Select List View All submit option

Hello everyone,
I currently have a select list that each value is a submit page item. Is there an option to combine all values and have a view all value in my select list. Please let me know of any options.
Thanks
Ryan

Hi All,
Got a message from cini007, but I get an error message when I want to reply to that message. I have copied the "solution" below.
I have tried this, but it's not working. The only thing happening is it has changed the dates randomly.
Although I have been looking for the auto shut-off option. I can't find that option only in the alarm clock options?
cini007 posted "Re: iPhone calendar + List View All Calendars option (MobileMe)" in "iPhone calendar + List View All Calendars option (MobileMe)" on Mar 9, 2010 8:20:57 AM.
I had Genius Bar visit with same issue—no go (was advised to reset to factory settings).
BUT here is the SOLUTION as it happened again:
1. set auto shut-off to never
2. turn OFF MobileMe syncing for calendars on the iPhone (from Settings menu)
3. wait for calendar entries to be removed—takes minutes if you have several calendars
4. hard reset iPhone (press Home and On/Off at the same time for >5 seconds), and wait 2 minutes (about the time to reboot)
5. restart iPhone
6. turn ON MobileMe syncing for calendars on the iPhone (again, from Settings menu)
Message was edited by: Arjon Stellinga
Message was edited by: Arjon Stellinga

Similar Messages

  • IPhone calendar + List View All Calendars option (MobileMe)

    Hi all,
    I'm trying to fix a problem, which maybe there for some time already, in the iPhone Calendar. I'm using MobileMe to sync contacts and appointments. All my devices are up-to-date to the latest levels of firmware and software.
    I have a normal calendar in iCal and some subscribed calendars. Ther's no difference in both type of calendars.
    This is what's happening.....
    - Individual calendars are all looking perfect in List, Week and Month view.
    - All Calendar option is looking good in Week and Month view.
    - All Calendar option is bad in List view mode.
    When selecting the last option the Today date is changed a couple of days (Today = Wednesday 10-3), but also appointments are on different days. For example the soccer games on Saturday (6-3) and Sunday (7-3) are now changed to Tuesday (9-3) and Wednesday (10-3).
    I have the same calendar on my other iPhone and nothing weird going on over there?!?
    Does somebody have a clue?
    PS. The calendars for this (MobileMe) user are all correct on the other Apple devices.
    Thanks!
    Regards,
    Arjon G. Stelinga

    Hi All,
    Got a message from cini007, but I get an error message when I want to reply to that message. I have copied the "solution" below.
    I have tried this, but it's not working. The only thing happening is it has changed the dates randomly.
    Although I have been looking for the auto shut-off option. I can't find that option only in the alarm clock options?
    cini007 posted "Re: iPhone calendar + List View All Calendars option (MobileMe)" in "iPhone calendar + List View All Calendars option (MobileMe)" on Mar 9, 2010 8:20:57 AM.
    I had Genius Bar visit with same issue—no go (was advised to reset to factory settings).
    BUT here is the SOLUTION as it happened again:
    1. set auto shut-off to never
    2. turn OFF MobileMe syncing for calendars on the iPhone (from Settings menu)
    3. wait for calendar entries to be removed—takes minutes if you have several calendars
    4. hard reset iPhone (press Home and On/Off at the same time for >5 seconds), and wait 2 minutes (about the time to reboot)
    5. restart iPhone
    6. turn ON MobileMe syncing for calendars on the iPhone (again, from Settings menu)
    Message was edited by: Arjon Stellinga
    Message was edited by: Arjon Stellinga

  • My file names have disappeared in grid view. Thery have been replaced with a dark bar along the bottom of the previews. If I toggle using the command u it hide the bar but I still can't see the file name. In list view all the file names are OK.

    My file names have disappeared in grid view. Thery have been replaced with a dark bar along the bottom of the previews. If I toggle using the command u it hide the bar but I still can't see the file name. In list view all the file names are OK.

    The dark bar is caused by the option "Show metadata below image".
    Check the settings for the metadata overlays in Grid view (basic and expanded) by clicking the little "badge" icon below the Browser and selecting "Edit". Is the filename still enabled in the list? And in a high enough position to have precedence for other metadata tags, if the space does not suffice to show all selected tags?
    Regards
    Léonie

  • How create LOV(select List) with all LDAP users

    Hello,
    I am trying to create a selected list with all the users in my LDAP, note my LDAP is synchronized with my OID.
    Any suggestions, I'm searching the the pl/sql statment?
    Thanks
    Hussam

    Hi Hussam,
    Take a look at my comments in the following two threads -
    Re: LDAP
    Re: Cookie And LDAP
    The two different threads discuss the methods I use to do what you want to do (so you really need to 'combine' the two different threads).
    Hope this helps

  • I have one specific library that when I select the "view all clips" in the browser drop down box, FCPX locks up.  Rebuild the library?  What would be the best method?

    Final Cut Pro locking up when view all clips selected in the browser.

    Russ H,
    Yes, Force quit is the only option.  No background tasks running, nothing on FCPX works, save I can move the beach ball around.
    All the other menu options work fine.  In fact, FCPX works in the library except when I select view all clips in the browser.
    I am running Version 10.1.3 .  It is only this library that has the problem.  I am a new user so I only have three or four libraries so far.  Most on the same local external drive.
    The only difference I have been able to determine is the library in question has files on my boot drive as well as the local external.  Could that be the issue?
    Thanks for the prompt reply!

  • Report -- filter with selection list -- show all values after select page

    Hello!
    I have the following problem:
    - I have a report
    - this report can be filtered with a selection-list
    - the selection list is based on dynamic LOV and has a null-value
    - I added the code of the report the following, to filter the report after choosing a value of the selection list:
    ... and (instr(type, decode(:P8_FILTER_type, '%null%',type,:P8_FILTER_type)) > 0)
    This works very well.
    But my problem is: When the user logs out and the next time, he logs in, the selection list shows " --- show all values --- " (my null-display-value) and the report is empty "no values found".
    ---> I want to show the first time, the page is selected ALL the values of the report. (this is now only possile if I press the button which belongs to the selection list)
    I hope, somebody understands my problem.
    Thank you so much,
    LISA

    Hello Lisa,
    The first time it's probably NULL.
    So what you can do in your where: (instr(type, decode(NVL(:P8_FILTER_type,'%null%'), '%null%',type,:P8_FILTER_type)) > 0)
    Off topic: I also wonder if that where clause can't be simpler? Do you rely need the instr?
    Regards,
    Dimitri
    http://dgielis.blogspot.com/
    http://www.apex-evangelists.com/
    http://www.apexblogs.info/

  • Phone List View: "Call Log" Option Not Available

    I recently upgraded from BB 8830 to BB 9630. With the 8830, I was able to display my Call Log on the phone screen, but I can't seem to make it happen with the 9630. According to the User Guide for the 9630, I should be able to change the Phone List View field to "Call Log." However, "Call Log" does not appear in the drop-down list of options on my BB. My choices are Most Recent, Most Used, and Name. What am I missing? Please help!

    If this were possible, there would be a setting for this.
    Not possible.

  • "View All" Mail Option Gone!

    I seem to have inadvertently deleted the option in mail on my iphone 5 to view all mailboxes. My mailboxes are all there individually, but there used to be an option above all the mail boxes to "view all" mailboxes. Does anyone know how to restore this?

    that happened to me the other day... here's what i did (hope it works for you)
    1.  Click on Mail  (go to view where you can see all of your Mailboxes)
    2.  Click EDIT
    3.  CHECK the ALL Inboxes option 
    4.  Click Done - you should be able to see it now
    when this happened to me, somehow i had unchecked it, only the CHECKED items appear

  • TS1424 Why does my I pad go into shutdown mode after I make selection to view all video.

    why does my I pad go into shutdown  mode after i choose  video/episode  to  view?

    Hi marie140,
    Welcome to Apple Support Communities.
    It sounds like your iPad isn't behaving as we'd expect.
    The advice in these links can be very helpful with resolving an iPad issue:
    iPhone Assistant
    http://www.apple.com/support/iphone/troubleshooting/
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Best,
    Jeremy

  • Why do I occasionally lose all the tags from my inbox messages, when I haven't selected the remove all tags option?

    I'm running TB 31.0 on a Win7 laptop. This is a university work account, which is an IMAP type of account.

    From what I could gather talking to the tech folks, it does, but it's pretty basic.

  • By Default All Value Into Select List,If Select % In select List

    Hi ,
    i have created application process to extract state name in select list based on city name.
    Now i need if i don't have city name and i have select % into City Name select List then All State Name Should Come into Select List.
    Right Now if i select % into select List then It show me Blank In to state Name Select List.
    How can i extract All State Name if i select % Into Select List.
    My Application Process
    BEGIN
      OWA_UTIL.mime_header ('text/xml', FALSE);
      HTP.p ('Cache-Control: no-cache');
      HTP.p ('Pragma: no-cache');
      OWA_UTIL.http_header_close;
    htp.prn('<data>');
       HTP.prn ('<select>');
       FOR c IN (select S.NAME,S.CODE from STATE_MAS S,CITY_MAS C where C.STATE_CODE=S.CODE AND C.CODE =:SELECT5)
    LOOP
      HTP.prn ('<option value="' || c.CODE || '">' || c.NAME || '</option>');
       END LOOP;
       HTP.prn ('</select>');
    htp.prn('</data>');
    END;My City Name Table
    CREATE TABLE  "CITY_MAS"
       (     "CODE" VARCHAR2(3) NOT NULL ENABLE,
         "NAME" VARCHAR2(1000) NOT NULL ENABLE,
         "STATE_CODE" VARCHAR2(3) NOT NULL ENABLE
            )My State Name Table
    CREATE TABLE  "STATE_MAS"
       (     "CODE" VARCHAR2(3) NOT NULL ENABLE,
         "NAME" VARCHAR2(50) NOT NULL ENABLE
    /How can i do this.
    Thanks
    Edited by: 805629 on Jan 25, 2011 2:06 AM

    select S.NAME,S.CODE from STATE_MAS S join CITY_MAS C on (C.STATE_CODE=S.CODE)If you join two table you must have some equal data between this tables. and define it on your sql. Else you join will be cartesian join. if you dont want use this sql then create view
    create view TEST1 as (
    select S.NAME,S.CODE from STATE_MAS S,CITY_MAS C where C.STATE_CODE=S.CODE
    select * from test1 where  C.CODE =:SELECT5 OR :SELECT5 = '%' Edited by: Adigozalov Gurban on Jan 25, 2011 3:46 PM

  • Simple select list with submit solution

    hello,
    i read all the topics on select list with submit bottton but couldn't get it to work in my app.
    i have a form on a table( create with a wizard). i have 2 fields that i converted from text field to select list (first with submit and the second depand on the value of the first).when the 1 lov source type is db column then it can't save the value after the submit.
    when i change the first lov to somthing else and set the source used to "only when current . . " i get a null value in the table.
    how can i save the state of the first lov and still get the insert to work ? please guide me step by step .
    here is the first love definition:
    select cat_desc,catid
    from category_main
    order by catid
    the second lov:
    select cat_desc,catid_sub
    from category_sub
    where catid = :p36_mcategory
    the proccess is Automatic Row Processing (DML)
    thanks

    thanks for the answer
    i will try clarify my problem
    i create a form with a form on table wizard
    the desc table is
    bugid pk
    mcategory (main category)
    scategory (sub category)
    the mcategory,scategory need to be cascade lov so i changed what the wizrd created for me (text field) to lov.
    i changed the mcategory to lov with submit.
    i created a branch to the same page for the lov.
    when i run the app and change the mcategory the page submit but does not save the change.
    i also cant change the source used to "only when curren ..." because the source type is "db coulmn"
    thats my problem , i just want to create a cascade lov on this form .
    here is the example
    http://htmldb.oracle.com/pls/otn/f?p=19496

  • I seem to have lost "list view" for my iTunes library.  The option doen't even appear on the view drop down.  Any conncection to iCloud?

    I seem to have lost the ability to select list view for my iTunes library.  The choice for lst view doesn't even appear on the drop down when selectiogn "view".  Any ideas?  I recently enabled the cloud and subscribed to iTunes Match/  Any connection?  Thanks/

    See this thread for background on why iTunes can end up with duplicates and how they can be systematically removed. The script there is for Windows users and the "show duplicates" menus have moved around in iTunes 11,  but the advice on clearing recently made duplicates should still hold.
    As given in my older post "Reorganize library" is meant as a one time command to change the structure of a pre-iTunes 9 library into the newer layout that places music in its own subfolder of the media folder. Once used, if the option becomes available again that suggests that a file called .iTunes Preferences.plist in the media folder has been deleted or editied.
    See also this post.
    tt2

  • How to populate another page item based on cascading select lists?

    Oracle 10gXE
    APEX 3.2
    I've created cascading select lists based on the examples (using Javascript and AJAX) that i've seen on this forum. Thanks for help on that!
    Now that I have these LOV's being populated without needing to submit the page, how do I take the value that is presently in each LOV and concatenate them together to populate another page item? I'm trying to build the URL string that will execute an Oracle Report once the user clicks a button.
    Previously, when I had multiple Select Lists with a submit, the URL was being put together using an After Submit Computation that would set the value for an item (P26_REPORT_URL) on the page. Notice that a report parameter (i.e. parameter name and Select List value) is only included if the user has provided a value. The page item that holds these values is then referenced by a button for URL redirect. The URL Target for the button currently is: javascript:popupURL('&P26_REPORT_URL.'), but will not work at the moment because P26_REPORT_URL page item is not changing based on what is selected in the LOVs. Since I'm not submitting anything (do I need to?), how do I put together the values needed?
    Computation for P26_REPORT_URL:
    DECLARE
    l_param VARCHAR2(2000);
    BEGIN
    l_param := '&REPORTS_URL.&report=&P26_RPT_VIEW..rdf&desformat=&P26_DESFORMAT.&destype=cache';
    IF REPLACE(:P26_OLO_CODE,'%'||'null%',NULL) IS NOT NULL THEN
    l_param := l_param||'&p_olo_code=&P26_OLO_CODE.';
    END IF;
    IF REPLACE(:P26_BEG_DATE,'%'||'null%',NULL) IS NOT NULL THEN
    l_param := l_param||'&p_start_dt=&P26_BEG_DATE.';
    END IF;
    IF REPLACE(:P26_END_DATE,'%'||'null%',NULL) IS NOT NULL THEN
    l_param := l_param||'&p_end_dt=&P26_END_DATE.';
    END IF;
    IF REPLACE(:P26_ORG_CODE_2,'%'||'null%',NULL) IS NOT NULL THEN
    l_param := l_param||'&p_org_code=&P26_ORG_CODE_2.';
    END IF;
    IF REPLACE(:P26_FLAIR_ORG_2,'%'||'null%',NULL) IS NOT NULL THEN
    l_param := l_param||'&p_flair_org_code=&P26_FLAIR_ORG_2.';
    END IF;
    IF REPLACE(:P26_BUDGET_ENTITY_2,'%'||'null%',NULL) IS NOT NULL THEN
    l_param := l_param||'&p_agy_code=&P26_BUDGET_ENTITY_2.';
    END IF;
    RETURN l_param;
    END;

    Andy,
    This is a great suggestion! After I posted, I started looking at a Javascript solution and figured it's probably what I had to do.
    However, now the cascading select list no longer working for some reason after I added the function to concatenate the item values. When I remove the showReport() function the select list works again.
    Here is what I have in the HTML Header portion of the page:
    <script language="JavaScript" type="text/javascript">
    function popupURL (url) {
      w = open(url,"winLov","resizable=1,width=800,height=600");
      if (w.opener == null)
      w.opener = self;
      w.focus();
    function showReport()
      var l_param = '&REPORTS_URL.&report=' + $v('P26_RPT_VIEW') + '.rdf&desformat=' + $v('P26_DESFORMAT') + '&destype=cache';
      if ($v('P26_OLO_CODE' != '')
       l_param += '&p_olo_code=' + $v('P26_OLO_CODE');
      if ($v('P26_ORG_CODE_3' != '')
       l_param += '&p_org_code=' + $v('P26_ORG_CODE_3');
      popupURL(l_param);
      function get_AJAX_SELECT_XML(pThis,pSelect){  
         var l_Return = null; 
         var l_Select = $x(pSelect); 
         var get = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=ORG_SELECT_LIST',0); 
         get.add('TEMPORARY_ITEM',pThis.value); 
         gReturn = get.get('XML'); 
         if(gReturn && l_Select){ 
             var l_Count = gReturn.getElementsByTagName("option").length; 
             l_Select.length = 0;
             for(var i=0;i<l_Count;i++){ 
                 var l_Opt_Xml = gReturn.getElementsByTagName("option");
    appendToSelect(l_Select, l_Opt_Xml.getAttribute('value'), l_Opt_Xml.firstChild.nodeValue)
    get = null;
    function appendToSelect(pSelect, pValue, pContent) { 
    var l_Opt = document.createElement("option");
    l_Opt.value = pValue;
    if(document.all){
    pSelect.options.add(l_Opt);
    l_Opt.innerText = pContent;
    }else{ 
    l_Opt.appendChild(document.createTextNode(pContent));
    pSelect.appendChild(l_Opt);
    </script>

  • How do I get albums to display as list view?

    For the last several "Upgrades" I cannot get iTunes to display my albums in a "list View" only as pictures of the cover art.  I have gone into "Edit>Preferences>General" and checked "Show list views all media" with no result.  It seems they left me in the dust by making it "Better!"  Is there any way to make it display my albums as a list?

    Hi,
    Go to "songs" view and i think you will find what you are looking for.  This view looks a lot like the view i used in the previous version . 
    If you select view -> view options (command-j) you will see all the familiar choices.  BTW - some options may be hidden (collapsed) so you may have to expand them by clicking on the arrow next to the category heading.  Hope this helps.
    I've been looking for this answer since the new version came out. This is the article i found it in.
    http://blogs.computerworld.com/desktop-apps/21414/first-look-apples-pretty-itune s-11s-speed-demon  

Maybe you are looking for