Select Items on Slide (tab?)

In Powerpoint, using the tab key, selects individual objects and text boxes on a slide. Is there anything like that in Keynote.
Thanks.

Tab selects objects (in order of depth) from back to front and Shift-Tab selects objects from front to back. So, if you're pressing Tab a few times and have found that you've gone past your target, just hold down Shift and press Tab and you won't have to go through the entire stack again

Similar Messages

I can only open a new tab by right clicking on an item in an already open tab and selecting open in new tab

I can only open a new tab by right clicking on an item in an already open tab and selecting open in new tab. Nothing else works e.g. File, New Tab, or clicking on the New Tab to the right of the last tab.

Uninstall the '''''Ask Toolbar'''''. It can cause that problem.
*http://support.mozilla.org/en-US/kb/Uninstalling+add-ons
*http://support.mozilla.org/en-US/kb/Cannot%20uninstall%20an%20add-on
*http://kb.mozillazine.org/Uninstalling_toolbars
If that does not solve the problem:
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
*See --> [http://support.mozilla.org/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
*See --> [http://support.mozilla.org/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

6.1 Print Templates - auto select items in the print dialog popup

In the slide deck I have about 6.1 it says the following:
•Print Templates
–Print templates can now be used to auto select items in the
print dialog popup. By default, the out of the box template
selects the current specification
Unfortunately I haven't been able to find how to do this in the EP documentation. Could someone point me in the right direction on how to do this?

Download Extensibility Pack 2.6. It was just released. Take a look at page 11 in the Print Extensibility Guide. It should have the info you need. If not let me know.
Here is the link for the downloads:
https://support.oracle.com/CSP/ui/flash.html#tab=PatchHomePage(page=PatchHomePage&id=h1j503ev())

No selectable items exist for purchase requisition l_banfn

Hi,
While creating PO with ref to PR getting the below error :
no selectable items exist for purchase requisition l'banf .
Checked if the PO is created, its not created,.
checked if the item is blocked/cancelled/deleted. Nothing is set.
PR looks fine. Dont know if any authorization data is missing?

Check the status tab in ME53N whether all the qty in PR are already used up
Or
Check the line item in PR whether it is deleted
Edited by: Karthik on Jul 20, 2011 12:37 PM

The 'selected items' color randomly changes and I can't figure out why.

Hi everybody, I recently upgraded to Firefox 13, which appears to be the most stable browser version so far and I really like it. I have loved Firefox very much, having used it since somewhere between versions 2 and 3.
After upgrading to version 13 I noticed something that annoys me quite a bit. This may have been present before but I can't remember and I did not notice until now.
On my computer (Windows 7 x64 Ultimate) I have set the color of the 'selected items' (specifically text) to be lime green text on a slightly off black background. I chose this color scheme because it blends very well with Firefox itself (I have the NASA night launch theme), Windows Explorer, and many web pages that I have changed to a dark theme (using the Stylish browser extension). This color scheme has excellent contrast in areas with black text on a light background, as well as light text on a dark background. It has served me well.
After upgrading to Firefox 13 I have noticed that if the web page is dark with light text, the 'selected items' color changes to lime green text on a light grey background. (Less frequently, it changes instead to off-black text on a lime green background). I have not been able to isolate the threshold where this change occurs (meaning how dark the website background needs to be /how light the text needs to be for this to happen) nor have I found a solution.
This problem sometimes extends even to sites that have dark text on a light background: when tabs are switched, with no input fields clicked and the address bar is not clicked. This very page (Firefox support) is apparently vulnerable as well.
This problem only happens on rendered web pages. Firefox's menus, buttons and toolbars, as well as all other programs and Windows itself, are unaffected.
I want the 'selected items' to remain as I have set it, and not deviate regardless of the apparent contrast or color scheme of the web page being displayed.
[Edit #1]: Interestingly, as I was copying the information from about:support I noticed that it is affected as well.
Any suggestions? Thanks so much, and I am sorry for the long-winded description. tl;dr look at the pictures.
[http://i.imgur.com/vmLZ6.png selected items]
[http://i.imgur.com/d8xsa.png example1]
[http://i.imgur.com/2OE9J.png example2]
[http://i.imgur.com/1lhvb.png example3]
[http://i.imgur.com/UWOOp.png example4]

It is always best to avoid making changes to the selected text colors. 
Firefox uses an algorithm to check if the contrast is sufficient and will swap text and background colors if that test fails. 
*http://mxr.mozilla.org/mozilla-central/source/layout/generic/nsTextFrameThebes.cpp#3349
*http://forums.mozillazine.org/viewtopic.php?f=38&t=1331845

Migo cannot be done " PO does not contain any selectable items"

Dear SAP Gurus
We have a very urgent issue, while trying to do MIGO for a particular standard PO.
Some down payments have been done to this PO already and now when we try to do the MIGO, system is giving the error "PO does not contain any selectable items"
The accounting document which is created when the down payment is done can be seen in the purchase order History.
Please suggest soem solution
Thanks
kk

Hi Kavitha,
Please check whether all the po item quantities are received. If any open line items are there then go to item detail po tab in that Select Confirmation Tab and Check whether the confirmation is Z001. Change it to 0001 etc and save.
Try this, if unresolved revert back.
Reg,
Ashok
Assign points if useful.

Document 4500016031   does not contain any selectable items

Hi Friends,
I am doing MIGO(godds receipt) and adopted following procedure for MIGO.
ME5J----->(Entered my Proj. defn---> executed
Select material T-20610.
Click the "Assign automatically" pushbutton.
Assign materials T-20620 and T-20630 the same way.
Display the overview of the assignments and then create the purchase order.
Click the "Assignments" pushbutton.
The purchase requisitions are sorted in the overview according to their assignments. You can create new purchase orders by clicking the "Process assignment" pushbutton.
Place your cursor on the line below vendor "C.E.B.".
Click the "Process assignment" pushbutton.
Confirm the first dialog box by clicking the "Continue" pushbutton.
If another dialog box appears, click "New purchase order".
The purchase order appears.
On the left-hand side of the overview, select your three purchase requisitions and copy them to the purchase order.
Click the "Copy" pushbutton.
Save the purchase order.
Click the "Save" pushbutton.
The purchase order number appears in the status bar.
Make a note of the order number:   ____4500016031________
Now I got the PO as per above procedure Now While I am doing MIGO---Goods receipt am getting the below message.
Any pointers is appreciated and will be rewarded.
Document 4500016031(PO)   does not contain any selectable items
Message no. M7064
Diagnosis
The document or document item entered cannot be adopted.
Possible reasons for this are:
o   The document items have already been processed
        (Suggest zero lines indicator set?).
o   the document items have been deleted or are blocked.
o   the document items have been created for a different plant.
o   (for reservations only) movements are not yet allowed for the
        reservation items.
o   (for reservations only) the document items are retrograde components
     of the order. These are posted using the order confirmations.
o   A confirmation must exist for the document items.
o   The document items must be released first.
o   The document is an R/2 document.
Procedure
Make sure your entries are correct.
o   If the system has already processed the total quantity, you can set
     the Suggest zero lines indicator. The system will suggest the
     quantity zero for the items that have already been processed.
o   If you have entered a particular item, cancel the item. If you do
     not enter an item, the system searches all of the open items in the
o   If the document is a purchase order, production order or a
     reservation, you can enter search criteria in the dialog box.
     You access the dialog box by choosing Enter with reference on the
     initial screen.
o   If the document is an SAP R/2 document, you have to cancel it
     manually by entering the reversal movement type.
Regards

Hi
Check item level Confirmation tab I think this PO is activated for Inbound delivery or Confirmation control
vIVEK

Selected Items initially inactive

Dear Sir,
On using FS00, (Open items tab) when i select "Selected items initially inactive", the customer and vendor open items are inactivated on selection.
But when i use t-code F-19 to reverse book a statistical entry I find all items active. What config i need to do to ensure that even these items are initially inactive
Thanks
Sanjay

Hi Murali
I had done the settings exactly as per your instructions. But still not working.
I still get all items active
Please can you assist where else i need to check
thanks
Sanjay

Purchase order from Purchase Requisition error no selectable items found

while modifying the Purchase order item quantity, iam getting an error
Tcode me22n.
The order already released. now i want to ( change ) reduce the quantity.
No selectable items exist for Purchase requisition l_banfn.
message no 06053.
can anyone please help me on this.
thanks
rajesh.

Check the status tab in ME53N whether all the qty in PR are already used up
Or
Check the line item in PR whether it is deleted
Edited by: Karthik on Jul 20, 2011 12:37 PM

Controls in ITEM and LIST tabs of Ribbon disabled always in Punishing SharePoint 2013 site if i add list to home page as List View Webpart

Hi,
Below is the scenario,
If i created any custom list and navigating to the list (AllItems.aspx) and on selecting the item, i can see controls in ITEM and LIST tabs of Ribbon are enabled in SharePoint 2013 publishing site.
If i add the same list in the home page (add web part --> select list view webpart) in the publishing site, on selecting of item, all controls in ITEM and LIST tabs of Ribbon are disabled always.
Please help me to fix this issue ASAP.
Regards,
Krishna

Hi,
Thanks for your reply.
Ribbon controls (only ITEM and LIST tab) still in disabled mode even if i selected the item in the list view webpart.
Also, i have noticed the below things,
when i create a published site (default page : default.aspx) and add the list view webpart in the default page, the controls are in disabled mode on selecting item in list view webpart.
when i create a team site (default page : home.aspx) and add the list view webpart in the default page, the controls are in enable mode on selecting item in list view webpart.
Please help me on this.
Regards,
Krishna

Why does right clinking on link and selecting open in new tab does not work?

Why does right clinking on link and selecting open in new tab does not work?
It opens up a blank page. The only way to make the link work is to click on the navigation bar in the new tab and press enter to reload the link.

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. 
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

"No selectable item exist for purchase requisition I_Banfn"

Dear all
While creating Po system show a massage"no selectable item exist for purchase requisition I_Banfn"
Please help.

Hi,
PR status in status TAB in item details You have following:
Processing status :Specifies the current processing status of the purchase requisition: IS PO Created or RFQ created etc...
Block ID:The requester (PR creator)can block a requisition item to prevent it from being converted to a purchase order
Processing State: Released or not Released
You need check above & then act to unblock if blocked , release it if it is not released or check if this PR already converted to PO.
Follow the steps to create PO from PR:
Enter ME21N T.Code
Click u201CDocument Overview onu201D
Click u201CSelection Variantu201D and Select Purchase requisition and double click & Execute
Now you will PR Numbers,Select your PR Number , you will have line items(10,20,30 etc..) , you will have all the details of PR (like item category,material , quanitites for each line items) and Now click u201CAdoptu201D and u will see all PR related copy to PO.
Regards,
Biju K

Transport of selected item into other picture

how to transport a selected item into an other picture?

In Editor, go to the expert tab.
Open picture B, the one you wish to select something from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position object from picture B.
In the layers palette you should see picture A as the background layer, and object B on a separate layer.

How do I get rid of "Selected Item" window?

Just updated iTunes to version 7.5 and I notice a window below the listings of my playlists (left side of screen), thus reducing the number of playlists that I can see. I would rather that the "now playing/selected item" window not be there so I can see more of my playlists and reduce scrolling. Is it possible? Thanks.

If your CDs are marked as Compilations then you can see them by switching on the compilations feature in the browser. Go to Edit>Preferences>General and check the box "Group Compilations when browsing". When you switch the browser on Compilations will be the first item in the Artist pane, click on it and your compilations will then be listed in the Album pane. If you made these CDs yourself you'll need to mark all the tracks as part of a compilation and give them an album name (you can use the name of your playlist for example). To change the info on multiple items such as all the songs in a playlist, click on the first track you want to add information then while holding down the shift key click on the last track in the list, this will highlight all in between. Right click on the list and choose Get Info, you get a dialogue box asking if you want to update multiple items, click Yes and then the Info tab. Type in the album name and choose Yes from the drop down menu below "Compilation" which is on the bottom row of the info window then click ok and this will ensure the whole selection is identical.

Automatic Selected Item of List Builder Component Does not work (anymore)

Hi all,
Í'm working with Xcelsius Engage 2008 (version 5.3.2.0) and the automatic selection of an item at runtime of the list builder component does not work anymore. In a previous version it worked very well.
Here's the case: at runtime I want that the list builder component automatically puts the first item in the list to the destination section and selects it, so that a graph can show the underlying pushed data. In the previous version it worked o.k., but now at runtime the destination section remains empty at startup. If I interactively select an item from the source section to the destination section and update the list builder, the data is shown correctly, but it must done automatically, which worked o.k. in an earlier version of Xcelsius 2008...
This are my settings of the list builder component (which was running correctly earlier..):
-at the general tab I defined a range of labels
-at the general tab I defined 2 data column insertion series
-at the behaviour-common tab I defined selected items: position mode; items: the first item of the label list; insert items at runtime
-all of the data comes from an external xml data source
You can find an example of the visualisation at: http://onderzoek2.evinet.nl/projecten/10169/dynarap.htm. You will see that at start-up there is no item visible and selected in the destination section of the list builder....
I've tried every combinations of settings, build up the component from scratch, but its not working (anymore).
Greetings Erik-Jan Vriens

Hi njnits,
Print view button is a standard component of Xcelsius: look at it in the IDE
Exporting to Powerpoint is also a standard functionality, so yes. For this particular dashboard/report all data resides in an external xml-file which have to be accessible for Powerpoint
All visualisations, not only the table, in this/report fetch their data from an external xml-file, but a QaaWS-connection will also do the trick. You will have to write this dedicated service. In our case the xml-data is also generated automatically.
The external data is best defined as a sort of matrix, consisting of approx. 100 columns by 1000 rows. I agree it takes a lot of Xcelsius but it does the job....
Hopes this info helps....

Select Items on Slide (tab?)

Similar Messages

Maybe you are looking for