where i could chosse the correct number range grouping (ZCRM which was by the way defined as internal standard in customizing). I am using the CIC with a standard business profile so i assume everything should be ok with the shown fields.
Somebody knows help?

The customizing of the grouping of business partner is done in different places dependiing on the GUI.
In SAP GUI it is inside the regular business partner customizing.
In WebUI there are function profiles and identification profiles inside the customizing of the business role that determine the grouping in which a business partner is created

Profile for children, lock, password

Dear all,
does anyone know how to setup two or more profiles on the iPad?
For instance one you use (Business), one for the family (Fun), one for the small child etc.
How to "protect" those?
Password? Gesture? ...
Is there a feature already? Or does anyone using the iPad always have access to all apps etc.?
cheers
- Sheerkhan

Sorry, no profiles on the iPad. Everyone who picks it up will have access to the apps.
I have suggested to them via their feedback page to consider adding a feature like that to the next software release (4.0). 4.0 includes a folder feature where you can group applications, and I also suggested that they allow the creation of a "locked" folder which requires a pin# to access. That would allow someone to put sensitive apps in a protected area. But I don't know if they'll add something like that.

View List of BP's in Segmentation Basis and Target Groups

Hi Experts,
We are using Segmentation Basis for Segmentation. When I create the Segmentation Basis using WINGUI I see that the list of Business partners in the Segmentation Basis is around 15,000 but I can view only 100 of them in the List output. Is there any other way where I can see all the BP's that are assigned to a Segmentation Basis/Master group.
I have a similar issue with the Target Group members in a Target group. The Target Group to file export will save the file to an application server to which all the users will not access . Is there any alternate method to view all the BP's in a Target group other than the file export to the application server.
Please Help.
Regards,
Pooja

Hi Pooja
I have the same problem with segmentation basis.
I have created a segementation basis for certain number of targetgroup example: 500 members
When i am trying to create a new profile set by selelecting the created segementation basis , no target group was displayed and it is showing as Zero. but the target group is displaying in SAP GUI.
Is anything i am missing , can you please let me know the steps for segementation basis procedure and how we can use them for further segementation.
Thanks
shashi

Mandatory Profiles, Group Policy Preferences, Synchronous processing

Hello,
I'm using Windows 8.1 Update to setup a lab of computers that will use standard user accounts with Mandatory Profiles and Group Policy to lock them down. Everything is working great with the exception of Group Policy Preferences. I am using GPP printers
to add a shared printer to the computer lab and set the default. Due to asynchronous processing, the GPPs are applied only every other time. Since they are mandatory profiles, the settings are wiped out every time.
I have enabled the GPO setting "Always wait for network at startup and logon" but it doesn't seem to have any effect. The Mandatory Profile is assigned in the user's AD object.
From everything I can find on the issue, the problem seems to stem from the synchronous processing/asynchronous processing of group policy preferences, which explains the consistent alternating working. Fast logon optimization is always off when using a
roaming user profile, which is the case of these standard users, to my understanding. I also configured cached logons to '0', disabling cached logons. The computers (configured to automatically sign in with SysInternals' Autologon) received an error (no logon
servers available) trying to sign in before the network was ready, showing that they are ignoring the setting. Even with waiting for the network and signing in manually, the GPP printers are only successfully added every other time.
http://technet.microsoft.com/en-us/library/jj573586.aspx
2008R2 functional level
I have created and recreated GPOs to test creating them on the DC and a Windows 8.1 Update computer, with no change in outcome.
I have also tried setting Startup policy processing wait time, run logon scripts synchronously, and GPP Printers processing behaviors. For the latest testing, I created a new OU with blocked inheritance and created a new GPO with just the key settings to
wait for network, install the printers, and use the mandatory profile. It still only worked every other time.
I am currently at a loss for a good way to add the printers to the mandatory profiles. I have hacked them into the HKCU of the mandatory profile but I feel that is a kludge solution and not very sustainable. I have tried a logon PowerShell script but had
no luck.
TL;DR: Win8.1Update, Mandatory Profiles, standard user: Every other restart, GPP Printers are added perfectly and the desired outcome is reached. Every other, other restart the printers are not added.

Hi,
I'll involve other engineer to this thread for more discussion about your problem. Please wait patient.
Thank you for your understanding!
Roger Lu
TechNet Community Support

Group Data locked for material

Hi,
I have an interface that failed because the "Group Data" of the material was locked.
I am aware of "Material being locked by another user". However I don't know how the group data gets locked or what group data refers to.
In most cases when I run the interface after some time, the material posts correctly. But I'd like to know what exactly locks group data and how I can check if it has been unlocked subsequently.
Thanks.
Urmila

Hi,
This message comes usually when you attempt to change the material using fm calls and material header MARA is locked (that is material itself is locked) by some other user .
What you can do is to call lock fm ENQUEUE_EMMARAE
before calling your material update logic and see whether the lock is successful. If the lock is successful then you can proceed with the update logic.
Sri

Material Group Migration - Locking of transactions??

Hi gurus,
I am looking at mass change of material group in the material masters for reporting purposes. Are there any impacts to any transactions such as certain transactions cannot be processed as the material master is locked during the migration? I need this information to determine when would be the good time to do the mass maintenance. Thanks in advance

Hi,
Yes, the mass maintenance of material group will be locked the material from any transaction.
You may do it when there is no traffic or less traffic.
Cheers,
Girang

Account Segmentation & GL By Item Group

Hi,
     My Client has so many branches with them, so it is mandatory to configure and go with Segmentmentation. In all the branches they are doing same business and selling same items so item group is common for all.
     Their GL is Setted by Item Group Wise.
      But the item group is common for all.
      But my client want to see expense, revenue, assets based on group wise for each segment.
      But in our standard B1, account mapping in item group can be done with any one segment only. But they have to see CoA balance like that.
      Is there anyway to achieve this task????

Hi,
I can see them wanting this setup; I've seen it before. (I am assuming you are working on setting up the CoA and not modifying an existing CoA.)
You will need a segment for item group and another for the branches. Keep in mind, the P&L and B/S reports can be run on segments, but not the Cash Flow and T/B (in 2007, not sure about 8.8).
HTH,
Heather

Status Profile based Distribution Lock

Hi Experts,
I have requirement in my project. We need to replicate the CRM Order in ECC on Status Delivered i.e for the Initial Status to Sent to Delivery Status, I dont want the order to replicate to ECC.
I know this can be done by setting a distribution Lock in status profile for the initial Status and then Set a Release Status to the Delivered status. I tried the same but im unable to maintain the Distribution Lock to the sales order.
Is there any other way it can be done. Or I'm doing it wrongly...
Regards,
Shashi

hi ram
thanks, how i give authorisation for particular user.. i need configuration setting for authorisation. i dont know what i tell to Basis for authorisation.
Consultant
with regards
dinesh

Collect causes segmentation fault when profiling L2 data cache misses on T1

I am attempting to profile L2 data cache misses on a SUN T1000 server, but collect causes a segmentation fault when I choose to profile L2 data cache misses.
Is it possible to profile L2 data misses on the T1 processor?
Thanks!
-John
A simple hello world application and the failed profiling:
%] collect -p +on -h ecdm hello
Segmentation fault
I compiled with
CC -xhwcprof -xdebugformat=dwarf -g -03 -o hello hello.c

No it is not possible to profile L2 cache misses -- the chip does not generate
interrupts on performance register 0 (only register 1, which is hard-wired
to instruction count).
That said, we should not generate a segmentation fault. Exactly
which version of collect are you using? We did patch Studio 11
to correctly handle the US-T1, and Studio 12 express also
correctly handles it.
Is the SEGV on the collect command, or on the target it launches?
Marty Itzkowitz,
Project Lead, Sun Studio Analyzer

Windows 8.1 mandatory profile Group Policy printer problems

We're a school district that is using mandatory profiles for the students. We use both Win 7 and Win 8.1 on the workstations. We're having a problem with group policy printer deployment on just the Windows 8 Workstations. I've tried using both the deployment
method in policies and the Preferences with Item level targeting and on the windows 8 ones its always intermittent. Sometimes you login and get the printers or some of them and sometimes not. Other times if you log out and back on etc. I've been troubleshooting
this for a week and have found with Win 7 it seems to always work but on our Win 8.1 ones about 50/50. The error in the Event log for that printer is this.
Group Policy Object did not apply because it failed with error code '0x80070057 The parameter is incorrect.' This error was suppressed.
What I've found that if I create a test account that does not use the mandatory profile the printers always map. Even on Windows 8.1. So far thats the only commonality. Can anyone tel me what I can look at with this. If they never worked that would be an
easier problem but its not consistent.
Thanks
Jason

Hi Jason, Did you ever find a fix for this as we are having exactly the same problem only with windows 8.1 computers using mandatory profiles and it's driving me mad. Any help would be much appreciated Thanks Dan

Power Manager - no new profiles, group policy not applying

Hi there!
Having an issue with power manager (latest version, downloaded today) on Vista on a T61. The first problem is that I cannot create a power profile. If I hit New on the advanced page and fill all the stuff out, the named power plan does not show up. It's like I never did it.
The second issue is that group policy doesn't seem to apply, either. I tried to create a new power policy through AD using the GPO available for download. All the settings are filled out, it's named, and it doesn't show up.
For those concerned that the group policy is mucking up the ability to create a new one through the UI, that was the behavior before the group policy was set up.
rsop.msc shows definitively that the policy is applying to this machine.
Does anyone have any hints?
Thank you!

rscurr,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

AnyConnect Client profile: group-url in server-list with OGS doesn't work propertly

Cisco Adaptive Security Appliance Software Version 8.4(4)1
Device Manager Version 7.0(2)
Hardware:   ASA5510, 1024 MB RAM, CPU Pentium 4 Celeron 1600 MHz
#show webvpn anyconnect
1.disk0:/anyconnect-win-3.1.00495-k9.pkg 1 dyn-regex=/Windows NT/
   CISCO STC win2k+
   3,1,00495
   Hostscan Version 3.1.00495
Profile in atthach-file. After this profile is uploaded to client Optimal Gateway Selection doesn't work propertly:
When 'vpn1.mydomain.com/mygroup' (it best TTL server) is unreachable, then OGS try to be connected to other servers, but without group-url, for example 'vpn2.mydomain.com' (instead of 'vpn2.mydomain.com/mygroup')

Anton,
It MIGHT be cosmetic:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtz92140
If not please open up a TAC case and provide DART for such a connection.
M.

Segmentation in WebUi, profile group is locked

Similar Messages

Maybe you are looking for