Select Options copy from clip board

Last time I checked this wasn't yet implemented and searching through the forums I have not found that to have changed. Is this still a planned feature or has it been released in some version?

Hi Sandeep,
Please Find the LInk Below
[Clip Board | http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/46/6e2e42e1ef5633e10000000a155106/content.htm]
Thanks
kalyan B

Similar Messages

Error in Copying from Clip Board F4 help in WebGUI at ITS

Hi
I am facing a problem while trying to upload from clip board in F4 .
It is giving me error "Error while calling".
the same thing is working fine in development server.
please suggest some thing .
Regards
Sachin

Reading the clipboard is a functionality which was introduced with a support package. Probably your production and development system are not on the same SAP_BASIS SP level. Dev is on a newer SP than PROD .
Regards,
Klaus

Material creating from option COPY FROM MATERIAL thru MM01

Hi All,
According to the requirement..I have to create a New Material through "Copy from material" option given in the MM01, In which it should not accept the already present OLD Material No( BISMT ) i.e. it should generate an error msg to avoid the duplication of BISMT value to the current Mat no created.
Hope my question makes a clear understandmnt of my problem......
points will be rewarded.......pls help me ASAP........
Thanking you,
Santosh...

you can put a check in exit - EXIT_SAPLMG02_002.
the syntax is like this
SELECT BISMT up to 1 rows
into l_bismt
where bismt = MATNR.
endselect.
if sy-subrc eq 0.
message e000(oo) with 'Material number already exists'.
endif.
Hope it solves ur problem.

Control the combo box select of COPY FROM in Delivery Order

Dear all
I have a requirement where in the user wants to restrict the "copy from" button on the delivery order. They want the delivery orders to be created only from Sales orders.
So that would mean that i do a bubbleevent = false when any other row is selected in the combo box dropdown. But I am not able to get the control to the combobox.
In the system information it says that the form is "-9876", but couldnt catch any event on it either.
Any suggestions to control the selection of the "COPY FROM" combobox is most welcome.
Thanks in advance
Rashmi

Hi Use This Ihave Checked This
If pVal.Before_Action Then
                If pVal.FormType = 140 And pVal.EventType = SAPbouiCOM.BoEventTypes.et_COMBO_SELECT And Not pVal.InnerEvent Then
                    If pVal.ItemUID = "10000330" Then
                        If pVal.PopUpIndicator = "2" Then
                            objAddOn.objApplication.SetStatusBarMessage("You Can Not Copy From Returns")
                            BubbleEvent = False
                            Exit Sub
                        ElseIf pVal.PopUpIndicator = "0" Then
                            objAddOn.objApplication.SetStatusBarMessage("You Can Not Copy From Sales Quotations")
                            BubbleEvent = False
                            Exit Sub
                        End If
                    End If
                End If
            End If
Mohamed Zubair

Subscreen with Select-Options called from At Selection Screen event

Dear friends,
I'm trying to call a subscreen that contains a select-options, from an 'at selection screen' event, in a report program, but without sucess.
Here's go what I'm doing:
I declared a selection-screen as subscreen in my main program, and I'm calling it from a module-pool subscreen area, to make the module-pool select-options magic.
In my main report program, I have a customized status GUI with a new toolbar button and I'm handling it at the 'at selection screen' event.
What I need to do is to call the subscreen that contains the select-options when this new customized button get pressed, but when It happens, the select-option selections pop-up doesn't appear.
If I call the subscreen from the 'start-of-selection' event, it goes fine, just don't work from the 'at selection screen'.
Any ideas on how can I do it?
Thank you,
Heber

i think you should try something like this:
at selection screen.
if condition handled ....
show_popup = 'X'.
endif.
at selection screen output.
if show_popup EQ 'X.
call subscreen
endif.

Copy to clip board

I've tried to copy a graph to clip board by using EXPORT IMAGE Property node.But when i pasted it on a word document i got a black & white image without border like the one here in attachmement.How to get the colour image Programatically (not through short cut menu)?
Attachments:
New Microsoft Word Document.doc ‏41 KB

If you don't mind a Windows only solution (which I assume you don't), you can try using the VIs we used in the Code Capture Tool, which allow copying a bitmap to the clipboard.
If you want to insert the image into a Word document, you might also try using Word's object hierarchy. There should probably be some examples in the example finder (Help>>Find Examples) and it's possible that the report generation toolkit already allows you to do this.
Try to take over the world!

Not able to select and copy from adf table in IE and chrome if we enable row selection

Hi All,
We have an adf table and user wants to select and copy table cell values.
We enabled row selection on adf table. Ifrow selection is in place, IE and Chrome are not allowing user to select and copy data. But Firefox is allowing.
Do we have any solution to this? For our customer IE is the standard browser and they do test app on IE.
Regards
PavanKumar

Hi Timo,
Sorry forgot to mention versions.
We are using 11.1.1.7 and IE 9.
I tried in Google but could not get the solution.
Kindly let me know solution for this.
PavanKumar

Problem in creating dynamic select-options creating from ';' seperated file

Hi all,
My requriement is selection screen fields will come from a flat file like below(first row is field names and remaining r field values)
For example for VBAK table
VBELN;VKORG;VTWEG;SPART
3999202;B227;BD;XX
file can be vary(number of fields) and based on table .
Please let me know how can i convert this file in to the selection-screen fields and how can i pass these values in the select statement WHERE condition....
Thank you very much,
Krishna D

Hi,
First Split the Data using Field Symbold.Because you don't know how many fields are there in the text file.
Pass the values to the below Syntax
SELECTION-SCREEN DYNAMIC SELECTIONS FOR NODE|TABLE <node>.
declares a node <node> of a logical database for dynamic selections in the selection include.
You have an Example in the Below Link.
http://help.sap.com/SAPhelp_nw04/helpdata/en/67/93b80914a911d2953c0000e8353423/content.htm
Thanks,
Venkat.
Edited by: Venkatesh Kolluru on Mar 4, 2011 6:32 AM
Edited by: Venkatesh Kolluru on Mar 4, 2011 6:32 AM

How can we get the image which is stored in clipboard by labview, is there any functions available like text from clip board

How can we get the image which is stored in clipboard by labview, i can get the text in clipboard by using invoke node directly.but i cannot get the image, is there any functions or vi available.(image is in Png format)

The Read from Clipboard method is, unfortunately, limited to text. If the clipboard contains an image then you need to use OS-specific functions calls. This is an example program for Windows. It's old, but it should still work.

DYNP_VALUES_READ Limitations for multiple lines select options

Hi all !
   First post here, but a tough one I think. Here is my inquiry :
   I have worked on an specific abap function used in many long abap list reports. Theses reports are launched in background processing. The aim of this routine is to stop the report execution if a background job with the same selection parameters is already launched for the current user (to Prevent useless several launch of a time-expensive program).
    Because this routine is dynamic, I read the selection screen of the current report with the function 'DYNP_VALUES_READ'. And I compare the result with the variant of the backgroung job (read with function 'RS_VARIANT_CONTENTS').
    The real problem is that function "DYNP_VALUES_READ" only extract the first line of select-options. I found an alternative solution to extract the select options values (a dynamic assign with field symbols), but external conversions (for WBS elements for example ) are lost, so the comparison detects differences between the background job's variant values and the current selection screen values.
    Does anybody know a way to get entire select options values from a selection screen just as they are displayed on screen ?
Thanks for reading my message
Message was edited by: Thomas BRICOUT

Thomas,
Perhaps the following code will help you. A function module in the code captures everything on the selection screen into an internal table. It doesn't actually capture the information the way you want it, but I believe you will be able to work with it to achieve your desired result. If it doesn't meet your needs, it is still useful for printing selection screen fields and their values.
Bruce
report zybttes2.
tables: zf137,   " 137 General Ledger Document Details Table
        zf137a. " 137 General Ledger Document Details Table, Archive
selection-screen begin of block b1 with frame title text-004." BCT003
parameters: p_zf137   radiobutton group xxx,                " BCT003
            p_zf137a radiobutton group xxx.                " BCT003
selection-screen end of block b1.                           " BCT003
selection-screen begin of block parameter with frame title text-001.
selection-screen skip 1.
select-options: s_date for zf137-zzpostdat.
selection-screen skip 1.
selection-screen begin of line.
selection-screen comment 3(6) text-002.
selection-screen end of line.
selection-screen skip 1.
select-options: s_loan for zf137-zzloan.
selection-screen skip 1.
selection-screen begin of line.
selection-screen comment 3(6) text-003.
selection-screen end of line.
selection-screen skip 1.
select-options: s_ccentr for zf137-zzcostctr.
selection-screen skip 1.
selection-screen end of block parameter.
data: ww(3) type n.
data: zz(3) type c.
data: c1(1) type c value '0'.
do 2 times.
ww = ww + 1.
zz = ww. shift zz left deleting leading c1.
write: / zz.
enddo.
Capture and then print the selection screen fields and their values
data: begin of i_info occurs 20,
        flag,
        olength type x,
        line like raldb-infoline,
      end of i_info.
call function 'PRINT_SELECTIONS'
exporting
    mode      = 'TABLE'
    rname     = sy-cprog
    rvariante = sy-slset
tables
    infotab   = i_info.
loop at   i_info.
write: / i_info-line.
endloop.
write: / 'end'.

Clearing the displayed value for a SELECT-OPTION

How do I clear the displayed value of a SELECT-OPTION?
I have 2 SELECT-OPTIONs on my screen (standard basic report program screen). I use code like this to populate the drop-down boxes for each one.
=====
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_prgrp-low.
PERFORM fill_prgrp_values.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_prctr-low.
PERFORM fill_prctr_values.
=====
The value the user picks for the first SELECT-OPTION will affect what values I put in the drop-down list for the second SELECT-OPTION.
If a user enters a value for the second SELECT-OPTION, and then goes back and changes the value of the first SELECT-OPTION, then I want to do two things:
1. Create a new set of values for the drop-down list for the second SELECT-OPTION (no problem; working fine);
2. Clear the displayed value from the second SELECT-OPTION that the user entered previously. That value became invalid when the user picked a new value for the first SELECT-OPTION.
How do I clear that second displayed value?
I have tried CLEAR and REFRESH for the second variable using the formats s_prctr, s_prctr[], and s_prctr-low. They will erase the values of the internal table or part(s) of it, but the displayed value stays on the screen.
I need to clear out the displayed value so the user will either leave it blank or enter or select a new value.
I am using F4IF_INT_TABLE_VALUE_REQUEST to build the drop-down lists, and it works fine, but I do not see any function module to clear the displayed value off the screen.
Thanks for your help.

Sorry, but calling DYNP_VALUES_UPDATE did not work. This is how I coded it.
fld_reset_rcd-fieldname = 'S_PRCTR'.
fld_reset_rcd-stepl      = sy-stepl.
CLEAR fld_reset_rcd-fieldvalue.      " re-initialize s_prctr
CLEAR fld_reset_rcd-fieldinp.        " what goes in here?
APPEND fld_reset_rcd TO fld_reset_tbl.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
    EXPORTING
      dyname = 'ZFI_GL_BALANCE_NGL'
      dynumb = '1000'
    TABLES
      dynpfields = fld_reset_tbl
<Added code tags>
I have discovered that CLEAR and REFRESH of s_prctr will clear it somewhat. If I enter multiple values, ranges, etc., they will all be cleared, EXCEPT for the one single value that is displayed on the main screen. It is not cleared and it remains if you push the button to display the pop-up to enter ranges, etc.
To devrath.sampat -- Thanks for your example for building the drop-down list, but that is not the problem I am having. I am already able to build it just fine.
To repeat my problem, if I:
1. first enter / select a value for the first SELECT-OPTION s_prgrp
2. then enter / select a value for the second SELECT-OPTION s_prctr
3. And finally go back and select a new value of the first SELECT-OPTION s_prgrp from its drop-down list,
     when I do, the program needs to clear the value displayed on the main screen for the second SELECT-OPTION s_prctr (any additional values, ranges, etc., are cleared by CLEAR and REFRESH, if I go look; but not the value shown on the main screen).
Edited by: Scott Crosby on Feb 14, 2012 4:20 PM
Edited by: Suhas Saha on Feb 15, 2012 12:03 PM

Select options in Objects

Hi ,
I am trying to pass select-options values from my ABAP editor to Class metod.
its giving error like *The IN operator with "S_KUNNR" is followed neither by an internal table     *.
I am not getting how to pass ranges values to method.
Get_data is my method. Importing s_kunnr type SELOPT.
SELECT kunnr
         name1
         ort01
         adrnr FROM kna1
         INTO TABLE it_kna1
    WHERE kunnr in s_kunnr.
can you let me know how to pass range values .
Regards,
sarath.

HI ,
what ever u r importing that value we need to give.
ex.
methods:
                   getmara IMPORTING matgr TYPE C
               EXPORTING l_tab TYPE ANY TABLE.
in
Method: getmara.
select matnr (some fileds ) from mara
where matkl = matgr.
endmethod.
Regards,
Bharani

Passing Select option to smartform

Hi All,
Can any one please suggest how to pass values selected in select-options to smartform.
I am aware of the iuse of var-low and Var-high,
bt what if user inputs multiple values?
Also,is there any standard table type of table that is created when we use select-options.so that we can pass this table to smartform while using select options.
Regards,
Sangvir

Build in smartform in form interface select option table
and pass the select option table from the program to the
smartform.
to build select option table in smartform you can built
type in global definition tab types.
Then, use it in form interface.

F4 Help for select-options.

Hi Experts,
I need to use F4 help for a select - options field from a particular table.I have written the below code and it worked well.
FORM sub_show_help.
SELECT bukrs
   FROM zfica_accurate
    INTO TABLE gt_accurate.
    delete ADJACENT DUPLICATES FROM gt_accurate.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'BUKRS'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = 'S_CMCODE'
      window_title    = 'COMPANY CODE'
      value_org       = 'S'
      multiple_choice = 'X'
    TABLES
      value_tab       = gt_accurate
      return_tab      = gt_return.
s_cmcode-sign    = 'I'.
s_cmcode-option = 'EQ'.
LOOP AT gt_return INTO gw_return .
    s_cmcode-low = gw_return-fieldval.
    APPEND s_cmcode.
ENDLOOP.
READ TABLE s_cmcode INDEX 1.
IF sy-subrc = 0.
    gw_dynpread-fieldname = text-018.
    gw_dynpread-fieldvalue = s_cmcode-low.
    APPEND gw_dynpread TO gt_dynpread.
UPDATE THE SCREEN FIELD VALUES
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = sy-repid
        dynumb               = sy-dynnr
      TABLES
        dynpfields           = gt_dynpread
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        undefind_error       = 7
        OTHERS               = 8.
ENDIF.
IF sy-subrc <> 0.
    MESSAGE i003.
ENDIF.
The problem is , I need to create a new type for s_cmcode(select-option ) field with the same structure as the select-option and the code is as below. I have created an internal table gt_sfield similar to s_cmcode . I have replaced s_cmcode with gt_sfield but the below code is not working. Its the same as the above program but its not showing up the values in the field.Could anyone please help me.
fORM SUB_SHOW_HELP.
SELECT BUKRS
   FROM ZFICA_ACCURATE
    INTO TABLE GT_ACCURATE.
gt_sfield[] = s_cmcode[].
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD        = 'BUKRS'
      DYNPPROG        = SY-REPID
      DYNPNR          = SY-DYNNR
      WINDOW_TITLE    = 'COMPANY CODE'
      VALUE_ORG       = 'S'
      MULTIPLE_CHOICE = 'X'
    TABLES
      VALUE_TAB       = GT_ACCURATE
      RETURN_TAB      = GT_RETURN.
LOOP AT GT_RETURN INTO gw_return.
      gw_sfield-SIGN    = 'I'.
      gw_sfield-OPTION = 'EQ'.
    MOve gw_return-fieldval to gw_sfield-low.
    APPEND gw_sfield to gt_sfield.
ENDLOOP.
READ TABLE gt_sfield INDEX 1 INTO gw_sfield .
IF SY-SUBRC = 0.
    gw_dynpread-fieldname = 'S_CMCODE'.
    move gw_sfield-low to gw_dynpread-fieldvalue.
    APPEND GW_DYNPREAD TO GT_DYNPREAD.
UPDATE THE SCREEN FIELD VALUES
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        DYNAME               = SY-REPID
        DYNUMB               = SY-DYNNR
      TABLES
        DYNPFIELDS           = GT_DYNPREAD
      EXCEPTIONS
        INVALID_ABAPWORKAREA = 1
        INVALID_DYNPROFIELD = 2
        INVALID_DYNPRONAME   = 3
        INVALID_DYNPRONUMMER = 4
        INVALID_REQUEST      = 5
        NO_FIELDDESCRIPTION = 6
        UNDEFIND_ERROR       = 7
        OTHERS               = 8.
ENDIF.
IF SY-SUBRC <> 0.
    MESSAGE I003.
ENDIF.
ENDFORM.

Hi,
The fucntion module 'DYNP_VALUES_UPDATE' should be used only for updating the screen field values. In your case you are updating the internal table using this function module.
Thanks
Pavan

Passing value to select options screen.

Hi All,
Can anybody help me how to pass a value to select option screen from another screen?
It's like a user enters a value in a input field and press a button to navigate to the next screen which contains the select option fields.How can i show the value enterd in the previous screen to be shown in one of teh input field in the select option screen.

Hi,
Store the values that you have to pass in a global variable declared in component controller and
Use the following piece of code in the second view,
DATA: lt_range_table TYPE REF TO data,
          rt_range_table TYPE REF TO data,
          read_only TYPE abap_bool,
          typename TYPE string.
* create a range table that consists of this new data element
lt_range_table = lo_r_helper_class->create_range_table( i_typename = 'MATNR' ).
FIELD-SYMBOLS: <tab> TYPE INDEX TABLE,
<struct> TYPE ANY,
<wa> TYPE ANY,
<option> TYPE char2,
<sign> TYPE char1,
<high> TYPE ANY,
<low> TYPE ANY,
<wa_values> TYPE ANY.
ASSIGN lt_range_table->* TO <tab>.
APPEND INITIAL LINE TO <tab> ASSIGNING <wa>.
ASSIGN COMPONENT 'OPTION' OF STRUCTURE <wa> TO <option>.
ASSIGN COMPONENT 'HIGH' OF STRUCTURE <wa> TO <high>.
ASSIGN COMPONENT 'LOW' OF STRUCTURE <wa> TO <low>.
ASSIGN COMPONENT 'SIGN' OF STRUCTURE <wa> TO <sign>.
<sign> = 'I'. "Default sign which you want to give
<option> = 'EQ'. "Default option you want to give
<low> = 'M-01'." pass your valriable name here
*<high> = 'High_value'.
* add a new field to the selection
lo_r_helper_class->add_selection_field( i_id = 'S_MATNR'
i_description = 'Material'
it_result = lt_range_table ).
Regards,
Radhika.

Select Options copy from clip board

Similar Messages

Maybe you are looking for