Seitenverhältnis Photoshop Album

Hallo,
ich verwende seit einiger Zeit Photoshop Album 2 und bin jetzt auf ein Problem gestoßen, das mir vorher noch nicht aufgefallen war.
Ich habe die Funktion verwendet, bei der meine Bilder automatisch gedreht werden. Das hat eigentlich auch immer ganz gut funktioniert, nur musste ich jetzt feststellen, dass die Bilder dabei beschnitten werden.
Ursprünglich kommen sie aus meiner Kamera mit 2592x1944 Pixeln (also 4:3). Wenn ich sie drehe, müssten sie demnach 1944x2592 Pixel (also 3:4) haben. Haben sie aber nicht, sondern 1458x1944 Pixel (3:4).
Ich verstehe nicht, warum das so abläuft, weil es ja nicht auf ein Standard-Fotoformat oder auf das Bildschirmformat zugeschnitten wird, sondern in genau dem Verhältnis vorliegt, in dem es vorliegen sollte, nur eben zugeschnitten.
Kann mir da vielleicht jemand weiterhelfen?
Danke,
Florian

Willkommen im Club! Das ist ein (im englischsprachigen Teil des Forums) gut dokumentierter Bug, für den es bisher keine Korrektur seitens Adobe gibt. Das Problem ist der von der Kamera automatisch gesetzte "Rotation"-Eintrag in den EXIF-Daten. Dieser wird von PSA zwar bei der Anzeige korrekt interpretiert, leider aber nicht beim Bearbeiten eines Bildes - daher verwechselt das Programm dann die schmale mit der breiten Seite ...
Zur Vermeidung solcher Pixelverluste gibt es jedoch einen Trick: vor dem ersten Bearbeiten müssen die Portraitbilder in PSA einmal nach und links und wieder nach rechts gedreht werden. Dadurch wird dieses Rotation-Flag gelöscht und das Bild "echt" gedreht.
Für die Bilder, die schon "beschnitten" sind, müßtest Du alle Bearbeitung wieder rückgängig machen ("Zurück zu Original"), die Bilder hin- und herdrehen und dann die Bearbeitungsschritte wiederholen ...
Ärgerlich, aber wahr!
(In PSE 3 wurde der Fehler übrigens behoben.)
Alexander.
1533 MHz, 1 GB, XP SP2, Canon Ixus 430 (aka S410), CanoScan D1250U2F, PSE v3.0, 3k images

Similar Messages

Seitenverhältnis 3:2 bei Photoshop

Werte Forumsexperten/Innen
Ich möchte VOR Entwicklung im Onlinelabor genau wissen, was mit meinen 4:3 Digitalbildern bei Ausarbeitung in ev. 3:2 Formaten (z.b. 15 x 10 cm) passiert.
Ich arbeite mit PSE 3 und habe keine derartige Funktion gefunden.
Optimal wäre wenn ich ähnlich wie bei der Stapelverarbeitung gleich mehere Bilder vorab in ein 3:2 Format bringen könnte und dann die kritischen Bilder (z.b. wenn der Kopf abgeschnitten wird) manuell auf 3:2 korrigieren. Vielleicht gibt es auch ein Freewaretool hierfür ??
Für jede Hinweis dankbar
Mario W.

Danke für die Rückmeldungen.
Noch für UteS: Meine Idee war, eine Stapelverarbeitung im Seitenverhältnis 3:2 bzw. mit dem gewünschten Format z.b. 15x10; 13x9 in einen neuen Ordner (natürlich als Kopie) erstellen zu lassen und die "Mißglückten" dann gesondert zu bearbeiten. Und dann erst ab ins Fotolabor.
Wenn ich viele Bilder habe ist diese Methode glaub ich schneller als sich von Bild zu Bild zu arbeiten.
Aber natürlich lasse ich mich gern eines Besseren belehren.
LG
Mario W.

A need to get photos of my baby from Adobe Photoshop Album Starter Edition 3.2 but I don't have a code so I cannot access in it. Somebody can help me, please?

Two days ago I introduced photos of my baby into my PC and automatically went into the programm Adobe Photoshop Album Starter Edition 3.2. Then they were deleted of my photo camera. Then I wanted to access to the photos in the Adobe Photoshop Album Starter Edition 3.2 but I read that since the end of Juny we need a decodification code and that now it is not availabel. So I don't have this code and I need to access to the photos. Please, somebody can help me?. Thank you.

Thank you for your help, Gunjan, but I have already tried to contact adobe tech support and I cannot get a code still now. I just find fixed issues where there is not shown my problem and I cannot find the way to write my question about my need of a code for Adobe Photoshop Album Starter Edition 3.2. Could you or somebody tell me the way to get the code through adobe.
Thank you
Mona05

Thumbnails in Photoshop Album SE & disconnected files

I need to know what I did wrong to avoid this from happening again AND I'm hoping there's a solution out there for me.
(Please note, I am DESPERATE and am trying to salvage deleted photos.)
Here's what happened: Part I: Turning thumbnails into working images.
1. I connect a digital camera card reader to my computer to "download" photos using Adobe Photoshop Album SE.
2. This has always worked fine, and then I modify the pics, which creates a file that has the original file name with the word "edited" in it.
3. Recently, I went through the same process of connecting my card reader via USB, and "downloading" all my files into Photoshop Album SE.
4. As per usual, I choose the download & delete setting.
5. I decided I would edit some of the photos at a later date.
6. When I reopened Photoshop Album SE last night, all the pictures I THOUGHT I had downloaded said they were "disconnected" showing a file path to the card reader, drive e. I was totally shocked. The files ALWAYS downloaded to c:/documents and settings/[my user name]/my pictures/adobe
7. So this time I can see all the thumbnails in the "view all" setting of Adobe Photoshop Album SE, but cannot get to any of the pictures. I get the "disconnected" popup.
I suspect I am screwed but I'm hoping someone can help me.
I clearly see all the thumbnails in the "view all". Is there ANY WAY the thumbnail images can be converted to real images? Where are the thumbnails stored that Photoshop can show them and say they need to be reconnected to the source which, in this case, Photoshop DELETED when "downloading"?
Which brings us to Part II: What the hell happened?
You'll notice I keep putting "downloading" in quotes. When I say, "Get all pictures" from my card reader, I thought all my pictures were being copied into the album. That's the way it's always worked previously.
Why didn't it work this last time? Was it a memory issue? Does Photoshop Album SE have a limit on how many photos can be loaded into any one album?
Is that why it "captured" the images but didn't really download them?
Any, and I mean, ANY assistance anyone can give me with this would be greatly appreciated. These particular photos I really, really need and staring at those thumbnails, unable to do anything with them is maddening.
Thanks,
Deidre

Hi Zona,
Do you have "System Restore" set up in Windows? I've actually never used it,
but it appears it MIGHT be a possibility if you did NOT store the images in
My Documents or a subfolder of it.
See the following:
"System Restore protects your personal files by not restoring any files in
the My Documents folder. It also does not restore any files that use common
data file name extensions, such as .doc or .xls. If you're not sure whether
your personal files use common data file name extensions, and you do not
want the data files to be affected by System Restore, save them in the My
Documents folder."
There are applications that can take previous "HDD images" (residual
signatures) so that you can possibly recover your images, but you would need
to take this to a special vendor for this. If the images are precious, this
might be your best option. Obviously it will cost some money but I know this
can be done... I just can't advise you on the where's and how's. You would
need to contact vendors in your location.
Cheers

Ability to use Adobe Photoshop Album tags in CS3 Bridge

I currently have 15,250 photos and 155 tags entered in Adobe Photoshop album. I would like the ability to convert, import or somehow use these tags in CS3 Bridge without reentering everything. PLEASE!

I request the answer to the same question.

Adobe Photoshop Album 2.0, migrate to iPhoto?

After 20 years owning PCs, I bought my first Mac. I have about 13,000 photos cataloged in Adobe Photoshop Album 2.0, but I'm having trouble figuring out how to preserve my organization in iPhoto (or even if it's possible).
Photoshop Album uses an external database that permits hierarchies, like Places - MD_MontgomeryCo - Rockville eg. I probably have 30 or 40 counties, some with as many as 100 locations.
I don't think keywords are quite the same, although organizing by album might help. I've downloaded Keyword Assistant from a Mr. Ferry iirc, and that makes keywords much more manageable. But I can't imagine tagging to create anything like my hierarchy of places.
Any thoughts or experience?
Oh, and how do you change the headings that seem to be automagically applied to each new batch of imported files?
best, Jon Angel

I have exactly the same problem - except I haven't got my new MacBook yet
I have been doing some research, though, and the chances of getting the tagging out of PSA 2.0 seem very small ...
However, I have found three theoretical possibilities.
1) I have tried the first steps of this 'solution' without any success, but I will mention it anyway, perhaps you are more lucky: There is a PC based photo cataloging application called IMatch (http://www.photools.com/). For this application someone has created a set of scripts, the first of which is capable of extracting the PSA 2.0 catalog into a plain text file (http://www.impulseadventure.com/photo/flow-catalog-imatch.html). I have been unable to make this work, but if you succeed, a second script (mentioned on the above website) should be able to import the tags into IMatch. As I understand, IMatch is capable of embedding the tags as IPTC keywords in the image files. I guess you could use a free trial version of IMatch for this operation, and if you should get this far, it should be possible to import the IPTC keywords info into iPhoto with this script (http://scriptbuilders.net/files/iphotoiptckeywordimportexportutilities1.0.1.html). Well, this was all theory, but maybe it could be useful ...
2) A second possibility is, that PSA 2.0 stores its caption in the EXIF Description field. Assuming you don't use the caption in PSA 2.0, you could go through your catalog one tag after another and write each tag into the captions of all the images, it is attached to. If it's possible to search in the EXIF Description feld in iPhoto, you could reverse the process when you have imported the images into iPhoto.
3) Newer versions of PSA (called Photoshop Elements) exist for the Mac. I guess they must be able to import from older versions of PSA, but I don't know.
I don't know if this is of any use, but I just wanted to share my own thougts of this process.

How do I get my videos to all work correctly in Photoshop Album Starter Edition Ver. 3.0?

I have been using version 3.0 for the last 3 years and had no problems with any of my videos playing once they were downloaded from my mobile phone or camera to version 3.0 until August 2007 but now a lot of them say 'The selected file cannot be played'. All the files that don't work are '.AVI' files and the only thing I can see they have in common is that in the file name it says -1x-1 next to the file size and length of the clip, whereas the working files have full numbers i.e. 640*480. I still have a couple of files downloaded after August 2007 that do play but not many. Is there any way I can change the settings or recover these files so they will actually play?

It seems to me that these problematic files may not be .avi files, or are corrupted; it doesn't seem likley that it's a setting in Photoshop Album Starter Edition.
Do any of those files play in Windows Media player? Another possibility could be that these files are sidecar files to your video files; are there similarly-named video files that work fine? If so, then I would suspect that these .avi files are, again, not .avi files, and could be simply text info that goes along with your .avi files, and could be ignored (removed from the catalog).
-Mark

Can't open a PDF file with acrobat photoshop album starter 3.0

scanned pictures and saved them as a PDF file in another computer. I think the version was 6 (but not sure). I downloaded acrobat reader (version + acrobat Photoshop to my computer.
now I'm trying to open the files in order to make some changes in the photos (cut them and so on), but I cant open them. can open them with the acrobat reader. but not with adobe Photoshop album started 3.0. I am getting a massage saying "the PDF file foes not contain any photos" and it shows the location of the file. the file definitely contains photos. what do I need to do?
thanks for the help, nilli

Is it Photoshop Starter Edition that is giving your the No Photos message or is it Reader?
If the PDF has photos in it, and you open it with Reader, you should see a toolbar called Picture Tasks. Picture Tasks will let you extract the photos.

Adobe Photoshop Album 2.0 to Adobe Photoshop Elements 12 Organizer catalog conversion

I'm having trouble converting Adobe Photoshop Album 2.0 catalog to Adobe Photoshop Elements 12 Organizer. I get a Conversion Failed error which tells me to repair with the program that created it. I have tried several things including deleting all .avi files from the catalog, deleting references to missing files and backing up then trying to convert from an external HD. I'm running Vista Home Premium on a HP laptop. The Organizer optimize and repair don't seem to help in this case.
Does anyone have any history with this or advice?

Please refer to following KB article which deals with catalog conversion failures:-
http://helpx.adobe.com/elements-organizer/kb/elements-catalog-conversion-fails.html

Convert Photoshop Album to PSE8

I have been using Photoshop Album Starter Edition 3.2 to organise my photos and recently bought PSE8. To transfer all my photos into PSE8 Organiser I think I should use the Convert option. (File > Catalog > Convert)
When I do and select Album as the place to convert from it displays the message: "The conversion operation failed. Try repairing the catalog with the software that created it and retry conversion". Album doesn't have a repair option, only a "Reconnect Missing Files", which says "No files to reconnect".
Can anyone tell me how to get my photos (2k+) into my PSE8 catalog with associated tags etc? I am in UK and have a very slow broadband service so I dont think sharing using Photoshop.com is possible / viable.
Any / all suggestions gratefully received.

See this FAQ:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Problems_converting_catalo gs

Adobe Photoshop Album v.2 - Can I restore from thumbnails only?

I am a complete IT donut. I do not know the terminology and I'm not even sure I am on the right thread!!!!!. But here goes if anyone thinks they can help.
I have Adobe Photoshop Album v2.0 that I have been keeping photographs on. Someone who shall remain nameless deleted a file which has meant that some of the older photos have lost what can only be described as the 'back up' to the photo - if that makes sense. We can see it as a thumnail (with a small legend depicting that it is "broken") but when we double click on it the computer browses for a file that it cannot find - obviously.
Is it possible to restore the photo using just the information that the computer has kept in order to generate the thumbnail? There is no way we can restore the information that was lost as its years ago, but just wondered if anyone knew of a way to do this.
I know this is probably a lost cause, but thanks for your time anyway.

All that is stored in the Photoshop Album catalog file is a small thumbnail, which is better than nothing,I suppose. But we don't have any tools that would allow you to harvest even the thumbnails out of the catalog file. The catalog file is an MS Access database; if you could find a tool to crack open and rip out the resources, then you would have what you want, but I wouldn't be able to tell you step 1 on how to do that; just that it should be theoretically possible.
Good Luck!
-Mark

Can I use tags I created in SE if I upgrade to Photoshop Album V2?

I am changing from Album Starter Edition 3 to Photoshop Album V2. I have already created a lot of tags in SE3. Can these be reused when I install Album V2?

Answered this on the PSA forum/

Photoshop Album Starter edition 3.2 abnormal program termination

I have just logged onto version 3.0 and I was offered an upgrade to 3.2 via the message centre. I followed all instructions and downloaded the files.
When I now go to open the Album an error message comes up headed:
Microsoft Visual C++ Debug Library.
In the window centre the message reads:
Program: ... Starter Edition\3.2\Apps\Photoshop Album Starter Edition.exe
abnormal program termination
(Press retry to debug the application)
When I press retry the program simply shuts down.
Any thoughts?

Ian,
Try uninstalling and reinstalling it. Something obviously went wrong
with the upgrade.
Cheers

Photoshop Album to iPhoto

Hi together,
I stopped to support Bill G. and moved to Apple a few days ago... I have 2000 photos being digitalized from real photo. They were maintained in Photoshop Album with Tag, Dates, etc.
A) Is there a possibility to pull this information anyhow? I don't want to update more than 2000 photos by hand; if this is the case, my turn to Mac was probably a mistake!
B) Furthermore I added information at Windows (as description, etc.) to those files. But it seems, that my Mac is not able to read this information... Is this possible and what I have to do?
Thanks in advance
h-a-r-r-y

Terence, You sound like you may be the best one to ask this question. I find the iPhoto method of tagging the photos very easy to use as in our daily work process there are maybe 20-30 basic variables features of our images and then we can combine a few simple clicks to properly tag each image. I have done this for thousands of our images here at the office ( on my Mac) and the problem I am facing is now that I have done that I am having my employees connect to my iPhoto over our network and they cannot search my photos using the tags, and I am not able to or I have not been able to figure out how to export my images to a main database of images with the tags attached. Do you know of anyway to work around this ? note we are still in 10.4 OS and still using iPhoto 6.0 , would upgrading solve this problem? thanks in advance - Eric

Photoshop Album Starter Edition 3.0.

Is anyone ever experience the problem to send/ register to adobe product registration?
I just got my new notebook, and this Photoshop Album SE 3.0 have been installed on the program files.
I have been trying to send the product/ register to adobe registration (which they request to make me able to continue using the program), but it keep says "internet send failed".
It's nothing wrong with my internet connection because I have been browsing around all the time, but I never able to send the registration.
Now, I only have 7 times left to be able to use this program without register.
PLEASE HELP ME. I need to be able to use this program everyday... and I am frustated.
Thanks!

Hi, Seems like your prefernces got corrupted. Try deleting all your user/application preferences placed at following location: C:\Documents and Settings\<Login Name>\Application Data\Adobe\Photoshop Album\3.0 This location is hidden location so in explorer, go to Tools --> Folder Options --> View and select 'Show hidden files and folders' Let us know if it solves your problem. <[email protected]> wrote in message news:[email protected].. > Cannot open photoshop after downloading.When i start to open photoshop > starter edition 3 ... there is ERROR CODE c0000005 , ADDRESS:1b816f56 > ... and needs to close .. > I have download this starter edition more then 5 times and alway have same > problem? > > Can somobody help me ? > Thanks

Seitenverhältnis Photoshop Album

Similar Messages

Maybe you are looking for