Select a photo via buttonGebruiker van Formulier een afbeelding laten selecteren en dit in formulier invoegen.

I am working on a form where in the user should be able to select a picture/photo via a button in the form. The button should then open a new window in which the user can select his or her picture/photo. So n the form I am making I thought to insert a button and give it the action for opening a selection window. Only after making this button I found out that the wanted action is not available.
Can I add this action, or am I thinking in the complete wrong direction?

See: https://answers.acrobatusers.com/Is-create-form-users-upload-photos-form-q195128.aspx

Similar Messages

  • The problem is with the new operating system  and sending photo via email when used in my iPad.   From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

    The problem is with the new operating system  and sending photo via email when used in my iPad.
    From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
    Can you amend he system to allow emails to be sent from photo as previously.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

  • When I select a photo on my iPhone and send it via email, the receipient receives it sideways. Any way to fix that?

    When I select a photo on my iPhone and send it via email, the receipient receives it sideways. Any way to fix that?

    When you took this photograph your phone was being held in that way. Sideways, try taking the photo straight on. Or it is the Picture file itself, open up the application you edit photos with and rotate it to be proper orientation. I recently had the same problem but you either have to retake or edit it at this point.

  • Can't select-all to set up folder to share photos via email

    Following directions, I imported photos from cds, and created files for them. Except for a few early efforts, I can no longer share multiple photos via email. The select-all feature will highlight but not outline all photos, only one, and that is the only one that ends up in the email.

    I'm so sorry, I wasn't aware I was posting in the 08 arena. iPhoto 6.0.6.
    Directions were from help, but also googled for iphoto. The pictures are in the mac. I hit the + button to, pardon my miserable mac vocabulary, to create a folder. I thought that is what it is called. I used to be able to go to SHARE, after creating said "folder" or whatever you call it, and then after choosing "select all", all the photos in that -- whatever you call it -- would appear in the body of the email, and all I had to do was move them around, add text, and send it off.
    Now, when I hit "select all" only one photo, the one on the far left, is "highlighted" in blue. In some cases I can get all the photos in that, whatever you call it, surrounded by a gray box, with only one encircled in blue. But only the one highlighted ends up in the email.
    I'm sorry for being such a moron, but I remember when Apple was easy enough to use that you didn't have to have a ten year old in your house to show you how to use it. And there was no specialized language.

  • Only view selected photo via Airplay

    Hello,
    I have thousands of photos on my iPad. With iOS7 and iPhoto it was possible to select a photo on the left side and this photo was streamed to Apple TV. And when the audience watched the photo I searched on the left side the next photo, clicked on it and this photo was streamed. I think the setting called "Only view active photo" or something like that. It was very comfortable.
    Now in iOS8 without iPhoto I can only view the mirror of my iPad /all photos) to select a photo and then the selected photo in fullscreen. To select a new photo I have again to switch to all photos and have to select the new photo I want to show.
    Now I'm looking for a app or solution, that I can find and select a new photo while the audience watch only one selected photo on my TV.
    I hope it is quite clear what I mean...
    Thanks a lot for your help
    Daniel

    Yes, the data rate of your video is unnecessary (about 50 Mbps) Assuming it's 1080p it needs to be no more than around 10 Mbps.
    Your video needs finishing (converting) which you can do either at the end of an editing process or in a stand alone application such as Quicktime.
    If it takes time to buffer, it's not mirroring, mirroring is live, it's sending the Apple TV the file which is far to large. Although you should expect some buffering.

  • I have lost ability in the share module to send photos via e-mail  from my catalogue to selected addresses

    I have lost the ability  in the share module to send photos via e-mail to selecred addresses. I have checked my settings and everything seems in order but still does not work, can I just reinstall elements 10 over my original elements 10 to repair

    Hi Bob,
    If you are using Windows Live Mail (WLM) 2011 then I think you may need the fix mentioned in this document to enable WLM in the Elements sharing preferences.
    https://helpx.adobe.com/photoshop-elements/kb/freeze-or-error-no-email.html
    If you want,m you can update to Windows Live Mail 2012 from here
    Windows Essentials - Download Windows Live Essentials
    When you try to send an image using Photomail, how far do you get and what happens?
    Brian
    Edit: The fix mentioned in the first reference above seems to have dropped out of the system. It is probably best to go for the 2012 version which doesn't need the fix.
    Brian

  • When trying to send a photo via email, I am prompted to setup an email account even though email is already setup.  What would cause this?

    when trying to send a photo via email, I am prompted to setup an email account even though email is already setup.  What would cause this?  Better yet, how do I fix it?

    I have checked this on my device.  I see a Default account under Messages created outside of Mail will be sent from the default account.  There is an account selected, though it does not show my exchnage account.  If it is only an exchange accout, can that not be used for this?

  • How to select multiple photos by programming

    hello everyone,
    I want to select multiple photos from photoalum each time by programming， could you tell me how to do ,thank you very much.

    By programming how - with an app?
    The iPhone does not include an option for this, but you can manually select multiple photos to be shared via email or MMS, or to be copied.

  • When I synch a file "best photos" via iTunes to my iPhone I get two identical files - "best photos" and Photo library.  I don't know why

    When I synch a file "best photos" via iTunes to my iPhone I get two identical files - "best photos" and Photo library.  I don't know why

    All photos transferred from your computer via the iTunes sync process are stored in the iPhone's Photo Library.
    When transferring multiple albums or a single album, the photos in the albums below are not duplicated as in taking double the storage capacity for the photos. Photos in an album or albums below include a pointer to the original photos stored in the Photo Library.
    This way you can view the photos in an album only by selecting the album, or all photos in all albums by selecting Photo Library. Makes more sense when transferring multiple photo albums from your computer but the same applies when transferring a single album or folder of photos.
    The same applies to iTunes playlists. A song placed in a playlist is not duplicated.

  • Control key not working when selecting multiple photos for email

    Okay, I can't seem to send more than one photo through email no matter how I try to "select them." I am able to select the photos from the photo library. I see the little scrolling screen at the top of the page and then use the control key to select the photos which appear in the larger screen beneath. The problem is, is that I can't send all of the pictures through email, it thinks I am only trying to send one. When I look at the big screen with the pictures I have selected it looks like only one is highlighted and no matter what I try (the control key, shift key) it won't select them, it pops up with an picture editing function. Is my iphoto screwed up? Help!

    Okay, I tried both. I clicked <done> at the bottom of the screen and the scroll bar at the top disappeared and then I just see one large photo. The only thing that happens when I double click on the large photo is that it comes back to the scroll bar at the top again, or vice versa. Does that make sense? I'm seriously wondering if my software is screwed up. My husband finally was able to send multiple pictures via email by creating a slideshow and selecting the pictures that way. (iphoto help says you are not able to select pictures to send through email through a slide show....go figure.) I still need to get out of this mode and don't know what to do! Any other suggestions?

  • Can't share photos via e-mail from iPhoto

    I am trying to share some photos via iPhoto by mail. When I try to enter an e-mail address in the To box, it won't accept it - as soon as I leave to box, the address I have written just dissappers. It also won't allow me to just select the address that shows up when I start typing.
    I see that people have had this problems even last year and since I have just upgradded to version 9.2.2 I am disappointed that this bug still exists. I would have thought other people would have the same problem but I haven't seen any fixes or answers. Is there something in my settings that is wrong?
    Hope someone can help!

    iPhoto Menu ->
    Preferences ->
    Accounts ->
    Delete and recreate your email settings.
    Alternatively, use Apple's Mail for the job. It has Templates too - and more of them.

  • Select multiple photos in Mail

    I recently upgraded to Mavericks. Now, when I have a Mail (ver. 7.3) message with multiple photos, I can only seem to select one photo at a time. I used to be able to Command-Click to select as many as I wanted, and easily drag them into another email or file. Is there some other way of doing this? Also command-a and command-shift don't help any more for selection, like they do in most other Apple apps.

    timmilner:
    Make sure they have an extension on the files. You can do this by Right-clicking (Control-clicking) on the photo in the email and selecting the contextual menu option "View as icon". This will show the file name and size and show the default application, i.e. Preview or Photoshop, etc. This will give you some idea as to what's going out.
    If you add the photos to the email via the Finder, resize them at the bottom of the email window, you can go to the Edit->Attachments menu and select "Send Windows friendly attachments". Just another way to send attachments.

  • When connected to Facebook, and select a photo to view, it is not shown, I have to download it to be able to see.

    THE SCREEN APPEARS IN WHITE AND I CAN SEE THE ICONS TO MOVE FORWARD OR BACK AND TO CLOSE THE SCREEN, BUT NOT THE PHOTO.

    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    You can use these steps to check if images are blocked:
    * Open the web page that has the images missing in a browser tab.
    * Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
    * Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
    * Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    * Select the first image link and scroll down through the list with the Down arrow key.
    * If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    * Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
    * Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    * Check the exceptions in Tools > Options > Content: Load Images > Exceptions
    * Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images)
    There are also extensions (Tools > Add-ons > Extensions) that can block images.

  • Failed to send out photo via imessage?

    Using ipod touch 5, can not send out photos via imessage, please help!!

    Dear,
    If my last answer could not solve your issue, please refer to the informaiotn below:
    The reported issue occurs due to the fact that outlook can only send attachments from the Business One attachments folder.
    This issue has been fixed in 2005A SP01 PL41. Please refer to the note 1116389. As a solution we would suggest to upgrade to the latest patch level.
    Until you upgrade to latest patch of 2005A SP 01 you can use the following workaround:
    - Manually copy all attachments to the B1 attachment path before sending this mail. If you create a shortcut to your attachments folder in a convenient location (perhaps the desktop) this can be done very quickly. (Browse to your document, right click and select copy, press the Windows Key+D to go to your desktop, double
    click the shortcut, then paste into the attachments folder.)
    Alternatively, you could either:
    - Change the B1 attachment path to your attachment files path.
    or
    - Uncheck 'Send E-mail via MS Outlook', and send this message. Nowthese attachments will be copied to the Business One attachment path.
    Then send this message again, with 'Send E-mail via MS Outlook' checked.
    Further we would suggest to apply following steps:
    -upgrade your MS Office 2003 application to the current SP. (SP3)
    -verify that the sender's e-mail address defined for the sender in SAP Business One is valid.
    -Set up the correct smtp server in SBO Mailer / General Setting /Mail Settings (you should check with a "Test connection" button)
    Wish the information could solve your issue.
    Regards
    Apple

  • Ik krijg de volgende melding als ik mijn iphone aansluit en mijn foto's automatisch wil laten importerenPhoto kan de foto's niet importeren omdat er zich bij het downloaden van een afbeelding een fout heeft voorgedaan . wie kan mij helpen?

    ik krijg de volgende melding als ik mijn iphone aansluit aan mijn macbook pro en mijn foto's automatisch wil laten importeren
    Photo kan de foto's niet importeren omdat er zich bij het downloaden van een afbeelding een fout heeft voorgedaan .
    wie kan mij helpen?
    groetjes imke

    LaPastenague:
    THX....
    I still have a problem because I can't backup mine old stuff on the external USB device
    So I treid it again and as you can see it is really not working:
    2012-07-12 07:27:26 +0200: Partitioneren van schijf voorbereiden: 'MacBook Pro van John.sparsebundle'
    2012-07-12 07:27:26 +0200:           Partitie-indeling: Apple-partitie-indeling
    2012-07-12 07:27:26 +0200:           2 partities worden aangemaakt
    2012-07-12 07:27:26 +0200:
    2012-07-12 07:27:26 +0200:           Partitie 1
    2012-07-12 07:27:26 +0200:                     Naam                    : 'Time Machine-reservekopieën'
    2012-07-12 07:27:26 +0200:                     Grootte                    : 1,5 TB
    2012-07-12 07:27:26 +0200:                     Bestandssysteem          : Mac OS Uitgebreid (hoofdlettergevoelig, journaled)
    2012-07-12 07:27:26 +0200:                     Wis inhoud niet
    2012-07-12 07:27:26 +0200:
    2012-07-12 07:27:26 +0200:           Partitie 2
    2012-07-12 07:27:26 +0200:                     Naam                    : 'Time Machine-reservekopieën 2'
    2012-07-12 07:27:26 +0200:                     Grootte                    : 1,5 TB
    2012-07-12 07:27:26 +0200:                     Bestandssysteem          : Mac OS Uitgebreid (hoofdlettergevoelig, journaled)
    2012-07-12 07:27:26 +0200:
    2012-07-12 07:27:26 +0200: Partitiebewerkingen starten
    2012-07-12 07:27:50 +0200: Partitioneren mislukt voor schijf MacBook Pro van John.sparsebundle POSIX reports: De bewerking kan niet worden voltooid. Operation not supported by device
    THX for the resonse.
    With kind regards,
    John

Maybe you are looking for