Select option for selection valid and invalid data.

Hi All,
Any one pleas help in validating following case :-
In the selection screen there is a select option for equipment number like EQUI-EQUNR
if any user will give wrong equipment no. It will generate an error message from the range of equipment no.
and put it to an internal table it error.
and if any value in between the select option(equipment no) is correct then that value I need to proceed for some other logic.
Iu2019d appreciate if some one help me in generation code for the above case or logic.
Thanks

Hi,
Use FM 'RS_REFRESH_FROM_SELECTOPTIONS'
DATA: RSPAR TYPE STANDARD TABLE OF RSPARAMS.
      REFRESH RSPAR.
      CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
          EXPORTING
            CURR_REPORT           = 'prog name'
    IMPORTING
      SP                    =
          TABLES
            SELECTION_TABLE       = RSPAR
         EXCEPTIONS
           NOT_FOUND             = 1
           NO_REPORT             = 2
           OTHERS                = 3.
      IF SY-SUBRC <> 0.
   MESSAGE I000.
      ENDIF.
In table parameter you ll get the all entries entered .
Check out the values with respective tables.If value is not correct tk it into internal table
else proceed ahead. You can Remove incorrect entries this way.
regards,
ajit.

Similar Messages

Select Options for my program and i need to get the code from coding wizard

Hi Experts,
i am new to Webdynpro programming.
i want to use Select-options in my component. and also please tell me how to use coding wizard,
Please let me know if you need any information.
Thanks in advance
Lava.

Hi Lava,
To create select options we have to use the existing component WDR_SELECT_OPTIONS.
For using this component in our WebDynpro component we need to specify this in used components tab in our WebDynpro component.
check the standard components WDR_TEST_SELECT_OPTIONS .
Also refer the following links.
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60811d03-b69e-2b10-cd86-ad2790e44ecc]
Saptechnical->tutorials->webdynproabap->select options
Regards,
Radhika .

Alternative for "check select-options" for select query.

hi all,
my report is using a "GET" syntax, followed by "check select-options".
My senior told me to replace the Get syntax with select query.
Now, my program also has dynamic selection screen.
the dynamic selection screen almost has all the fields of database table.
so, what is the way to replace this check select-options while applying select query?
can you tell me how dynamic selection screen fields are populated? are they stored in some internal table?
thanks for help.

HI
Here is some points about LDB.
Logical databases are special ABAP programs that retrieve data and make it available to application programs. The most common use of logical databases is still to read data from database tables by linking them to executable ABAP programs.
However, from Release 4.5A, it has also been possible to call logical databases using the function module LDB_PROCESS. This allows you to call several logical databases from any ABAP program, nested in any way. It is also possible to call a logical database more than once in a program, if it has been programmed to allow this. This is particularly useful for programs with type 1.
Logical databases contain Open SQL statements that read data from the database. You do not therefore need to use SQL in your own programs. The logical database reads the program, stores them in the program if necessary, and then passes them line by line to the application program or the function module LDB_PROCESS using an interface work area
For further on LDB's refer to this link.
[http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm]
Hope this will help.
Reward if helpful.
Sumit Agarwal

Missing select-options for kna1-kunnr

Hi,
Has anybody ever come across this before ?
I've modified a program to add a new select options for kna1-kunnr and added a bit of code that processes the value entered.
In "development" it all tested OK and the program was transported up to "test".
In "test" the users tested and everything was OK.
The program was eventually transported up to "production" but when I run it in production the select-options for kna1-kunnr does not appear on the selection screen ? However, the when I run the program the additional bit of code that I also included does actually execute.
I haven't been able to look at the code yet because SE38 and SE80 are disabled in "production".
It sounds to me that the selection screen has somehow not generated correctly when the program was transported into production but the transport logs didn't display any errors or warnings. I have also had the program retransported into production but I still can't see the select-options.
There are no variants for the program and I'm not getting any security issues on the SU53.
Any help would be gratefully received.
Thanks
Stan

Hi,
You can try system->staus->program name. Double click on program name and see if you enter abap editor. You can check your code there.
Or else just create another transport in development and send to production
Thanks,

Validation of Select Options for a field

Hi All,
I need to write a validation logic for a select option for VTWEG (Distribution Channel).
select-options: s_vtweg for komg-vtweg.
I need to check whether the user has entered the correct value based on the search help. The check table of this particular field is TVTW.
Following is the code i wrote under the AT SELECTION-SCREEN block:
IF NOT S_VTWEG-LOW IS INITIAL.
SELECT SINGLE VTWEG INTO KOMG-VTWEG FROM TVTW
                                 WHERE VTWEG IN S_VTWEG.
IF SY-SUBRC NE 0.
CONCATENATE ' Please enter the correct
                                Distribution Channel '
Z_MSG INTO Z_MSG.
SET CURSOR FIELD 'S_VTWEG-LOW'.
MESSAGE E000 WITH Z_MSG.
ENDIF.
ENDIF.
It works fine when the user enters a wrong value in the S_VTWEG-LOW field, where as if i gives more than one wrong value in the range or giving individual values its not working. Let me know how to do the validation check for multiple values entered individually or in ranges.
Could you please suggest how to resolve this problem.
Thank You,
Suresh

You could do something like this.....here looping at the select-option table and check the values for low and high.
report zrich_0003.
tables: komg.
data: z_msg(100) type c.
select-options: s_vtweg for komg-vtweg.
at selection-screen.
loop at s_vtweg.
    if not s_vtweg-low is initial.
      select single vtweg into komg-vtweg from tvtw
             where vtweg = s_vtweg-low.
      if sy-subrc ne 0.
        concatenate ' Please enter the correct
        distribution channel '
                  z_msg into z_msg.
        set cursor field 'S_VTWEG-LOW'.
        message e001(00) with z_msg.
      endif.
    endif.
    if not s_vtweg-high is initial.
      select single vtweg into komg-vtweg from tvtw
             where vtweg = s_vtweg-high.
      if sy-subrc ne 0.
        concatenate ' Please enter the correct
        distribution channel '
                  z_msg into z_msg.
        set cursor field 'S_VTWEG-HIGH'.
        message e001(00) with z_msg.
      endif.
    endif.
endloop.
Regards,
Rich Heilman

Select-options for date field.

Hi all,
i need to give select options for Date field.How can i give that.
Thanks & Regards
Ravi.

Hi Ravi,
Use the Component WDR_SELECT_OPTIONS to include select options in Web Dynpro ABAP. Follow these steps:
1. In your Component , "Used Componet" tab add Component WDR_SELECT_OPTIONS . Component Use can be any name that you want to give, eg SELECT_OPTIONS
2. Go to the View where you want to include the Date Select Options. I am assuming that you already have an Attribute of Type DATS in your context.
3. View: Properties Tab:Create Controller Usage and select
SELECT_OPTIONS     WDR_SELECT_OPTIONS
SELECT_OPTIONS     WDR_SELECT_OPTIONS     INTERFACECONTROLLER
4. View Layout Tab:Include a View Container. In this view container we will show the Date Select Options.
5. View Attributes Tab: Create Following two attributes:
M_HANDLER type IF_WD_SELECT_OPTIONS
M_WD_SELECT_OPTIONS type IWCI_WDR_SELECT_OPTIONS
6: View Methods Tab: Create a method eg CREATE_SELECTION_SCREEN. Call this method in the WDDOINIT of the view.
7:CREATE_SELECTION_SCREEN: Write following Code:
* Data Declaration
data:
        lt_range_table TYPE REF TO DATA.
data:
        lr_componentcontroller TYPE REF TO IG_COMPONENTCONTROLLER,
        lr_componentusage TYPE REF TO IF_WD_COMPONENT_USAGE.
* Execution
* Create Used Component
lr_componentusage = wd_this->wd_cpuse_select_options( ).
if LR_COMPONENTUSAGE->HAS_ACTIVE_COMPONENT( ) is initial.
    lr_componentusage->create_component( ).
endif.
* Get pointer to interface controller of select options
wd_this->M_WD_SELECT_OPTIONS = wd_this->wd_cpifc_select_options( ).
* initialize selction screen
wd_this->M_HANDLER = wd_this->M_WD_SELECT_OPTIONS->init_selection_screen( ).
* Create Range Table for: Date
CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
    EXPORTING
      I_TYPENAME     = 'DATS'
    RECEIVING
      RT_RANGE_TABLE = lt_range_table.
* Add Selection Field for: Date
CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
    EXPORTING
      I_ID                         = '<name of date attribute in the context>'
*      I_WITHIN_BLOCK               = MC_ID_MAIN_BLOCK
*      I_DESCRIPTION                =
*      I_IS_AUTO_DESCRIPTION        = ABAP_TRUE
      IT_RESULT                    = lt_range_table
*      I_OBLIGATORY                 = ABAP_FALSE
*      I_COMPLEX_RESTRICTIONS       =
*      I_USE_COMPLEX_RESTRICTION    = ABAP_FALSE
*      I_NO_COMPLEX_RESTRICTIONS    = ABAP_FALSE
*      I_VALUE_HELP_TYPE            = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_NONE
*      I_VALUE_HELP_ID              =
*      I_VALUE_HELP_MODE            =
*      I_VALUE_HELP_STRUCTURE       =
*      I_VALUE_HELP_STRUCTURE_FIELD =
*      I_HELP_REQUEST_HANDLER       =
*      I_LOWER_CASE                 =
*      I_MEMORY_ID                  =
*      I_NO_EXTENSION               = ABAP_FALSE
*      I_NO_INTERVALS               = ABAP_FALSE
*      I_AS_CHECKBOX                = ABAP_FALSE
*      I_AS_DROPDOWN                = ABAP_FALSE
*      IT_VALUE_SET                 =
*      I_READ_ONLY                  = ABAP_FALSE
*      I_DONT_CARE_VALUE            =
*      I_EXPLANATION                =
      I_TOOLTIP                    = 'Select Date'.
8: To Fetch Data entered in the selection field, write following code on action of button click:
data:
        lt_date type REF TO DATA.
FIELD-SYMBOLS:
                 <fs_date> TYPE table.
* retrieve Date from Select Options
CALL METHOD WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD
    EXPORTING
      I_ID           = '<attrib_name>'
    RECEIVING
      RT_RANGE_TABLE = lt_date.
* assign Date Field Symbol
ASSIGN lt_date->* to <fs_date>.
9: Windows Window Tab: In the View Conatiner, embed the WND_SELECTION_SCREEN view from SELECT_OPTIONS component Usage of WDR_SELECT_OPTIONS component.
Regards,
Reema.

Select option for date

i want give default values in select option for date (for a period)
I used
SELECT-OPTIONS y_s_mnth FOR y_v_dt_month default first to last OPTION BT.
first and last are dates.
I am getting error dialog box....specify ranges...
Please give sample code..

Hi Suhas,
I hope this code will help you. Reward me if it is helpful.
select-options : y_s_mnth FOR sy-datum.
initialization.
y_s_mnth-sign   = 'I'.
y_s_mnth-option = 'BT'.
y_s_mnth-low    = sy-datum - 30.    "first_day
y_s_mnth-high   = sy-datum.         "last_day
append y_s_mnth.
clear y_s_mnth.
Regards,
Sagar

Select-options in Selection Screen to show more rows for entering values

Hi all,
In my webdynpro abap I have added the SELECT-OPTIONS componenet and working fine.
User need in the Selection Screen for select options more rows to show entering values in single time.
THe Default Rows show only 5 .
user need to change to 10 or 15 Rows to show.
Pl help .
THanks in advance.
Dev

Hi,
Here is the way which I just tested and found working.
This is the main code which needs to be written.
TYPES:
    ty_r_vbeln TYPE RANGE OF vbeln,
    ty_s_vbeln TYPE LINE OF ty_r_vbeln.
data ls_vbeln type ty_s_vbeln.
field-symbols <fs_range> TYPE INDEX TABLE.
ASSIGN lt_range->* TO <fs_range>.
do 10 times.
APPEND ls_vbeln TO <fs_range>.
enddo.
For further refinement, you can create a input field in view for number of lines to be shown as enabled.
The complete code is as below.
DATA lo_cmp_usage TYPE REF TO if_wd_component_usage.
lo_cmp_usage =   wd_this->wd_cpuse_select_options( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
lo_cmp_usage->create_component( ).
ENDIF.
DATA lo_interfacecontroller TYPE REF TO iwci_wdr_select_options .
lo_interfacecontroller =   wd_this->wd_cpifc_select_options( ).
DATA lo_r_helper_class TYPE REF TO if_wd_select_options.
lo_r_helper_class = lo_interfacecontroller->init_selection_screen( ).
Creating range table
DATA lt_range TYPE REF TO data.
CALL METHOD lo_r_helper_class->create_range_table
    EXPORTING
      i_typename     = 'VBELN'
    RECEIVING
      rt_range_table = lt_range.
Disabling the global options
CALL METHOD lo_r_helper_class->set_global_options
EXPORTING
      i_display_btn_cancel = abap_false
      i_display_btn_check   = abap_false
      i_display_btn_reset   = abap_false
      i_display_btn_execute = abap_true.
       TYPES:
    ty_r_vbeln TYPE RANGE OF vbeln,
    ty_s_vbeln TYPE LINE OF ty_r_vbeln.
data ls_vbeln type ty_s_vbeln.
field-symbols <fs_range> TYPE INDEX TABLE.
ASSIGN lt_range->* TO <fs_range>.
do 10 times.
APPEND ls_vbeln TO <fs_range>.
enddo.
Adding the selection field
CALL METHOD lo_r_helper_class->add_selection_field
    EXPORTING
      i_id                         = 'VBELN'
      I_OBLIGATORY                 = ABAP_TRUE
      I_NO_EXTENSION               = abap_false
      i_value_help_type = if_wd_value_help_handler=>CO_PREFIX_SEARCHHELP
      it_result                    = lt_range.
Edited by: Jayanthi Jayaraman on Dec 2, 2010 8:29 AM

Requirement to maintain select-options for multiple fileds in webdynpro aba

Hello Gurus,
We have a requirement to maintain select-options for multiple fileds in webdynpro abap.
now we are able to create select-options for a single field using wdr_select_options componet usage.
how can we achive this select-options feature for multiple fields.
Could anyone please suggest solutions?
and if possible send me the sample code for this requirement.
Thanks in Advance for your replies.
Regards,
Shyam

Hi,
Nothing different for more fields, same. some declaration changes.
For example code i am using.. in WDDOINIT method.
TYPES:
    fiscal_year TYPE RANGE OF GJAHR,
    S_KUNNR TYPE RANGE OF J_3RS_KUNNR,
    S_VKORG TYPE RANGE OF VKORG_RAN,
    status type PVWTY-RETPA,
    ty_r_date TYPE RANGE OF s_date,
    ty_s_date TYPE LINE OF ty_r_date.
DATA lo_interfacecontroller TYPE REF TO iwci_wdr_select_options .
DATA lo_cmp_usage TYPE REF TO if_wd_component_usage.
lo_cmp_usage =   wd_this->wd_cpuse_cmp_sel_opt( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
lo_cmp_usage->create_component( ).
ENDIF.
* Reference variable used instantiate the select-options component
DATA
    lr_cmp_usage TYPE REF TO if_wd_component_usage.
* Variables used to create the select-options fields and
* define its initial values
DATA:
    lr_field TYPE REF TO data,
    ls_date TYPE ty_s_date.
FIELD-SYMBOLS:
    <fs_field> TYPE ANY,
    <fs_range> TYPE INDEX TABLE.
* Instantiate the select-options component
lr_cmp_usage = wd_this->wd_cpuse_cmp_sel_opt( ).
IF lr_cmp_usage->has_active_component( ) IS INITIAL.
    lr_cmp_usage->create_component( ).
ENDIF.
lo_interfacecontroller =   wd_this->wd_cpifc_cmp_sel_opt( ).
wd_this->m_sel_opt = lo_interfacecontroller->init_selection_screen( ).
data : vhelp type wdy_md_value_help_mode_enum .
* Sets the helper reference
wd_this->m_sel_opt1 = wd_this->wd_cpifc_cmp_sel_opt( ).
wd_this->m_helper = wd_this->m_sel_opt1->init_selection_screen( ).
* Hide the standard select-options components.
wd_this->m_helper->set_global_options(
    i_display_btn_cancel = abap_false
    i_display_btn_check = abap_false
    i_display_btn_reset = abap_false
    i_display_btn_execute = abap_false
lr_field = wd_this->m_helper->create_range_table( `KUNNR` ).
wd_this->m_helper->add_selection_field(
    i_id           = `KUNNR`
    I_DESCRIPTION = 'Customer Code'
*    i_within_block = `BL01`
    it_result      = lr_field ).
FREE lr_field.
lr_field = wd_this->m_helper->create_range_table( `VKORG` ).
wd_this->m_helper->add_selection_field(
    i_id           = `VKORG`
    I_DESCRIPTION = 'Sales Organization'
*    i_within_block = `BL01`
    it_result      = lr_field ).
FREE lr_field.
Go through this..
http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproABAP-Complexselect-optionscomponent+usages
Cheers,
Kris.

MSS Time Approval - multiple (different) selection options for manager?

Hi all
I am setting up MSS Time Approval delegation in ERP2005 without workflow, leave request, nor portal development environment set up.
In this case, the customer needs to have multiple selection options for who to approve:
1. The manager's direct reports (standard functionality)
2. All subordinates, all levels down
3. Delegate's (manager or non-manager) view of a particular (other) manager's direct reports
3b. This might extend to a set of different delegation selections
4. Add or remove certain individuals
Now, getting 3. and 4. to work was simple using the BAdI (I think the enhancement spot is named APPR_CUST), method ...-edit_selection, but I am having difficulties with 2. and 3b. Now I am thinking along these lines, and I would greatly appreciate your input:
A. It seems that the MSS "Approve working time" app only loads the data selection at the entry into this screen (INIT command from portal), using the start perspective determined for example by the IMG for defining the approval profile <-> view. My debugging suggests that the view change from the drop down menu (CHANGE_PERSPECTIVE command) only picks a different way to present the same data set.
Could anybody please confirm or contradict this conclusion?
B. Is it possible to present the entire "Approve working time" section in MSS in multiple different copies so that they would all generate an INIT command? Or is it possible to copy and modify the entire MSS tab, resulting in an ESS tab, one MSS, one "D"SS, one "A"SS (well, not suggesting that the top manager is one, but you get the drift...) and so on?
If either of this were possible, it would be simple to make two modifications, one at the beginning of the FM called by the portal and one at the FM that returns the start perspective.
So far I have been trying to catch and alter the CHANGE_PERSPECTIVE command into an INIT in the back end, but the Time Approval functionality is a bit too complex for me to feel entirely comfortable with this approach.
Your input is much appreciated!
Kind regards
Niclas Arndt

We too are using MSS for time approval of time entered via ESS. We are on ECC 6.0 for the backend (no enhancement packs, at least not yet), currently sp stack 10 with hrsp 24, and EP 7.0 with stack 10 for the ESS/MSS business packages. We are using the standard MSS UWL functionality for the approval, so it is workflow-based in my understanding.
In other parts of MSS, the managers can see a few levels deep in the organization structure, based upon the definition we gave for their structural profiles. For instance, in the team calendar/overview, or other team information, they have a choice for multiple levels or only direct reports. However, in the time approval application, only direct reports are shown, so if a manager goes on vacation, at present the only way to cover time approvals for that manager's employees appears to be to temporarily assign a new 'chief' to that org unit, so HR involvement becomes necessary. The manager doesn't have any method for delegating the approval or other MSS authorities. We were hoping that by allowing multiple levels in the structural profile, such approvals would "roll up" to the next level, i.e. the manager's supervisor, so the next level manager could act as a backup to his/her managers on vacation. That doesn't work, however.
We have heard that a delegation feature for MSS will be available in an upcoming release, but I haven't found any information regarding whether that requires an upgrade, an enhancement pack, a later service pack level, or what or when that functionality will be available. Does anyone know anything about that?
Regards,
Matt

How to make select-option for one inner table

Hi,
Who can teach me to make select-option for a inner table, which let select-option display data from this inner table.
Thanks in advance.

Is this what you are looking for?
report zrich_0002.
data: begin of itab occurs 0,
      matnr type mara-matnr,
      spras type makt-spras,
      maktx type makt-maktx,
      end of itab.
select-options: s_matnr for itab-matnr.
select-options: s_spras for itab-spras.
start-of-selection.
select mara~matnr makt~spras makt~maktx
           into corresponding fields of table itab
                  from mara
                        inner join makt
                           on mara~matnr = makt~matnr
                                    where mara~matnr in s_matnr
                                      and makt~spras in s_spras.
check sy-subrc = 0.
Regards,
Rich Heilman

Select-option field leveln validation

Hi folks.
can you please tell me how to do a select-option field leveln validation, i know how to do incase the filed is defined as parameter. here my field is defined as select-option.
SELECT-OPTIONS: C_CTLPC FOR KNKK-CTLPC.
here i need to check for both low, high intervals?
please help me, thanks in advance.
regards
priya

Hi again,
1. so i need to validate that filed should contatin '01' not '1'
U can validate like this.
2. Data : myval like knkk-ctlpc.
   myval = '01'.
   if myval in c_ctlpc.
    else.
   *----- code for error message
endif.
regards,
amit m.

Select-options for time stamp

Any ideas on which data element to be used for select-options for timestamp on the screen so that a user is able to f4 help too.
i am using data element 'tzntstmps' but i am not getting f4 help for it.

Hello Trivenn
I do not think it makes sense to search for any other timestamp data element which might be part of a search help.
TZNTSTMPS = UTC Time Stamp in Short Form (YYYYMMDDhhmmss)
How could such a search help look like? A calendar control combined with some kind of "time control"?
You may facilitate the entry of time stamps in such a way that if the user enters only a date in the LOW field (e.g. 20080422 without time) you change it AT SELECTION-SCREEN (PBO of your selection screen to 20080422000000).
Correspondingly, you change a date value (e.g. 20080422) at the HIGH field into 20080422235959).
If, however, the user enters already a complete timestamp you do not change anything.
Regards
Uwe

Select-options for OO Methods

Hi all,
How can I define select-options for a method in a global class.
And how can I pass these select-options from a report.
Thanks & Regards
Eshwar

Hi all,
How can I define select-options for a method in a global class.
And how can I pass these select-options from a report.
Thanks & Regards
Eshwar

Multiple select options for an input field

Hi All,
We have a requirement where in we need to provide multiple select options for an input field in a BSP application and get output relevant to all the given inputs(do not require range).
Please do let me know how to solve this.
Thanks & Regards,
Lavanya .

Hi,
The requirement is : Suppose there is a input field PLANT.
If we give input for plant it gives related output.
Now if it is required to give 5 or 6 inputs..like plant1,plant2...plant6 and get the output related to all 6 inputs.
(Like we implement in ABAP)
Please do let me know how can this be implemented in BSP.
Thanks & Regards,
Lavanya.

Select option for selection valid and invalid data.

Similar Messages

Maybe you are looking for