Select doesnt work

I have created tables by logging as a user 'dcl' when i go to sqlplus(logged as dcl)and query any table under the ownership of 'dcl' i get the error 'table or view not found'.if i query the same table through ENTERPRISE MANAGER logged as dcl
it shows me the contents of all the table.The above problem also occurs while accessing through powerbuilder and any other application.I do not think select permissions must be given to dcl to run select query on tables created by him.

When you say "does not work" what error message are you getting? It's virtually impossible to diagnose these problems without some specific information.
cheers, APC

Similar Messages

LMS4.1 OGS doesnt work for Eventconsole/Syslog

Hello,
Device selection doesnt work for Monitoring=>Eventconsole/Syslog, but you can filter with the filter function inside Eventconsole/Syslog
but without the possibility for device filtering. Message-Box "No device found ... " will appear also with selecting "All devices"
Device selection (OGS) works in any other applications - with being extremly slow for nested user defined groups btw - including to generate syslog reports from report generator.
Because Spectrum is used for FM in this network, customer will save resources at the slow GUI responding LMS server and switched DFM off, by deactivation at Admin > System > Device Management Functions.
Is the device selection issue in Monitoring=>Eventconsole/Syslog a known bug and can count with a bugfix in future?
Steffen
P.S.: after switching the GUI to https, the syslog subscription has been stopped due to a cerificate trusting issue. I expect from a prime SW that this should be included in the https mode switching automaticly.

Please try the following steps:
1. Stop the daemon manager (Net stop crmdmgtd).
2. Regenerate the SSL certificate (Dont forget to start you shell/command prompt session as Administrator):
     *Remove server.* files under NMSROOT\MDC\Apache\conf\ssl (take backup of all 4 files before deleting).
     *NMSROOT\bin\perl NMSROOT\MDC\Apache\ConfigSSL.pl -disable
     *NMSROOT\bin\perl NMSROOT\MDC\Apache\ConfigSSL.pl -enable
     *Fill all the details it request for.
     *Ensure that the following files are created under NMSROOT\MDC\Apache\conf\ssl :
server.crt
server.csr
server.key
server.pk8
3. Start the daemon manager (net start crmdmgtd).
4. Try to access the GUI with https://xxxxxx:443.
-Thanks

Selection tool doesnt work in illustrator cc 2014

selection tool doesnt work in illustrator cc 2014.

Hi officeisbig,
While we are working on a solution, if you can upgrade os to 10.9, the issue should get fixed.
Sanjay.

HT1212 if you cannot remember passcode you selected and get locked out of iphone 4 and it says to connect to itunes and it doesnt work what can you do to have use of your phone again?????

Is there anyway you can enable iphone 4 afer being locked out by entering wrong passcode more than 5 times and it says to connect to itunes and still doesnt work???? so frustrating... apple cannot

iOS: Forgotten passcode or device disabled after entering wrong passcode

Ios 6, my wifi doesnt work, even after switching wifi on and off, aswell as removing saved wifi spots and switching from manual to auto

ios 6, my wifi doesnt work
even after switching wifi on and off
as well as removing saved wifi spots
and tried switching from manual to auto
it works intermittently after these changes are made, but still shuts off.
i have ios 6 on both the iPhone 4 & the Iphone 5.
my router at home is D-Link router
please help!

You have the same problem in two mobiles? Uou....
I have had used D Link router before, and I faced problems to connect my computer.
Now I bought Netgear, and it shows strongly better than the f.... D Link...
Try:
Settings>>WiFi, and then turn off Ask for Conection;
Or:
Settings>>Privacity, be sure the Location Service is turn on;
Or:
In Settings>>General>>Reset, select "Reset all Adjusts". (Sorry, but it will change some personal adjustments, but will not delete anything at all)

Trying to install the newest version of itunes on my pc and am getting "program cant start because msvcr80.dll is missing from your computer" reinstalling doesnt work. and then it says error 7 (windows error 126)

trying to install the newest version of itunes on my pc and am getting "program cant start because msvcr80.dll is missing from your computer" reinstalling doesnt work. and then it says error 7 (windows error 126). Any help would be appreciated. Using Windows 7 enterprise on an hp Z600

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

ITunes doesnt work with my iPod!!! Help please!

ok...i have tried to plug my iPod into my computer lately, and iTunes doesnt recongnize that my iPod is plugged in!!! i have pretty much de-bugged the problem...its not any of my USB ports b/c other hardware (digital camera etc...) work in them...and its not the computer...but it could possibly be iTunes. if i delete and re-install my iTunes software do i loose all my songs? and w/out loosing all my songs etc is there anything i can do to fix this?
i have also tried resetting my iPod multiple times, but that doesnt work so...the only other thing i can think that could have happened is: i got an iHome a few months ago, and ever since that i have had the problem...so that could have messed something up...can u help?

Does the text on your iPod show up grey in iTunes? Grey text when you look at the content and lock symbol at the bottom of the screen simply shows that your iPod is set to "automatically update songs and playlists". . If you want to access your iPod directly, play it through your iTunes, connect it to a second computer etc. you just need to change the update method to "Manually manage songs and Playlists" in the iPod preferences. For more detail see this tutorial: Managing Your Songs Manually
One thing to be aware of with manually updating is that the iPod also has to be manually ejected before the "Do Not Disconnect" message will go away. Safely disconnect iPod
For info: iPod 101
The iPod offers three ways to transfer music from your computer. You can select one of the following update modes from the iPod Preferences menu in iTunes (Edit=>Preferences=>'iPod' tab):
1) Automatically update all songs and playlists. This is the default mode, in which your entire music library, including playlists, is automatically synced to your iPod. If the music library on your computer exceeds the iPod storage capacity, you are prompted to select a different update method.
2) Automatically update selected playlists only. With this option, iTunes automatically copies the playlists you have selected to the iPod when you connect it to the computer.
3) Manually manage songs and playlists. You can also choose to transfer music to the iPod manually. This allows you to drag and drop individual songs and playlists from iTunes to the iPod.

Why doesn't saving a print preset for selection printing work anymore? It previously did up to version 2.

I regularly like to highlight areas on web-pages, select print/name a print preset as "Print Selection" and check-mark 'Print Selection Only' of Options under the Firefox sub-heading. Then when I wanted to quickly print a selection instead of a whole web-page, I just highlighted an area, activated print, selected "Print Selection" and then checked print preview to view the selection before printing. That worked from version 2 only.
Now in version 3 +, all above can be done '''except''' the check-marked 'Print Selection Only' option in the Firefox sub-heading keeps resetting itself, even IF you have saved it check-marked as a print preset. Selecting the saved preset "Print Selection" next time will print (preview) the whole web-page, and not what was highlighted (selected) for printing. Why was this feature turned off?

baileyb1 wrote:
My skype used to work, and now it doesnt work anymore. I just get an error message now.
Access violation at address "Skype.exe" Read of address 0000000048.
Help, it used to work before but no longer. I dont know how to get it working again.
Baileyb1
Open Windows Event Viewer -> Custom Views -> Administrative Events. Look for the recent error messages with timestamp corresponding to Skype crash. Copy and paste here the text from the General tab.

Enter key doesnt work in url line

enter key doesnt work in url line. only i have to pick go button with mouse

# Click the orange Firefox button and select Add-ons to open the add-ons manager
# In the list of extensions click on AVG Safe Search to select it, then click the Disable button
# Restart Firefox

Menu button doesnt work

All of a sudden the menu button stopped working. It was fine one day then I put the ipod on charge, several days later when I tried to use it again the Menu button no longer works...
Actually I just realized that the Play/Pause button doesnt work correctly either. When you push and hold it it does not turn the device off anymore although it would still pause/play the songs. The forward/reverse work ok.
I tried resetting the Ipod using the updater and that didnt help. I also tried Menu + Select ... strangely enough it resets the device but after it resets the Menu key doesnt work.
Has anyone experienced this problem?
I submitted a service request. Is there any way of modifying the service request since I just realized that the play/pause button is screwed up also?
Finally, when you turn the hold on/off is that supposed to turn the backlight on/off as well? I never paid attention to it but now when I turn hold on that also turns the backlight on...is that screwed up as well?

I am having a similar problem with my mini - it turns on fine and will scroll through the menus, but will not respond by going back through the menus. Instead, it freezes on a screen and does not respond to anything except resetting it (menu & select button). Doesn't seem like the proper way to navigate through the screens and is completely frustrating. I was ready to cry yesterday at the gym because it wouldn't work and didn't know the reset "trick" until 3 hours later! I have also had many problems turning it off too. My brother who owns a regular iPod thinks I am crazy but at least I am seeing people out there with similar problems.
On another note, I have to say I am completely disappointed with Apple. The company loves to portray this user-friendly persona, but in truth it is not that way at all. I received my mini in May and have just started to use it full force this month (October) ... now my 30-day phone support has expired and if I want "live" help I have to pay $50 for extended service. That's bull - I'd like some real answers but have been relegated to chat boards (no offense) and trying to troubleshoot the problem myself by finding close but not exact postings. It seems like such a deceptive bait & switch ploy by Apple. I am tempted to send my mini back for service but just read on the web site that I could be charged up to $100 for service. Again, sounds very sneaky so not sure if I should take the risk or live with a highly annoying product defect. Any suggestions?

Gf4MX440-VTP TV-Out doesnt work.

I've just buyed a dual gf4 mx440 with 64Mb and TV-Out, TV-In.
When I installed it I began working with two monitors witout problems, but when I've tried to connect de TV-Out, it doesnt word.
I've checked a hundred times the cable connecting, and it's ok because with my old graphic card I could.
I tried to upgrade the BIOS with an unofficial version and it didn't work, I downdated to the original version of BIOS again.
The graphic card detects the TV because it enables the TV-Out option in the configuration, but when I enable it I get a strange screen of one color on TV. The TV get's of a color brown or orange or something like that and I can't see nothing.
I've selected my country format (Pal/B, Pal/G). I've also tried all other formats whitout any result.
I'm running Windows 2000 Sp3
My motherboard is a DFI AD70-SC (With AGP 4x)
AMD Athlon XP 1.500
512Mb DDR RAM
I've tried all but it doesnt work.
Thank you very much.

Dunno if this thread is still going, but I figured why not
Well, I bought the GF4-mx440 VTP (8866) back in october, but haven't actually gotten around to testing it until last night, and I ran into the same issues.
For reference, the drivers on my cd are 30.00.
It was quite frustrating, but I did a ton of research and here is what I was able to find out. THis information isn't terribly organized, but bear with me because it's hopefully useful
TV-out on nvidia cards is not as simple as some may say. (Ie. all those who say nvidia has way better drivers than ati ).
Different detonator versions have WIDELY varying tvout support. In Some versions it works, some it works well, some it works poorly and others it doesn't work at all. Quite shocking, but sadly this is true.
Bits of info about the MSI-mx440 vtp itself. The tv out is based on a Seperate chip, the Phillips 7108. This chip handles the tv in and out features. (Geforce4 chips have themselves an "on chip" solution for tvout. But typically when manufactures use a Video In chip, you let that chip handle video out also).
Regarding the 440's bios. There is only one version (as listed through the live update running win9x). HOWEVER there are issues with this card and WinXP, to which the fix is to apply a bios update. I have not tried liveupdate on winxp (I run 98se), but I think that this bios update is only available upon special request to MSI. I'm not sure how it affects the situation(s) under win9x, but supposedly it fixes some winxp issues. (I will be installing XP in a dual boot config shortly, so I'l know for sure soon ). So according to the MSI support FAQ's, there is a bios update to address issues in winXP, that you can only get through special request (assuming you have winxp). I am not sure what the affects would be on win9x system, but since I am giong to dual boot soon, I'll probably have to apply the new bios and find out.
Okay, so how to find out if it's a software (driver) problem, or if it's hardware (a broken card that you can return). Here's what you do:
Unplug all monitors (vga connections) and plug in the TV out (I dont' have any s-vidoe tv's, so I just use the composite (RCA) jack) to a tv, and make sure the tv is on. Now boot your computer.
If you get output to the tv (usually the post info from the motherboard, followed by the win98 startup screen) this means your hardware works fine. (This is what happened to me). Strangely, it made it all the way into windows (on the tv), but typically what happens is that once windows loads you end up with the messed up pinkish brown screen. (I've never been able to have it boot into windows on the tv since then, heh).
SO if you do get picture during startup (before the os loads) then it means your card is fine, and it's a driver issue.
*Note: One thing I've noticed is that your tv-output is affected by which VGA out port you put your monitor on. For me, when booting with both connected (vga and tvout) if it's plugged into one socket, I see both monitor and tv, if it's plugged into the other socket, I don't see tv at boot. Not a big issue, but worth noting*
Okay, so now if you did see otuput on the tv during boot (before windows), you know your hardware is working. So you have to find a driver version that works for you. I'm going to list my own experiences.
MY cd came with the 30.00 MSI drivers. These gave me that icky pinkish brown flickering screen. Tv-out didnt' work with them. Tried the 31.00 MSI drivers, same thing. This was odd I thought, as the two most recent MSI drivers didn't work. So I tried the MSI 28.90 drivers, same thing with them too.
Finally I tried the MSI 27.20 drivers, and voilla, tv out worked! I was able to extend the desktop, and clone it, was even able to tape a downloaded episode of 24 on my vcr .
Of course using year old drivers is less than ideal (especially for 3d gamming). However, these are the ONLY MSI drivers that have tvout working.
I decided to move on to the nvidia detonator reference drivers, ideally you'd stick with the manufacture MSI, but what can you do. Here is what I have found so far:
27.20 MSI - Works with tv out
27.20 Nvidia - Works with tv out
27.30 Nvidia - This one is interesting, tv out works in extended desktop mode. BUT there is no tab in the options for cloning (the 'nview' tab is missing). So you can't clone, or overlay, only the extended desktop. So it's an "extended desktop only" driver.
27.42 Nvidia - Works with tv out (works same as 27.20s)
28.90 MSI - NO tv out
30.00 MSI - No tv out
31.00 MSI - No tv out
30.82 - Most resent 41.09 Nvidia - Tried them all, no tv out for any of them.
I have yet to try all the 28-29 nvidia reference drivers, so dunno if tvout works with them.
So what does this all mean? FIrst off, check if your cards hardware works (boot only with tv on and tvout connected, NO VGA). If your hardware works, then you have to find drivers that work with tvout. Give the ones that worked for me a shot, see if they work for you. (I typically plug in my vga and tvout at same time, so a see the POST in BOTH of them. Boot the computer with everything on, and then go to the settings and try to enable tvout).
This situation is less than ideal of course. It looks like you have to pick your drivers based on 3d performance, or tvout. But not both! Either use the most recent drivers for the best 3d support (but no tvout!), or 1yr old drivers for tv-out, but not the best 3d support. I'm an avid gamer personally, so this situation sucks.
What I find odd, is that MSI's own drivers (28.90, 30.00, 31.00) have these issues. They are privy to the peculiarities of the MSI cards, so they should be able to address it.
What the pattern (some drivers work, others don't) suggests to me is that MSI cards aren't fully compatible with the reference design. Possibly an issue with the bios.
I will try and get a hold of the bios update for the WinXp issue, and see how that affects the situation in win98se.
Hopefully this was helpful
(For reference, my system:
AMD xp1700, 256-DDR Kingston - Samsung chips, ECS k7s5a MB, seagate barracuda IV 40gb HD, LG 40x cdrw, onboard ac97 sound + lan, Usb keyboard + usb mouse).
Aggies

Fans going crazy, airport doesnt work and nor does iSight

Hi
I have a 13 inch Macbook Pro, late 2010 model, 2.4 ghz, 4gb ram, so on, so forth
Just had the Logic board done as it died (intermittantly, then completely), and now the fans go crazy at most opportunities, sometimes Airport doesnt fire up (cures with a restart) and iSight doesnt work at all. It goes really slowly when the fans are going nuts. This is only using Chrome..
Any ideas? I'm falling out of love with this computer.

You have a real problem to deal with. I would recommend you download a utility like Snow Leopard Cache Cleaner and clear all user, system, and font caches. Then the following:
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. If you Quit the installer at this point the computer will restart.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Let's see if that helps you out.

Catalog Index doesnt work on alias columns

We have a table with a text column on which we have created a catalog index. The catalog index doesnt work when I create a view of the table with alias column names. Any ideas suggestions.

Interestingly it looks like it does use the index, at least in 11g, as demonstrated below. Can you post a similar demonstration showing exactly what it is that you are trying that does not use the index, along with your version?
SCOTT@orcl_11g> CREATE TABLE a_table (text_column VARCHAR2 (60))
2 /
Table created.
SCOTT@orcl_11g> INSERT INTO a_table VALUES ('rainbow bridge')
2 /
1 row created.
SCOTT@orcl_11g> CREATE INDEX catalog_index ON a_table (text_column)
2 INDEXTYPE IS CTXSYS.CTXCAT
3 /
Index created.
SCOTT@orcl_11g> CREATE VIEW a_view AS
2 SELECT text_column AS alias_column
3 FROM   a_table
4 /
View created.
SCOTT@orcl_11g> SET AUTOTRACE ON EXPLAIN
SCOTT@orcl_11g> SELECT * FROM a_view WHERE CATSEARCH (alias_column, 'rainbow', '') > 0
2 /
ALIAS_COLUMN
rainbow bridge
Execution Plan
Plan hash value: 2287020511
| Id | Operation                   | Name          | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT            |               |     1 |    44 |     3   (0)| 00:00:01 |
|   1 | TABLE ACCESS BY INDEX ROWID| A_TABLE       |     1 |    44 |     3   (0)| 00:00:01 |
|* 2 |   DOMAIN INDEX              | CATALOG_INDEX |       |       |            |          |
Predicate Information (identified by operation id):
   2 - access("CTXSYS"."CATSEARCH"("TEXT_COLUMN",'rainbow','')>0)
Note
   - dynamic sampling used for this statement
SCOTT@orcl_11g>

HDD doesnt work

i bought a toshiba external hard drive but doesnt work with my mac book air

Welcome to Apple Support Communities
What happens when you connect it? Note that the external drive doesn't appear in the desktop unless you have turned on that feature. After connecting the external drive, open a Finder window and tell me if it appears in the sidebar, under "Devices". If so, select it and copy files to it, or do whatever you want with the external drive.
If it doesn't show up in Finder, open Disk Utility (in /Applications/Utilities) and tell me if it shows up in the sidebar

Wheel doesnt work

the spin wheel doesnt work but the select, menu,play,->,<- nuttons work

My wheel doesn't work either. Since yesterday. It has been acting strange for a few months now, not responding properly, but I used to be able to get it to function properly again by toggling the Hold button. Now it doesn't respond at all, only the click buttons work. Resetting the ipod doesn't help.
Question: Can it be fixed or is that it? I'd be pretty disappointed with Apple if its not repairable, seeing that I never dropped or handled it wrong.

Select doesnt work

Similar Messages

Maybe you are looking for