Selcting the Logical System in BD21

Hi,
  We are using Change Pointers in the Source R/3 system so that whenever the Data changes, IDOC is trigerred to XI and then XI will send the IDOC to the Target System.
  We want these modified IDOCs generated through the change pointers should go only to the XI System and not to all the other systems which are configured for this type of IDOC in the ALE Distirbution Model(SALE).
  In bd21 I do not see any option to restrict this modfied IDOC to just the XI Target System.
Thanks
Rajeev Gupta

Hi,
> In bd21 I do not see any option to restrict this modfied IDOC to just the XI Target System.
You will not see,
>We want these modified IDOCs generated through the change pointers should go only to the XI System
Can you explain in detail,
Regards
Agasthuri Doss

Similar Messages

  • An RFC destination could not be specified for the logical system

    Hello Experts,
    I am trying post goods receipt in EWM system in a simple inbound delivery process. It is not getting posted back in ECC. I have my RFC connection setup properly(I assume since I was able to transfer inbound delivery to EWM in first place).It seems some setting related to Outbound queue in EWM is missing.Can anyone tell me in detail what settings are required?Is it something to do with WE20 transaction?I am not sure what settings should be done there.The error log is as below-
    An RFC destination could not be specified for the logical system
    SB3CLNT011
    Message No. B1550
    Diagnosis
    An RFC destination should be specified for the logical system SB3CLNT011.
    This could not be done in this case. SB3CLNT011 is not your local logical system
    and this system is not included in the relevant Customizing tables.
    Procedure
    Check:
    RFC
    destination
    Port
    definitions
    oubound partner profile of
    message type SYNCH for this logical system
    Regards,
    Khushboo

    Hi Oritra and Suraj,
    I have checked remote connection in SM59 for both the logical system.It works fine.I understand this is more of a technical issue,but I don't have A local basis team to help me so reaching out to experts here.Can you guide me what technical settings could be checked for EWM-->ECC connection?When I execute BD82 for SB3CLNT011 it shows me green status with message "No messages have been defined for the selection conditions in the model".
    Although when I do this for EWM logical system SB3CLNT012 it shows me this with all green status-
    System SB3CLNT011 as a partner type already exists
    System SB3CLNT012 as a partner type already exists
    Port A000000018 with RFC destination SB3CLNT011 already exists
    Outbound parameters for message type SHP_IBDLV_CHANGE SHP_IBDLV_CHANGE01 already
    Outbound parameters for message type SHP_IBDLV_SAVE_REPLICA SHP_IBDLV_SAVE_REPLI
    Outbound parameters for message type SYNCH SYNCHRON already exist
    Am I missing something in WE20?
    Regards,
    Khushboo

  • How do you identify the Logical system in start routine of a transformation

    My scenario is this.  I have five r3 systems that I am extracting from.   In the start routine of the transformation from the r3 data source to my data store I  am going to delete data and I need to know the source system id.    How do I identify the logical system or source system id in the transformation.  Is there a system field that contains this information.    I do not want to hard code the source system id in the routine.

    hi
    have a lool at tables rsreqdone and rsbkrequest with a join you should be able to determine the source.
    regards
    Boujema
    How to give points: Mark your thread as a question while creating it. In the answers you get, you can assign the points by clicking on the stars to the left. You also get a point yourself for rewarding (one per thread).
    Edited by: Boujema Bouhazama on May 9, 2008 12:04 AM

  • Difference between the Logical System n Client

    Hi Guys,
      i need a some information plz help me.
    what r the differences between the logical system n the client.
    plz give me the detail explanation
    appreciated with points
    regards
    kk

    Hi there,
    'logical system' is used to identify an individual client in a system, for ALE
    communication between SAP systems. That's why you see a field for 'logical
    system' in the client master data in SCC4 (table T000).
    Client can be defined as commercial, organizational, and technical terms, a self-contained unit in an SAP system with separate master records and its own set of tables.
    Hope it helps
    Cheers
    Deepanshu

  • What is the logical system name used for in R/3?

    We have a R/3 server. The production client has a logical system name. What is the logical system name used for?
    Tony Tam

    Hi Tony
    Following Links will help you in understanding the concept
    http://benstudycenter.blogspot.com/2008/02/logical-system.html
    http://help.sap.com/saphelp_sm32/helpdata/en/78/217dc151ce11d189570000e829fbbd/frameset.htm
    http://help.sap.com/saphelp_sm32/helpdata/en/78/217dc151ce11d189570000e829fbbd/frameset.htm
    thanks
    Bhudev

  • Error in the logical system (BW - R3 connection)

    Hey guys, i need help, actually i created a connection between BW and R3 system, but i think i wrongly assigned the details to another BW system and now whenever i tried to load the data, it's not being processed.
    And i checked and it shows me that the connecetion is between source system (538) and BW (B3T800), though my BW client is BW (BW TEST). so how do you think i can change my background users i assigned while creating the source systems, because i think, while creating the source system, i used wrong background users. So instead of connecting via logical system (BW test), its connecting via (B3T800) to SAP R3 (538).
    --> Also i tried changing the Logical system name, as i checked and showed that for my BW client now it has a entry of the BW system (B3T800) and when i tried chnging it, it let me change that, but when i went to the RSA1, SAP doesn't let me access that, saying a message "your logical system has been changed", so can i change the logical system, do you guys think my problem will be solved?
    Regards,
    Amit Jaidka

    I have checked in SM37 taking that request number and when i checked the job log , its showing
    5 LUWs confirmed and 5 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
    Lock table overflow
    Job cancelled after system exception ERROR_MESSAGE
    what is the reason for this termination in R/3.
    Thanks

  • Use and impact of the logical system (SCC4)

    An error has been made in our SAP system (production environment), transaction SCC4. The field «Logicial system» has been changed from «PRD460» to «QAS460». It has been left this way for few weeks and when we realized the mistake, we changed it back from «QAS460» to «PRD460».
    For few hours, the document numbers in MM (t-code MIGO) were generated, but were not found in t-code MB03. We were able to generate them manually in t-code SM13 and the problem was solved.
    What is the use of the «Logicial system» ? What could have been the impact on our database and on the integrity of our system of having the wrong logical system set to our production environment for few weeks ?
    Thanks.

    Hi,
    Logical System Names
    When data is distributed between different systems, each system within a network has to be clearly identifiable. The u201Clogical systemu201D deals with this issue.                               
    A logical system is an application system in which the applications work together on a common data basis. In SAP terms, the logical system is a client.
    Since the logical system name is used to identify a system uniquely within the network, two systems cannot have the same name if they are connected to each other as BW systems or as source systems, or if there are plans to connect them in any way.
    Although SAP does not recommend that you connect test systems to production systems, a test system can have the same name as a production system. This makes copying production systems to test systems a lot simpler.
    You are only allowed to change the logical system name of a system if the system is not connected to any other systems, because changing the logical system name would render all the connections to other systems useless.
    Anil

  • This is not the logical system of controlling area 2000

    Hi,
      While creating Activity type / price planning in kp26....i am getting the the information like...
    "This is not the logical system of controlling area 2000"..
      but i am using the company code 3000 which is assigned to the controlling area 2000....
    so...kindly tell me how to come out of this....
    Thanks in advance..

    Hi,
    I assume the error is either KC028 or  COCORE081. In any case: please check if you have activated an ALE scenario for the relevant controlling area in TA OKKP1. Then check if the logical system differs from the system defined for you client in TA SCC4. If this is the case, then that is the reason for the error.
    Regards
    Karl

  • Not converting the logical system through BDLS

    Hi Experts,
    I did the system copy of BI system from production to developemnt
    To change the logical system  in RSA1 --> Source systems
    I have choose client role as test in scc4 and in tcode BDLS i have given the old logical system name new  logical system name
    after completing the job RBDLSMAP i checked in the RSA1 there is no change in logical sytem
    i got the following message
    SM37 log
    Job started
    Step 001 started (program RBDLSMAP, variant &0000000000005, user ID ABCD)
    Logical system name ABC500-1 does not match SAP's recommendation
    Job RBDLSMAP no longer exists
    Converted table: 'RSSTATMANSTATUS'; number of changes: ''
    Converted table: 'RSSTATMANSTATDEL'; number of changes: ''
    Converted table: 'RSSTATMANREQMAP'; number of changes: ''
    Converted table: 'RSSTATMANREQMDEL'; number of changes: ''
    Converted table: 'RSSTATMANPSA'; number of changes: ''
    Converted table: 'RSMDATASTATE_EXT'; number of changes: ''
    Job finished
    Spool log
    Table Name                Field Name       Number of Relevant Entries    Number of Converted Entries
    /BI0/ABP_CUST00*          LOGSYS                              0                              0
    /BI0/ABP_CUST40*          LOGSYS                              0                              0
    /BI0/ABP_VEND00*          LOGSYS                              0                              0
    /BI0/ABP_VEND40*          LOGSYS                              0                              0
    /BI0/ACDS_DS0400*         LOGSYS                              0                              0
    /BI0/ACDS_DS0440*         LOGSYS                              0                              0
    /BI0/ACDS_DS0500*         LOGSYS                              0                              0
    /BI0/ACDS_DS0540*         LOGSYS                              0                              0
    /BI0/ACLM_DS0300*         CLM_FISY                            0                              0
                              LOGSYS                              0                              0
    /BI0/ACLM_DS0340*         CLM_FISY                            0                              0
                              LOGSYS                              0                              0
    /BI0/ACLM_DS0600*         CLM_FISY                            0                              0
                              LOGSYS                              0                              0
    /BI0/ACLM_DS0640*         CLM_FISY                            0                              0
                              LOGSYS                              0                              0
    /BI0/ACRM_CMGL00*         LOGSYS                              0                              0
    /BI0/ACRM_CMGL40*         LOGSYS                              0                              0
    /BI0/ACSM_LINK00*         LOGSYS                              0                              0
    /BI0/ACSM_LINK40*         LOGSYS                              0                              0
    /BI0/AGN_BP00*            GN_PAR_LSY                          0                              0
    /BI0/AGN_BP40*            GN_PAR_LSY                          0                              0
    /BI0/AGN_CONV00*          LOGSYS                              0                              0
    /BI0/AGN_CONV40*          LOGSYS                              0                              0
    Could any body help me in this
    Thanks & Regards,
    Arun

    Hi experts,
    I have done the system copy form Production to Developement.
    Transfermations and DTP(Data transfer process) are still connected from Produciton R3 which  should be from developemnt R3.
    I have tryied to change the logical sytem name through BDLS. But the logical system name is not changed
    i got the job log which is in above conversation in my thread.
    Please let me know how to change the logical system name in Transfermations and DTP in RSA1
    Thanks & Regards,
    Arun

  • To get the logical system names of all the child systems in a CUA envirnmnt

    Hi Gurus ,
    Is there any table where we can find the logical system names of all the child sytems in a CUA environment .
    This is for a requirement that i need to develop an automated process where we can reset the password of all the child system in a CUA environemt when requested by the user at once .
    I found some tables such as V_TBDLS , but they do not contain the exact information what i need .
    Thanks in advance ,
    Harshit Rungta

    Hi,
    You are in the right track. BD54 will show you the logical system name for all the existed systems in CUA.
    Else you can also go to your CUA system and execute t-code SALE --> Basic Setting --->Logical Systems  ---> Assign logical system to client -
    > Display details
    here you can see logical system names for all the clients assigned to CUA.
    Thanks,
    Deb

  • How to change or rename the logical system name T90CLNT090 IN BI 7

    HI Expert's,
    i am really digging for the solution of changing or renaming the logical system name technical name T90CLNT090.
    in our company we are using ecc5.0 with bi 3.5 and ecc6 with bi 7. In BW 3.5 having a connection with R/3 and the technical name of the myself bw source system(logical system) is T90CLNT090.
    In bi 7 also the logical system name is same as T90CLNT090. Because of the same system name(Logical name) it is not active in BI7 and also it's giving error when i am activating the DSO Object as Transfer structure prefix for source system T90CLNT090 is not defined.
    because of this i am not able to create the source system between r/3 also.
    so how to change this source system name for T90CLNT090.
    regards
    harikrishna N

    Hi,
    Pls follow this OSS note : 325525.
    Note 325525 - Copying and renaming systems in a BW environment
    Summary
    Symptom WARNING: THIS NOTE HAS BEEN REPLACED.  FOR MORE CURRENT AND MORE COMPREHENSIVE INFORMATION SEE NEW NOTE 886102.
    You want to copy and or rename one or more systems (database or client copy). One or more of the systems is a BW system or is connected to a BW system.
    Caution: This note only deals with problems that occur in the BW source system connections. Other problems that occur in the BW environment (indexes) are NOT dealt with. See URL http://www.service.sap.com/bw --> Services & Implementation --> System copy & Migration.
    Other terms BW, source system, OLTP, database copy, client copy, system infrastructure, transport system, connections, RFC connection, trfc, transfer structure, IDoc, ALE customizing, logical system name, system changeability, renaming systems, system copy
    Solution Several scenarios are possible in this environment. Find the scenario relevant to your situation below and execute the steps listed or read the note(s) specified:
    Scenario 1) You do not want to copy a system but only want to rename one (changing a logical system name).
               Solution scenario 1): Execute Transaction BDLS both in the client to be renamed and in the connected BWs or BW source systems. To do this, see Notes 121163 and 369758.
               Check the RFC destinations in all connected BWs/BW source systems as described in Note 524554.
               Reactivate all partner agreements that carry the new logical system name after renaming.
    Scenario 2) You want to copy the entire system infrastructure connected by the BW source system connections (that means the entire system group) by a database copy. SAP recommends this procedure for copying systems.
               Solution scenario 2):
    If you want to rename one or more of the copied systems, then execute Transaction BDLS both in the client you wish to rename and in all the connected BW and BW source systems. See Note 121163.
                        Make sure that an RFC destination exists with the new logical name in every connected BW or BW source system.
                        Reactivate all partner agreements that carry the new logical system name after renaming.
    Change the hosts in the appropriate RFC destinations so that they refer to the correct computer. For this, see Note 524554.
    Scenario 3) You want to copy a single BW system of the group by database copy.
    Scenario 3)a) You only want to exchange the hardware of your system but do not want to rename the system.
                         Solution scenario 3)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
    Scenario 3)b) You want to keep the original system of the copy so that you have two systems after copying.
                         Solution scenario 3)b): See Note 184754.
    Scenario 4) You want to copy a single source system of the group by database copy.
    Scenario 4)a) You only want to exchange the hardware of your system but do not want to rename the system.
                         Solution scenario 4)a): You do not need to execute follow-up work regarding the system connections, except for adjusting the IP address in the RFC destinations of the connected system.
    Scenario 4)b) You want to keep the original system of the copy so that you have two systems after copying.
               Solution scenario 4)b): See Note 184322.
    Scenario 5) You want to import a client copy in a source system.
               Solution scenario 5): See Note 325470.
    Thanks & Regards,
    Suchitra.V

  • Is it possible to change the Logical System name in ID

    Hi,
    I am doing a file to Idoc scenario. My requirement is to overwrite the logical system name, which is set in SLD for sender (system). Is it possible to overwrite it in ID or in mapping somewhere.
    Thanks,
    Dehra

    Hi Dehra,
           Go through the below help file of SLD. It will give you information regarding logical name as well:
    <a href="http://xiserver:50100/sld/doc/sld.pdf">http://xiserver:50100/sld/doc/sld.pdf</a>
    Regards,
    Subhasha

  • In CIF customer exit there is no information about the logical system

    Dear All,
    we have a SAP R3 system (ver 4.7) connected to 2 SAP APO systems.
    we need to differentiate the UE code in R3 by APO TARGET SYSTEM.
    In the CIF userexit used:
    EXIT_SAPLCLOC_001
    EXIT_SAPLCSRS_003
    EXIT_SAPLPGS1_001
    EXIT_SAPLCSTK_001
    EXIT_SAPLMEAP_001
    there is no information about the logical system (source, destination
    etc.) The control parameters are not provided to the user exit.
    I found a note 1060634 where the parameter have been added to
    EXIT_SAPLCSLS_002 , but not to all other exits.... do you have any clue on how we can proceed?
    Thank you !!
    Best Regards , Barbara

    Found the answer, to bad i cannot give points to myself :-P
    In the ABAP i use the E_T_RANGE output structure.
    That structure has several fields (sign, opt, low, high).
    In my ABAP i stored the same value in the low and high field.
    This should work fine for normal (flat) characteristic values.
    However, because i use a hierachy i should enter the 0HIER_NODE value in the high field.
    For details see: SAP NOTE: 912473
    Regards

  • How to configure the logical system?

    hi,
    can you please provide the steps to configure the logical system?
    Thanks & Regards,
    NANDA

    Hi,
    Configurations in the SAP Source System
    http://help.sap.com/saphelp_nw2004s/helpdata/en/27/8d8342a7d30d53e10000000a155106/frameset.htm
    Creating SAP Source Systems 
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
    Connect BI system to R/3
    Hope this helps.
    Thanks,
    JituK

  • Getting the logical system from where RFC is being called

    Hi All,
    How can we get the logical system name from where RFC is being called?
    Regards,
    Akshay

    Hi Akshay,
    If your company follows the SAP recommendations on naming [logical systems|http://help.sap.com/SAPHELP_NW70/helpdata/EN/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm] <b>&lt;SystemID&gt;"CLNT"&lt;Client&gt;</b> then you should get away with a simple call to RFC_GET_ATTRIBUTES (and even if they don't, the function module might possibly provide other clues required to build the logical system name).
    There might be other ways, but I'm kind of suspecting that the logical system name of the calling system might not be part of the communication data (like other readily available data as IP address etc.). So if this solution doesn't work, it might be helpful to understand how the naming conventions for logical systems used by your company.
    Cheers, harald

Maybe you are looking for

  • Windows 7 and OD

    I'm having windows 7 trouble and joining an OD/domain Server is running mac osx 10.5.8 i followed the KB which solves the joining domain issue http://support.apple.com/kb/HT3742 and i still cant connect to the domain... error message says cant find i

  • Lync Server Control Panel : Insufficient access rights to perform the operation;

    Hi team, I have a strange problem in managing Lync users through control panel. But I can enable/disable and Manage users through power shell. Am getting an error " Insufficient Rights to perform the operations" when i try through control panel Pleas

  • Need Help regarding payroll ASAP

    Hi Friends.. i m new to hr-abap and i have installed IDES in my system. i want to know Can we work out on payroll and Time management programs with IDES data for practice or anything extra need to configure?? Please guide me as i need to start practi

  • Unix System Calls using Java

    Hi! Can anyone tell me how to do Unix System Calls in my Java program? If possible please give me the java code for it taking one unix system call as an example. Thanks in advance Raj

  • Modul pool

    hi, In a tablecontrol and I have add a scroll vertical in PBO_dypnro, so: DATA: vlines type i. DESCRIBE TABLE gt_itab  lines lv_lines. lv_lines = lv_lines + 1. tablecontrol-v_scroll = 'X'. This is OK, but now, when I press the vertical scroll, the PA