Select All Following Of Same Track ... odd

I don't quite understand this:
I want to select all the clips to the right of cursor on a single track. But this command: Edit > Select All Of Same Track -- selects all the clips to the right of the cursor BUT ONE! Meaning, the first clip after the cursor is NOT selected. I don't get the Logic of this (excuse the pun). Or is there some other keystroke in Logic that will let me do something similar to FCP (where one hits the T key to select all the clips before or after the cursor on a single track of the timeline).
I'm editing a monster voice-over ... any help would be MOST appreciated...
Thank you,
Ben

Thank you most kindly Christian,
I've got to learn to think in terms of regions, instead of clips. And to NOT look for parallels with FCP.
This makes me a very happy camper.
Much appreciated...
Ben
Oh, and is there any way to select in the opposite direction, like all the regions BEFORE the region I've highlighted? That would be most useful too.

Similar Messages

  • Logic pro New select all following

    Hey I used to use select all following a lot , now i only see select all following in same track .
    is that feature just hidden or removed ? Id hate to hear its no longer possible
    side note wheres the new manual ?
    Message was edited by: Theodore Becker reason typos

    I'm not at my studio to check but I also use it quite frequently and so I assigned it to the "f" key on my computer keyboard. If they removed it from the edit menu list I wouldn't have noticed since I just hit the letter "f". I think it used to be clustered in upper of the 2 groups of "select" commands in the local edit menu.

  • Can Garageband NOT select all regions on a track when I select the track???

    I'm recording audio on 2 tracks. When I switch from one track to the other, it doesn't look like anything's selected because all the other regions are off the screen to the right. If I record a quick region and then delete it, EVERYTHING ON THAT TRACK GETS DELETED because it's automatically selected.
    So ... where is the setting in Garageband that lets you select a track without selecting all the regions on it?

    When you select a track, it automatically selects all of the regions in the track, which I think is silly.
    Only, you cannot avoid it. It is built in. So deselect the regions afterwards by clicking some empty space in the track.
    Write feedback to Apple with a feature request, that you want it changed:
    http://www.apple.com/feedback/garageband.html

  • A parameter that filters and also 'Select ALL' at the same time

    Hi All,
    I have a situation
    1. I have a parameter @Param1 that accepts multiple values
    2. I have to display data based on selected values of @Param1 
    Here comes the tricky part.
    3. I have to aggregate on all the available values of the @Param1
    Can any body help me in this. 
    Do i need to take a hidden parameter just for aggregation?or is there any other way?
    Any suggestion is very helpful to me.

    Hi gangarocks,
    Based on my understanding, you want to create a multivalued parameter to filter the report, then display the selected values in the report, right?
    In your scenario, you could specify a report parameter and give available values. Then add a filter based on the parameter in the main dataset. You could add a textbox and specify the expression using Join() function. Please refer to steps below:
    1. Add a report parameter, select the “Allow multiple values” in General tab. On Available Values tab, you could check "Specify values" or "Get values from a query".
    2. In the main dataset, go to Filters tab, add a filter like below:
    3. Add an expression like below, then preview the report.
    Reference:
    Add a multi-value parameter to a Report
    SQL Server Reporting Services Using Multi-value Parameters
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • New Ringtones all export as same name and song even though they are diff?

    Ive created ringtones via the rename to m4r method, and has been working fine. Ive got 3 that I created some months back , but this weekend I tried to add another 3. These created fine, and if copied to phone indiviudaly work fine.
    However the moment I add more then 1 to my phone, all get labeled the same on my iphone and all play the same track. The tones I created a while back work fine, have tried various combinations of copying 1, 2 or 3 tones over but its only these new ones that are causing the problem.
    Any one experience anything similar or have any advice?
    thanks

    A couple of things to check.
    Open itunes and connect the iphone to the computer
    If the iphone is set to manually manage, uncheck the box to manually manage.
    Go to the ringtones tab and uncheck sync ringtones checkbox.
    Now click apply in the bottom right corner.
    Once the sync is complete, check the box to sync ringtones to the iphone and choose all ringtones.
    Click apply again to sync the ringtones to the iphone.
    If the auto sync does not work, you might need to restore the iphone and set up as new iphone.
    Here are a couple of articles from the apple support website that might help out.
    http://docs.info.apple.com/article.html?artnum=305740
    http://docs.info.apple.com/article.html?artnum=305744
    Hope this helps.

  • Unable to select all

    When I go to edit, select all, only the active track is selected it will not select the other layers, therefore it will not render.

    Are the other layers in the Background area below the grey divider on the Timeline?
    If so, you have to activate the checkbox for *Render Background* from Edit > Project Properties -it is off by default.
    You shouldn't have to use Select All to render a movie or save the project file.
    The purple and blue tracks in the illustration below are in the background area:

  • Selecting all "error" tracks

    An awful lot of my tracks (hundreds, maybe thousands) are showing up twice in iTunes, one copy of each with an error ("!" in a grey circle) icon by the side, all because I've changed the location of my MP3 folder and reimported the tracks back into iTunes. Holding down CTRL and clicking each one individually, then pressing DELETE is driving me crazy as you would expect, so is there an easy way to select all tracks which have an error status?
    Dell Dimension Windows XP

    Go to my iTunes scripts page and follow the link there for downloading Perl (if you don't have it already). Install Perl, and then download and run my itunesremovenotfound.pl script (by double-clicking on the downloaded file) to remove the tracks with !. Select the Library (number 1) when prompted.
    NOTE: the script will run MUCH faster if, in iTunes, you select a DIFFERENT playlist to view than the Library.

  • Selecting all consecutive paragraphs of the same style in GREP?

    Hello,
    Is there anyway to select all consecutive paragraphs of the same style using GREP and append something after it?
    My problem is that I need to add a tag to the start and end of all footnote sections, they are not embedded in InDesign, but rather they are simply listed after every section. I've managed to add the tag to the start of every footnote section but how can I use GREP to select all of the footnotes and add the tag after it?
    I have tried (among others)
    (.+)
    but it only finds each footnote one at a time, rather than the whole section's worth of them.
    Leaving the Find field blank and just using Find Format will find the whole section but I can't find anyway to append the tag. I tried
    $0\rTAG
    but it seems to cut a lot of the footnotes out randomly?
    There must be a way to do this?

    It's possible to have a GREP span multiple paragraphs (use the flag (?s) for this), but I think it would have the same result as your 2nd try, just supplying the paragraph style name. Since that fails, I suspect it's just too much text to fit in '$0'.
    How about circumventing the problem in its entirety? Put your paragraph style name in the Find Formatting field, then search for
    \r(?!.)
    -- this will find the very last hard return in that style "followed by nothing". You can replace it with
    \rTAG\r
    -- it needs a return right after 'TAG' because otherwise this will be pasted in front of the next (unrelated) paragraph.

  • I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. How can I fix this?

    I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. Can I fix this?

    I'm fairly new to this, but I think it has to do with the way you have the drop downs named. Did you copy one then keep pasting it in each field? If so, that is the problem. You should rename each one with a different number: Dropdown1, Dropdown2, etc. I think that might solve the issue.

  • How do you select all paragraphs using the same style in Pages 5.2?

    I'm trying to find how to select all paragraphs using the same style in Pages 5.2 without any success.  I writing a book and I need to able to adjust all my paragraph styles globally.  I see how upgrade my paragraph style when I do something new, but not how to revert back to the orginal template.
    For example, in my custom template for my book I have 12 font for a review questions paragraph style.  I changed the font size for all this paragraph style to 18 font.  Now I want to change it back to size 12 font.  But I have this paragraph style at the top and bottom of my document.  How to I select all of my review questions style so I can make the font change to all at the same time? 
    I just upgrade to Pages 5.2 from Pages '09. 
    Thanks for the help,
    Rob

    The Pages User Guide might help here.
    Better to post your topic in the Pages designated community > Pages: iWork: Apple Support Communities

  • "all my music is unchecked.  I can not check whole playlists by using the top checkmark to select all.  I went to all my playlists, same thing.  I can only press them ONE at a time, which will take about a day to check all of them." Please help.Windows7

    "While in MY MUSIC on itunes, all my music is unchecked.  I can not check whole playlists by using the top checkmark to select all.  I went to all my playlists, same thing.  I can only press them ONE at a time, which will take about a day to check all of them.
    any ideas?  anyone have same problem?  This just happened since last update." I have windows7

    Thanks A Lot! I should have clicked: "This solved my question" But Thanks all the same!

  • I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and I find it very annoying.

    I used to give my photo's keywords. Most of the time I have several photo's for the same keyword and it was possible to select all those photo's and give them the keyword in one move. Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?

    . Since of few weeks I can't do that anymore and it's very annoying. What can I do to get back to the former situation?
    Check, if you have the "Primary Only" option enabled. Then keywords will only be applied to the "Primary Image":
    See:                  Keywords or ratings are applied only to one of the selected images - why?
    Uncheck the little square button with the "1".

  • I am using the trial version of CC and cannot get the auto blend layers working despite following many videos on youtube etc. I have selected all layers but no matter which order I select etc all I get is an output of the first file in the stack - help!!

    I am using the trial version of CC and cannot get the auto blend layers working despite following many videos on youtube etc. I have selected all layers but no matter which order I select etc all I get is an output of the first file in the stack - help!!

    <moved from Adobe Creative Cloud to Photoshop General Discussion>

  • Selecting all Automation data in a track.

    I'm working on a complex mix and I want to select all automation data in a track.
    I don't know the way. Can any guy to help me?

    Thanx a lot Data Stream Studio!
    Searching found this.
    We can move all Volume automation data up or down, by holding pressed Alt key and Click-hold on first node. Then drag
    up or down.

  • Itunes will not create a blank library, it creates a new library with all of my same content from the other library. I followed the instructions but itunes will not give me a blank library???

    I have looked up how to create the new blank itunes library and every site has the same copy and pasted instructions. They are simple but have no troubleshooting solutions. It creates my wifes new library with all of the same content from my library. How can I make the whole thing blank so I can sync her new device without putting all of my stuff on there?

    Having opened the supposedly blank library go to Edit > Preferences > Store and untick Show iTunes in the Cloud purchases. Should clear things up.
    tt2

Maybe you are looking for