"Select Distinct Records" Option Not Available

Hello Experts.
I am working on a new report in CR XI, and noticed that I had many duplicate records.  I went to the File; Report Options; and expected to click on "Select Distinct Records", but that choice was grayed-out.  What would have caused me to lose this option, and how do I fix it?
Thanks in advance for your help.

Not sure if this covers it or not, but....
The Select Distinct Records command is only available for ODBC, OLE DB, and SQL native drivers; it is not available for Stored Procedures. Note also that your server may automatically sort returned values if no sort is specified in Crystal Reports.

Similar Messages

  • I have the latest version of photoshop cc . Why is the focus select option not available ? (for selecting the in focus area)a)

    I have the latest version of photoshop cc. Why is the focus selection option not available ?

    Use CC 2014 menu Help>System Info... use its copy option and paste the info here.  So we know your running CC 2014 not CC and that you have an enabled GPU....and latest device drivers.

  • Error message: "the previously selected audio interface is not available"

    HELP?!?!?!?!?
    I'm stuck, and I can't go forward. Here's my issue:
    I've bought a Focusrite Saffire LE, a simple firewire audio interface, for use with my Logic Express 7 (with all the latest updates). I run the setup assistant and select my saffire as the audio interface to use, and then when logic runs I get the message "the previously selected audio interface is not available" and it defaults to my Macbook Pro's internal microphone and speakers.
    Just for sanity I've tested the audio interface with garageband and it's fine. My other audio apps aso run fine using the saffire as the audio interface. The setup assistant for logic has no problem finding the saffire, so why does it get rejected as soon as logic starts?!?!?
    Please - this is driving me crazy.

    I asked Focusrite for some help, and they said it should work (which I knew) and made some suggestions. Here's their email:
    "Saffire LE should work fine in Logic Express.
    Try resetting your logic preferences. Go to Logic > preferences > initialise all except key commands.
    Do you still have the same problem?
    Do you have any other firewire devices attached?
    Have you had any other interfaces installed in the past?"
    All good suggestions, but so far no luck.
    Has someone else got the same config as me? (15" Macbook Pro and focusrite saffire le)?

  • Preview on [device name] option not available

    Preview on [device name] option not available on Folio Overlays

    In v20 its available in the Folio Builder panel (iPad only, I think). You have to plug to your Mac to the iPad with the USB cable and starting the Adobe Content Viewer app on the iPad first. Otherwise check iTunes on your Mac if your iPad is listed under "Devices".
    Are you using InDesign CS5.5 or InDesign CS6?
    You have to be up to date with the Overlay Creator panel to v20 as well. Check for that.
    Recently I had no chance with InDesign CS5 and the v20 tools installed on a Mac with OSX 10.5.8.
    Uwe

  • "The selected port, COM1, is not available..."

    I had a Sony Clie working just fine on my new Dell XPS 400 with Windows XP 2005 Media edition. It died on me and when I went to recharge it, I got a message I'd never gotten before:
    "The selected port, COM1, is not available at this time. HotSync Manager will open the port when it becomes available."
    I just bought a new Palm Z22 and I'm having the same problem.
    The crazy thing is, I HAVE NO COM (SERIAL OR PARALLEL) PORTS ON THIS COMPUTER! Consequently, there is no "Ports" icon in the Device Manager.
    I'm totally stumped. Any help would be greatly appreciated!!
    Post relates to: Palm Z22

    I am having the same problem on both my PCs (HP Laptop and Dell Laptop) using Bluetooth via USB. I can connect with the cable just fine every time. I also successfully HotSync’ed via Bluetooth the first time.
    After shutting down the PCs, the I get the "The selected port, COM X, is not available at this time. HotSync Manager will open the port when it becomes available."
    I've gone in to the Microsoft Bluetooth manger and added and deleted ports several times. That hasn’t worked.
    Help!!!

  • Erase free space  can't be selected or "erase" is not available

    Hi
    Today I found that Erase free space  can't be selected or "erase" is not available , and I don't know !
    I need to get free space ,I know its not a good idea but I need to do it .
    So please help me ,if there is something wrong on my mac
    Teach me step by step how to show that button ON
    Thanks a lot

    Please note that "erase free space" does not create free space. It just makes all the bits in the existing free space the same (so that nobody can recover data from the files that used to be there).
    Knowing that, do you still need to erase free space?

  • Outboung Campaing: Error Unable to communicate with Enterprise Server. outbound Option not available

    Hi everyone,
    I'm running UCCX 8.01 + CUCM 7.1+ Cisco 7942 just for learning purpose. After creating the Outbound Campaign and imported the Contact List the call is received by the agent (call is state is received as Offering) but after press the Accept, Reject or any othe action button is received the error:
    Error Unable to communicate with Enterprise Server. outbound Option not available (attached to post).
    What does this mean?
    Regards
    Please rate all useful posts
    Favor calificar todos las respuestas útiles.
    LinkedIn Profile: do.linkedin.com/in/leosalcie
    MDGDP, CCNA, CCNA Voice, CCNP Voice Certified       

    Any idea?
    Please rate all useful posts
    Favor calificar todos las respuestas útiles.
    LinkedIn Profile: do.linkedin.com/in/leosalcie
    MDGDP, CCNA, CCNA Voice, CCNP Voice Certified

  • WLAN override option not available for WLC 4402 - 6.0.196.

    Hi All,
    Its kind of weird BUT it seems that the option for WLAN override is missing.u.
    I could find it on the lower version BUT not on the 6.0.196.
    Please help.
    Does this mean I could only set it up via the WCS and not the WLC directly.
    Thank you.
    Warmest Regards,
    Azzafir Ariff Patel.

    Hi Scott,
    Thank you so much for the clarification.
    Thanks again.
    Quoting fella5 :
    azzafir,
    >
    A new message was posted in the Discussion thread "WLAN override
    option not available for WLC 4402 - 6.0.196.":
    >
    https://supportforums.cisco.com/message/3042635#3042635
    >
    Author : Scott Fella
    Email : [email protected]
    Profile : https://supportforums.cisco.com/people/fella5
    >
    Message:

  • Option not available to add skype to go number in ...

     Option not available to add skype to go number in canada.... Urgent its been 1 week

    venkatesh wrote:
     Option not available to add skype to go number in canada.... Urgent its been 1 week
    Skype To Go numbers are available in the following countries:
    Australia
    Canada
    Chile
    Denmark
    Estonia
    Finland
    Greece
    Hungary
    Ireland
    Latvia
    Lithuania
    Luxembourg
    Mexico
    New Zealand
    Poland
    Portugal
    Romania
    Slovenia
    Singapore
    South Africa
    Sweden
    United Kingdom
    USA
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • HT204053 iCloud option not available on MacBook Air

    Why is the iCloud option not available on my MacBook Air?  It's not under the System Preferences in the Apple dropdown...only the MobileMe options are still there.

    r_lopez wrote:
    Why is the iCloud option not available on my MacBook Air?  It's not under the System Preferences in the Apple dropdown...only the MobileMe options are still there.
    iCloud won't appear in System Preferences in Snow Leopard. But, you can get some of the features of iCloud working with 10.6.
    Mail AND iCal work just fine. See this article: http://bit.ly/LvVCR2
    I use the iCal info on two of my own Macs and it works fine. The Address Book hack is a maybe. Read through the comments associated with the blog entry. Some folks have gotten the AB hack to work by locking the plist file.

  • M Audio firewire solo with yosemite - 'The previously selected audio interface is not available'.

    Hi, I recently bought a new mac mini with yosemite OS. I plugged in my M-audio firewire solo and (after a bit of trouble) finally managed to see it appear in GB. then moments later a dialogue box appears with 'The previously selected audio interface is not available'.
    There doesn't appear to be any update drivers from M-Audio and the CD that came with the interface also does not work?
    I can't find any information with this problem. Can any one help?

    Oops. . . A loose lead connection may have been the problem, although still not receiving a signal?

  • Select distinct records in Mapping with no Key field (all fields can vary)

    Hi Experts,
    Let me take an example (not the actual requirement but same scenario) to explain the problem where I need your help to get best possible way to resolve. This has to be achieved in mapping, don't have other options as its part of complex end 2 end scenario.
    I have following input XML:
    <Employee>
       <Details>
          <Id>123</Id>
          <Name>ABC</Name>
         <Role>Manager</Role>
          <Area>Bangalore</Area>
        </Details>
        <Details>
           <Id>123</Id>
           <Name>ABC</Name>
            <Role>Manager</Role>
             <Area>Pune</Area>
         </Details>
          <Details>
           <Id>123</Id>
           <Name>ABC</Name>
            <Role>Advisor</Role>
             <Area>Bangalore</Area>
         </Details>
          <Details>
           <Id>123</Id>
           <Name>ABC</Name>
            <Role>Manager</Role>
             <Area>Bangalore</Area>
           <Details>
           <Id>143</Id>
           <Name>ABC</Name>
            <Role>Manager</Role>
             <Area>Bangalore</Area>
         </Details>
    </Employee>
    The output XML is:
    <Employee>
       <MainRec>
           <Id>123</Id>
            <Name>ABC</Name>
             <table name = 'Roles'>
                   <record>
                          <Id>123</Id>
                           <Role>Manager</Role>
                            <Area>Bangalore</Area>
                      </record>
                      <record>
                          <Id>123</Id>
                           <Role>Manager</Role>
                            <Area>Pune</Area>
                      </record>
                      <record>
                          <Id>123</Id>
                           <Role>Advisor</Role>
                            <Area>Bangalore</Area>
                      </record>
                  </table>
          </MainRec>
          <MainRec>
            <Id>123</Id>
            <Name>ABC</Name>
             <table name = 'Roles'>
                   <record>
                          <Id>143</Id>
                           <Role>Manager</Role>
                            <Area>Bangalore</Area>
                      </record>
                </table>
            </MainRec>
    </Employee>
    As you can see from the example above, here I want to populate only distinct records under table, but there is no key fiield to ditunguish. Any of the 3 fields (Id, Role,Area) can vary and between 2 records if all of these fields are same then its duplicate else select it. So in above XML just discard the 4th record from the source XML and populate all others. Each record has to be checked against all other records all 3 values (ID, Role, Area). Only when none of the records have exactly the same values, populate it.
    Also records with different ID come under different table node. Hope my requirement is clear, if not please let me know, i will try to explain better.
    I thought of creating a UDF to achieve this but not able to decide how to match it to the output message here.
    Best Regards,
    Pratik

    Hi,
    For the main record, I think you only need to check for each unique ID, e.g
    Id --> removeContext --> sort:ascending --> splitByValue:valueChanged --> collapseContext --> MainRec
    For the record, however, you need to create a UDF that will filter out the duplicate values. For this, the UDF sample mentioned here contained multipleResult lists
    Id --> removeContext --> concat: : --> concat: : --> UDF --> splitByValue:ValueChanged --> record
    role --> removeContext --> /          /                \ --> Id
    area --> removContext -------------> /                  \ --> role
                                                             \ --> area
    Context type UDF
    Arguments: input
    Result: IdResult
    Result: roleResult
    Result: areaResult
    Vector temp = new Vector();
    for(int a=0;a<input.length;a++){
       if(!temp.contains(input[a])
             temp.add(input[a]);
    for(int a=0;a<temp.size();a++){
       String tmp = (String) temp.get(a);
       /*split according to field */
       IdResult.addValue(tmp.substring(0,tmp.indexOf(":")));
       roleResult.addValue(tmp.substring(tmp.indexOf(":")+1,tmp.lastIndexOf(":")));
       areaResult.addValue(tmp.substring(tmp.lastIndexOf(":")+1,tmp.length()));
    note: Id and record will both be using the IdResult list.
    Hope this helps,
    Mark

  • 30 GIG Video iPod, Video Options not available - Please help!

    Hi.
    I have a 30 GIG iPod Video 5th gen, with the latest iPod updater software installer on it.
    But when I look at the iPod preferences, when it's plugged in via USB, all Video options (manual vs automatic etc) are all greyed out and not available for selection.
    And I can't drag any videos onto the iPod (even with the right video format!).
    It's like the iPod itself doesn't recognised that it is an Video one, like it has a complex and can only deal with music and photos.
    Can anyone help or offer advice?
    Anyone had a similar problem?
    Any help would be greatly appreciated.

    Thanks for your help guys.
    Even with the iPod set to manual, I couldn't drag iPod format videos directly onto it.
    Did a factory restart, and it has fixed the problem.
    And just a note; the options in the video tab will always be greyed out, when the iPod is set to manually update songs.
    cheers!
    bc

  • Select distinct records without using distinct

    hi experts,
    my retrieved data like these:
    cnt_id cnt_type rcrd_id wrkflw_id
    558848     PRODUCT     553503     248     
    558848     PRODUCT     553503     248     
    558848     PRODUCT     553503     248     
    558808     PRODUCT     553463     248     
    558808     PRODUCT     553463     248     
    558808     PRODUCT     553463     248     
    558810     PRODUCT     553463     248     
    558810     PRODUCT     553463     248     
    558810     PRODUCT     553463     248
    now i want to select one record for each cnt_id without using any distinct function .. how can i do that?
    regards,
    SKP

    you can use the below query
    select * from t where rowid in (select max(rowid)
    from t group by cnt_id)You're query is not the equivalent of DISTINCT.
    SQL> ed
    Wrote file afiedt.buf
      1  create table t as
      2            (select 558848 as cnt_id, 'PRODUCT' as cnt_type, 553503 as rcrd_id, 248 as wrkflw_id from dual union all
      3             select 558848, 'RETURN', 553503, 248 from dual union all
      4             select 558848, 'PRODUCT', 553503, 248 from dual union all
      5             select 558808, 'PRODUCT', 553463, 248 from dual union all
      6             select 558808, 'PRODUCT', 553463, 248 from dual union all
      7             select 558808, 'PRODUCT', 553463, 248 from dual union all
      8             select 558810, 'PRODUCT', 553463, 248 from dual union all
      9             select 558810, 'PRODUCT', 553463, 248 from dual union all
    10*            select 558810, 'PRODUCT', 553463, 248 from dual)
    11  /
    Table created.
    Elapsed: 00:00:00.01
    SQL> select * from t where rowid in (select max(rowid) from t group by cnt_id);
        CNT_ID CNT_TYP    RCRD_ID  WRKFLW_ID
        558810 PRODUCT     553463        248
        558808 PRODUCT     553463        248
        558848 PRODUCT     553503        248
    Elapsed: 00:00:00.00
    SQL> select distinct * from t;
        CNT_ID CNT_TYP    RCRD_ID  WRKFLW_ID
        558810 PRODUCT     553463        248
        558808 PRODUCT     553463        248
        558848 RETURN      553503        248
        558848 PRODUCT     553503        248
    Elapsed: 00:00:00.00
    SQL>

  • Synchronize from audio option not available in 'Create mutli-camera source sequence' command?

    I watched Jason Levine demonstrate the 'create multi-camera source sequence' feature that allowed you to sync multi-camera clips automatically by clicking on an 'audio' option:(http://tv.adobe.com/watch/creative-cloud-for-video/dslr-editing-workflow-in-adobe-premiere -pro-cc-part-3-multicamera-dslr-workflow-with-automatic-audio-sync/)
    I loaded in three clips from three different cameras of the same shoot, and when I follow those instructions and select the above command, it doesn't present the dialogue to select the synchronize from audio feature:
    Am I doing something wrong? All three clips have audio...can't figure out why this feature isn't working for me??Is this not available in the Premiere Pro version we have available for download? I'm just in the process of upgrading to 6.02 now to see if thats the case...

    This will only be available in Premiere Pro CC due out June 17th.

Maybe you are looking for