Selctedcell variant use in abap web dynpro

hi friends,
                can anybody tell me why we used selectedcell variant in  table column under table in abap webdynpro???? please elaborate with any example if possible.
regards,
sunil sharma

hi,
Cell variant is used to change the cell properties dynamically.In the Table UI element we have a provision that we can add the cell variant directly to the column, where as in ALV it is not possible. So we will create cell variant and will assign this to the column.
refer to the sdn article :
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/f0e7461d-5e6c-2b10-dda9-9e99df4d136d
rgds,
amit

Similar Messages

  • Parameters from abap web dynpro to visual composer

    Hello ,
    Can we pass output parameters from abap web dynpro to visual composer?
    <i><u>For Example:</u></i>
    ID NUMBER that we got in the application (Abap web...)
    and we want to pass it to import parameter of visual composer (start-point)
    I know about the mapping(in GP) but how we can see the output parameter of the abap web dynpro in GP-callable object(output parameters).
    When we use GP (callable object), we have input/output parameters.
    I need to map from abap web dynpro <b>(output)</b> to visual composer <b>(input)</b>
    Thank You,
    Boaz.

    Hi Boaz,
    Unfortunately it's one of the GP restrictions that it's not possible to transport parameter values from an ABAP web dynpro UI into the GP context. Vice versa is feasible, i.e. you can use an ABAP web dynpro UI and fill it with parameter values from GP context.
    Regards,
       Jan

  • Use of multiple components in ABAP WEB DYNPRO

    Hi,
    Am  new to  abap web dynpro and I just want to know whether  we  can  use  multiple components for an application in web dynpro.
    Thanks ,
    Dhaya.G
    Edited by: Dhayalinie Ganesh on Feb 22, 2012 12:06 PM

    Hi,
    depending requirement of application we can use multiple components.
    for example if we want to display table data into alv grid for that we can use the existing(standard component) ie: SALV_WD_TABLE  .Like such a way we can use the components as per our requirements.
    For importing components:
    --> Go to properties tab of view of your web dynpro application
    --> There you can find one button create controller usage ,click on it then import the components
    Thanks&Regards
    Sreenivas Pachva
    Edited by: sreenivas.p on Feb 22, 2012 1:11 PM

  • Use ZBEX Anonymous Login Service in BIApplicationFrame in ABAP Web Dynpro

    Hello,
    We created a ZBEX Service as an alias of the BEX Service as per SAP OSS Note 516884 to allow users to anonymously access BW reports.
    Now we want to embed the BI Web Application in an ABAP Webdynpro as a BIApplicationFrame.
    Note that the ABAP Web Dynpro is on the SAP R/3 ERP side while BI is a separate BW instance.
    The problem we are facing is the standard BIApplicationFrame element uses the SAP standard BEX service when it forms the URL and we do not seem to have a way to make it use the ZBEX Anonymous login service. Hence it always asks for the logon screen defeating our purpose.
    Has anybody done been able to make the BIApplicationFrame use ZBEX service and if yes, what is the solution to this problem?
    Thanks and regards,
    Atul Kulkarni

    Hi Ankur,
    Someone will somewhere call the EJB (not: "Java Bean"!). As an EJB isn't part of a request/response cycle but mainly thought for business logic, it is of course the task of the calling component to deliver the user (his logonID for example) to the EJB.  There is not other way!
    Hope it helps
    Detlev

  • How to use web service with ABAP Web Dynpro

    Hi.
         do you know, how to web service with ABAP Web Dynpro?

    Hi,
    If you have a webservice ready with you then you can generate a proxy from SE80 and you can use that. You just have to create a port and assign to that generated proxy(CLASS) and you are good to go.
    Let me know if you need more information.
    Thank You,
    Gajendra.

  • Use of multiple Applications for single webdynpro component in ABAP WEB DYNPRO

    I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications ,it just creates a application how so we assign diff functionality to each of them .Also in the parameter tab of the webdynpro applications ,there is a diff config id mentioned for each application.what is its relavance

    Hi Sam,
    Different functionalities for a single webdynpro component can be achieved by many ways. Among them is the use of multiple applications. Say for example if you want different views/windows to be displayed at the start up, you can achieve it by specifying at the default window, for each every webdynpro application.
    And if you want control the fields, say for example you want to display input fields as editable for one application and read only for other application, you can achieve it through application parameters. Based on parameters, in HANDLEDEFAULT method of window controller , you can specify the type of behaviour , whether it has to editable or not based on parameters and same can be used at context binding of UI properties. 
    Application configuration can be used for personalization.Web Dynpro ABAP Application Configuration. This tutorial would help you understanding the concept much better. There can be multiple application configurations for a single application.
    Regards,
    Harsha

  • Develop forms using Adobe Forms and ABAP Web Dynpro

    Hi, 
    Could someone help me on how to learn forms development using Adobe Forms and ABAP Web Dynpro?  Any suggestion on Tutorials / Books / other helpful hints please?
    I have good knowledge of Smart Forms and used these to generate PDF Attachments via emails.
    Thanks.
    Regards
    Keshav

    http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/d-f/faq%20on%20interactive%20forms%20based%20on%20adobe%20software.faq

  • Using IGS in Abap web dynpro application

    Hi ,
    I would like to develop an Abap web dynpro application with complex graphs.
    There is an installation of IGS services.
    In the layout screen I see only graphic basic options.
    In thr internet I saw much more options in the graphic label. ( WD applic-> view-> layout ).
    Does anyone know how to add this options to the view layout?
    Thenks,

    עיחיחןלכלןעל

  • Error while accesing ABAP web dynpro application

    Hi Experts,
    We are getting warning symbol on web page status bar, when we are accessing the ABAP web dynpro application
    only first page of application is getting loaded and when we click on page it is showing error on status bar and we can perform any thing.
    once we double click on warning icon,
    below details are coming:
    Line: 1491
    Char: 3
    Error: Object Expected
    Code: 0
    URL: url of the ABAP web dynpro application
    This scenario is occuring for many ABAP WD application for a client.
    Please guide how to solve this issue?
    Thanks!
    Piyush

    Hi
    First try a very simple application with nothing in it just one text saying Hello World
    Run it and see what happens.
    Also check if your url uses FQDN name. something like https:
    company.name.co:50000\.......
    If you do not use the FQDN it will always show a script error on the bottom and some functions will not work e.g
    dropdowns.
    regards
    Yuval.

  • ABAP Web Dynpro iView error

    My ABAP Web Dynpro iView encouters errors:
    The URL http://sp06:8004/sap/bc/webdynpro/sap/z_jgo_demo// was not called due to an error.
    Note
    The following error text was processed in the system SB2 : WebDynpro Exception: Error in UCF Template POPUP_PAGE ($).
    The error occurred on the application server sw06_SB2_04 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: RAISE of program CX_WD_GENERAL=================CP
    Method: RENDER_TEMPLATE of program CL_WDR_UCF====================CP
    Method: HANDLE_TEMPLATE of program CL_WDR_UCF====================CP
    Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
    Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP
    I was able to run the ABAP web dynpro application outside of portal by using the url: http://sp06:8004/sap/bc/webdynpro/sap/z_jgo_demo/. But with the extra / at the end, I get the same error.
    Can anyone point me to how to remove that extra / at the end?
    Thanks
    Ben

    Hi Gurus ,
    We have upgraded the SAP HR system from ECC6.3 to ECC6.4 and netweaver from 7.0 to 7.1 .
    Following are the list of error in EHP4 system ,
    1) Layout of ABAP Webdynpro Component are not displayed .
    2) Any ABAP WEBDYNPRO Application is not displayed by tesing in SAP-R3 and also in ESS .
    error are as follows while trying to view layout in abap webdynpro application :
    http://dv.hr.co.in:4567/sap/bc/wdvd/painting.html?_vdrespkey=4IS29CT7NDRIOI511AFI0R1E3&_vdframe=painting&sap-client=435
    If any one have information for this kindly let me know .
    Thanks :
    Vishwas

  • Can the role info be passed from portal to ABAP web dynpro application

    Hi,
    We have some roles in the portal. We call the ABAP web dynpro applications from the portal. Is it possible to pass on the role from the portal to the Web dynpro ABAP application so that we can use this role information in the application.
    Thanks,
    Pooja

    Hi,
    you can try to add the expression
      role=<IView.PCDUnit>
    as part of the Application Parameters in the iView. This will be the role in 99%. However not all iViews started in the Portal must belong to a role. You can start iViews using page navigation that are not part of a role. Therefore the PCD does not talk about roles but about "units" which is the superordinate term.
    the value will be the PCD path of the role - e.g:
      portal_content/myFolder/roles/myRole

  • Convert JAVA Web Dynpro to ABAP Web Dynpro application

    Hi,
    I was hoping someone could tell me if there is a way to port a JAVA Web Dynpro application to ABAP Web Dynpro. We have some JAVA WD apps that would now make more sense to have running on our ABAP system so we would like to convert them to ABAP WD apps.
    I know the theory is that WD is metadata/XML based so it should be possible to port the WD definition to ABAP and have the ABAP runtime generate the application again in ABAP. I expect that any custom code that is written in JAVA would need to be manually rewritten in ABAP - but it would be great if there was tool or method to at least port the majority of the application.
    Thanks in advance for your help,
    Simon

    Hi Simon
    You are correct in thinking that all WD apps are based on metadata, but unfortunately, the similarity between WD Java and WD ABAP is just a conceptual one, and no such tool exists to convert one to the other.
    In addition to this, there are certain implementation differences between ABAP and Java that mean you could not convert one to the other.  For instance, the whole concept of model objects does not exist in WD ABAP. Therefore, structural entities used in WD Java such as model components could not be tranlsated into anything that exists in ABAP, because the concept is redundant in the target language.
    Sorry about that, but Java and ABAP are sufficiently different beasts that such a tool is not possible.
    Regards
    Chris W

  • Adding an ABAP Web Dynpro application to a Java Web Dynpro screen

    Hey fellow SAPers
    This is an interesting one .........
    We have developed a bespoke ABAP Web Dynpro screen that we want to include into a tabstrip in a Java Web Wynpro application. We have managed to do this by inserting an iFrame into the tabstrip, and then passing the UWL of the ABAP Web Dynpro app. This works. However, life is never that easy and of course whenever the screen is refreshed, the ABAP WD app is called again and so any changes to the data on the ABAP screen are lost as the data in the ABAP app is re-selected and the data returns to it's original state.
    Does anyone know:
    - of another way to incorporate an ABAP WD screen into a Java WD screen (as a tabstrip)
    - how to de-activate a Java view so that the view containing the ABAP WD app is refreshed (i.e. the window is refreshed), the view is not refreshed and the ABAP app is not re-called .....
    - any other ideas ....
    of course, we could re-develop the same screen in Javam, but that would be too easy
    Looking forward to your responses
    Jon

    >
    > Hi Jon,
    >
    > First of all Iframe is not officially supported until 7.01 version.
    I believe it is deprecated in 7.01 and re-supported in 7.02
    [7.01 IFrame Help|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/15/c07941601b1d09e10000000a155106/frameset.htm]
    [7.02 IFrame help|http://help.sap.com/saphelp_nw70ehp2/helpdata/en/15/c07941601b1d09e10000000a155106/frameset.htm]
    >
    > Would you not use Portal for that and incorporate two iViews in a Page?
    I'm guessing you want to show this within the WDJ app not above, below to the left, right...
    This is a very very difficult thing to do - I'm guessing that you are not actively passing data into the URL of the WDJ IFrame, but just have "decorated" the WDJ app with the a statically linked IFrame. In this case the only thing you have to tie the two together is the user id that you are using - and potentially the time the app was launched. You could in theory use a shared memory area (watch out for multi app server environments) to store the state of the app in case it got refreshed... but this is not a simple thing to do...
    Consider if it is absolutely necessary to enhance the WDJ in place - hopefully you can just replace it with a WDA when you install EhP5
    Good luck,
    Chris

  • Exiting from ABAP Web Dynpro application

    Hi,
    In ESS portal we have one tab Personal info, there I have created one link and integrated my ABAP web dynpro application.
    I want to exit from the application and go back to the Personal info sub area. created one exit button in my application on press of that i need take this action.
    Please guide me with this
    Thanks!
    Piyush

    Piyush,
    I am not sure whether it works or not just get the navigation url of personalinfo subarea and using portal APIs navigate to that url when you click on exit button
    Thanks
    Bala Duvvuri

  • ABAP Web Dynpro: Application Configuration vs Admin Personalization problem

    Hi,
    I created an application configuration for the application MT_ORDER_APP with a component configuration on RPLM_MT_ORDER_COMP.  I changed several Labels and UI Element visibility... and saved.
    When I test this application config for viewing an order of type ZX99, I don't see my changes.  If I right-click on the page, I see that the configuration Id used is MT_ORDER_ZX99.
    Why my Z config is overrided by this one???
    By testing in Admin mode, I discovered that I can personalize this MT_ORDER_ZX99 Config.... But then, the changes are visible to all users viewing ZX99 type orders.
    How to manage to make my Application Config highest in priority?

    Hi,
    how did  you  open in administrative mode?
    to open in adminstrative mode do as follows:
    In se80 ,i.e in the menu bar:
    Web Dynpro Application->Test->Test in Administation mode.
    i hope u can see the option "Settings for surrent config" .
    you can refer the thread.
    [Re: ABAP Web Dynpro Application changes in Administation mode]
    Priya.

Maybe you are looking for