Select 360 printer: Paper Out LED flashing

Hi,
My trusty Select 360 is refusing to print; the Paper Out LED is constantly flashing. My research on this topic seems to suggest that there is a problem with the logic board.
A colleague had a problem with his Select 360 printer and no longer uses it. He has offered me his logic board as a replacement.
Will replacing the logic board fix the problem and, if yes, is it hard to do???
Thanks in advance,
trmartin

I ran the diagnostics. I got all 4 LEDS which means nothing wrong. I then ran the printer normally, and I could print a document right after it had switched on, but after the document had printed, I got the two flashing yellow lights again.
Also, when I ran it in diagnostic mode, it only printed one page, rather than two, and that page had nothing on it.
I am just running the diagnostics again...
Right. On-Off-On-On. Which is fuser assembly error. I though it might be something like that because most of the solutions to the two flashing lights seem to be doing something to the fuser.
So it seems to be a tempramental fuser.

Similar Messages

  • Windows 7 Driver for Apple Imagewriter Select 360 Printer

    Does anyone know where I can get a Windows 7 driver for my Apple Imagewriter Select 360 Printer?
    Thank you.

    Dear Carol,
    You may try this to install the Apple Imagewriter printer driver with the Windows XP CD:
    http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/883d00df-bdf3 -4dec-b91f-524963ec81a7
    Regards,
    Novia
    Message was edited by: Novia

  • 8500A Photo Printing Paper "Out of Paper" Message

    When I place a sheet of HP photo paper in my 8500A Office Jet Printer it will not print, either in the tray or the feeder. The unit states it is "out of paper."  Photos will print on regular paper, but NOT photo paper.  I have tried putting only photo paper in, photo paper on top of regular paper.  Nothing works.  BTW I see there was a similar post, but when I click on the "solved...go to solution" it returns to the post.  Any help would be appreciated.  

    I have the same problem. It's like it won't/can't grip the photo paper. I see the rollers touching the paper but it just won't advance to print. And yes, I have the paper in correct side (back) up .

  • Laserjet Printer paper out issue

    I have a Laserjet P2035 that will intermittently indicate that the paper is out when where is still paper in the tray.  Does anyone have a fix for this.  I looked at other blogs regarding this issue but found nothing specific to my model printer.  I have unplugged the unit, this did not help.  OS is windows 7 (32bit)

    @Rhumby
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • How do I select what tray/paper I want to print to?

    Okay, I can't figure out how I'm supposed to tell iPhoto or whatever I'm printing from where to print from. Sometimes I've got legal in the back tray, sometimes it's photo paper. Same for the main tray. Depends on what's going on in my office.
    How am I supposed to tell it where to go? I see presets but I can't duplicate the PAPER ON GLOSSY presets so I have to recreate them? I had to pull the main tray to make sure it wouldn't try and print from there since I'm printing pictures tonight.
    I guess this is meant to keep people from screwing up printing but it's screwing up those of us who know what we're doing.

    had the same problem on my new hp 7520: No option to select the photo tray in Photoshop Elements 10 on my MacBook Pro (OS 10.6.1).
    The solution was to use a preset generated in the seperate program standard on the Mac, Preview.  The preset causes an additional window to pop up when you press print, and allows you to select the preset.  You don't see this window unless a preset has been generated.
    To set a preset in Preview follow these steps (other programs could probably be used to set the preset as well):
    1. Select a photo and select print.
    2.  In the print screen select the paper size (eg. 4x6), then in the option that says preview use the drop down menu to select "printer features" which then brings up the options that we are looking for.  Set the paper type (eg. Hp premium papers) and source (photo tray).  Now go back to top and in the preset window select "save as" and give it a name (eg. 4x6 photo tray).   This has created a preset with specified paper quality, size and source which can be used in Photoshop.
    Once the preset is established you can easily print to the photo tray from Photoshop:
    1. Select a photo and select print.
    2. Select the printer, paper size and print size (should match preset) and select print.
    3.  Because of the preset, an additional window pops up allowing you to select the printer and the preset, then select print again to send it to the printer. 
    Of course you can have a number of presets, for different sizes or types of papers, different source trays or even different printers.

  • Hi I have lightroom 5.6. unable to select correct media type in print settings. I want to select  a matte paper but all matte paper is greyed out. Ideas?

    So far: installed new driver from epson. As below steps:
    Thank you for contacting Epson regarding your Epson Stylus Pro 4880. It is my pleasure to respond to your inquiry. Please try the following steps below in an effort to resolve your issue.
    1.Click Apple...System Preferences...Print & Fax/Scan
    2. Select your printer and delete it (click -)
    3. Download the latest printer driver from http://support.epson.com
    4. Open Mac HD/Library/Printers and trash the Epson folder*
    5. Open Mac HD...Applications...Utility
    6. Double-Click Disk Utility
    7. Select the Mac HD and perform: Repair Disk Permissions
    8. Install the downloaded driver normally
    9. Click Apple...System Preferences...Print & Fax/Scan
    10. Add a printer (Click +)
    11. Select your printer and click Add
    12. Try printing
    Didn't work yet.
    Epson is more familure with photoshop than lightroom.

    Just realised this happens without earphones and without using the running app. My iphone will only play 2 songs when I select shuffle in any playlist, driving me mad!

  • Blotch on the printing drum of Select 360

    I recently installed a new toner cartridge in my Select 360 Laserwriter. An ink blotch is showing up, mid-page, every inch and a half. I have gone ahead and printed out pages, hoping the blotch would come off on the print pages, but it persists after 100 pages.
    Cartridge instructions warn against opening the flap or handling the drum. Any suggestions?
    Thanks!

    Jim,
    When you replace a toner cartridge, you also need to vaccum out the printer. Some toner has fallen into the printer rollers and is being picked up by the paper.
    The inch and a half measurement tells you which roller it is because they use rollers of a different circumference in different locations of the printer so a technician can tell which roller needs to be cleaned.
    I am not at the computer that has those measurements but I can look them up. You can also check "fixyourowncomputer.com" for additional cleaning help.
    I would start with a vaccum and a soft felt pad. Good luck.
    Jim

  • Can't find a printer driver for LaserWriter Select 360?

    My older G4, which I just upgraded from OS 9.2 to OS X10.3.9 (I was reluctant to leave PageMaker), doesn't have a printer driver for my Apple LaserWriter Select 360. It finds my Epson 2200 with no problems. I've tried two shareware programs. The first seemed to say that Apple Printer Drivers were missing and that it had reinstalled them (but I don't remember the name. I found it in one of the threads here). But there was no sign of the LaserWriter when I tried to print. The second program I tried was Pacifist, figuring I could just reinstall that one printer driver from the Panther disks. But I couldn't see it anywhere though there was two Epsons, Hewlitt Packard and others. I tried the Apple website, but had no luck. I know there is one because two other computers we have in OS Xs can recognize the printer. Is there a driver out there I can download or is there someway I can get it off the other computer I have that is in 10.3.9? It's really frustrating to have to transfer the regular stuff I want to print to another computer.
    Thanks!! Jane
    G4   Mac OS X (10.3.9)  

    We're halfway there...maybe! The printer shows up on the list, but when I try to print something (I tried an InDesign file, also a Word one), the computer sends the file and the printer starts, but then puts the job on hold (the green light on the printer never blinks). If I click Start Job, the same thing happens again.
    When I looked at Help and found "Setting up to print to an IP Printing network printer," it said to "type the IP address or DNS name for the printer in the Printer Address field." I looked through my "User's Guide" and didn't know what that was. It wouldn't let me "ADD" the printer without one so first I typed in the whole name of the printer that was on the list below. Then it let me ADD, but not print. Then I tried it again with the word "home." Same thing, it added the printer but wouldn't let me print.
    One other question I had was when I got to the Add Printer, IP Printing, I had to choose a "Printer Type." It was on LPD/LPR so I left it. I didn't know what any of the choices meant. Perhaps that was wrong.
    Now that the LaserWriter is on the list, can we make it print?
    Thanks so much, Jane

  • I highlight selection in my email, click print/selection, printer spits out a page with nothing on it

    Yahoo email...months ago I could highlight and print selection
    Can select and print selection from everywhere (document files, web pages) except email

    Yahoo has been changing its mail design. Are you trying to print from the "print optimized" view (which opens in a pop-up window or separate tab)? Depending on which version of Yahoo mail you have, this may be on the "More" menu or somewhere else. (Sometimes I get a popup block; in that case, trying again works for me.)
    More generally...
    When Firefox produces a blank page printing a selection, this could be because the selection is laid out "off" the page (e.g., to the side or on a later page). The position of the selection on the page depends on how the page was laid out by the site design. Firefox sometimes will isolate the selection at the beginning of the print job, but very often will keep it within the original layout and simply blank the rest of the content. This can be wasteful or even useless.
    Here are some workarounds:
    (1) [https://addons.mozilla.org/en-US/firefox/addon/nuke-anything-enhanced/ Nuke Anything Enhanced extension]
    See: [https://support.mozilla.org/questions/927457#answer-333518 When using print selection in Firefox 12.0, it prints wherever the selection is on the page (on paper) instead of at the top of the page (of paper)].
    (2) Use a bookmarklet (snippet of JavaScript saved as a button on your bookmarks toolbar) to isolate the selection for printing.
    This is the technique I generally use due to force of habit. The details are in [https://support.mozilla.org/en-US/questions/943039#answer-384875 this post].
    Any luck?

  • Running a Mac G3, having been using a Laserwriter Select 360, but it and two others are now dead. What is the next best or better printer to use?

    I am running a desktop beige Mac G3 and have been using a Laserwriter Select 360, but it an two others are now dead.
    What is an equal or better printer to use with the Mac?

    Hey, BD, I looked at Brothers last night in connection to this questiona and it looks like their newest/current laser print-only units go back to 10.4 but no further.
    Brother is the best hope but the OP may need to look for an older model still in stock. For example, for our older Brother HL5250DN, they still show OS9 drivers:
    http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?r eg=us&c=us&lang=en&prod=hl5250dn_all
    Gary, web-check for stores that still have older models on teh shelf. You can also look at "newer-but-not-new" and then use the Brother site to check for OS9 drivers.
    Founds some of my model on eBay:
    http://www.ebay.com/sch/i.html?_nkw=Brother+HL-5250DN
    We paid US$199 for ours new about seven years ago. It's been a real workhorse and trouble-free. Well, except for the time my wife tried to feed it a odd paper stock that was not on the printer's official diet!
    A Beige G3 consideration: The Big Beige doesn't come with USB ports. You must add a PCI USB adaptor card, and the ones that worked in the Beige are harder to find today.
    However, the Beige has built-in ethernet so if you get a printer with an ethernet connector, you will be in bisiness with neither the expense of an extra adaptor card nor the occasional buttheadedness of USB printing. The "N" in our Brother model designates it as a network printer so it has an ethernet port. Many others do also.

  • HP 5610v- Paper out light continually flashing

    My printer has the paper out light continually flashing with plenty of paper still in the tray. If anyone knows a fix please post it or send me an email. My address is [email protected]
    Thanks
    klbilly

    what is the exact error message on the display of the pritner? what happens when you press OK or the Cancel button?
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • How do I select a thick paper to print from Indesign?

    How do I select a thick paper to print from Indesign? I have to go to the printer to select the thicker paper. I would like to select the paper from my computer in Indesign.  Other programs allow this.

    At the bottom of the print dialog box is a button labeled Printer. That will lead you to the printer-specific options like paper weight.

  • My HP PSC 2175 printer spits out blank paper while I try to print.

    I have Windows XP service pack 3. My printer(HP PSC 2175 All-in-one) use to work well until few days before. I leave the printer unused for few days and now when I came back to use it , it simply picks up paper scans( a ledger like light runs to and fro at the top end of paper) and spits the paper out.This  only happens when I try to print. I can still make black copies well from the same machine. I only have Note pad and Word Pad. It does the same with both. I tried with pdf document too. It still persists its problem. But if I open the Hp service tool box through printing preference and print the test page it prints.
    I have tried every thing that I can do. I've repalced the new cartiage, uninstalled the existing driver softer and installed new from hp website. Updated them and what not.
    Can you tell me what is wrong with my printer? pls.

    Hi,
    It looks like you've tried some of the troubleshooting steps listed in this document, but there are a few more to try first.  Click on the + besides the XP section and follow the steps in order.  See if this helps, if it doesn't I'll look for some more.
    Printer Prints Blank Sheets
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • I'd like to select print paper size with using AxAcroPDFLib method depend on user

    I'd like to select print paper size with using AxAcroPDFLib method depend on user
    request. Is it possible? in AxAcroPDFLib?
    Is there any method to select print paper size in the C# programming.
    Or if you know another method, please introduce how to use.
    Thank you for your cooperation always.

    I am pretty sure that you can only do this from JavaScript or from C/C++ APIs.

  • CS5 will not print on new Epson 3880, message paper out or paper not loaded correctly

    CS5 will not print on new Epson 3880, message paper out or paper not loaded correctly

    In the Print dialog box, click Print Settings and verify the Paper Size you chose. This is important because the 3880 has three paper feeds (auto sheet feeder, rear manual feed, front manual feed). And for each major paper size you have to choose not only the size but also the correct feed. For example, if you want US Letter, choose US Letter, notice that this menu expands to five more US Letter paper size options, and choose the specific US Letter paper feed you want.
    If there is a mismatch between the paper size + feed combination you picked and the feed where the paper actually is, you can get the error that you're seeing. Because the Epson printer driver will look for the paper in a feed where there isn't any paper.
    So if you've added US Letter paper to the automatic paper tray, in Paper Size double-check that you chose the US Letter submenu command that says just US Letter, not one of the other options like US Letter (Manual - Front).

Maybe you are looking for