Select maintenance option for EHP4 FOR SAP ERP 6.0 / NW7.01.

Dear Experts,
We have solution manger 7.0 ehp1 ,
ERP 6. 0 EHP4 Development server(seperate server) this is upgraded from erp 6.0 to erp 6.0 ehp4
I configured the maintenece optimzer also. and created the RFC destinations also it is working fine. For downloading the support packages  In Miantenance optimizer I am getting the error.
Select maintenance option for EHP4 FOR SAP ERP 6.0 / NW7.01
I deleted the systems in SMSY and and recreated using the SLD refresh. Agin also I am getting the sama error for downloading the support packages. I chagned the systems details in the Service.sap.com also. in the logs it is showing the below error also
No Addon Product Version allowed for transaction: EHP4 FOR SAP ERP 6.0 / NW7.01 (01200615320900003195)
thanks

Hello,
we have the same error in our environment.
Product version is EHP4 for ERP6.0 and we have both product version (EHP4 and ERP 6.0) active in the SMSY as described in SAP note 1464712 and nethertheless we get this error message.
" No Addon Product Version allowed for transaction: EHP4 FOR SAP ERP 6.0 / NW7.01 (01200615320900003195)"
Anyone with a solution here?
Greets
Jens

Similar Messages

  • CRM 5.0 Compatibility with backend upgraded to EHP4 FOR SAP ERP 6.0 / NW7.0

    Hello,
    What are the  compatibility issues for EHP4 FOR SAP ERP 6.0  Upgrade with CRM 5.0 ? Are there any OSS notes to address upgrade specific issues?
    Following are the System Details:
    Upgraded EHP4 FOR SAP ERP 6.0 / NW7.01
    Component: SAP_APPL 
    Release:      604
    Support Pack: SAPKH60402
    Level:  0002
    Existing CRM 5.0
    Component:     BBPCRM
    Release: 500
    Support Pack: SAPKU50006
    Level: 0006
    Thanks,
    AG
    Edited by: Arijeet Ganguly on Sep 15, 2009 11:49 PM

    Hi Amirsd,
    You will need to use your Solution manager system to apply EHP 4 to your newly installed system.
    Use MOPZ to generate XML file which contains the packages to be downloaded to upgrade your current system to EHP 4.0
    After that download EHPI tool from SAP Marketplace and use EHPI tool to install downloaded packages.
    It would run in 7 phases including downtime phase.
    Let me know if you have any queries. !!!!
    Regards,
    Shobhit Garg

  • Is Stack configuration XML file needed for EHP4 installaton on ERP 6.0 SR2

    Hello ALL,
    Is Stack configuration XML file needed for EHP4 installaton on ERP 6.0 SR2,THE GUIDE SAYS IT IS OPTONAL
    is it?
    Rohit

    The central installation note
    Note 1143022 - Installation of SAP Enhancement Package 4 on SAP ERP 6.0
    says, that the Solution Manager Maintenance Optimizer should be used to generate the stack file to avoid any problems.
    Markus

  • EHP4 FOR SAP ERP 6.0 / NW7.01

    I am new to SAP and have successfully Installed SAP ERP 6.0/NW 7.01 on Windows Server 2008 R2 with Oracle 10g. We would like to go ahead and apply the enhancements Package 4 to ERP 6.0 (SAP Enh. Package 4 for SAP ERP 6.0 1). I have no knowledge on how to install Enhancement packages.
    Can someone please guide me on what is needed. What program or utility I can use to apply the EHP4. Any tips or direction would be would be nice.

    Hi Amirsd,
    You will need to use your Solution manager system to apply EHP 4 to your newly installed system.
    Use MOPZ to generate XML file which contains the packages to be downloaded to upgrade your current system to EHP 4.0
    After that download EHPI tool from SAP Marketplace and use EHPI tool to install downloaded packages.
    It would run in 7 phases including downtime phase.
    Let me know if you have any queries. !!!!
    Regards,
    Shobhit Garg

  • Upgrade MS SQL 2005 to MS SQL 2008 (R2) for High-Availability SAP ERP System

    Hi,
    We are having ECC 6.0 SR3 Hight-Availability system on windows cluster environment.
    Our platform is Windows Server 2008 SR2  with MS SQL Server 2005 SR3. We have two nodes in our windows cluster. Active-passive nodes.
    Node-1 is having CI, ASCS, ERS & DATABASE
    Node-2 is having DI, ERS & stand-by database software.
    I've check all the pre-requisites for sql upgrade.
    our kernel is on 700_Rel. I'm planning to stabilize the kernel with 721_Rel before Database upgrade.
    Support package patch level condition is met for sql upgrade in our scenario.
    Now we are planning to upgrade our MS SQL Server from 2005 sr3 to MS SQL Server 2008r2.
    Please provide me the steps for Kernel upgrade and sql upgrade to 2008r2 on Windows cluster environment.
    Thanks
    Venkat

    Hi Venkat
    1. Could you share your ECC support package level & also you can check the PAM
    2. Yes you can upgrade the MS Sql to 2008 R2, before starting upgrade Kindly ensure the full OS / DB level backup on both cluster node's
    3. MS Sql 2008 R2 upgrade refer the SAP Note
    1152240 - Setting Up Microsoft SQL Server 2008 (R2)
    4. For Kernel upgrade its release change kindly go thru the SAP Notes
    1713986 - Installation of kernel 721 (EXT)
    1728283 - SAP Kernel 721: General Information
    1726899 - 721 DCK: Upgrade from 7.0n to 7.1n
    BR
    SS

  • "Copy Selected Albums" Option Grayed Out for Synchronizing Photos--Help!!

    I purchased a 60GB Video iPod a week ago. I cannot get it to sync my photos. When I select "Synchronize photos from iPhoto," the option to "Copy all photos and albums" is selected and the option to "Copy Selected Albums" is grayed out. If I try to sync all the albums, I get an Error -50. I can, however, copy & sync photos by selecting my Pictures folder (either all folders or selected folders). But, that won't give me my photos organized by album in iPhoto.
    I rebuilt the iPhoto database and deleted/trashed preferences. No help. Any thoughts would be appreciated. Apple has been no help and I have searched and searched these forums over many days, with no success.

    I had this problem after I imported a bunch of photos. I narrowed it down and found that two of my pictures had the word "photo" in the filename, example(photo003.jpg and photo004.jpg). I deleted these files and the "copy selected ablums" was available again.
    Hope this helps!!

  • New Functionalities on SAP FI side in SAP ERP 6.0 EHP4 & SAP ERP 6.0 EHP5

    Hello Team
    I am a FI consulant and now i would like to know the functionalities avialable in SAP ERP 6.0 EHP4 and SAP ERP 6.0 EHP5. So i request you to pleasae check and provide me answers to the below points for my understanding
    1. What are the new functionalities added in SAP ERP 6.0 EHP4 on SAP FI side.
    2. What are the new functionalities added in SAP ERP 6.0 EHP5 on SAP FI side.Finally what is difference between EHP4 and EHP5, i mean in the point of SAP FI functioanliy.
    In the meantime, please provide me the links where i can get complete information on the new functionalities added on FI side in these Enhancement Packages (ie 4/5).
    Yours answers would help me a lot to understand the concept.
    Regards
    Sree

    Enhancements packages contains tens to hunderds of new or changed functionalites (called business functions). After installing an enhancement package you can activate the business functions which can be usefull to you.
    To have an idea which business function can be usefull, you can use the business function prediction. Based on the (FI) transactions you use in the system, it gives an advice which business functions in an enhancement package should be activated.
    See http://www.sap.com/solutions/business-suite/erp/enhancement_packages/business-function-prediction.epx
    and http://service.sap.com/erp-ehp

  • EHP4 for ERP6/NW 7.01 Support packages location

    Our SAP Component version is EHP4 FOR SAP ERP 6.0 / NW7.01.When I am trying to apply the support packages through SPAM(fron end ) i m getting an error no queue defined...?
    I have downloaded the support packages from this download location.
    - Support Packages and Patches - E" SAP ERP" SAP ERP ENHANCE PACKAGE" EHP4 FOR SAP ERP 6.0 / NW7.01" Entry by Component" SAP ECC Server VPack successor..
    can any one  help me by giving the correct download location..?
    Edited by: letzfriend on May 9, 2011 12:53 PM
    Edited by: letzfriend on May 9, 2011 1:05 PM

    Hi ,
    Seems that you have not defined the queue in SAP system. Please make sure that you have uncar all the components and put it under /usr/sap/trans/EPS/in directory.
    in SPAN load all the components via support packs-> load components from application server in 000 client and then define the queue in a order so that you can import SPs in system.
    Thanks..
    Mohit

  • Connection from Web Intelligence over Universe to SAP ERP without SAP BW

    Hi there,
    is there a way to create a Universe which ic connected to SAP ERP (ECC 6.0) ? I want to use Web-Intelligence to create the Reports for my ERP-Data. But i don't want to make the way over SAP BW.
    Otherwise i have to use Crystal because Crystal + SAP ERP Integration Kit can handle a connection to ERP. But then i have to waste a lot of time for the accuracy to a pixel which i dont need and i dont want...
    Any Ideas ?!
    Thanks
    Sebastian
    Edited by: smenzl on Mar 31, 2010 9:17 AM

    Hi
    you have 4 options:
    1) Load your SAP ERP data into an SAP BW system and use OLAP universes to build WebI reports.
    2) Use Rapid marts for SAP. This product comprises Data Integrator mappings that will allow to load your SAP ERP data into a predefined DWH based on a relational data source (like DB2, MS SQL Server or Oracle). It also includes a universe based on the predefined relational DWH that will allow you to build WebI reports.
    3) Use the Data Federator with the SAP R/3 connector. Please note that the R/3 connector is NOT a product rather a prototype tand will be used at own risk (SAP BusinessObjects Web Intelligence Reporting for SAP ERP [original link is broken])
    4) NOT RECOMMENDED: Try to access the tables directly in the underlying database. Please note that this may work for some but not all of the ERP data. In several case the data are stored encoded in the underlying tables and there is no way to extract the required information. Additionally the ERP security will not be leveraged into the WebI report.
    Crystal reports is the currently the only BO reporting tool, which supports direct access to SAP ERP data sources.
    Regards,
    Stratos

  • Configure ECC 6.0 EHP4 in SAP Solution Manager SP15

    Hi all,
    I just upgrade a system from R/3 4.6c to SAP ECC 6.0 EHP4 NW 7.01. I want to configure the system in SAP Solution Manager just upgraded to SP15. But I don't understand how I must to configure the system and to assign a logical component. It seems not to be the same possibilities between System configuration and Logical configuration.
    For system configuration I can choose product version EHP4 FOR SAP ERP 6.0 / NW7.01 and a full list of usage type
    For logical component I only found product SAP ERP ENHANCE PACKAGE and a very short list of version and usage type (??)
    Is someone know if it is normal or if it is necessary to patch solution manager ?
    Is ther a documentation existing to configure ERP EHP4 systems ??
    Thanks for your answer.
    Regards
    Gerard

    I have not seen any document to configure EHP4 systems specfically.
    I do not think, Solman SP15 should create any problem in that. But, since you are upgrading your landscape to EHP4, so why leave solman to SP15 instead of Ehp1 (SP18/19/20)...
    You might want to have a glance over some notes
    Note 1283307 - SMSY: Product version cannot be determined correctly
    Note 1301106 - SMSY: Enhancements and errors in Enhancement Package 1
    Note 1320545 - Updating the product version in SMSY

  • SAP ERP 5.0 Installation

    Dear all:
    can I use
    Windows 7   for server
    +
    SQL Server 2008  for database
    for installation of SAP ERP 5.0???
    what is the right platform for SAP ERP 5.0
    Please advise.

    Hi,
    First, do you mean SAP ERP 2005(SAP ECC 6.0) or SAP ERP 2004(SAP ECC 5.0)?
    Windows 7 cannot be used for either of the above as OS.
    For ERP 2005:
    Windows 2003/Windows 2008 with SQL Server 2005/2008 would be the option
    For ERP 2004:
    Windows 2000/Windows 2003 with SQL Server 2000/2005 would be the option
    Check http://service.sap.com/pam for more details.
    Regards,
    Srikishan

  • Integrating C4C with SAP ERP using HCI  ( SLD )

    Hi all,
    in order to link C4C with SAP ERP via HCI, Is it mandatory add the SAP ERP to a SLD ?
    thank u in advance.

    Hi Daniele
    Use the integration guide from SMP first - that is the final source.  The how-to guides can supplement but they aren't necessarily updated every quarter.   We have a new how-to guide for certificates as well - hopefully you found that one.   In 4.5 the cloud system they are referring to is HCI.   We also have a video for this - did you watch Prakash's elearning?   It's in our how-to guide blog - this might help.  
    So 1. get the integraiton guide, follow it
    2. Use Prakash's  video Integrating SAP Cloud for Customer with SAP ERP - YouTube
    3.  Use the certificate how-to guide
    -ginger

  • Master degree in SAP ERP

    Hello All,
         I am Bsc(Hons) Computing graduate. I have two years of experience in SAP ABAP. I wanted to take admission for Masters in SAP ERP systems. I wanted to get more skills by learning more modules like CRM, BI, HANA etc. Can anybody suggest which is the best university that provides this course ? I am interested in universities from USA, Canada, Germany specially because this countries offer work visa after studies and I wanted to gain international experience. So please suggest any university and If anybody have completed or pursuing this course currently please provide more information about this course.
    Thank you

    Please contact
    www.hs-furtwangen.de/bcm or
    [email protected]
    and look through Business Consulting Master with spezialsations in SAP (ERP, CRM, HANA, ABAP, BI, APO)
    Prof. Dr. Thomas Marx
    Programme Director MSc in Business Consulting
    Furtwangen University of Applied Sciences
    [email protected]
    www.hs-furtwangen.de/bcm

  • SAP ERP + any BO integration

    Dear sirs,
    I would love to start playing around with BO, but don´t know how. I would like to meet anybody, who has any experience in integrationg of any BO software (Crysral reports for example) with SAP ERP system. I would like to try myself such integration at home using the SAP and BO trials. Is that possible? Is there any who has done that before around here? Or maybe somebody would like to start with this thing as well and would like to work together? Any ideas appreciated.
    Regards Otto
    p.s.: I hope I will NOT find any more piece of advise like in BO forum where guys told me to review some techED content which is of course paid. I would like to get some help for free, if that is possible.

    Hi, Sure that's possible, sounds like a misunderstanding. There is heaps of information, this page is a great starting point
    https://wiki.sdn.sap.com/wiki/display/profile/Ingo+Hilgefort
    It gives a good overview of BOBJ / SAP integration (incl. CR on ECC) plus install guidance

  • Upgrade R/3 - ERP 6 - SP Stack 3 for EHP4 option comes and goes in MOPZ

    Hi,
    I'm currently preparing to upgrade our QA system from R/3 enterprise 4.7 ext set 2.00 directly to ERP 6 Ehp4 SP Stack 3.
    When i create the maintenance transaction, I can select the initial release R/3, and the QAS system.  The next step is to select whether i want to perform maintenance or upgrade.  i select Upgrade.
    I select find download files, here I'm given the option of selecting Product Version - EHP4 for ERP 6.0/NW7.01, or EHP3.  I select EHP4.
    The target stack is showing SAP ERP Enhancement Package 4 on NW 7.01 - SP Stack 1, or Stack Level 0.
    Where did sp stack 03 go?  I was able to select it for this system yesterday but I withdrew from the transaction as I wasn't ready to begin, and now when i go back in i can only select SP Stack 1!  The data for QAS is up to date in solution manager, and syncronized with the SAP Support Portal.
    My Solution Manager system is EHP1, or sp stack 19. I've also implemented all the suggested notes for sp 19 in Solution Manager.
    Thanks!
    Edited by: Tom Janes on Sep 10, 2009 2:33 AM
    UPDATE:  This morning I started a new maintenanace transaction and went through the above steps, and now I'm able to select SP3 for EHP4 as the target stack.  So I guess this isn't an issue anymore...
    Edited by: Tom Janes on Sep 10, 2009 2:53 PM

    Sorry, I don't know why this is showing up as one big sentence!!!!!
    Andre,
    I had lots of little issues using Prepare, especially with add-ons that were considered at too high a level for the upgrade (ST/PI, PI_BASIS, etc).  Most of these issues were resolved by using the latest SAPup.  Even during the upgrade there were times when the upgrade would stop unexpectedly, or hang.
    When I moved to the BS2007 DVD's, the whole process became much smoother.  In fact, during the upgrade the system did not stop due to any errors, or hang at any point.  The "Prepare" phase has been removed, and is now included in the overall upgarde process.  They have broken down the upgrade into 8 phases, and the system can stay in production until the 6th stage which is nice to minimize downtime.  We actually are looking at 15-20 hours of downtime total!  When I did the upgrade to ERP6 EHp3 then another to EHP4, the downtime was 4 or 5 days for us.
    The media list I used is as follows:
    51036767 - Kernel 7.01 (this one is os/db specific so might not be the right one for you)
    51036889 - Upgrade Master
    51036904_1 - Language 1
    51036904_2 - Language 2
    51036903_1 - Upgrade Export 1
    51036903_2 - Upgrade Export 2
    Also, using the solution manager, an upgrade Stack File was created, and the patches were added to the download basket and downloaded into the "Download Directory" for the upgrade.  I also added the latest kernel to this directory.  The upgrade program is pretty good when you put patch files in the download dir at finding the patchs.  I had all sorts of issues using the generated XML file from the Solution manager, but once the BCOS_CUST table was maintained and the RFC destination set up to the solution manager in the system I was upgrading, the upgrade progrma found the solman connection and took the stack directly from there.
    SAP has created a new upgrade master guide specifically for the BD2007 media, and going directly to EHp4.  Please see: https://websmp102.sap-ag.de/instguides .
    SAP Business Suite Applications - SAP ERP 6.0 - Upgrade - Upgrade Guides - ERP 6.0 includinge EHP 4
    One last note, if you start the upgrade with the ERP6 EHP3 media, and then decide to back out and use the BS2007 dvds, you might have issues.  I did this and then when i started to use BS2007, the upgrade program halted saying that another upgrade had already been started (this isn't supposed to happen but I'm not the first it has happened to!).  If I didn't have a backup of the DB to restore from, SAP would have had to log in and fix this issue which could have severely delayed us.
    Good luck with your Upgrade!
    Tom
    Edited by: Tom Janes on Oct 6, 2009 7:48 PM

Maybe you are looking for