SELECT ION-SCREEN COMMENT & BEGIN OF LINE???

Hi Experts,
What wuld do the follwoing 2 syntax? I mean, just they print the text on Selection-screen! or any thing else?
1 - SELECT ION-SCREEN COMMENT
2-  SELECT ION-SCREEN BEGIN OF LINE
thanq.
Message was edited by:
        Sridhar

See the example :
SELECT ION-SCREEN COMMENT  - it is for text elements for selection-screen fields.
When you radio button,text will come right side,if you want to use left side text,then use comment line.
SELECT ION-SCREEN BEGIN OF LINE
if you want to use selection-screen fields in same line ,then use this
selection-screen begin of block b0  with frame title text-b00.
Data Selection Fields
selection-screen begin of block b1 with frame title text-001.
select-options: s_werks     for marc-werks no intervals
                                         obligatory
                                         no-extension
                                         default '1000',
                s_lgort     for mseg-lgort no intervals
                                         obligatory
                                         no-extension
                                         default '1000',
                s_prod      for marc-zzproddept ,
                s_zzdept    for marc-zzdept,
                s_mtart     for mara-mtart,
                s_matnr     for mara-matnr,
                s_lifnr     for mseg-lifnr,
                s_vmsta     for mvke-vmsta.
selection-screen end of block b1.
selection-screen skip.
Report Type
selection-screen begin of block b2 with frame title text-002.
Shelf Life Expiry Report
selection-screen begin of line.
selection-screen comment 1(31) text-004.
parameter:        r_1   radiobutton group rad1.
selection-screen end of line.
selection-screen begin of line.
Aging  Report
selection-screen comment 1(31) text-005.
parameter:        r_2   radiobutton group rad1.
selection-screen comment 40(30) text-003.
parameter: p_expir as checkbox.
selection-screen end of line.
selection-screen begin of line.
Materials with no Expiry Date
selection-screen comment 1(31) text-006.
parameter:        r_3   radiobutton group rad1.
selection-screen comment 40(30) text-007.
parameter : p_bin as checkbox ."default 'X'.
selection-screen end of line.
selection-screen end of block b2.
selection-screen end of block b0.

Similar Messages

  • [Selection-screen] Begin of line, Icons, Layout, ...

    Hi,
    Is WDA lacking some those very familiar features we have in ABAP Selection-screen? (WDR_TEST_SELECT_OPTIONS application certainly does not show the full scope, is it?)
    Is there a replacement for BEGIN OF LINE in WDA selection-screen?
    What about adding comments?
    Is this possible to add icon or images?
    Besides, I was wondering how it is possible to lay the selection-screen in multiple columns. In tried different layout (Grid, Matrix, ...) without success.
    Lastly, is this possible to put labels on top of input fields?
    Do not hesitate to share your most beautiful selection-screens! 
    Thanks in advance.
    Best regards,
    Guillaume

    Some of the designing things are missing in select options -
    IF_WD_SELECT_OPTIONS~ADD_HORIZONTAL_DIVIDER - > to add a line
    IF_WD_SELECT_OPTIONS`ADD_TEXT_LINE - Add a text based line...
    Regarding alignment we need to work on it..there are layout options using ADD_BLOCK..
    Adding Icon/Symbol - I don't see any option...in the interface

  • SELECTION-SCREEN: BEGIN OF LINE.

    Hi Friends,
    I've tried for Begin of line comment for my required selection screen input, but I got some run-time errors. Can u help me to give a parameters with 3 text field in a straight line/row with your examples.
    Please adivse
    thanks & regards
    sankar.

    Hi Sankar,
    Try this way.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(10) text-001 FOR FIELD p1.
    SELECTION-SCREEN POSITION 11.
    PARAMETERS:p1  TYPE char5.
    SELECTION-SCREEN COMMENT 17(10) text-002 FOR FIELD p1.
    SELECTION-SCREEN POSITION 28.
    PARAMETERS:p2  TYPE char5.
    SELECTION-SCREEN COMMENT 34(10) text-003 FOR FIELD p1.
    PARAMETERS:p3  TYPE char5.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK b1.
    Thanks
    Venkat.O

  • Selection screen COMMENT font

    Hello,
    In a screen I have a SELECTION-SCREEN line which contains a comment, followed by a PARAMETER, followed by another comment, followed by a PARAMETER.
    Here is the example code:
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(14) text-s01 FOR FIELD p_1.
    SELECTION-SCREEN POSITION 33.
    PARAMETERS: p_1 LIKE sy-uzeit DEFAULT '000001'.
    SELECTION-SCREEN COMMENT 52(3) text-s02 FOR FIELD p_2.
    SELECTION-SCREEN POSITION 58.
    PARAMETERS: p_2 LIKE sy-uzeit DEFUALT '240000'.
    SELECTION-SCREEN END OF LINE.
    For some reason the second COMMENT is showing with a different font. Can anyone help me understand why?
    Thank you,
    Nuno Silva

    Hi
    I test it on my system and noticed the same behavior.
    text-s01 = 'TOX'
    text-s02 = 'TOX'
    We can notice differences between the O and X.
    No idea why.
    That is SAP
    If you found a solution, please post it.
    Regards
    DSTJ

  • Selection-screen comment.....?`

    Hi All,
    I need explanation for the following statement
           SELECTION-SCREEN COMMENT 1(15) TEXT-001.
    What does 1 and 15 mean in the above statement?
    Regards
    Dnyanesh

    Hai Go through the following Document
    SELECTION-SCREEN COMMENT fmt name.
    Additions
    1. ... FOR TABLE dbtab
    2. ... FOR FIELD f
    3. ... MODIF ID mod
    4. ... ID id
    Effect
    Generates a comment on the selection screen. For the name name , there are two options:
    name takes the form TEXT-xxx where xxx is a three-character name for a text symbol. In this case, the contents of the text symbol are displayed at runtime, i.e. the text cannot be changed dynamically. name is another eight-character name. Here, you create a field with the name name in the length specified in the format fmt< /> and it is then generated as an output field on the selection screen. The contents of these comments must therefore be set at runtime (e.g. at INITIALIZATION or - in the case of comments in the database include program DBldbSEL - in the routine INIT of the database program SAPDBldb . They can also be changed when the selection screen is being processed.
    Note
    The field name is generated automatically and so cannot be defined with DATA .
    With comments, you must always specify a format fmt (see variant ULINE ).
    Note
    You must program a new line yourself via the format fmt .
    Addition 1
    ... FOR TABLE dbtab
    Note
    See variation 3 (SELECTION-SCREEN SKIP).
    Addition 2
    ... FOR FIELD f
    Effect
    Since the comment is assigned to a parameteror a select-option , the help display shows the documentation of the reference field if this parameter or selection option.
    In addition, the comment is suppressed if the reference object was set to 'invisible' via a selection variant.
    Note
    In database access routines, the comment is generated whenever the reference field is output. Therefore, you should not use the addition FOR TABLE with this variant.
    Example
    SELECTION-SCREEN BEGIN OF LINE.
      SELECTION-SCREEN COMMENT 10(20) TEXT-001
                       FOR FIELD PARM.
      SELECTION-SCREEN POSITION POS_LOW.
      PARAMETERS PARM LIKE SAPLANE-PLANETYPE.
    SELECTION-SCREEN END OF LINE.
    This code displays a 20-byte long comment followed by the parameter at the normal position ( POS_LOW ) on the same line. If the user presses F1 for both objects, the documentation of SAPLANE-PLANETYPE is displayed.
    Addition 3
    ... MODIF ID mod
    Addition 4
    ... ID id
    Thansk & regards
    Sreenivasulu P

  • Selection screen comment..getting error...!

    Hi..,
    My code:
    SELECTION-SCREEN COMMENT 80(2) text-027
    Error Which I am getting with above syntax:
    The specified offset "80" is too large (maximum:79)
    Q: How to slove this? and here I need that text 27 is in greater than 80th position only.
    Thanks,
    Naveen.I

    >
    Avinash Kodarapu wrote:
    > The maximum length to display text on the selection screen is 80 chars.
    No, You can exceed this limit.I'm able to display the screen text upto 83.
    >
    Gautham Vangaveti wrote:
    > I think it is possible only upto 79.
    Which version you are in?
    >
    Naveen Inuganti wrote:
    > So we can'nt able to adjust the screen offset here?
    No, you can set offset upto 83 position.
    Just run this below code:
    REPORT test.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 83(2) text-005."I have 'To' in text-005 and make sure length is 2
    PARAMETERS: p_li AS CHECKBOX DEFAULT 'X'.
    SELECTION-SCREEN END OF LINE.
    >
    Sathish Reddy wrote:
    > if you use comment statement with in the frame then you can't exceed 79.
    > if you use comment statement with in line then you can't exceed 83.
    That's true.

  • Trailing space when using SELECTION-SCREEN COMMENT

    Hi All,
    I need to display a continuous text (length :130) in selection screen. I am trying with SELECTION-SCREEN COMMENT option and i m aware that we can display max of 79 characters. So i split the text into length: 70 & 60 and coded as below
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(70) text-001.
    SELECTION-SCREEN POSITION 73.
    SELECTION-SCREEN COMMENT 73(60) text-002.
    SELECTION-SCREEN END OF LINE.
    Problem is: After displaying first text (text-001), there is a gap of 10-15 characters, then second text starts (text-002). I mean, there is a trailing space.
    If i give all text-001 in CAPS, then there is no trailing space. But i dont need to display the text in CAPS.
    Do i need to proceed in any other way?, please provide your inputs
    Vinoth

    Your SAPgui to use a proportional font for texts and descriptions (where "i" is much shorter than "W") when it use a non-proportional for input fields. But it use this non-proportional font for input fields even if input is not allowed.
    Try this sample to solve your problem. (But your text will be in a box)
    REPORT zfontst.
    CONSTANTS ctxt TYPE c LENGTH 80 VALUE 'AaBbCcDdEeFfGgHhIiJjKkLlMmNnOoPpQqRrSsTtUuVvWwXxYyZz'.
    PARAMETERS: p1 TYPE c LENGTH 56.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT (2) p2a.
    SELECTION-SCREEN POSITION POS_LOW.
    SELECTION-SCREEN COMMENT (56) p2.
    SELECTION-SCREEN END OF LINE.
    PARAMETERS: p3 TYPE c LENGTH 56 MODIF ID dsp.
    AT SELECTION-SCREEN OUTPUT.
      p1 = ctxt.
      p2 = ctxt.
      p2a = 'P2'.
      p3 = ctxt.
      LOOP AT SCREEN.
        CASE screen-group1.
          WHEN 'DSP'.
            screen-input = '0'.
        ENDCASE.
        MODIFY SCREEN.
      ENDLOOP.
    Regards,
    Raymond

  • REG hiding selection-screen comment

    Hi all,
    Cud any one tell me how to hide a selection-screen comment.

    hi chaitanya,
    see the example may be useful.
    SELECTION-SCREEN BEGIN OF BLOCK BLOCK.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(8) PWD.
    SELECTION-SCREEN POSITION 35.
    PARAMETERS: PASSWORD(8) MODIF ID AAA.
    SELECTION-SCREEN END OF LINE.
    PARAMETERS: PROGRAM(8).
    SELECTION-SCREEN END OF BLOCK BLOCK.
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF SCREEN-GROUP1 = 'AAA'.
          SCREEN-invisible = '1'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    reward if useful,
    thanks and regards

  • Selection screen comments

    Hi ,
    My requirement is to put the description ( in blue colour ) of the input field on the selection screen on the right handside of the field after the user enters a certain value.
    How do i go abt it..Plz help .
    Thanx nd regards,
    Srestha

    HI,
    check this example report it is doing the same.
    <b>REPORT zwa_test1 line-size 132 line-count 60.
    TABLES: fmfincode.
    SELECTION-SCREEN BEGIN OF LINE.
    selection-screen comment (11) text-004.
    parameters : fcode type fmfincode-fincode .
    parameters: fc_desc(50) MODIF ID FC  visible length 40 default 'abc'.
    SELECTION-SCREEN END OF LINE.
    AT selection-screen output.
    LOOP at screen .
      IF screen-group1 = 'FC'.
        Screen-input = 0.
        SCREEN-INTENSIFIED = 1.
        Modify screen.
      endif.
    ENDLOOP.
    at selection-screen on fcode.
    SELECT SINGLE beschr FROM FMFINT INTO fc_desc
    WHERE FINCODE = fcode.</b>
    REgards,
    HRA
    Message was edited by: HRA
    Message was edited by: HRA

  • ABAP Query Selection Screen Comment

    Hi,
      I want to display some text (just text) on Selection Screen of an abap query. If this was a regular abap program I could have simply used "SELECTION-SCREEN COMMENT... " and that would have been enough. But since I dont seem to have access to Initialize event I cant use this option.
    1.  Is there some way I can write code which will be executed in the initialize event of the abap query
    2. Is there some other way for us to just display comment (without any selection field) on the selection screen of abap query.

    Hi Saquib,
    Is the navigation correct ? I dont see any onfoset anywhere on se38 editor. Can you eloborate please.
    Thanks and Regards,
    Ben.
    Message was edited by: Daniel Ben

  • Selection screen comments in italic.

    Hi ,
    I have a requirement to display the selection screen comments in italic format.
    Please suggest.
    Thanks,
    Suchi.

    I am not a 100% sure but i think this is simply not possible.

  • Selection screen comment as input field

    Hi Experts,
    I have a comment in my program using following statement,
    SELECTION-SCREEN COMMENT 27(60) dispath.
    by default this statement is in output mode ...can we change that as input...
    Not to forget i dont want to use PARAMETERS.
    Thanks
    Sid

    Hi Sid,
    Only options possible in selection screen comment are:
    SELECTION-SCREEN COMMENT [/][pos](len)
                             {text|{[text] FOR FIELD sel}}
                             [VISIBLE LENGTH vlen]
                             [MODIF ID modid]
                             [ldb_additions].
    i  think its not possible.
    Regards,
    Talwinder

  • How to hide a selection screen comment ?

    Hi Experts,
    I have an issue in Interactive report...
    I know by using  LOOP AT SCREEN we can modify screen elements like HIDE ... in the AT SELECTION-SCREEN OUTPUT event
    But my question is i need to HIDE Selection screen comment also...I can this be achieved....???
    Please do reply me with a solution...
    Thanks in Advance...
    Reddy Arun

    Hi Reddy,
                  Please go through below code..
    it will fulfill ur requirements
    REPORT 123.
      PARAMETERS : RB_USER  RADIOBUTTON GROUP za .
    PARAMETERS :  RB_MAN   RADIOBUTTON GROUP za .
    PARAMETERS :  RB_MAN1   RADIOBUTTON GROUP za DEFAULT 'X'.
    AT SELECTION-SCREEN OUTPUT.
       PERFORM f13000_check_radio.
    FORM f13000_check_radio.
         IF rb_man1 = ''.
    LOOP AT SCREEN.
         IF screen-NAME = 'RB_MAN'.
           IF rb_man  = 'X'.
             screen-active = 0.
             rb_man  = ''.
           ELSE.
             screen-active = 1.
           ENDIF.
           MODIFY SCREEN.
         ENDIF.
         IF screen-NAME = 'RB_USER'.
           IF rb_user = 'X'.
             screen-active = 0.
             RB_USER = ''.
           ELSE.
             screen-active = 1.
           ENDIF.
           MODIFY SCREEN.
         ENDIF.
    ENDLOOP.
         ELSE.
           LOOP AT SCREEN.
         IF screen-NAME = 'RB_USER'.
             screen-active = 1.
                MODIFY SCREEN.
         ENDIF.
       IF screen-NAME = 'RB_MAN'.
             screen-active = 1.
           MODIFY SCREEN.
         ENDIF.
       ENDLOOP.
    ENDIF.
    ENDFORM.           " f13000_check_radio

  • Change Color of SELECTION-SCREEN COMMENT

    Hello!
    I want to change the color of the text of my comments for parameters in my selection-screen. Is that possible?
    What kind of design option do I have within the selection-screen? (Background, Colors, etc...)
    Regards Michael

    check out this sample code.
    REPORT YRJKSJKJFKD
           NO STANDARD PAGE HEADING.
    SELECTION-SCREEN COMMENT /1(50) comm1 MODIF ID mg1.
    SELECTION-SCREEN ULINE.
    SELECTION-SCREEN SKIP.
    SELECTION-SCREEN COMMENT /1(30) comm2.
    SELECTION-SCREEN ULINE /1(50).
    PARAMETERS: r1 RADIOBUTTON GROUP rad1,
                r2 RADIOBUTTON GROUP rad1,
                r3 RADIOBUTTON GROUP rad1.
    SELECTION-SCREEN ULINE /1(50).
    AT SELECTION-SCREEN OUTPUT.
      comm1 ='Selection Screen'.
      comm2 ='Select one'.
      LOOP AT SCREEN.
        IF screen-group1 = 'MG1'.
           screen-intensified = '0'.
           screen-color = '0' .
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    for screen-color the possible values are
    Syntax of color value in col color
    { COL_BACKGROUND } 0 GUI-specific
    { 1 | COL_HEADING } 1 Gray-blue
    { 2 | COL_NORMAL } 2 Light gray
    { 3 | COL_TOTAL } 3 Yellow
    { 4 | COL_KEY } 4 Blue-green
    { 5 | COL_POSITIVE } 5 Green
    { 6 | COL_NEGATIVE } 6 Red
    { 7 | COL_GROUP } 7 Violet
    Regards
    Raja

  • White screen and virtical blue lines

    I was playing Skyrim in bootcamp when my computer stopped working, I saw a brief error message which I didn't get a chance to read then the computer turned its self off.  Every time I try to restart the computer I get a white screen with vertical blue lines, then after a minute it goes grey. I have followed advise given to others with similar problems. Diagnostics does nothing, I've only managed to successfully run in safe mode once, but it will not run again. the only thing I am able to do is select the start up drive at the beginning using the option key but that's as far as I can get.
    running an imac 27" late 2009 upgraded to maverics. boot camp is windows 7.

    Hey db8179,
    Welcome to Apple Support Communities.
    The article linked below provides a lot of great information and troubleshooting suggestions that can help you resolve the gray screen startup issue with your iMac.
    OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
    Cheers,
    -Jason

Maybe you are looking for

  • Cannot play music purchased under old apple id after new hard drive installed

    Replaced crashed HD and used Time Machine to restore to 10.7.5. Had changed my Apple ID a while backe (couple months). Now music purchased with old ID will not play, asking me to authorize under old ID, have no idea what the password was and the emai

  • Bundled applications list(on mac os x) through programmatically.

    I would like to have a list of  bundled applications on mac os x. Is there any way of getting the list through programmatically? Any pointer on this would be appreciated.

  • Retrieve information from sales order at creation - How is it possible ?

    Hello, At sales order creation, a print program print a document with some information. In this print program I want retrieve some information lilke customer name etc etc ... But the table like VBAK/VBAP are empty because I'm in creating ... so do yo

  • Cisco Works LMS 4.0 - Fault Monitor Issue

    Hi!,      I have a little problem with the LMS application. when I try to access to the screen of: Monitor --> Monitoring Tools --> Fault Monitor, the application shows an error message that only said: "Sorry an error occurred" and thats all. Any ide

  • Info about imp and exp

    Hi everyone I need you to test If the work I will do is right or not . in general:- I want to take full export from database 10g and I want to import it in oracle database 7.3.2 in details:- I will execute catexp7 on database 10g and after that I wil