Select All only selects the body or header, not both, in Mail

I'm nearly certain that in Mail under 10.4, with the cursor or a selection made in an incoming mail message body, Select All selected both the body and the header, which I use a lot for copying and pasting into other apps. In 10.5, only the body text is selected. Doesn't matter if the message is viewed in the view pane, or popped open. I don't see anything in prefs to change the behavior. Is it possible to have the header selected along with the body text without viewing the message with Long Headers chosen?
Bob

Not directly, but you can do what you want this way: click on "Forward" and a new email will come up with both the headers and the text of the message, so you can copy from there and then just close the forwarding email without sending or saving.
If you don't want the message indented, turn off the "indent" and "increase indent" checkboxes in Mail>Preferences>Composing

Similar Messages

  • SQL query problem:  how tp select all duplication in the table?

    Hi all,
    I have a table with the following columns:
    1. contact_id
    2. fname
    3. lname
    4. email
    The email column must be unique (unfortunately it's not); therefore, I have to delete all duplication in the system.
    Question: how can I select all duplication in the table?
    I tried this...didn't work (I'm expecting only the emails that are duplicated)
    THANK YOU!
    SELECT distinct TC1.email, TC1.contact_ID FROM ta_contacts AS TC1 where TC1.email <>'' AND TC1.email not in (   SELECT distinct TC2.email   FROM ta_contacts AS TC2   where TC2.email <>'' )

    Sounds like an SQL and not a JDBC question. In any case, if a column needs to be unique, then you should, of course, designate a unique constraint on the table so you never end up with duplicates in the first place.

  • How do you select all paragraphs using the same style in Pages 5.2?

    I'm trying to find how to select all paragraphs using the same style in Pages 5.2 without any success.  I writing a book and I need to able to adjust all my paragraph styles globally.  I see how upgrade my paragraph style when I do something new, but not how to revert back to the orginal template.
    For example, in my custom template for my book I have 12 font for a review questions paragraph style.  I changed the font size for all this paragraph style to 18 font.  Now I want to change it back to size 12 font.  But I have this paragraph style at the top and bottom of my document.  How to I select all of my review questions style so I can make the font change to all at the same time? 
    I just upgrade to Pages 5.2 from Pages '09. 
    Thanks for the help,
    Rob

    The Pages User Guide might help here.
    Better to post your topic in the Pages designated community > Pages: iWork: Apple Support Communities

  • How to select all files from the application server.

    Hi all,
    I have  a requirement to select all files with the same file format I.e i have created no of files with same name but different time stamps addition , now i want to select all the fiels and read the data into an internal table and sort them on the user requirement,  I am using FM -
    /SAPDMC/LSM_F4_SERVER_FILE to get single file name, i should also give the option on the  selection screen for the user to select the file range I.e form which to which the sorting should be done.
    could anybody suggest me the function module which selects all the file names .
    Regards,
    Sre.
    Edited by: Alvaro Tejada Galindo on Mar 10, 2008 4:49 PM

    Hi,
    PARAMETER: p_fdir type pfeflnamel DEFAULT '/usr/sap/tmp'.
    data: begin of it_filedir occurs 10.
    include structure salfldir.
    data: end of it_filedir.
    *START-OF-SELECTION
    START-OF-SELECTION.
    Get Current Directory Listing for OUT Dir
    call function 'RZL_READ_DIR_LOCAL'
    exporting
    name = p_fdir
    tables
    file_tbl = it_filedir.
    List of files are contained within table it_filedir
    loop at it_filedir.
    write: / it_filedir-NAME.
    endloop.
    Regards,
    Omkaram.

  • What is the shortcut key to select all documents in the book panel?

    What is the shortcut/hotkey to select all documents in the book panel?

    I don't believe there is a keyboard shortcut available for that feature. But I believe if you click-select the topmost chapter, and Shift-click the bottommost chapter, it should select them all.
    Other shortcuts for books can be set up in Edit > Keyboard Shortcuts in the Panel Menus product area. There are no default shortcuts in that area.

  • When making a book, one of my photos selected appears only on the flap, how can I get it to be in the book also?

    1.  When making a book using Iphoto, one of my photos selected appears only on the back flap, how can I get it to be in the book also? I added an extra page thinking that would help, didn't! 
    2.  It says that you can photos anytime, can I add a photo that I did not select originally without starting completely over?
    ...any suggesstions for both problems would be appreciated. Thanks

    you can use a photo many time is the same book - simply drag it from the photo strip to the photo frame you want it in - even though you have used it before you can still use it again
    And adding photos is easy - go to the photo (in an album, event or photo view) and drag the photo(s) to the book under keepsakes - it will now be available to use
    LN

  • Is there a "Select all keyframes to the right" command?

    Say in a 16 minute composition, you want to select keyframes from 5 minutes to 16 minutes and shift them earlier in the timeline. Keyframes from 0 to 5 minutes do not change. Can you select multiple keyframes to the right of 5 minutes like this? Perhaps a similar command like in Final Cut pro where you're able to select all clips to the right of your playhead.
    Thanks

    Don't believe you can select all keyframes forward.
    I take it the trick to select groups of keyframes - marquee-dragging - in the Keyframe Editor won't work for you here? Holding down Shift should constrain you to moving backwards and forwards in the timeline (and not, accidently, altering your actual values), in case that helps any...

  • I bought a movie on iTunes and when it loads up I can only play the bonus features and not the actual film. The title screen is also glitched and merges with the scene selection. I don't think it downloaded properly. what can I do?

    I bought a movie on iTunes and when it loads up I can only play the bonus features and not the actual film. The title screen is also glitched and merges with the scene selection. I don't think it downloaded properly. what can I do?

    It happens sometimes. Delete the current copies, don't hide from iTunes in the cloud if prompted, close iTunes, reopen, download from iTunes Store > Quicklinks > Purchased > Music > Not on this computer.
    While downloading click the download icon at the top right and uncheck Enable simultaneous downloads. You may find it more reliable that way.
    tt2

  • I cant select all files with the new update

    I cant select all files with the new itunes update

    Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
    http://www.apple.com/itunes/download/

  • Select all / Delete selection Translation

    Hi,
    although I am running my Web Dynpro ABAP in Swedish the "Select all / Delete selection" table options are displayed in English. Anyone who knows whether or not this is a bug or a known limitation ... or perhaps something that I can fix?
    Thanks!

    Hi Peter,
    I still do not understand why all the other standard functionalities are translated but not "Select all/Delete selection". Could you be a little more specific how/what you mean with domain translation?
    Thanks!

  • I have 5 devices all on one itune account.i have not activated icloud because i dont want it to sync all our information together. is there a way to set it up to only sync the music together and not the contacts photos messages etc

    i have 5 devices all on one itune account.i have not activated icloud because i dont want it to sync all our information together. is there a way to set it up to only sync the music together and not the contacts photos messages etc

    Unless you subscribe to iTunes Match, iCloud doesn't sync music.  Just set up every person's devices on a separate iCloud account and your iCloud data and photo stream will remain separated.  Each iCloud account will need a separate ID, but it does not need to be the same as your iTunes ID.  You can continue to share the same iTunes ID and maintain separate iCloud accounts with separate IDs for iCloud.
    You'll also want to use separate IDs for each person for iMessage and FaceTime.  This will keep your text messages and FaceTime called separated as well.  The easiest way to do this is to have everyone use their iCloud ID for these two services as well.

  • How can I restore my data from iCal? I didn't make any backup, but I use  time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

    How can I restore my data from iCal? I didn't make any backup, but I use  time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

    So what is your question?
    If you forgot your encryption password:
    Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
    If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
    The above comes from here:
    http://support.apple.com/kb/HT4946

  • In Textedit, how do I copy a hyperlink url, but only copy the link location and not the link text?

    Suppose I have a list of hyperlinked internet URL's. I want to extract their Internet addresses -- the link locations --  which are essentially hidden in the link text. Is there any way to select and copy the list of hyperlinks, but only copy the link locations, and not the link text?
    For example, with the links:
    The White House
    Google
    One of my previous posts
    What I really want to copy are: "http://www.whitehouse.gov/", "http://www.google.com/", and "https://discussions.apple.com/thread/2737556".

    I figured out how to do it. First, copy the hyperlinks onto a blank RTF document in TextEdit and save the file.
    Second, open the file from within TextEdit, and make sure that the box "Ignore rich text commands" is checked in the open file dialog box. In the open document, the hyperlinks from my example in my first post will look like this:
    {\rtf1\ansi\ansicpg1252\cocoartf1038\cocoasubrtf360
    {\fonttbl\f0\froman\fcharset0 Times-Roman;}
    {\colortbl;\red255\green255\blue255;\red0\green7\blue232;}
    {\info
    {\author Garald P. Weller}
    {\*\copyright Garald P. Weller}}\margl1440\margr1440\vieww20000\viewh14400\viewkind0
    \deftab720
    \pard\pardeftab720\sa240\ql\qnatural
    \f0\fs24 \cf0 \
    \pard\pardeftab720\sa240\ql\qnatural
    {\field{\*\fldinst{HYPERLINK "http://www.whitehouse.gov/"}}{\fldrslt \cf2 \ul \ulc2 The White House}}\
    \pard\pardeftab720\sa240\ql\qnatural
    {\field{\*\fldinst{HYPERLINK "http://www.google.com/"}}{\fldrslt \cf2 \ul \ulc2 Google}}\
    \pard\pardeftab720\sa240\ql\qnatural
    {\field{\*\fldinst{HYPERLINK "https://discussions.apple.com/thread/2737556"}}{\fldrslt \cf2 \ul \ulc2 One of my previous posts}}\
    Third, use the Automator function, "Get URLs From Text," to create a service, which I called "Get URLs From Text," that receives text from any window, gets the URLs, and copies the result to the clipboard:
    Fourth, select the entire page above, and go to TextEdit > Services to activate the "Get URLs" service.
    Fifth, create a new TextEdit document, and paste the result.
    The output is exactly what I wanted, the URLs -- i.e., the link locations -- of the three web pages, without the link text.
    Another utility that will extract URLs is CopyPaste Pro, which has an innate ability to extract Internet addresses from either web pages or text pages.

  • I have a Rocketfish mini display port to VGA adaptor cord for a macbook pro, it was working fine the first week, now it does not show what I am seeing on my laptop on my lg Flat screen tv. It only shows the space background but not any icons. Any help??

    Is there anything I should do to the TV or any settings i should do from my actual Macbook? It only shows the space background but not any of my icons or what i am seeing on my laptop screen. It is a new adaptor which was purchased last week.

    It seems as though though it may be a connection issue, possibly hardware or adapter. Make certain the connections are TIGHT.
    For software you may try a smc reset:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    Try a pram reset:
    Shut down your Mac.
    Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on your Mac.
    Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
    Release the keys.
    If no joy you can take it in to an Apple store genius bar for a free evaluation make an appointment first.
    http://www.apple.com/retail/geniusbar/

  • Need to backup and remove photo library form my iphone.  This library was previously backup on a hard drive that crashed.  So these photos are only in the photo library and not in the camera roll.  If I do a full backup, it only takes the camera roll.

    Need to backup and remove photo library from my iphone.  This library was previously backup on a hard drive that crashed.  So these photos are only in the photo library and not in the camera roll.  If I do a full backup, it only takes the camera roll.
    So this is a 2 part question:
    1) how to I backup the Photo Library to my new hard drive (as the last one was unrecoverable but previously backed up)
    2) how do I remove the Photo Library form my phone (preferably after backup in item 1)
    Thanks, Janis

    Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer.  As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
    You can try and find 3rd party applications that might help you.  I'm sure you'll pay, however.
    Let this be a very important lesson learned.
    Best.

Maybe you are looking for