Select - option in se51

Hi,
Please help,
how to create a select-option in se51 screen.
Or we can say a range on the screen using se51.
thanks
abhishek prakash

Abhishek prakash,
Yes. It is possible to create select-option on the screen by SE51 transaction.
1.
Define the selection-screen as subscreen in the top include of module pool program.
create modulepool program SAPMZ_SELOPT
Place the below code.or u can define that in top include.
REPORT SAPMZ_SELOPT.
TABLES :pa0001.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
SELECT-OPTIONS: p_bukrs FOR pa0001-bukrs.
SELECTION-SCREEN END OF SCREEN 100.
2.
Goto garphical layout editor, drag Subscreen and drop on screen means define Subscreen area on the screen.
Place the below code in the PBO.
process before output.
" MODULE STATUS_1001.
call subscreen sub_area including 'SAPMZ_SELOPT' '100'.
process after input.
" MODULE USER_COMMAND_1001.
Its working fine. We can write code like that as well.
I hope that your problem is solved
Regards,
Venkat.O

Similar Messages

Select-options in SE51 with problem

Hi!
I´m trying to put select-options in screen by SE51.
I create a subscreen:
selection-screen begin of screen 9001 as subscreen.
select-options: so_matnr for mara-matnr.
selection-screen end of screen 9001.
And i call this screen in PBO of my screen 9002:
call subscreen sub01 including sy-repid '9001'.
The select-options appear all right but the button that add more registers (that i could hide with command NO-EXTENSION) not working.
How can i put SO in my screen and all functions work fine??

Try making your screen wider.
On a screen that I have created, all of the buttons are there.
Rob

ZScreen(SE51) Input field should have Select option

Hi ,
I need to create one Select option on Screen designed using screen painter .
Later I want to use in PAI of screen in select query as Select option .
Mean to say in where clause of select query i have to use <b>IN</b> for that input field .
Looking for some helpful responses .
SS

Hi,
You can create a selection screen by using the normal SELECT-OPTIONS command as a subscreen and then call the subscreen in your main screen.
SELECTION-SCREEN BEGIN OF SCREEN scr AS SUBSCREEN.
call the sub screen using normal command.
CALL SUBSCREEN b INCLUDING prog dynnr .
regards,
Mahesh

Select-option in Module Pool-Error-Include block not specified .........

Hi,
I am trying to define a select-option at Module Pool level.
In the program
SELECTION-SCREEN BEGIN OF SCREEN 1010 AS SUBSCREEN.
SELECT-OPTIONS: V_BWTAR FOR MSEG-BWTAR.
SELECTION-SCREEN END OF SCREEN 1010.
In the Screen flow logic it is as follows
PROCESS BEFORE OUTPUT.
MODULE STATUS_0600.
CALL SUBSCREEN sub_1010 INCLUDING sy-repid '1010'.
PROCESS AFTER INPUT.
CALL SUBSCREEN sub_1010.
MODULE USER_COMMAND_0600.
At SE51 it is showing an error
"Include block not specified,not defined or spelt incorrectly.".
Please let me know how to correct this.
Thanks,
K.Kiran.

HI Emre
I am having the same issue. there is not possible to create a subscreen by se51 since I already define the subscreen by selection-screen begin of screen *** as subscreen.
regards TP

Issue In Providing 255 Charcters From The Selection Screen Select-Option

Dear Guru,
I am searching for table field with having length = 255 character.
which i want to use in select-option for proving data from the selection screen.
I have found the table myhlp and it associated field allvals which is having length = 255.
I am using it as below in my selection screen for the value to be provided 255 character long.
SELECTION-SCREEN : BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
SELECT-OPTIONS   : s_mlbody FOR myhlp-allvals NO INTERVALS.
SELECTION-SCREEN : END OF BLOCK b3.
Now when i am going for the multiple selection option --> It is providing me the Multiple selection popup and giving me the provision of provide multiple line .
But the issue is that --> For a particular single value line in the popup i am able to enter only 45 charcters not 255 character.
But i need to put 255 charcter for particular line in a single value..
Please give me some guideline how resolve this or any other alternative way of reading the 255 charcter from the selection screen
Thanks & regards
Saifur Rahaman

Hi,
     As said by A@s selction screen with table control will be a good option.
design a custom screen with SUBSCREEN as screeen attribute using tcode se51.
For table control sample - go through Tcode ABAPDOCU - abap user dialogs-screens-complex screen- table control
Try Following,
REPORT Zsample .
controls: tc type tableview using screen 200.
parameters: p_user type myhlp-username.
data: begin of itab occurs 50,
      field1(255) type c,
      end of itab.
data: i_out type standard table of myhlp.
SELECTION-SCREEN BEGIN OF TABBED BLOCK MAX FOR 22 LINES.
SELECTION-SCREEN TAB (25) TABS1 USER-COMMAND UCOMM1
         DEFAULT SCREEN 200.
SELECTION-SCREEN END OF BLOCK MAX.
start-of-selection.
select * from myhlp into table i_out for all entries in itab
          where username eq p_user
                and allvals = itab-field1.
MODULE READ_ITAB INPUT.
insert itab index tc-current_line.
ENDMODULE.                 " READ_ITAB INPUT

Report painter select options

How can i have a select option in report painter similar to normal report program.

hi,
r u asking about screen painter se51,if so there we dont have any option like select option.
there we need to drag and drop 2 input boxs and one text box for 'to' in between those two input boxes and in program we need to maintain all the coding as one low and one high value that's it.

Report help for multiple Date Select options

Hi Friends,
For a particular year wise report, the client wants 12 date select-options which are changeable and informal every year .The report will also be displayed as per the given date selection period wise. Please help me how to fetch the datas from the table as per the given selection period. Currently the report have one date select-option where the user gives selection range as 1.04 to 31.03. It's related to EB power consumption report and hence the new requirement on date selection which are informal and not a fixed date of every year.
Ex:Selection-Screen
Period 1 : 08.04.2008 to 12.05.2008
Period 2: 12.05.2008 to 20.06.2008
Period 3: 21.06.2008 to 28.07.2008
Period 4: 29.07.2008 to 15.08.2008
Period 5: 15.08.2008 to 21.09.2008
Period 6 : 21.09.2008 to 14.10.2008
The data will derive as per the above selection ranges.......
Please advise with example.
thanks & regards
Sankar.

>
sankar babu wrote:
> Ex:Selection-Screen
> Period 1 : 08.04.2008 to 12.05.2008
> Period 2: 12.05.2008 to 20.06.2008
> Period 3: 21.06.2008 to 28.07.2008
> Period 4: 29.07.2008 to 15.08.2008
> Period 5: 15.08.2008 to 21.09.2008
> Period 6 : 21.09.2008 to 14.10.2008
Hi,
In this case just derive all records matching dates between 08.04.2008 (low in first select-options) and 14.10.2008(high in last select-options.
Also my advice is to use a single select-options and prompt the user to give the dates as ranges in the multiple entries dialog which can be opened by clicking the button on the right side of the select-options.
Regards
Karthik D

How To... Change the Data Type for a SELECT-OPTIONS at run time.

Hello,
I am trying to restrict the values available for entry into a SELECT-OPTIONS at run time depending on user input.
The logic is as follows. The user has two input fields. A PARAMETER field which has the type RSDIOBJNM and allows them to choose an InfoObject. And the user has a SELECT-OPTIONS field to allow them to select the Characteristic values for that InfoObject.
I would like the following example to be possible:
The user enters 0MATERIAL into the PARAMETER. When the user clicks on the SELECT-OPTIONS control code will derive a list of possible options the user can enter in the SELECT-OPTIONS. In this case only values found in the master data or at least no values greater than 18 characters.
I have looked at the following function module SELECT_OPTIONS_RESTRICT and this do not appear to be helpful as they only restrict on the signs allowed for the values (unless I misunderstand, it is a complex function module!).
The code I have so far is (thus the user enters a InfoObject into p_char1 and the select options so_char1 should only accept active values of that InfoObject):
declaration of variables for user interface
DATA c_char(32) TYPE c.
declaration of count variable
DATA i_count TYPE i.
declaration of user interface
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
    PARAMETERS: p_ipack TYPE RSLOGDPID.
SELECTION-SCREEN END OF BLOCK a1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
    PARAMETERS: p_char1 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char1 for c_char NO INTERVALS.
    PARAMETERS: p_char2 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char2 for c_char NO INTERVALS.
    PARAMETERS: p_char3 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char3 for c_char NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b1.
Is what I am trying to do possible???
Thanks for any help. Ross.

You really want to restrict possible values of a select-option based on another field, not change the length of type of the select-option field, right?
Here is what you do: Code a custom F4 value help for the select-option at event AT SELECTION-SCREEN ON VALUE REQUEST FOR.. The first thing you do here is read the value of the parameter field (p_ipack in your example). You can use function module DYNP_VALUES_READ. Based on this value, you can propose values for the select-option fields. Note that the use can still enter whatever s(he) wishes in to the select-option field without pressing F4. In this case, you will have to code some input validations taking into account the value in the p_ipack field.

Select-options in SELECT query - syntax error

Hi all,
I get the error below when I try to use the select options in a SELECT query . Please help me.
"The IN operator with "SO_AWART" is followed neither by an internal
table nor by a value list."
The code i have used(Logical database PNP is used):
TABLES: pernr,
        catsdb.
INCLUDE ztime_cwtr_top.    " global Data
INCLUDE ztime_cwtr_f01.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS SO_AWART FOR CATSDB-AWART.
PARAMETERS P_THRES TYPE I.
SELECTION-SCREEN END OF BLOCK B1.
Get data from CATSDB table. Workdates within the date interval are considered.
SELECT pernr workdate awart catsquantity beguz enduz status
FROM catsdb
INTO TABLE it_catsdb
WHERE pernr = pernr-pernr    AND
       workdate GE pn-begda     AND
       workdate LE pn-endda     AND
       status   IN ('20', '30') AND
       awart    IN so_awart .
      awart    IN ('1100', '1137', '1138', '1139', '1140',
                  '1147', '1148', '1149', '1157', '2003' ).
when I give the values directly i do not get any syntax error, but when I use select options in the where condition I get the syntax error.
I have tried different options like using only the select-options in the where condition.
Thanks in advance.....
Madhu

Solved.
Code with syntax error:
include z...top .
include z...fo1.
select-options: xxxxxxx
Code with no syntax error:
select-options: xxxxxxx
include z...top .
include z...fo1.
Thanks for all your help,
Madhu

How to hide some select-option of Logical Database in report?

How to hide select-option of Logical Database in report?eg . In Logical Database 'PNP' , my code is 'GET PERNR' , excute the report , select-screen is displayed . I want to hide some select-options , such as PNPPERNR-LOW .
Edited by: rongrong wang on Mar 26, 2008 9:31 AM

U need to write code in initialization as
initialization.
loop at screen.
if screen-name = 'PNPPERNR-LOW'.
screen-active = '0'.
modify screen.
endif.
if screen-name = 'PNPPERNR-HIGH'.
screen-active = '0'.
modify screen.
endif.
endloop.

Re : select-options in abap-objects program

Dear friends,
                  I want to give select-options in abap-objects program. How to give that.
                             Thanking You
with regards,
Mani

In the transaction SE24, enter your class name, click modify.
in the tab named "Types" you have to declare two types. By example, if you want to receive one select-options that in your program that uses this class is declared like:
" P_SAKNR FOR SKAT-SAKNR".
you've got to declare two types in the class:
a- TYPES: begin of E_S_SAKNR,
                      sign(1),
                      option(2),
                      low(10),
                      high(10),
                  end of E_S_SAKNR.
b - TYPES E_T_SAKNR type standard table of E_S_SAKNR.
so, in the class method that you want to receive P_SAKNR as importing parameter. You got to do this:
method TEST importing ET_SAKNR type E_T_SAKNR.
now, in the implementation of this method you should be able to use ET_SAKNR as the same way as you usually use a parameter or a select-option. You could use it in a select with the operator IN by example..

Re : select-options in abap objects

Dear friends,
I want to give select-options in abap-objects program. How to give that.
Thanking You
with regards,
Mani

HI Mani,
It's common mix ABAP Procedural with ABAP Objects in the same program.
You should use the same way used in ABAP procedural program as Marco Cerdelli sad.
But inside ABAP OBJECTS classes you can't use is these statement type.
Don't forget to close this thread and all yours previous when your question be answered ! In case of doubt read the [rules of engagement|https://forums.sdn.sap.com/].
Best Regards.
Marcelo Ramos

Select-option in ABAP objects

Hi Guys,
           I need a small help from you. I want to know how to populate the value from select-option to abap object. Please help me, it is very important

check this code
REPORT ZSELOPT_TO_CLASS .
TABLES: VBRK.
SELECT-OPTIONS: S_VBELN FOR VBRK-VBELN.
DATA: IT_VBELN TYPE RSELOPTION.
DATA: X_VBELN TYPE RSDSSELOPT.
CLASS C1 DEFINITION.
PUBLIC SECTION.
DATA: IT_VBRP TYPE VBRP_TAB,
      X_VBRP LIKE LINE OF IT_VBRP.
METHODS: GET_DATA IMPORTING S_VBELN TYPE RSELOPTION.
METHODS: DISP_DATA.
ENDCLASS.
CLASS C1 IMPLEMENTATION.
METHOD GET_DATA.
*SELECT * FROM VBRP*
   INTO TABLE IT_VBRP
   WHERE VBELN IN S_VBELN.
ENDMETHOD.
METHOD DISP_DATA.
LOOP AT IT_VBRP INTO X_VBRP.
    WRITE:/ X_VBRP-VBELN,
            X_VBRP-POSNR.
ENDLOOP.
ENDMETHOD.
ENDCLASS.
START-OF-SELECTION.
DATA OBJ TYPE REF TO ZCL_SELOPT.
CREATE OBJECT OBJ.
LOOP AT S_VBELN.
MOVE S_VBELN-LOW TO X_VBELN-LOW.
MOVE S_VBELN-HIGH TO X_VBELN-HIGH.
MOVE S_VBELN-SIGN TO X_VBELN-SIGN.
MOVE S_VBELN-OPTION TO X_VBELN-OPTION.
APPEND X_VBELN TO IT_VBELN.
ENDLOOP.
CALL METHOD OBJ->GET_DATA
                    EXPORTING
                      S_VBELN = IT_VBELN.
CALL METHOD OBJ->DISP_DATA.
Edited by: moazam hai on May 17, 2008 6:17 AM
Edited by: moazam hai on May 17, 2008 6:19 AM

Can we use select options in smartform

can we use select options in smartform if so can any one send me a sample code...
Thanks
bhaskhar

Hi ,
Can u explain why u want to use select options in smartforms . U can try it in program lines .
Its better to use select options in the driver program and fetch data accordingly in the driver program or passing the selected values from select options to the smatfrom and fdetching the data there in smartform .
Regards

Checking against Select-Options with "CP" using "IF value IN select_option"

Dear experts,
first of all: I'm sorry, if this question already should have been asked and answered!
I tried quite a lot of search terms but didn't find anything helpful.
We are using a statement like "IF value IN select_option" to perform comparisons after the Select-Options have been used in a SELECT statement. This logical expression fails (compared to the results of the DB-SELECT) whenever a select-option line contains the option CP (Contains Pattern). To be more specific: The case sensitivity of the LOW value doesn't seem to play a role any more. A variable with the value 'ABCD' would be positively checked against a select-option with OPTION 'CP' and LOW 'abc*', whereas this value wouldn't have been selected if the select-option had been used in a DB-SELECT.
Does anybody know a workaround?
Thanks in advance
Andreas

Dear Keshav,
it's an own field in an own table, defined as CHAR of length 140 (lowercase allowed), reflecting to a line of remittance info of an account statement. A regular Select-Option for this field is provided in a report which works perfectly fine regarding the case sensitivity. For reasons I don't want to point out in detail we need to check a value in this field against the select-option without selecting it from the db again.
Let's assume that a field remittance_info contains the value 'ABCD'.
A line of the select-option table looks like this:
select_option_table-SIGN = 'I'
select_option_table-OPTION = 'CP'
select_option_table-LOW = 'abc*'.
Then an ABAP statement such as
IF remittance_info IN select_option_table.
* would be true !!!
ENDIF.
but wouldn't deliver a result in a SELECT such as
SELECT * FROM my_table INTO TABLE my_internal_table WHERE remittance_info IN select_option_table.
because of the differences in lower/upper case.
regards
Andreas

Select - option in se51

Similar Messages

Maybe you are looking for