Select "Develop" and "Lightroom has stopped working"
First off I'm new to Lightroom. I moved up from Elements.
I upgraded to 3.4 and now when I select "develop" Lightroom stops working.
Any ideas?
I'm running windows 7 home 64 bit all updates are current.
I have a small ssd for a hard drive and therefore removed the old 3.2 directory after the upgrade.
I have 6gig of memory and an AMD quad core phenom II 3.4GHz.
I have an Nvidia Gforce GT 430 graphics card driver version 270.61
From the application event log.
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program Adobe Photoshop Lightroom 64-bit because of this error.
Program: Adobe Photoshop Lightroom 64-bit
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional Data
Error value: 00000000
Disk type: 0
Similar Messages
-
Adobe Photoshop Lightroom has stopped working error
Updated to latest CC version - everything worked as expected for a couple of days - earlier this afternoon LR started (and continues) to crash. "Adobe Photoshop Lightroom has stopped working" error - I followed various bits of support instructions - uninstalling - re-installing - signing out and back in - downloaded and engaged "Adobe Creative Suite Cleaner Tool" - now, several hours later, the problem has not been resolved - I urgently need to get back to my project. Unfortunately, I even followed the thread that instructed to uninstall the previous 5.7.1 version.
Please assist asap - regards KalliDid not tinker with any of the setting options in the preference dialog. Just installed and worked successfully for a couple of days using the default settings.
Since the first crash some hours ago, LR has not stayed open making it impossible to try different settings.
The default install provided a fully working app - I tried out the new feature and soon after went back to my project.
Could the fact that I uninstalled the previous - 5.7.? version have anything to do with this?
How can I re-install the previous version at it was stable?
Do any of you have any answers?
And / or do you know how to engage Adobe?
Thanks - Kalli -
"Edit in Photoshop" link from Lightroom has stopped working.
My "Edit in Photoshop" link from Lightroom has stopped working. If I hit "Cmd E" in Lightroom, Photoshop opens, but the picture doesn't appear. I have LR 5 and PS CC 2014. I recently uninstalled or deleted PS 6 & PS CC (not PS CC 2014). Any suggestions?
Same problem here. I uninstalled Photoshop CS5 and reinstalled. No change. I also tried dumping PS preferences
It opens the Photoshop application with all the menus/windows, but it never opens the actual image I chose to work on.
I'm on a Mac, using OS X Yosemite, 10.10.1 Lightroom is version 5.7 Photoshop is CS5, version 12.0.4
FWIW, I also can't automate>Photomerge ... . Makes me think Photoshop, not Lightroom, is all wacky. -
HELP!! Lightroom has stopped working.
Just added serial number to my trial program & it was loading & working just fine for a couple minutes & then all of a sudden it just closed & stopped working. When I go to open it now it says "Lightroom has stopped working" check online or close program, but it doesn't do anything when I go to check online. also when I view program details...it says the even was APPCRASH. Does anyone know what happened. I assume yes, something crashed. But I tried uninstalling & reinstalling & it is still doing it! Can somebody help!!!??? Please?
Open a Windows Explorer, and navigate to the following directory:
"Users\[username]\AppData\Roaming\Adobe\Lightroom\Preferences\"
In there, you'll see a file called "Lightroom 3 Preferences.agprefs". Rename this file to "Lightroom 3 Preferences.agprefs.old", then start LR.
Beat -
I cannot open lightroom "lightroom has stopped working" error message
I cannot open lightroom "lightroom has stopped working" error message
I'm having what sounds to be the same issue. May I ask what version you were running? I'm using 4.1... And more importantly, have you figured out a solution?
Any help would be greatly appreciated!
Thanks! -
'Attach photo' to emails and messages has stopped working. Help?
'Attach photo' to emails and messages has stopped working.
The function is grayed out. Help?
— Relatively new iPhone 6+ with latest system ...
If on a mac, I'd be running a disk utility or looking to overwrite an app, or re-install the system.
Although over 25 years on Macs, this is my first iPhone... and I'm missing a few (probably) subtle things to do to resurrect this function.
Help?
ThanksHi CartoonBob,
If you are having issues with being unable to attach a photo from Mail on your iPhone, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPhone -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L -
Installed new Premier Elements 12 and dymamiclinkmanager has stopped working
The Sw does not start at all I get several error messages:
Installed new Premier Elements 12 and dymamiclinkmanager has stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: dynamiclinkmanager.exe
Application Version: 6.0.0.0
Application Timestamp: 523cc6d3
Fault Module Name: MSVCR100.dll
Fault Module Version: 10.0.40219.1
Fault Module Timestamp: 4d5f0c22
Exception Code: 40000015
Exception Offset: 0008d6fd
OS Version: 6.3.9600.2.0.0.256.48
Locale ID: 1035
and after those a Message:
Adobe Premier Elements 12 has stopped working
Problem signature:
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Elements.exe
Application Version: 12.0.0.0
Application Timestamp: 523cd4d5
Fault Module Name: dvamarshal.dll
Fault Module Version: 11.0.0.0
Fault Module Timestamp: 523cc62d
Exception Code: c0000005
Exception Offset: 0000000000034961
OS Version: 6.3.9600.2.0.0.256.48
Locale ID: 1035
So did I purchase piece of crap, or what should I do to get the SW working?
Br
-HFirst, note that this is a user-to-user forum. If you want to contact Adobe, you'll need to call or write them on their main site.
That said, as the note says at the top of the forum, you're going to have to provide us a lot more information if you want us to help you. "Stopped working" doesn't tell us much. Does this mean that it was working in the past but then stopped? What stopped? What did it do that it's not doing now? What were you doing when it stopped? Was it when you were adding video to your project, for instance?
What operating system are you using? If Windows, have you manually gone to Windows Update and made sure you've got the non-critical updates, which don't download automatically to your system? Have you ensured you have the latest version of Quicktime, per the program's requirements?
How fast is your processor, how much RAM do you have and how much free, clean, defragmented space is on your hard drive?
What model of camcorder is your video coming from and what format and resolution is it? Did you use Premiere Elements to get the video from your camcorder to your Premiere Elements project? -
My internet and bbm has stopped working !?
hi my bbm and internet has stopped working since about 5 o`clock yesterday , when i click on the internet "error " and i can click on the bbm but the recent updates has gone and i will try and send a message and it has the red clock next to it.
Are you receiving or able to send email?
ashlee, Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
After reboot give it a few minutes and see if your data starts working again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
My daughter has an iPod and FaceTime has stopped working as she is not able to verify her email address please can you help.
As long as you can't get a hold of the device, you can't do anything more than talking to your daughter about it.
Erasing the device could also be an option to keep her from using apps you don't want her to have on her device.
Try talking first -
Hi,
I have a PC running Windows 7 - 64bit OS. I have had iTunes installed since the beginning of the year on this computer and have not had any trouble with it except actually using iTunes but that is a different issue. The other day I inadvertently downloaded "Tuneup" which I don't want or need. I firstly want to say I have no concrete evidence that Tuneup has led to my problems. It may be coincidental that Tuneup and my problems appeared together.
Tonight when I started iTunes, Tuneup took over a quarter of the screen on the right side. I closed this program. When the list of tracks was ready to be loaded from the CD and I went to" file" - "get info" option the message "iTunes has stopped working" would appear. Closing this message resulted in iTunes shutting down. I should say that before I closed the message the computer had essentially ground to a halt. The other curious thing was the behavour of the mouse pointer on the screen - the only place where it was visible was in the "iTunes has stopped working" box. Moving it out of the message box resulted in it disappearing. It would reappear if it were caused to wander into the message box.
I subsequently removed Tuneup (control panel, programs and features, etc...) iTunes had not improved. I then deleted iTunes, firstly saving the library to a file on the desktop. Then I did a fresh(?) install of ITunes but there seems to be no change. A curious thing was even though I had deleted iTunes through the control panel the library was still there as if I had done nothing. The whole thing is a complete mystery and extremely galling.
If someone has had a similar problem I would really like to know what the fixes were.
Thanks for "listening".
Cheers,
Grant Andrews.I had a similar problem. I'm using 64bit Windows7. The following solution worked for me:
COPY QTMovieWin.dll
FROM c:\program files (x86)\common files\apple\apple application support\
INTO c:\program files (x86)/iTunes
Also, reinstalling Quicktime has worked for others having this same issue. -
Adobe Flash Player installer/uninstaller 10.1 r82 AND 102 has stopped working
Hi there,
First time I've used these forums and I am a bit computer illiterate, so apologies if I come across a bit stupid!
I am using the following systems:
Windows Vista (32 bits I think)
IE 7
Adobe / Flash v 10.1.82.76
I was trying to install iTunes on the weekend and was having trouble, so Apple suggested I delete my Local Temp Files and all Apple apps, which I did.
Since then, when I try to access most internet sites, I encounter the following error message:
'Adobe Flash Player installer/uninstaller 10.1 r82 has stopped working'. I have the option of getting Windows to check the problem or closing the problem, whichever option I select I just go round and round in circles as it keeps coming back to the same error message. As a result, I can't access most websites as the page just freezes and I eventually have to close IE.
I understand this to be a common problem as I've done a few google searches and have come across others with the same problem and have tried various solutions without success.
I have tried to download Adobe uninstaller (via another PC and saving it on to disk and then onto my desktop), but when I try to run this as administrator I get the following message;
'Adobe Flash Player installer/uninstaller 10.1 r102 has stopped working'.
I am at my wits end, if there is anyone out there that can help it would be appreciated.
Thank you.NO, just a windows pop-up with the message:
"Microsoft Windows
Adobe Flash player Installer/Uninstaller 10.1
r85 has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution is
available."
And then just the option to "close program". This happens at the point of me trying to install the
program from the saved download on my desktop, directly through a website or any other method I've tried.
Thanks -
Adobe lightroom has stopped working
hey,adobe lightroom has stopped working
if that's the error message you're seeing:
reset your preferences -
acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
adobe media encoder: https://forums.adobe.com/thread/1713540
after effects: http://helpx.adobe.com/after-effects/using/preferences.html
dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
indesign: https://forums.adobe.com/thread/526990
lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
photoshop: https://forums.adobe.com/thread/375776
photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
premiere elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
if that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall -
My trackpad pinch and close has stopped working correctly on web pages, but ok on email?
Recently the pinch and close on my trackpad has stopped working correctly when I view websites/pages, it will enlarge only once and will not reduce at all after that. Although It works perfectly well when viewing emails. Does anyone know if this can be solved please, my laptop is still under wareenty but this feels like a software problem maybe..?
Thanks
MilosorbFirst look at this Apple support article for possible solutions:
https://support.apple.com/en-us/HT203171
If no success, sometimes a very through cleaning of the trackpad will restore functionality.
Last, open the MBP and examine the battery to see if it has expanded. It resides under the trackpad and may be interfering with it. If that is the case, the battery should be replaced.
Ciao. -
HT1430 My FaceTime and iMessage has stopped working
I'm in Las Vegas and my FaceTime has stopped working after 2 days
Do you have a good wifi connection?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Martha Stewart Magazine on line edition in Newstand has stopped working. Any suggestions?
So, OK, what did you do to **** Martha off? She is all powerful, you know
Try a reset: simultaneously hold down the on and home buttons until the iPD shuts down, then turn it back on.
Maybe you are looking for
-
How to give filter condition in expdp to filter parent and child records?
Hi, I have a requirement of export schema. Assume there is a account details table and account transactions table under schema.They have parent child relation exist. if i filter accounts from account details the corresponding transactions in account
-
Hi How to import excel source into Admin or Answer. OBIEE 10.1.3.4.1. version using with XP environment. Could you pls send me step by step details.It's very urgent. I need to create dashboard using excel data's Thanks
-
What is the use of S/MIME in mail adapter?
Hi all, anyone have a document for this or a scenario which can help to understand it properly. Thanks
-
Is localized version of Adobe Reader 9.4.6 for UNIX available ?
I am using Adobe Reader for Linux 9.4.2 localized for Japanese. I want to upgrade to 9.4.6, but it is not found; only for enu version is found and fra, deu, and jpn is not found. Please release them.
-
Libretto U100 looses often connection to the Wlan hub
Hi I am having problem with my wireless network card. I am often loosing connection with the hub. I read on another forum that it maybe a good idea to update the drivers. I have never done this before and I want to ensure I do it correctly. Can you p