Select-option filed

Hi ,
If my slect option field have 10 values, if i want to fetch a particualr value....can i fetch that at the run time....because tempervary table of seelct otpion will contain onoy low and high values..then how can we get teh particalua value from there....thanks,
Ram.

Hello Ram,
I created one sample program on this scenario and it is working fine.
here i tried to delete few records of select-option.
check this.
REPORT zssrtest .
TABLES: mara.
SELECT-OPTIONS: s_matnr FOR mara-matnr.
s_matnr-sign = 'I'.
s_matnr-option = 'EQ'.
s_matnr-low = '000000000000000001'.
APPEND s_matnr.
s_matnr-low = '000000000000000002'.
APPEND s_matnr.
s_matnr-low = '000000000000000003'.
APPEND s_matnr.
s_matnr-low = '000000000000000004'.
APPEND s_matnr.
s_matnr-low = '000000000000000005'.
APPEND s_matnr.
s_matnr-low = '000000000000000006'.
APPEND s_matnr.
s_matnr-low = '000000000000000007'.
APPEND s_matnr.
LOOP AT s_matnr WHERE low NE '000000000000000007'.
DELETE s_matnr.
ENDLOOP.
LOOP AT s_matnr." WHERE low NE '000000000000000007'.
WRITE: / s_matnr.
ENDLOOP.
Regards
Sasidhar Reddy Matli.

Similar Messages

How to pass select-option filed to Function Module Exporting Parameter

Hi,
    How to pass select-option filed to Function Module Exporting Parameter.
Thanks

Hi,
DATA: BEGIN OF ITAB5_WRK OCCURS 0,
        KUNNR     TYPE KNKK-KUNNR, "CUSTOMER #
        SBGRP     TYPE KNKK-SBGRP, "CREDIT REP
        KLIMK     TYPE KNKK-KLIMK, "CREDIT LIMIT
        NAME1     TYPE KNA1-NAME1, "CUSTOMER NAME
        SKFOR     TYPE KNKK-SKFOR, "TOTAL A/R
        AMT1      TYPE KNKK-SKFOR, "CURRENT
        AMT2      TYPE KNKK-SKFOR,                          "01-30
        AMT3      TYPE KNKK-SKFOR,                          "31-60
        AMT4      TYPE KNKK-SKFOR,                          "61-90
        AMT5      TYPE KNKK-SKFOR,                          "91-120
        AMT6      TYPE KNKK-SKFOR,                          "OVR 120
        BZIRK     TYPE KNVV-BZIRK,
      END OF ITAB5_WRK.
SELECT-OPTIONS P_COMP     FOR T001-BUKRS
SELECT KUNNR SBGRP FROM KNKK
         INTO TABLE ITAB5_WRK
         WHERE SBGRP IN P_REP
           AND KUNNR GE '0001000000'
           AND SKFOR NE 0.
LOOP AT ITAB5_WRK.
    DELETE ADJACENT DUPLICATES FROM ITAB5_WRK COMPARING KUNNR.
ENDLOOP.
PERFORM GET_CREDIT_LIMITS.
*=======================================================================
IF P_DIST NE SPACE.
    LOOP AT ITAB5_WRK.
      SELECT SINGLE * FROM KNVV WHERE KUNNR EQ ITAB5_WRK-KUNNR
                                  AND VKORG EQ P_COMP
                                  AND VTWEG EQ '20'
                                  AND SPART EQ '10'
                                  AND BZIRK IN P_DIST.
      IF SY-SUBRC EQ 0.
        MOVE KNVV-BZIRK TO ITAB5_WRK-BZIRK.
        MODIFY ITAB5_WRK.
      ELSE.
        DELETE ITAB5_WRK.
      ENDIF.
    ENDLOOP.
ENDIF.
*==============================================================
LOOP AT ITAB5_WRK.
    MOVE: 'F/S'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    PERFORM AGING.
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MOVE: 'SPEC'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    *PERFORM AGING.*
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MODIFY ITAB5_WRK.
ENDLOOP.
FORM AGING.
*CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'*
EXPORTING
      BUKRS             = P_COMP
      KKBER             = WRK-KKBER
      KUNNR             = WRK-KUNNR
      RASID             = 'FEND'
      KLIMP             = 'X'
    IMPORTING
      SFAE1             = W_SFAE1
      SFAE2             = W_SFAE2
      SFAE3             = W_SFAE3
      SFAE4             = W_SFAE4
      SFAE5             = W_SFAE5
      SFAE6             = W_SFAE6
      SFAEL             = W_SFAEL
      SNFA1             = W_SNFA1
      SNFA2             = W_SNFA2
      SNFA3             = W_SNFA3
      SNFA4             = W_SNFA4
      SNFA5             = W_SNFA5
      SNFA6             = W_SNFA6
      SNFAE             = W_SNFAE
    EXCEPTIONS
      NO-AGING_SCHEDULE = 1
      NO_TABLE_INPUT    = 2.
CASE SY-SUBRC.
    WHEN 1.
      MESSAGE E999 WITH 'PLEASE ENTER AGING SCHEDULE'.
    WHEN 2.
      MESSAGE E999 WITH 'DO NOTHING ??'.
ENDCASE.
ENDFORM.                    "AGING
Thanks

One search help for multiple select-options in webdynpro abap

Hi,
I need a way to use one search help for multiple select-options fields. My scenario is :
I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
I think I won't be able to use this way. What do you say?
As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
MY TABLE (ZBYYT080) CONTENTS:
SID     VARBL     VALUE     LANGU     VTEXT
ADS     $WERKS     1     T     Werk 0001
ADS     $WERKS     11     T     OZYAS GIDA URETIM YERI
ADS     $WERKS     5501     T     BOYA GEBZE FABRİKASI
ADS     $WERKS     5502     T     BOYA CIGLI FABRİKASI
AGT     $WERKS     2301     T     KAMLI DAMIZLIK
AGT     $WERKS     9601     T     PANAR DENIZ URETIM YERI
ADS     $VKORG     22     T     AA KİMYASALLAR
ADS     $VKORG     8001     T     İINSAAT BOYALARI
AGT     $VKORG     6500     T     DAMk St.Org
AGT     $VKORG     5400     T     PANAR St.Org.
I wish I'm clear enough..
I will be gald if someone answers me as soon as possible...
Thanks İn advance..
MERAL

Hi,
Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
Am I right ?
If Yes, then in the interface IF_WD_SELECT_OPTIONS
method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
have importing param like I_VALUE_HELP_TYPE and I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
etc which may help you to link your create DDIC Search help to selection screen params.
this is just a clue from my side. I haven't tried it myself.
You can go to the where used list of this method and find some sample implementations which use these params.
Hope this helps.
Regards
Manas Dua

Select-options in Dialog Programming

Hi,
I am designing a custom dialog programming screen.
I want to create a filed on thescreen which can allow the range of values to be entered like select-options in a report.
How do I create a field which can accept range of values in dialog programming?
Thanks,
Ashok.

Hi,
In your selection screen program, Use Export command
Export r_Purchase_Order To Memory Id 'PO'.
             Export r_Po_Item        To Memory Id 'POITEM'.
             Export r_Plant          To Memory Id 'PLANT'.
             Export r_Vendor         To Memory Id 'VENDOR'.
             Export r_Material       To Memory Id 'MATNR'.
             Export r_Batch          To Memory Id 'BATCH'.
             Export r_Arrival_Date   To Memory Id 'ADATE'.
             Export r_Arrival_Time   To Memory Id 'ATIME'.
             Export r_Delivery_No    To Memory Id 'DEL'.
             Export r_Reference_No   To Memory Id 'REF'.
             Export r_User           To Memory Id 'USER'.
             Export t_Display_Data   To Memory Id 'DISPDAT'.
In your Module pool program, Use Import Command
    When c_Ok_0100_Execute.
               IMPORT r_Purchase_Order From Memory Id 'PO'.
               IMPORT r_Po_Item        From Memory Id 'POITEM'.
               Import r_Plant          From Memory Id 'PLANT'.
               Import r_Vendor         From Memory Id 'VENDOR'.
               Import r_Material       From Memory Id 'MATNR'.
               Import r_Batch          From Memory Id 'BATCH'.
               Import r_Arrival_Date   From Memory Id 'ADATE'.
               Import r_Arrival_Time   From Memory Id 'ATIME'.
               Import r_Delivery_No    From Memory Id 'DEL'.
               Import r_Reference_No   From Memory Id 'REF'.
               Import r_User           From Memory Id 'USER'.
               Import t_Display_Data   From Memory Id 'DISPDAT'.
Thanks

How to hide the select-options fields on radiobutton select in webdynpro

hi
Could you please help how to hide the select-option fields in webdynpro
there are four radio buttons
for every radiobutton there is corresponding the select_option filed is associated to it
user as only provision select one radio button and reset of the select-option fileds should be hidden
which ever the radio button is selected corresponding the select-options fileld should be displayed
please find the attachement below

Hi Nine,
To hide select options you should use interface method REMOVE_SELECTION_SCREEN_ITEM of IF_WD_SELECT_OPTIONS.
Sample code :
Write the below code in the Event handler of Radio Button.
DATA lv_r_helper_class TYPE REF TO if_wd_select_options.
lv_r_helper_class = lo_interfacecontroller->init_selection_screen(
lv_r_helper_Class->REMOVE_SELECTION_SCREEN_ITEM(exporting i_id = 'Select_option1_id1').
This will hide first select option of your screen.Similarly pass select_option_id2 to hide it and so on.
Regards,
Ravikiran.k

Query regarding OBLIGATORY option in SELECT-OPTIONS

Hi,
The requirement is to have a select-option for any date field(i've used bkpf-budat) and set its HIGH value to SY-DATUM i.e. current system date. The select-option field MUST BE "OBLIGATORY".
On Executing, the current date should be display on the HIGH filed of select-options. Now, what i need here is that the program should execute normally even if the LOW field of select-options field is left BLANK.
The code is as follows.
TABLES: bkpf.
SELECT-OPTIONS: s_budat FOR bkpf-budat OBLIGATORY.
AT SELECTION-SCREEN OUTPUT.
    s_budat-low    = space.
    s_budat-high   = sy-datum.
    s_budat-sign   = 'I'.
    s_budat-option = 'BT'.
    APPEND s_budat.
Do suggest the methodlogy to achieve this requirement.
Thanks & Regards,
Rajesh

Hi rajesh,
1. directly its not possible.
we have to use some extra logic.
2. first of all remove OBLIGATORY.
3. THEN USE LIKE THIS.
REPORT abc.
TABLES: bkpf.
SELECT-OPTIONS: s_budat FOR bkpf-budat .
AT SELECTION-SCREEN OUTPUT.
s_budat-low = space.
s_budat-high = sy-datum.
s_budat-sign = 'I'.
s_budat-option = 'BT'.
APPEND s_budat.
<b>START-OF-SELECTION.
IF s_budat-high IS INITIAL.
    MESSAGE s999(yhr) WITH 'Date should not be blank'.
    LEAVE LIST-PROCESSING.
ENDIF.</b>
regards,
amit m.

Making input select option or input field mandatory....

Hello Gurus,
I have been through some material to create select options in web dynpro ABAP. Now I want to make one of the fields mandatory so that if user executes it without filling data in that filed, it gives error message or enforces user to input in the manadtory field.
I know how to do this in ABAP but how do I achieve the same in ABAP webdynpro ?
Please help.
Regards,
Jainam.

Hi ,
Set i_obligatory parameter as X. This will set the select options as mandatory and standard error message will popup in case it is not filled.
wd_this->m_handler->add_selection_field(
i_id = 'S_CARR_ID'
it_result = lt_range_table
* i_obligatory = 'X' , " To make it mandatory

Parameter or select-option

hello all,
i have requierment in which i am confused.I have to declare a field in selection screen for user input. I have declared the field as parameter.But there is no multiple select option. And user ant to have multiple select option(.i.e interval range).
The problem is the field i have declared in parameter is type c.Like:: Enterprise(30) type c,
              divivsion(30) type c.
So this is not having any interval range.If i use select-option i can provide the range. SO plz help how can i define the parameter in select-option if its possible.
Most important thing is is there is no filed for refrence like: s_matnr for mara-matnr. as we can define in select-option.
Plz suggest some thing on this.
Thanks & Regards,
Anu Maheshwari

Hi Anu,
Decalare it as
1)If you want your SELECT -OPTIONS to behave like parameters. USe the option.
<b>SELECT-OPTIONS ..... NO INTERVALS NO-EXTENSION</b>
REPORT abc.
DATA : v_enterpr(30) TYPE c,
v_divin(30) TYPE c.
SELECT-OPTIONS : s_enterp FOR v_enterpr NO INTERVALS NO-EXTENSION ,
                 s_divin FOR v_divin NO INTERVALS NO-EXTENSION .
2)If you want to have it as SELECT-OPTIONS.
Then
REPORT abc.
DATA : v_enterpr(30) TYPE c,
v_divin(30) TYPE c.
SELECT-OPTIONS : s_enterp FOR v_enterpr ,
                 s_divin FOR v_divin .
Refer to the program I gave in this link for more details.
Re: Difference of "NO INTERVALS NO-EXTENSION" and "Parameter"
Regards,
Arun Sambargi.

Making to-field in select-option mandatory

hi experts
I defined an OBLIGATORY select-option with no-extension option. but the user wants not only the "from" field is OBLIGATORY but also the "to" filed.
I know I can do it if I define 2 parameters in the same line. but is there any other option if using select-option
many thanks
Edited by: Thomas Zloch on Nov 4, 2010 9:54 AM - subject changed

Use the FM [SELECT_OPTIONS_RESTRICT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=select_options_restrict#sdn_content_category_value_wiki] in the initialization of the report, and only allow "I/BT" records types.
FORM restrict_select.
* Local data
DATA: restrict TYPE sscr_restrict,
        opt_list TYPE sscr_opt_list,
        *** TYPE sscr_***.
* Create Options
* - Option ALL : any selection allowed
CLEAR opt_list.
MOVE 'ALL' TO opt_list-name.
MOVE 'X' TO: opt_list-options-bt,
               opt_list-options-cp,
               opt_list-options-eq,
               opt_list-options-ge,
               opt_list-options-gt,
               opt_list-options-le,
               opt_list-options-lt,
               opt_list-options-nb,
               opt_list-options-ne,
               opt_list-options-np.
APPEND opt_list TO restrict-opt_list_tab.
* - Option RNG only ranges of values
CLEAR opt_list.
MOVE 'RNG' TO opt_list-name.
MOVE 'X' TO: opt_list-options-bt.
APPEND opt_list TO restrict-opt_list_tab.
* Affect Options to actual select-options
* - ALL by default
CLEAR ***.
MOVE: 'A'          TO ***-kind,
        '*'          TO ***-sg_main,
        'ALL'        TO ***-op_main.
APPEND *** TO restrict-***_tab.
* RNG to a single select-option
CLEAR ***.
MOVE: 'S'          TO ***-kind,
        'SO_FIELD'   TO ***-name,
        'I'          TO ***-sg_main,
        'RNG'        TO ***-op_main.
APPEND *** TO restrict-***_tab.
* Execute
CALL FUNCTION 'SELECT_OPTIONS_RESTRICT'
       EXPORTING
            restriction = restrict
       EXCEPTIONS
            OTHERS      = 0.
ENDFORM.                    " restrict_select
Regards,
Raymond

Select-option field leveln validation

Hi folks.
can you please tell me how to do a select-option field leveln validation, i know how to do incase the filed is defined as parameter. here my field is defined as select-option.
SELECT-OPTIONS: C_CTLPC FOR KNKK-CTLPC.
here i need to check for both low, high intervals?
please help me, thanks in advance.
regards
priya

Hi again,
1. so i need to validate that filed should contatin '01' not '1'
U can validate like this.
2. Data : myval like knkk-ctlpc.
   myval = '01'.
   if myval in c_ctlpc.
    else.
   *----- code for error message
endif.
regards,
amit m.

Report help for multiple Date Select options

Hi Friends,
For a particular year wise report, the client wants 12 date select-options which are changeable and informal every year .The report will also be displayed as per the given date selection period wise. Please help me how to fetch the datas from the table as per the given selection period. Currently the report have one date select-option where the user gives selection range as 1.04 to 31.03. It's related to EB power consumption report and hence the new requirement on date selection which are informal and not a fixed date of every year.
Ex:Selection-Screen
Period 1 : 08.04.2008 to 12.05.2008
Period 2: 12.05.2008 to 20.06.2008
Period 3: 21.06.2008 to 28.07.2008
Period 4: 29.07.2008 to 15.08.2008
Period 5: 15.08.2008 to 21.09.2008
Period 6 : 21.09.2008 to 14.10.2008
The data will derive as per the above selection ranges.......
Please advise with example.
thanks & regards
Sankar.

>
sankar babu wrote:
> Ex:Selection-Screen
> Period 1 : 08.04.2008 to 12.05.2008
> Period 2: 12.05.2008 to 20.06.2008
> Period 3: 21.06.2008 to 28.07.2008
> Period 4: 29.07.2008 to 15.08.2008
> Period 5: 15.08.2008 to 21.09.2008
> Period 6 : 21.09.2008 to 14.10.2008
Hi,
In this case just derive all records matching dates between 08.04.2008 (low in first select-options) and 14.10.2008(high in last select-options.
Also my advice is to use a single select-options and prompt the user to give the dates as ranges in the multiple entries dialog which can be opened by clicking the button on the right side of the select-options.
Regards
Karthik D

How To... Change the Data Type for a SELECT-OPTIONS at run time.

Hello,
I am trying to restrict the values available for entry into a SELECT-OPTIONS at run time depending on user input.
The logic is as follows. The user has two input fields. A PARAMETER field which has the type RSDIOBJNM and allows them to choose an InfoObject. And the user has a SELECT-OPTIONS field to allow them to select the Characteristic values for that InfoObject.
I would like the following example to be possible:
The user enters 0MATERIAL into the PARAMETER. When the user clicks on the SELECT-OPTIONS control code will derive a list of possible options the user can enter in the SELECT-OPTIONS. In this case only values found in the master data or at least no values greater than 18 characters.
I have looked at the following function module SELECT_OPTIONS_RESTRICT and this do not appear to be helpful as they only restrict on the signs allowed for the values (unless I misunderstand, it is a complex function module!).
The code I have so far is (thus the user enters a InfoObject into p_char1 and the select options so_char1 should only accept active values of that InfoObject):
declaration of variables for user interface
DATA c_char(32) TYPE c.
declaration of count variable
DATA i_count TYPE i.
declaration of user interface
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
    PARAMETERS: p_ipack TYPE RSLOGDPID.
SELECTION-SCREEN END OF BLOCK a1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
    PARAMETERS: p_char1 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char1 for c_char NO INTERVALS.
    PARAMETERS: p_char2 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char2 for c_char NO INTERVALS.
    PARAMETERS: p_char3 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char3 for c_char NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b1.
Is what I am trying to do possible???
Thanks for any help. Ross.

You really want to restrict possible values of a select-option based on another field, not change the length of type of the select-option field, right?
Here is what you do: Code a custom F4 value help for the select-option at event AT SELECTION-SCREEN ON VALUE REQUEST FOR.. The first thing you do here is read the value of the parameter field (p_ipack in your example). You can use function module DYNP_VALUES_READ. Based on this value, you can propose values for the select-option fields. Note that the use can still enter whatever s(he) wishes in to the select-option field without pressing F4. In this case, you will have to code some input validations taking into account the value in the p_ipack field.

Select-options in SELECT query - syntax error

Hi all,
I get the error below when I try to use the select options in a SELECT query . Please help me.
"The IN operator with "SO_AWART" is followed neither by an internal
table nor by a value list."
The code i have used(Logical database PNP is used):
TABLES: pernr,
        catsdb.
INCLUDE ztime_cwtr_top.    " global Data
INCLUDE ztime_cwtr_f01.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS SO_AWART FOR CATSDB-AWART.
PARAMETERS P_THRES TYPE I.
SELECTION-SCREEN END OF BLOCK B1.
Get data from CATSDB table. Workdates within the date interval are considered.
SELECT pernr workdate awart catsquantity beguz enduz status
FROM catsdb
INTO TABLE it_catsdb
WHERE pernr = pernr-pernr    AND
       workdate GE pn-begda     AND
       workdate LE pn-endda     AND
       status   IN ('20', '30') AND
       awart    IN so_awart .
      awart    IN ('1100', '1137', '1138', '1139', '1140',
                  '1147', '1148', '1149', '1157', '2003' ).
when I give the values directly i do not get any syntax error, but when I use select options in the where condition I get the syntax error.
I have tried different options like using only the select-options in the where condition.
Thanks in advance.....
Madhu

Solved.
Code with syntax error:
include z...top .
include z...fo1.
select-options: xxxxxxx
Code with no syntax error:
select-options: xxxxxxx
include z...top .
include z...fo1.
Thanks for all your help,
Madhu

How to hide some select-option of Logical Database in report?

How to hide select-option of Logical Database in report?eg . In Logical Database 'PNP' , my code is 'GET PERNR' , excute the report , select-screen is displayed . I want to hide some select-options , such as PNPPERNR-LOW .
Edited by: rongrong wang on Mar 26, 2008 9:31 AM

U need to write code in initialization as
initialization.
loop at screen.
if screen-name = 'PNPPERNR-LOW'.
screen-active = '0'.
modify screen.
endif.
if screen-name = 'PNPPERNR-HIGH'.
screen-active = '0'.
modify screen.
endif.
endloop.

Re : select-options in abap-objects program

Dear friends,
                  I want to give select-options in abap-objects program. How to give that.
                             Thanking You
with regards,
Mani

In the transaction SE24, enter your class name, click modify.
in the tab named "Types" you have to declare two types. By example, if you want to receive one select-options that in your program that uses this class is declared like:
" P_SAKNR FOR SKAT-SAKNR".
you've got to declare two types in the class:
a- TYPES: begin of E_S_SAKNR,
                      sign(1),
                      option(2),
                      low(10),
                      high(10),
                  end of E_S_SAKNR.
b - TYPES E_T_SAKNR type standard table of E_S_SAKNR.
so, in the class method that you want to receive P_SAKNR as importing parameter. You got to do this:
method TEST importing ET_SAKNR type E_T_SAKNR.
now, in the implementation of this method you should be able to use ET_SAKNR as the same way as you usually use a parameter or a select-option. You could use it in a select with the operator IN by example..

Select-option filed

Similar Messages

Maybe you are looking for