Select audio between time markers?

After importing audio in Soundtrack Pro I divide it in parts by placing time markers. Then, in order to save these parts separately I select the audio between two successive time markers.
Allthough it is easy to place the cursor at a time marker (shift-M or option-M), I did not find a shortcut for selecting the material to the next marker onwards. I find it a bit cumbersome to move with the slider to that marker and than shift-click for selection (often loosing the starting point by a false click .
Thus, can one select from one time marker to the next with a shortcut, or isn't that possible?
Hans van der Meer

Click & drag on the bar beneith the 2 markers to make the area into a timeslice.
Dave

Similar Messages

"Silence Selected Clips in Time Selection" working erratically in Audition CC for OS X

I am working on a multitrack audio file and using the "Silence Selected Clips in Time Selection" to quiet any background noise between pauses. 60-75% or the time it's working fine but the other 25-40% of the time it reacts in a super odd way and takes all of the markers it makes down to -∞ db and I have to fix it myself. I also should note that I am using Synergy to share the keyboard and mouse across screens (in case it is a stuck key issue or something). What is causing this, is it something I can fix?

I have tried it in both Windows 7 and OS X and with and without the mouse sharing software, and with snapping both on and off. Maybe of note is that there are parts that I have silenced and then cut out part of after the fact, I'm not sure if that would affect it or not. Also, just in case it wasn't clear, I am doing this in multitrack view. Here's an example of some of the cuts:

CS6: exporting "range of time markers" without setting in-/out point or defining working area?

Hi,
in CS6 I defined several "range of time markers" to get a better overview of my project. Now I want to export each range as a single video.
The only way to do this is creating in-/out points or setting the working area (what is the English translation for "Arbeitsbereichsleiste" (German)...?)?
Or is it possible to define this selections via the previous created range of time markers? That would be the easiest way...
Thanks, Carlos

For exporting chunks of the Timeline, I set a Work Area and then export. If you want to export between markers, that would be a feature request: http://www.adobe.com/go/wish

Urgent - I have written select query between loop and endloop, Ple help out

Can any one help out me on this select query. I have written select query between loop and endloop. When I execute the program it will take too much time in this query. Please help me out. Its very urgent.
LOOP AT l_i_invoices ASSIGNING <l_invoices>.
      CLEAR alv_wa.
      alv_wa-bukrs = <l_invoices>-bukrs.
      alv_wa-gsber = <l_invoices>-gsber.
      CLEAR l_instid.
      CONCATENATE <l_invoices>-belnr <l_invoices>-gjahr INTO l_instid.
      SELECT top_wi_id FROM sww_wi2obj INTO TABLE l_i_swwwihead
              WHERE catid   = c_catid_business_object
                AND instid = l_instid
                AND typeid = c_typeid_invoice
                AND removed = space
                AND ( wi_rh_task = c_task_buyer_message
                   OR wi_rh_task = c_task_buyer_message2 ).
      IF sy-subrc = 0.
        <l_invoices>-flag = 'X'.
      ELSE.
        <l_invoices>-flag = ' '.
      ENDIF.
      MODIFY l_i_invoices FROM <l_invoices> TRANSPORTING flag
                            WHERE belnr = <l_invoices>-belnr
                               AND gjahr = <l_invoices>-gjahr.
      APPEND alv_wa TO i_alv.
    ENDLOOP.
Thanks in advance.

Here is a way to solve this problem.
Choose somewhere before this loop processing to use that select. Therefore, you'll need use FOR ALL ENTRIES <that_loop_table> clause, and in the WHERE condition you need to specify that same fields.
This way, you will have an internal table with all data you'll need to check.
Then, inside your loop statement, use the READ TABLE command with the clause WITH KEY field = value, to read that record and use the value found.
Like this sample:
SELECT bukrs lifnr umsks umskz augdt augbl zuonr gjahr belnr buzei
         waers xblnr blart gsber ebeln zfbdt zbd1t zlsch
INTO TABLE tg_bsak
FROM bsak
FOR ALL ENTRIES IN tl_bkpf_sel
WHERE bukrs EQ tl_bkpf_sel-bukrs AND
        lifnr IN s_lifnr AND
        augbl EQ tl_bkpf_sel-belnr.
LOOP AT tg_bseg INTO wa_bseg.
    READ TABLE tg_bsak INTO wa_bsak WITH KEY bukrs = wa_bseg-bukrs
                                             gjahr = wa_bseg-gjahr
                                             belnr = wa_bseg-belnr
                                             BINARY SEARCH.
if sy-subrc = 0.
* do something
endif.
ENDLOOP.

Difference between Time dimension and product(regular) dimenstion

Hi All,
I would like to know what is the difference between time dimenstiona and regular dimenstion. How can we differentiate and how Oracle bi server knows a dimension
as Time dimenstion.
Thanks,

Hi,
By using Logical Dimensional Structure and chronological keys it identify time or other types of dim.
Just double clik time dimension then you can find the
root type (Time, Ragged and skipped) and for the chronological keys > just double click logical level then select keys tab -- here u can find chronological keys
Thanks
Deva

The difference between chapter markers and dvd studio pro markers

Does anyone know what is the difference between chapter markers and dvd studio pro markers? I can not find anywhere on Google. Also in the tutorials I have seen, suggesting DVD Studio Pro markers, but it did not mention the chapter markers.
Thanks,

"Adding Chapter and Compression Markers to Your Sequence
Once you have your edited sequence or program finished, you can add markers to the sequence for use on DVD. Markers are reference points you can place within clips or sequences that identify specific frames. There are two kinds of markers you can add that directly relate to authoring a DVD—chapter markers and compression markers.
• Chapter markers allow DVD authoring applications to create a navigable chapter list for your exported QuickTime movie. Chapter markers force MPEG keyframes (known as I-frames) at their location, since the DVD specification requires an I-frame at each chapter point.
• Compression markers identify areas of abrupt change and include two types: those that are automatically inserted by Final Cut Pro at all edit points, and those you manually place in the clip or sequence. Like chapter markers, compression markers force I-frames at their location, although in this case it is for better quality encoding, and they are not used to create a chapter list.
Note: When you export a QuickTime movie, you have an option to export various kinds of markers, including compression, chapter, or DVD Studio Pro markers. *When you choose to export DVD Studio Pro markers, Final Cut Pro actually exports chapter markers and all compression markers.* This includes compression markers you set manually, as well as ones created automatically by Final Cut Pro at edit and transition points."
From the Final Cut Pro User Manual.
So, JS was right the first time

Using iOS 7 on my iPad, is there a way to put an event into the calendar without having to scroll down to calendar and select "home" every time? My friend's iPad retains that setting but mine doesn't .

Using ios7 on my iPad, is there any way to enter a calendar event without having to scroll down to calendar and selecting "home" every time? My friend's retains that setting, bu mine won't .

Settings>Mail, Contacts & Calendar
Scroll till you see calendar and set default calendar to the one you want.

Error message: "the previously selected audio interface is not available"

HELP?!?!?!?!?
I'm stuck, and I can't go forward. Here's my issue:
I've bought a Focusrite Saffire LE, a simple firewire audio interface, for use with my Logic Express 7 (with all the latest updates). I run the setup assistant and select my saffire as the audio interface to use, and then when logic runs I get the message "the previously selected audio interface is not available" and it defaults to my Macbook Pro's internal microphone and speakers.
Just for sanity I've tested the audio interface with garageband and it's fine. My other audio apps aso run fine using the saffire as the audio interface. The setup assistant for logic has no problem finding the saffire, so why does it get rejected as soon as logic starts?!?!?
Please - this is driving me crazy.

I asked Focusrite for some help, and they said it should work (which I knew) and made some suggestions. Here's their email:
"Saffire LE should work fine in Logic Express.
Try resetting your logic preferences. Go to Logic > preferences > initialise all except key commands.
Do you still have the same problem?
Do you have any other firewire devices attached?
Have you had any other interfaces installed in the past?"
All good suggestions, but so far no luck.
Has someone else got the same config as me? (15" Macbook Pro and focusrite saffire le)?

My macbook is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page what do i do?

My macbook Pro is stuck on a grey screen with language select and every time i click english it brings me back to the same gray page with language select what do i do? Also i dont have enough monet to go to the apple store to get it fix and another thing this happen after i tried to factory reset it without the disck uising coomans i found on youtube.Lastly befor doing the comands my macbook would open any applications and the finder would just blink on and off on the dock.
Heres the link http://www.youtube.com/watch?v=Q5e5thk0O9o

Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Leopard - This will install a "fresh" copy Leopard without archiving old system files but leaves the rest of your files in place.
If you still want to restore your computer to factory level...
Start up from your install disc, go to Disk Utility and select the disk and click erase - to securely erase data click Security Options and Erase Free Space which will entirely wipe your disk, overwriting it with zeros so that no data is recoverable.
To restore read the instructions in the Mac OS X v10.5 Leopard - Installation and Setup Guide PDF

I have one imac. my wife and i each have our own user accounts and itunes library. How do we share selected music between user accounts?

i have one imac. my wife and i each have our own user accounts and itunes library. How do we share selected music between user accounts?

To give other users read-only access to your library, use the Sharing features of iTunes. Sharing works over the local network as well as on the same computer. See the built-in help for details.
If you want to give full read/write access to more than one user, see the support article linked below.
iTunes: How to share music between different accounts on a single computer

Select option in time using oracle

i attach an excel file in oracle, i have a time field in my table, i give the select option in time ie, i select the time 4:00:00 - 6:00:00 in that time period data will display,
for example html format ie, output format.

Hi
No!
U need to find a way to convert a range of select-option to a range for Native SQL, probably it should be better doesn't use a select-option for the date but two parameters: one for date from and one for date to.
Max

What's the difference between time capsule and time machine?

What is the difference between time capsule and time machine?

See Using Time Machine with a Time Capsule.

Creating SELECT query between 3 tables

Hi there,
Im trying to create a SELECT query between 3 tables and it is driving me round the bend.
I have 3 tables connected together which are:
MODUL
modulid
modulname
modulevel
STUDENT
studentid
surname
inits
s e x
phone
email
logon
STUDREGOCCUR
modulid
acyear
semester
occletter
studentid
result
I want to select the fields surname, inits, studentid from the STUDENT table, modulname from the MODUL table and result from my STUDREGOCCUR table that is NOT NULL.
I have tried SELECT STUDENT.STUDENTID, STUDENT.INITS, STUDENT.SURNAME, MODUL.MODULNAME, STUDREGOCCUR.RESULT WHERE STUDREGOCCUR.RESULT IS NOT NULL;
I have also tried many other ways and done research hwich hasnt really helped me unfortunately.
Im quite new to SELECT queries and im not sure where im going wrong, i would greatly appreciate if someone could help me solve my problem.
Thanks for the help :)
Edited by: user633643 on 06-Dec-2008 08:09

If you want data from multiple tables you would need to perform a join. The general form would be:
select t1.cola, t2.col2, t3.col.x
from table_a a, table_b b, table_c c
where a.key = b.key
and b.key = c.key
or perhaps c relates back directly to a so it is a.key = c.key where key can be any column whose value is equilivent in what it represents to the value it is being compared to, that is, student_number = student_number or the columns regardless of name are both building numbers, room numbers, etc ....
This is not your exact solution but it should help.
HTH -- Mark D Powell --

Can selected items in time Machine be removed?

Is there any way to remove selected items from time machine backups?

Yes. See #12 in the Frequently Asked Questions *User Tip,* also at the top of this forum.

Selecting audio output from iPhone - bluetooth or dock?

Hi
I have a problem selecting audio output on my iPhone 3GS with my incar system
Set up:
Dension ipod dock connected direct to CD changer port on Radio
Bury Bluetooth hands free device.(CC9060)
My preferred option is to have the Dension play my audio.
However when I turn on the iPod function on the iPhone, the audio defaults to the Bury hands free system and tried to stream the audio via bluetooth which the phone cannot do.
On the bottom right of the screen on the iPhone, I see a speaker icon - I click on this and I get the option to select the iPod Dock or the CC 9060 (Which is the Bury Hands free)
I can select the iPod dock and teh audio plays fine, however, how to I force the iPhone to always use the iPod dock and not the Bury hands free.
From what I can tell, its not the Bury which is forcing teh choice - its the iPhone, but I cannot see anywhere where there is an option to choice the iPod dock as the default audio device.
Any one have any ideas?
Thanks
Glenn

Found a quite probable fix.
I've took my dock station under big lens and noticed a stuck contact -- they are supposed to be somewhat movable. So I pick a real small screwdriver and unstuck the contact.
Issue is apparently gone.
Message was edited by: Alex HQuest

Select audio between time markers?

Similar Messages

Maybe you are looking for