Select options for the pnp logical database.

Hi ,
We get a default selection screen when we use logical database in HR ABAP.
But we always get the selection elements as "PARAMETERS" and not as "SELECT-OPTIONS".
How can we change it to select options ....
I tried all the options in HR- Report categories but it is not working..
Kindly Help..
Regards,
Ashwin.

>
ASHWIN JOHARI wrote:
> Hi ,
> But we always get the selection elements as "PARAMETERS" and not as "SELECT-OPTIONS".
> Ashwin.
Which fields? Almost all of them are defined SELECT-OPTIONS.. you dont' see the range option directly.. click on he options icon & you can enter the ranges.
~Suresh

Similar Messages

Select-options when Using PNP logical database

Hi ,
We get a default selection screen when we use logical database in HR ABAP.
But we always get the selection elements as "PARAMETERS" and not as "SELECT-OPTIONS".
How can we change it to select options ....
I tried all the options in HR- Report categories but it is not working..
Kindly Help..
Regards,
Ashwin.

Hi,
execute the program. In the selection screen
For eg:
personel Number select the Mutiple Selection option. After that select the tab select intervals and u can give the range.
Regards,
Srinivas

SFLIGHT is NOT defined for the current logical database.

I have just started learning ABAP and bought an ABAP Objects book by Horst Keller. I have installed 4.6d mini sap and SAP GUI 6.4 on win XP Prof. I executed S_FLIGHT_MODEL_DATA_GENERATOR to load DB tables.
(1). When I tried to check a sample program, I get an error message SFLIGHT is not defined for the current logical database.
Here is the partial code:
REPORT zbcb01f1 .
TABLES: sflight, sbook.
DATA: BEGIN OF sr OCCURS 100,
      carrid LIKE sbook-carrid,
      connid LIKE sbook-connid,
      fldate LIKE sbook-fldate,
      bookid LIKE sbook-bookid,
      order_date LIKE sbook-order_date,
      loccuram LIKE sbook-loccuram,
      END OF sr.
GET sflight.   <---- Error is pointed here
(2). I am also not getting Graphical Screen Painter when selecting Layout for a screen. Instead, I am getting alphanumeric editor.
Someone please help me.
Raizak.

Hi Raizak,
the easiest way is to go to service.sap.com/notes and enter the note number. For this time I've copied the 2 notes below.
Best regards,
Christian
Symptom
The Graphical Layout Editor of the Screen Painter either does not start or terminates.Error message 37527 is displayed in the session in which the call was made (Graphical Layout Editor not available.
Additional key words
() EUNOTE, EUSCREENPAINTER, 37 527
Cause and prerequisites
This note comprises all the common causes for error message 37527 and provides you with information on how to systematically trouble shoot the problem.
1. Windows32 or UNIX/motif?
As of Release 4.6B there is only the program version for 32bit Windows (NT, 95, 98, 2000 ff.).Up to Release 4.6A there was also a version for UNIX/Motif.All of the more current notes (with the exception of Note 45490) refer only to the Windows version.
2. Termination at the start or during use?
The following diagnostic steps refer to the causes of the errors which prevent the Graphical Layout Editor from starting. However, there are also known error causes, which result in the program terminating when the application is being used and which also produce the 37527 error message. This affects -
Rel.4.6C/D: Termination when attempting to read texts in the logon language -> Note 375494
Crash after transferring program and dictionary fields. Termination after transferring program and dictionary fields -> Note 189245
Release 3.1I: Termination after inputting field text -> Note 113318
3. Is the SAPGUI installation correct?
The Graphical Layout Editor is automatically installed during the standard installation of the SAPGUI.If you chose a non-standard installation, then you should have explicitely selected its installation (component "Development Tools - Graphical Screen Painter").
The program executable is called gneux.exe.During the SAPGUI installation it is placed in the same directory as the SAPGUI programms (for example, front.exe) (usually C:\Program Files\SAPpc\sapgui). The following belong to the program:
- An additonal executable gnetx.exe (RFC starter program)
- the DLL eumfcdll.dll
- various eusp* data files (that is, the names all begin with eusp.)
You can check the completeness of the program installation by starting the program gneux.exe locally in the SAPGUI directory (for example, by double-clicking on the program name in the Explorer window).The Layout Editor is displayed with German texts and an empty drawing area for the pseudo screen EUSPDYND 0000.
If the installation is not complete, an error dialog box provides information regarding the cause of the error, for example, sometimes the DLL eumfcdll.dll is missing after reinstalling the SAPGUI. For example, the eumfcdll.dll DLL was sometimes missing after the SAPGUI was reinstalled.
4. System link defined and okay?
The Graphical Layout Editor is a separate program which is started by the Screen Painter Transaction (SE51) on the Frontend machine.
Up to Release 3.0F, the programs communicated with each other via the graphics log of the SAPGUIs (gmux).The definition of the environment variable SAPGRAPH may be the cause for the program not being being found where it is.
As of Release 3.1 G, the programs use a separate RFC link which is set up in addition to the SAPGUI's RFC link.Missing or incorrect definitions of the RFC destination EU_SCRP_WN32 or problems with the creation of the RFC link are the most frequent causes for error message 37527 being displayed.Below you can find the correct settings for the RFC destination EU_SCRP_WN32 (under "Solution").Note 101971 lists all the possible causes for problems with the RFC link set-up. Attention:The Graphical Layout Editor may not be operated through a firewall (for example between the SAP and the customer system) because this does not allow an additional RFC connection in addition to the SAPGUI.
Solution
ad 1 UNIX/Motif
Note 45490 describes possible errors resulting from an incorrect program installation under UNIX/Motif (up to Release 4.6A).
ad 2 Termination when using
The above-mentioned notes may contain options for solving individual problems.However, you usually have to replace the program with an corrected version.You can do this either by downloading a patch from sapservX or by installing a more current SAPGUI.The patch is mentioned in the respective note.
ad 3 Installation
You either need to reinstall the SAPGUI or manually copy the missing file into the SAPGUI directory.In both cases you should make sure beforehand that a Graphical Layout Editor is no longer running.To do this you can either remove all processes gneux.exe from the process list by using a tool such as Task Manager (on WindowsNT) or exit the Graphical Layout Editor from the Screen Painter Transaction menu via Edit -> Cancel Graphical Screen Painter). Attention:For each session or system an individial Layout Editor process may exist so that, if need be, several processes should be cancelled.
ad 4 System link
Up to Release 3.0F:you can either delete the environment variable SAPGRAPH or copy all the files of the Graphical Layout Editor into the directory which is specified by SAPGRAPH.
As of Release 3.1G:you can use Transaction SM59 to check the RFC destination EU_SCRP_WN32 (expand the TCP/IP connections, select destination EU_SCRP_WN32).If the destination is missing, then you should create it with the following settings:
- Connection type "T" (start of an external program via ...)
- Activation type "Start"
- Start on "Front-end workstation"
- Front-end workstation program "gnetx.exe" (caution! NOT gneux.exe)
- Description (optional) "Graph. Screen Painter (Windows32)
Start Program gneux.exe using the gnetx.exe starter program."
If you want to start the program from a different directory than the SAPGUI standard directory, then replace the default value under Frontend work station by the complete path name for program gnetx.exe.Transaction SM59 also allows you to check the RFC connection via the pushbutton "Test connection").In this case the system attempts to localize and start the program gnetx.exe.If there are errors, a message is displayed regarding the possible causes (for example, gateway problem, timeout problem or the like).Note 101971 provides a detailed explanation of the problems involved with an RFC connection set-up.As the Graphical Screen Painter requires a functional RFC connection as of Release 3.1G, contact the System Administrator or create an message on the topic Middleware (BC-MID-RFC) if you encounter RFC problems.
If the program gnetx.exe can be found and started, the banner dialog box with logo, release data and version number is displayed briefly.As the Layout Editor itself is not started, the error cause must be in the installation of the Layout Editor program gneux.exe if the connection test was successful.
Release 4.5A to 4.6B: Use with Releases <3.1G>.
The Graphical Layout Editor is downward-compatible as regards the system connection, that is, an RFC-based Layout Editor for example from Release 4.6C can also be used on a non-RFC-based Screen Painter, for example of Release 3.0F.However, the releases mentioned above have a program error which causes a crash due to memory violation in the start phase of the program.Note 197328 describes the solution by installation of the corrected program version.
Important: Trace file dev_euspNNN!
If none of the diagnosis steps leads to the cause of the error and to the solution of the problem via the corresponding note, then you should add the contents of the trace files dev_euspNNN (NNN = process number) to the message for SAP, if possible.You can find this file in the current directory of the SAP System, for example under Windows NT in C:\Winnt\Profiles\<user>\SAPworkdir.If several such trace files can be found there, make sure that you use the file which matches the termination time with respect to date and time of creation.In most cases the ERROR message in the last lines of this trace file provides an important note on the cause of the error.
Source code corrections
Symptom
The graphic layout editor of the Screen Painter cannot be started (RFC version).
Other terms
() EUNOTE, EUSCREENPAINTER
Reason and Prerequisites
This is generally caused by the fact that the RFC connection between the frontend graphics layout editor and the calling screen painter program at the backend cannot be set up.
Possibility 1: Route permission denied
In the trace file dev_eusp<Process Id> of the graphics layout editor you find the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR route permission denied (<Front-Id> to <BackId>,<Service>)".
If there is a firewall between frontend computer and application
server, you need to decide whether the port for the RFC of the graphical layout editor can be released here (see Solution 1 below).
In case no firewall exists between the frontend computer and the application server, in its route permission table, the SAProuter contains either no entry for the frontend computer, on which the graphics layout editor is started, or the entry says that the link is saved by a password.Since the connection is denied, the graphics editor processes exits again, and the screen painter switches to the alphanumeric layout editor.
Possibility 2: Service 'sapgw<ServiceId>' unknown
In the trace file dev_eusp<ProzessId> of the graphics layout editor you have the entry "ERROR in RFCMgr_accept: not accepted", and in the RFC trace file dev_rfc.trc you have an entry of the form "ERROR service 'sapgw<ServiceId>' unknown".
The service sapgw<ServiceId> (for example, sapgw00) is not known on one of the computers participating in the RFC communication because the corresponding entry is missing in its service file. The affected computer can be the frontend computer or the gateway computer.
Possibility 3: The system parameter gw/cpic_timeout value is too low
This system parameter determines how many seconds the gateway is waiting for the RFC connection to be set up.In case of a high network load, the default value of 20 seconds is too small with the result that the connection cannot be created on time.Here the graphics layout editor process also exits with the trace file entry "ERROR in RFCMgr_accept: not accepted".
Possibility 4: System parameter abap/no_sapgui_rfc set
The profile parameter abap/no_sapgui_rfc of the system is set (that is, it has a value not equal to space or 0).This prevents the program of the graphics layout editor from being started with RFC at the frontend.
Possibility 5: Unnecessary authorization check
The error message "No RFC authorization for user xxxxxx" is generated although the check of the RFC authorization was deactivated by profile parameter auth/rfc_authority_check (value = space or 0). The problem is caused by a program error, that ignores the value of the profile parameter let during the call of the RFC authorization check (see Note 93254). This error can occur as of Release 4.5.
Solution
ad 1) If a Firewall is installed between frontend computer and the application server, you need to decide whether the port for the RFC link of the graphical layout editor shall be released in the firewall. This is port 33nn, where nn is the 2-digit system number of the SAP application server. As of Release 3.1G, the graphical layout editor needs an RFC link for communication with the application server in addition to the already existing linkof the SAP GUIs. Such a second link is not allowed by the firewall in general because it would contradict the security concept (password protection, logging of the connection).
If no firewall exists, you should check whether the frontend computer can be added to the route permission table or whether the password option can be removed from out of the available entry.
For details refer to chapter 4.4 of the attached Note 30289.
ad 2) Include service sapgw<ServiceId> in the service file.
Refer to Note 52959 for details.
ad 3) Increase value for system parameter gw/cpic_timeout. 60 seconds should be sufficent as a timeout limit.
ad 4) Set the system parameter abap/no_sapgui_rfc to space or 0
Start the application server so that the new parameter value comes into effect.
ad 5) Import the Support Package specified in the attachment for the release in question or implement the advance correction in the source code as described in the attached correction instructions.
As a workaround, assign RFC authorizations as described in Note 93254.

"PERNR" is not defined for the current logical database.

Hi Experts,
I have developed a program for HR salary variance but when i execute i getting error in the line " get PERNR"
the "PERNR" is not defined for the current logical database. so plz suggest me to avoid this issue.
Thanks,
Rajesh

the codes are has below,
*& Report ZHRSAL_COMP
REPORT ZHRSAL_COMP.
tables: pernr,
        t512t.                      "Wage type texts
infotypes: 0001. "Organizational Assignment
*Tables data containing directory to PCL2 payroll results file.
data: begin of rgdir occurs 100.
        include structure pc261.
data: end of rgdir.
data: result type pay99_result.
data: rt_header type line of hrpay99_rt.
data: country like t001p-molga,
      number like pc261-seqnr. "Number of last payroll result
types :begin of struc_p0001,
       pernr type p0001-pernr,
       ename type p0001-ename,
       werks type p0001-werks,
       btrtl type p0001-btrtl,
end of struc_p0001.
data : gtab_p0001 type table of struc_p0001,
       gwa_p0001 type struc_p0001.
types : begin of struc_payroll,
        text(10) type c,
        date     type dats,
        month(2) type c,
        year(4) type c,
        abkrs(2) type c,
        end of struc_payroll.
data : gtab_payroll type table of struc_payroll,
       gwa_payroll type struc_payroll.
types : begin of struc_result,
       lgart type lgart,
       lgtxt type t512t-lgtxt,
       betrg type betrg,
        end of struc_result.
data : gtab_result type table of struc_result,
      gwa_result type struc_result.
get pernr.
rp_provide_from_last p0001 space pn-begda pn-endda.
call function 'CU_READ_RGDIR'
    exporting
      pernr          = p0001-pernr
    importing
      molga           = country
    tables
      in_rgdir        = rgdir
    exceptions
      no_record_found = 1
      others          = 2.
if sy-subrc = 1.
    write: / 'No records found for '(001), pernr-pernr.
endif.
call function 'CD_READ_LAST'
    exporting
      begin_date      = pn-begda
      end_date        = SY-DATUM
    importing
      out_seqnr       = number
    tables
      rgdir           = rgdir
    exceptions
      no_record_found = 1
      others          = 2.
if sy-subrc = 1.
    write: / 'No payroll result found for'(002), pn-paper.
else.
    call function 'PYXX_READ_PAYROLL_RESULT'
         exporting
              clusterid                    = 'RX'
              employeenumber               = p0001-pernr
              sequencenumber               = number
        READ_ONLY_BUFFER             = ' '
        READ_ONLY_INTERNATIONAL      = ' '
        CHECK_READ_AUTHORITY         = 'X'
   IMPORTING
        VERSION_NUMBER_PAYVN         =
        VERSION_NUMBER_PCL2          =
         changing
              payroll_result               = result
         exceptions
              illegal_isocode_or_clusterid = 1
              error_generating_import      = 2
              import_mismatch_error        = 3
              subpool_dir_full             = 4
              no_read_authority            = 5
              no_record_found = 6
              versions_do_not_match        = 7
              others                   = 8.
    if sy-subrc = 0.
      perform print_rx.
    else.
      write: / 'Result could not be read (003)'.
    endif.
endif.
      FORM PRINT_RX                                        *
      Print Payroll Result                                 *
form print_rx.
format intensified on.
write: / p0001-pernr,
           p0001-ename(15),
           p0001-werks,
           p0001-btrtl.
format intensified off.
skip 1.
move p0001-pernr to gwa_p0001-pernr.
move p0001-ename(15) to gwa_p0001-ename.
move p0001-werks to gwa_p0001-werks.
move p0001-btrtl to gwa_p0001-btrtl.
append gwa_p0001 to gtab_p0001.
write: / 'For period/payroll area: '(004),
           30 result-inter-versc-fpper+4(2),
           result-inter-versc-fpper+0(4),
           result-inter-versc-abkrs,
           / 'In-period/payroll area: '(005),
           30 result-inter-versc-inper+4(2),
           result-inter-versc-inper+0(4),
           result-inter-versc-iabkrs.
skip 1.
gwa_payroll-text = 'For'.
move result-inter-versc-fpper to gwa_payroll-date.
move result-inter-versc-fpper+4(2) to gwa_payroll-month.
move result-inter-versc-fpper+0(4) to gwa_payroll-year.
move result-inter-versc-abkrs to gwa_payroll-abkrs.
append gwa_payroll to gtab_payroll.
gwa_payroll-text = 'In'.
move result-inter-versc-fpper to gwa_payroll-date.
move result-inter-versc-inper+4(2) to gwa_payroll-month.
move result-inter-versc-inper+0(4) to gwa_payroll-year.
move result-inter-versc-iabkrs to gwa_payroll-abkrs.
append gwa_payroll to gtab_payroll.
write: 'Results table: '(006).
skip 1.
loop at result-inter-rt into rt_header.
    perform re512t using result-inter-versc-molga
                         rt_header-lgart.
    write: / rt_header-lgart,
             t512t-lgtxt,
             rt_header-betrg currency rt_header-amt_curr.
move rt_header-lgart to gwa_result-lgart.
move t512t-lgtxt to gwa_result-lgtxt.
move rt_header-betrg to gwa_result-betrg.
append gwa_result to gtab_result.
endloop.
endform.                    "print_rx
      FORM RE512T                                          *
      Read Wage Type Texts
form re512t using value(country_grouping)
                  value(wtype).
check t512t-sprsl ne sy-langu
     or t512t-molga ne country_grouping
     or t512t-lgart ne wtype.
select single * from t512t
              where sprsl eq sy-langu
              and   molga eq country_grouping
              and   lgart eq wtype.
if sy-subrc ne 0.
    clear t512t.
endif.
endform.                                                    "re512t

How to create the select option for the Plant in screen (Module pool)

HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Cross post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

Steps to get SELECT-OPTIONS in module pool programs.
1.Start one dialog program with SAPMZ_001.
Place the below code in the TOP include of the dialog program.
TABLES marc.
SELECTION-SCREEN BEGIN OF SCREEN 3200 AS SUBSCREEN.
SELECT-OPTIONS: werks FOR marc-werks.
SELECTION-SCREEN END OF SCREEN 3200.
2 .Create one screen 3000.
Go to Layout of the screen and Define subscreen area on the screen and Name it as l_subscreen.
Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN l_subscreen INCLUDING 'SAPMZ_001' '3200'.
PROCESS AFTER INPUT.
CALL SUBSCREEN l_subscreen.
Activate all.
Create Transaction code for the dialog program .
Execute the transaction code. You will see the select-option for werks how we see on Selection-screen.

BeX: Select option for the variable of the report in Portals

Hi Gurus,
In the variable selection screen of the BW reports, I have 'Employee Number' field tab. I have some 3000-4000 employee numbers in a file daily. Generally, I use the option "upload from a file/clipboard" in the multiple selection dialog box that you get after clicking the "more" button.
But the users report only in the Portals, where this option is not available. They do not want to use BeX reporting rather.
what should be done to achieve the same functionality in Portals ?
Any solutions or hints please....?
Points will be awarded.....
Regards,
Srinivas

Hi Suresh,
Those values may not be assigned (OM,OS) to your profile , aas that vriable is Authorisation Process type , i belive u have to be assigned to them,
I hope it helps
Regards,
BRB

Using PNP logical database in report

Hi i'm using the PNP logical database in my report, and i want to hide all fields in the 'Period' frame.
is there any way to do it automatically or is it necessary to hide them one by one??
Thanks in advance.

If you can put them all in the same screen group, you may be able to do this. But you might run into problems when you re-generate.
Rob

Restrict Select-Options for Logical Database field

The way we restrict select options for custom defined select option fields on selection screen.. can we restrict select options for standard Logical Database fields?
i.e. report uses PNPCE logical database and has field called PERNR. I want to restrict select options for this PERNR field so that it has options for 'Select single values' only.
Thanks,
Falguni
Edited by: Falguni V on Nov 13, 2010 6:42 AM

You can user AT SELECTION-SCREEN event, and check whether any record is having high value for PNPPERNR.

Selection Screen of PNP Logical database

Experts,
I am stuck up in filtering of data.
I am using PNP logical database in Adhoc Query, if I select Current Month as data selection than also it is giving all list of data..
Can anyone give Input to me.
it is urgent.
Point will revert for useful answer.
Hetal.

how about if u do this step
1. Goto- Attribute.
2. Click "Change"
3. Click 'HR Report Category'
4. Click 'Create Report Category'
5. Click 'new entries' for careating Report Category
5. Select newly create report category
6. Click the folder 'Definition of Organizational Selection'.
7. Click 'New entries'.
8. Here you assign the required fields to be displayed, for eg pywerks - personal area.
9. finally assign this newly created 'report category' in the screen you will get upon clicking 'HR report Category' button in the Program attribute screen.
Hope this may help you. I am not much into hr abap. but sharing the info which i am aware.

Mandatory field in selection screen of pnp logical database report

Hi experts,
Im using pnp logical database in my report.
It give the standard selection screen. I need to make some fields in the selection screen as mandatory like pnpwerks.
How its possible. Give me some solution.
Thanks,
Priya.

how about if u do this step
1. Goto- Attribute.
2. Click "Change"
3. Click 'HR Report Category'
4. Click 'Create Report Category'
5. Click 'new entries' for careating Report Category
5. Select newly create report category
6. Click the folder 'Definition of Organizational Selection'.
7. Click 'New entries'.
8. Here you assign the required fields to be displayed, for eg pywerks - personal area.
9. finally assign this newly created 'report category' in the screen you will get upon clicking 'HR report Category' button in the Program attribute screen.
Hope this may help you. I am not much into hr abap. but sharing the info which i am aware.

Standard screen for PNP logical database

hello All,
I am using PNP logical database and i have modified the standard selection screen for PNP.
But now there is a button that appears , although the rest is supressed as i wanted it to.
Our forums active contrubutor suresh datti has provided me a solution before to go to sytem then status and then click screen 100 then invisible the push button and activate and re-execute the program. The method seems to work fine. But surprisingly after some time the button appears again..
any idea..??
thanks,
Reena..

>>>I do not knw how to create a variant or how variant are related to selection screens..can u please elaborate..
Don't worry..then its not the issue..
anyway Pl take a look at the following <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/c0/980374e58611d194cc00a0c94260a5/frameset.htm">SAP Help</a> on Variants.
~Suresh

Can we disable the anti-alias option for the quick selection tool?

Can we disable the anti-alias option for the quick selection tool?
I can deselect it with the magic wand but not with the quick selection. Any ideas?
thanks,
Dominik

I don't think you can, but in the refine edge dialog you can use the contrast setting to get rid of most of the anti-alias.
MTSTUNER

Is there a discount option for someone running Logic 8 who wants to upgrade to 9? I know the price of 9 has been reduced in the App store but there always used to be a discounted upgrade option. Just wondered.

Is there a discount option for someone running Logic 8 who wants to upgrade to 9? I know the price of 9 has been reduced in the App store but there always used to be a discounted upgrade option. Just wondered.

Hi
Short answer.... No... not any more
CCT

Issue with 900 screen of PNP logical database.

Hi Experts,
I am using 900 screen in PNP logical database and assigned the default report catagory.
But in the selection screen when I click on further selection and select any of the parameter like company code/cost center, nothing comes in to the screen.
Request to let me know any issue there?
Br/Manas

hi
After selecting the fields from further options are you first adding them and then saying ok or just saying ok. Please check and let me know.
If you add and then say ok these fields appear on the screen,
Santoshi

Line item in PNP logical database

Hi All,
Can anyone tell me, what is the selection logic for PNP Logical database, suppose in one report we use PNP Logical database,
So when we put some date range, so in the output of report there are 2 fields, so during that date range 1 field occurs two time and other field 4 times, so how many line items would be displayed by that report.
Regards,
Kumar

read documentation for report SAPDBPNP or SAPDBPNPCE.

Select options for the pnp logical database.

Similar Messages

Maybe you are looking for