Select a tray on printer OCE Vario 1200

Hi all,
How can I select a tray on an OCE Vario 2100 when printing from a smartform?
I tried to print the sample-text SAPSCRIPT-TRAYTEXT. This should take sheets from several tray's but it only used the default tray.
I tried putting printcommands TRY1, TRY2 and TRY3 in the smartform command-box. These printcommands are active in the printerdefinition. But the printer seems not to listen to these commands.
Does anybody have any ideas or experiences?
Best regards,
Tim van Steenbergen
Edited by: Tim van Steenbergen on Dec 17, 2007 3:42 PM

Hi,
There is a field in the attributes of your page called 'resource name', here you can specify the printer tray.
Regards,
Nick

Similar Messages

  • Select alternate tray when printing Adobe form from an ABAP prograram

    I had a Smart Form where I printed to an alternate tray for 4 by 7 paper stock.  I need to know how to do this in Adobe when printing a from from an ABAP program.  I have printer types ZLX4039, HPLJ4 and HPLJ5SI to which I need to print my form to an alternate 4 by 7 tray.
    Does anyone know how to set it up in the Adobe form and what I need to do in SPAD to handle it?
    Thanks for any help,
    James Ugrin

    Hi,
        Go for the Device type AZPL300 : ZPL300 for PDF Documents only for the Interactive Forms
    Take the Help of ur BASIS Team...in SPAD settings
    Regards,
    Vijaya Lakshmi.T
    Edited by: Vijaya Lakshmi on Mar 25, 2009 5:49 AM

  • Cannot select output tray on a stapler stacker using universal print drivers

    With universal print derivers 5.2, we cannot select output tray for print job on a stapler stacker.  All jobs are set to automatic output and only uses the lower tray, not other trays.

    Hi drlake,
    I understand that you are having issues with printing specialty paper/labels after updating your computer. It would be best if you posted your question on the HP Laser jet Commercial Site <here>.
    This would be the best place to find your answer.
    Thank you
    I worked on behalf of HP

  • Selecting the tray or the roll as the paper source for printing

    my printing machine is a canon ipf 5100.With Aperture 2 it was easy to select "tray" or "roll" in the printer driver.With Aperture 3 it is impossible because their is no such option in the Aperture 3 driver.I have tried to download the last version of the ipf 5100 printer driver but Aperture 3 doesn't take it.What can i do to recover my options "tray" or "roll" for my choice of paper?

    Your wording has me confused. You said you were unable to select tray or roll in the printer driver originally. I showed you where the roll selection is; if you do not select roll in the driver, then it will use tray for all the other selections are cut-sheet paper.
    You last message says you can only select roll in the printer. Make these selections on the computer from the print driver, not the physical printer.

  • My C410 is selecting the wrong tray to print my image

    I am trying to get a 5x7 image to print but the printer keeps selecting the photo tray which holds only 4x6 paper.  I have had this problem in the past with other print jobs.  I am using a Mac with os x Yosemite 10.10.1.  I have installed the updates available through the Apple update for HP.  I have selected the 5x7 paper size.  Not sure where to go from here.  Should be such an easy thing to do.

    I worked through your procedure.  My printer still works the same way.  I think it may be that the 5x7 paper can be loaded into the photo tray so it is selecting that tray automatically.  I wanted to print the 5x7 picture on larger 8.5 x 11 paper so maybe I have to show it on my screen that way.  I thought I should be able to select the tray that it feeds from but apparently that is not an option with this printer.  Thanks for your assistance however.

  • How do I get my 8600 premium printer to auto select between tray 1 and tray 2?

    How do I get my 8600 premium printer to auto select between tray 1 and tray 2? Right now, i have to pull out tray 1 to get the printer to feed tray 2.

    Hi Retrotriker,
    Follow the steps below to properly configure your paper trays.
    1. Touch (right arrow), touch Setup, touch Preferences, and then select Default Tray
    2. Select Tray 2 as the Default tray
    3. Open Printers and Faxes
    4. Right click on printer, and then select Printer Properties
    5. Click on Device Settings tab
    6. On this screen set the media type you have assigned to each tray (Example: tray 1 - Envelopes & Tray 2 - Letter)
    7. Click Apply, and then Ok
    8. When you have an envelope you are printing it will pull from Tray 1
    9. When you have a letter you are printing it will pull from Tray 2
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • How to print different pages of sap script  from diff. trays of printer

    Hi All,
    I have the requirement in SAP script. How to print different pages from different trays in the printer.
    For example  page 1 logo and address has to print from tray-1,
                        page 2 main data print from tray-2,
                        page 3 footer data print from tray-3.
    will appreciate if u come up with solutions asap.
    Thanks in advance.

    Hi,
    May be the links given below might help you,
    SAPScript:Selecting Different Tray in SAPscript
    Print to different output tray in SAPscript/Print Workbench
    Regards,
    Hema.
    Reward points if it is useful.

  • P3015 won't allow me to manually select paper tray on Mavericks

    Selecting 'Default' profile will print from Tray 2. This profile uses AUTO tray selection from the paper feed setup screen.
    Attempting to create a new profile cloned from 'Default', but with paper tray 2 explicitly selected results in printer 
    feeding from tray 1.
    Mavericks  10.9.2
    Printer Driver  HP PS 19.9
    Printer FW 07.100.6

    Hello jmcguckin,
    Welcome to the HP Forums.
    HP Technical Support, North America 1-800-474-6836. For all other regions click here.
    http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Printing with HP 1200

    Ever since I upgraded to 10.4.3, my HP Laserjet 1200 no longer appears in my printer list and I cannot use it. It is a workhorse of a printer and I see no reason to get rid of it for something newer. I have downloaded the hpijs driver and Ghostmatic from linuxprinting, but have no idea how to install it. The instructions are written in so much lingo that they are incomprehensible. They instruct to enter command lines but don't say where. They also suggest using the option key when adding a printer in Print Center, but in 10.4.3, Print Center is gone and the option key does nothing in the Printer Setup Utility. There has to be a simpler way or at least someone who speaks English. Any suggestions?
    G4 Mac OS X (10.4.3)

    Thanks for sticking with me. I have done this
    whole
    list repeatedly. It is at step 6 that the "Add"
    button is still gray. I will try to reinstall
    the
    printer setup utility.
    If you're stuck there, it's because Printer Setup
    Utility thinks that you haven't selected a
    printer,
    or that you haven't given it a name. Check and
    make
    sure that you've done both.
    OK. I have done everything on this list. I went to
    the advanced screen on the printer browser. I
    selected USB Printer from the Device menu. I named
    the device HP Laserjet 1200. I selected HP in the
    printer model menu. I selected the HP Laserjet 1200
    foomatic/hpijs from the drop down list, and the Add
    button will not activate. There is a field for
    Device URI that starts usb://. Do I need to enter
    something there?
    You don't, but the system does.
    For example, when I select 'advanced' with the option key down, Printer Setup Utility pops up a dialog which is a sub-level to the 'Printer Browser' dialog and which has at the top a pull-down menu which has the 'Advanced' item selected. Below that is another pull-down menu, named 'Device'. The last item on that menu is whichever USB-linked printer is currently connected and turned on. This should be your HP1200, if you have it connected by USB. Select that printer. (In my case it was my HP PSC1350 MFD.) If you can't select it, try the entry on that menu for 'USB Printer'. (Make sure that you held down the option key when clicking on 'More Printers'.) Below the Device pull-down menu should be a text entry box named 'Device Name'. If you successfully select a printer, the system will enter a name there for you. In my case, it entered ''psc 1300 series". Below that is the text entry box named 'Device URI', to which you referred. The system filled that in, too, with "usb://hp/psc%201300%20series?serial=<serialremoved>". Below that is a pull-down menu named 'Printer Model' which defaults to 'Generic'. When I pull down that menu and select HP from it, I get an additional selection box, from which I can select the driver "HP PSC 1300 Foomatic/hpijs" or the driver "HP PSC 1310 Foomatic/hpijs". I selected the 1300 driver, clicked on 'Add', and the system added the printer.
    I'd paste in a picture, except that Apple doesn't seem to allow attachments.
    email me at [email protected] and I'll send you a screen shot or two of what you should be getting.
    Apple, if you're listening... a pic is worth 1000 words...

  • I'm trying to print from a full size 30x42 pdf of an AutoCAD file.  I only want to print an 8 1/2 x 11 portion, in scale.  How do I select the window and print in scale on my 8 1/2 x 11 printer?

    I'm trying to print from a full-size, 30x42 pdf of an AutoCAD file.  I only want to print an 8 1/2 x 11 portion, in scale.  How do I select the window and print in scale on my 8 1/2 x 11 printer (Brother MFC-9340CDW)?

    You might be better off contacting an AutoCAD support group.

  • C6280: Can't select automatic two-sided printing

    Hi:
    I am using an HP laptop running Windows Vista 32-bit Home Premium.
    I had previously fully uninstalled my HP Photosmart C6280 all-in-one printer.
    Today, I reinstalled it using the CD-ROM that came with the printer.
    When I went to print an MS Word document, I was not presented with the normal set of
    Print options/settings to choose from.
    I could not select Automatic doubled-sided printing: it wasn't in the drop-down menu.
    When I selected Print from Word's File menu, a print dialog box opened: it's title was HP Photosmart 6200 Series Document Properties. From within this, I selected:
    Properties > Printing Shortcuts Tab > General Everyday Printing.
    in the lower right area of this panel, is a drop-down menu titled, "Print on both sides".
    It offered the following options to select from:
    Off, Manual, Left-edge booklet, Right-edge booklet.
    The option, "Automatic" was missing from this list: previously, it was directly below Manual.
    I do not remember if the Left/Right edge options were there before.
    Directly below this drop-down menu is that for selecting Orientation: Portrait or Landscape.
    So now, I am unable to do automatic 2-sided printing.
    If I click on Duplex instead of General Everyday , I briefly see the word Automatic in the menu, but is replaced with Manual. Also, for this Duplex mode, the Orientation drop-down me u is missing/hidden. I do not know if it is supposed to be that way.
    The Problem: Why do I no longer have the option to do Automatic 2-sided printing ?
    Any ideas ?
    Thanks
    DaleBr
    This question was solved.
    View Solution.

    The duplexer needs to be enabled in the driver as discussed in the Vista/Win 7 Duplex Printing Troubleshooting Guide here.  
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How to Expand/Collapse Select Option Tray

    Hi,
    I have a View in which I have dynamically created a select-option Tray and then added select-options within the Tray using:
    DATA lr_cost_ctr            TYPE REF TO data.
    DATA lr_interfacecontroller TYPE REF TO iwci_wdr_select_options.
    DATA lr_select_options      TYPE REF TO if_wd_select_options.
    * Initialise the selection screen.
      lr_interfacecontroller = wd_this->wd_cpifc_select_options_search( ).
      lr_select_options =
               lr_interfacecontroller->init_selection_screen( ).
    * Add a tray.
      lr_select_options->add_block(
        i_id           = 'TRY_ACCT_***'
        i_block_type   = if_wd_select_options=>mc_block_type_tray
        i_title        = 'Account Assignment' ).
    * Add a Select Option.
      lr_cost_ctr = lr_select_options->create_range_table( 'KOSTL' ).
      lr_select_options->add_selection_field(
        i_id              = 'COST_CTR'
        i_within_block    = 'TRY_ACCT_***'
        it_result         = lr_cost_ctr ).
    This works fine, but how do I dynamically expand and collapse the select-option Tray ?  There are plenty of examples for expanding/collapsing normal Trays by binding the "expanded" attribute at design time or dynamically.  But with a Tray created as a select-option block I do not have a reference to the Tray.
    I have searched high and low but cannot find how to do this.
    I don't want to create the Tray at design time because there will be select-options above and within the Tray.
    Any help will be appreciated.
    Thanks & regards,
    Grogan

    Hi,
    My Approch is:
    ---Initially set the webBean property in processReq
    Hgrid.setAutoQuery(false);
    ---On Button click navigate to the same page n set the webBean properties..
    put var in session.
    pageContext.forwardImmediatelyToCurrentPage(null, true, null);
    ---in process req get teh value of var from session.
    if(pageContext.getSessionValue(var)!= null)
    Hgrid.setAutoQuery(true);
    Hope it will helps..:)
    Note:
    ---We cant modify the webBean properties in processformReq and processformdata.
    Regards
    Meher Irk

  • How to enable selection or pages to print just portions of a website. Only all is active.

     A few days ago I posted a question "how do I  enable "selection or pages" to print just portions of a website. Only "all" is active. I received an email from the Canon Community that said Click here to view the reply but it just brings up "error 404 page not found." In internet explorer they're active but not in Google. Any ideas? I'm using Windows 7. Thanks in advance

    For ease of updating and publish it is better to build all your sites on separate domain files.....
    http://iwebfaq.org/site/iWebMultiplewebsites.html
    When publishing to MobileMe its not so easy to not publish a page or two.
    What you can do is create a second site on the same domain file and drag the pages you don't want to be seen down to this. They will be published but will not be seen on the website as their files will be in a different folder in Finder/Go/iDisk/My iDisk/Web/Sites.
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • I am now unable to print pdf documents. The message on screen says I have not selected any pages to print, even though the bullet point saying 'All' pages  has been clicked. I have recently upgraded to adobe reader XI, could that be the problem? I also ca

    I am now unable to print pdf documents. The message on screen says I have not selected any pages to print, even though the bullet point saying 'All' pages  has been clicked. I have recently upgraded to adobe reader XI, could that be the problem? I also cannot sign in to Adobe Export pdf now either. It says 'error occured while signing in'!

    Open Adobe Reader | Edit | Preferences | Documents: change View Documents in PDF/A Mode to Never.
    Regarding the ExportPDF problem, please start a new topic in the ExportPDF forum.

  • Notes won't let me export all my notes at once. I have to select each one and print/export them. Is there a way to select all and have them export as a PDF?

    Notes -Export Question:I have to select each Note  and print/export them. Is there a way to select all the notes and have them export as a PDF

    http://www.igeeksblog.com/export-notes-in-mac-os-x/
    A friend found this for me, I searched SO MANY HOURS but somehow never found this on my own. I love it. It's a download of an app called "Notes Exporter" YAY

Maybe you are looking for