SELECT-OPTIONS on custom screen problem

Hi all,
I have a screen added on the standard transaction IW21 (with selection screen definition and called like subscreen). On this screen I have some SELECT-OPTIONS and when I press the button of selecting multiple values, I get the following message: "Requested function & is not available here" (V0 104), where & is long number starting with %..No matter the error message, the values are transferred correctly from the multiple selection screen to my screen. I have added entries to the tables T185F and T185 with the transaction VFBS, but I dont know how to assign the Function codes to SELECT-OPTIONS..
Thanks in advance for feedback!
Anna

Hi, this is copied from SELECT-OPTION documentation:
The LOW and HIGH fields of a selection option are displayed in a length up to 18 bytes long (scrollable up to 45 bytes). If you define a length longer than 45, fields are truncated on the selection screen after the 45th character. This affects the first line of the SELECT-OPTIONS table. You can, however, use SUBMIT to pass longer selection options to a report if they are specified with the addition NO-DISPLAY and thus do not appear on the selection screen. Without NO-DISPLAY, the fields are then truncated whenever the selection screen is processed in the background ( SUBMIT without VIA SELECTION-SCREEN).
regards,

Similar Messages

Innput field with Select option on custom screen

Hi,
I need to create an Input field with Select Option(No interval) button on Custom dialog screen .
Is there any idea how can I create it on screen ?
Thanks
Sachin

create a normal inputfield and place an icon next to it. then in the pai on click of that button use the following code.
data: wf_tab_field like rstabfield occurs 0 with header line ,
      wf_exl_opt like rsoptions .
refresh: wf_tab_field .
    move: 'KOSTL' to wf_tab_field-fieldname ,
          'CSKS' to wf_tab_field-tablename .
    append wf_tab_field .
    clear wf_tab_field .
    move: 'X' to wf_exl_opt-bt ,
          'X' to wf_exl_opt-cp ,
          'X' to wf_exl_opt-ge ,
          'X' to wf_exl_opt-gt ,
          'X' to wf_exl_opt-le ,
          'X' to wf_exl_opt-lt ,
          'X' to wf_exl_opt-nb ,
          'X' to wf_exl_opt-np .
call function 'COMPLEX_SELECTIONS_DIALOG'
     exporting
       title                   = 'Select Cost Centers'
       text                    = 'Cost Center'
*         SIGNED                  = 'X'
*         LOWER_CASE              = ' '
*         NO_INTERVAL_CHECK       = ' '
*         JUST_DISPLAY            = ' '
*         JUST_INCL               = ' '
        excluded_options        = wf_exl_opt
*         DESCRIPTION             =
        help_field              = 'CSKS-KOSTL'
*          SEARCH_HELP             = 'KOST'
        tab_and_field           = wf_tab_field
      tables
        range                   = r_kostl
     exceptions
       no_range_tab            = 1
       cancelled               = 2
       internal_error          = 3
       invalid_fieldname       = 4
       others                  = 5
    if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    if not r_kostl[] is initial .
      read table r_kostl index 1 .
      if sy-subrc eq 0 .
        move: r_kostl-low to wf_t_kostl .
      endif .
    endif .
wf_t_kostl is the screen field name.
Raja

Error V0 104 while adding select option on customized screen

Hi all,
I have a screen added on the standard transaction IW21 (with selection screen definition and called like subscreen). On this screen I have some SELECT-OPTIONS and when I press the button of selecting multiple values, I get the following message: "Requested function & is not available here" (V0 104), where & is long number starting with %..I have added entries to the tables T185F and T185 with the transaction VFBS, but I dont know how to assign the Function codes to SELECT-OPTIONS..
Thanks in advance for feedback!
Anna
Edited by: Anna L on Jul 16, 2008 11:03 AM

Just an explanation: no matter the error message I get, the values are transferred correctly from the multiple selection screen to my screen.
I hope somebody got similar case and can give me some hint...
Thank you,
Anna

How to get the values of Select-options from the screen.

The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS   s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = zlv_dynpro
      dynumb     = syst-dynnr
      request    = 'A'
    TABLES
      dynpfields = temp_fields
    EXCEPTIONS
      OTHERS     = 0.
LOOP AT temp_fields INTO dyn_field.
    IF dyn_field-fieldname EQ 'S_PO-LOW'.
        SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
        WHERE ebeln EQ dyn_field-fieldvalue.
        EXIT.
    ENDIF.
ENDLOOP.

Select Options in custom controller

Hi,
Any one please let me know how to put select options on custom container. I need to display select options based on the input a tree and a report should be displayed in the same screen along with input screen.
So I planned object oriented program to split screen to display tree and report. and again I split left side container to 2 containers. Now I want put the selection screen on left top container.
Please help.
Chandra

What you can do is the following:
Define a Container Object on one side of the screen to place the ALV Tree, and a Subscreen area on the other side, so you can place your select-options right there:
You can define the select-options this way:
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
SELECT-OPTIONS : s_ebeln FOR ekko-ebeln ,
s_ebelp FOR ekpo-ebelp .
SELECTION-SCREEN END OF SCREEN 100 .
And then in the flow logic of your dynpro, assign this selection screen to your subscreen area. (Called SUB1 in this case)
call subscreen sub1 including sy-repid '0100'.
Regards

Output from tables which I mention in select options of the screen as input

Dear All,
I want to fetch the data in the form of output from tables which I will mention in select options of the screen as input.
In selection screen option if I write any table name then how can i select this table in select query of ABAP program ?.
I may select any tables in select options of screen. But In select query I should get that table name automatically.. How ?
e.g. If i put table name as an input i.e. MARA in select option .
In program how to write select query to get records from that table ?
SELECT MTART MATKL from MARA
Every time I should not go to select query of program & replace the tablename.
How to solve this problem ?

Hi,
PARAMETERS p_table(30)." type string.
"This is a Tested code Just Execute and Check
START-OF-SELECTION.
DATA: lt_tmp TYPE REF TO data.
DATA : line TYPE REF TO data.
FIELD-SYMBOLS: <lt_tmp> TYPE STANDARD TABLE, <wa>, <dyn_field>.
CREATE DATA lt_tmp TYPE STANDARD TABLE OF (p_table).
ASSIGN lt_tmp->* TO <lt_tmp> .
CREATE DATA line LIKE LINE OF <lt_tmp>.
ASSIGN line->* TO <wa>.
SELECT * FROM (p_table) INTO TABLE <lt_tmp>.
IF sy-subrc = 0.
    LOOP AT <lt_tmp> ASSIGNING <wa>.
      DO.
        ASSIGN COMPONENT sy-index
           OF STRUCTURE <wa> TO <dyn_field>.
        IF sy-subrc NE 0.
          EXIT.
        ENDIF.
        IF sy-index = 1.
          WRITE:/ <dyn_field>.
        ELSE.
          WRITE: <dyn_field>.
        ENDIF.
      ENDDO.
    ENDLOOP.
ENDIF.
Cheerz
Ram

Multiple select-options in a screen But no screen space

Dear Experts,
I have mutiple select options in a screen, i am finding it a problem to display them all in one screen.
it should be done with out any vertical scroll nor horizontol scroll.
Awaiting to hear from you all.
Regards,
Karthik

Hi,
You can include more than one selct options or parameters in a single line..that might be favourable as u do not want to have scrolls..
the syntax goes like this
SELECTION-SCREEN BEGIN OF LINE.
<declare your parameters and select options>
SELECTION-SCREEN end OF LINE.
whatever u have written between begin of line and end of line will appear in a line..in this way you can reduce the page size..Hope the information was useful.
Regards
Vasavi
Edited by: Vasavi Kotha on Jan 6, 2009 5:29 PM

Create a select option in a screen

Is it possible to create a select option in a screen?
I can easily create the 2 input boxes, but not with the little button on the right like when we create a select option in a report.
Is the any other simple way to create a select option without creating a report? (the reason is because I want to have everything in the same module pool)

Hi,
Please refer to SAP's documentation here: http://help.sap.com/saphelp_nw70/helpdata/en/e4/2adbec449911d1949c0000e8353423/frameset.htm.
Especially Part 'Subscreens and Tabstrips for Selection Screens', there go to 'Selection Screens as Subscreens'.
HTH, Gerd Rother

How to create the select option in the screen

HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Please search before asking - post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

Try RANGES.
The RANGES has same structure as that of select-options.

Select-options/range in screen

Hi all,
I just wanted to display select-options in the screen numbered 1000,
by putting which control can i do this ??........
regards
Jose

if u want to pass values in the selection screen use
Ex:
         selection-screen begin of block b1
           select-options : p_matnr for mara-matnr.
         selection-screen end of block b1.
else if u want to pass while execution of program
use Ranges
Ex: ranges: p_matnr for mara-matnr.
         Pass variables
         p_matnr-low, p_matnr-high....................
Regards,
Ajay

How to pass values to select options of custom transactions?

I have to call custom transaction-ZMM_POST from my custom report.
I have to pass values to select options(Not to parameters) of ZMM_POST from my report only.
Please tell me how to pass values to select options of custom transactions?

Have you tried this?
DATA: T_RSPARAMS TYPE STANDARD TABLE OF RSPARAMS WITH HEADER LINE.
T_RSPARAMS-SELNAME = "S_BUKRS".
T_RSPARAMS-KIND = "S".
T_RSPARAMS-SIGN = "I".
T_RSPARAMS-OPTION = "BT".
T_RSPARAMS-LOW = "100".
T_RSPARAMS-HIGH = "300"
APPEND T_RSPARAMS.
SUBMIT Z_DUMMY WITH SELECTION-TABLE T_RSPARAMS.
Greetings,
Blag.

Select options in dialog screen

Hi all,
I have used this logic in my program (ZSDIC001),
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
            p_rad2 radiobutton group grp1,
            p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
                s_matkl for mara-matkl,
                s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*&      Module STATUS_0100 OUTPUT
module status_0100 output.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
endmodule.
*&      Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
create   screen 100 and create a subscreen area called "subscreen_1010"
Screen Flow Logic follows
*process before output.
module status_0100.
call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
call subscreen subscreen_1010 .
module user_command_0100.
But i get this error,
Error when generating the selection screen "1010" of report "ZSDIC001".
Can anyone help me out to solve this problem.
Thanks,
Rajesh.

I've copied your code and it generated fine without any error.
Possibly your subscreen container is to small.
Regards
Tobias

How to pass standard program selection options to custom program?

Hi... i want to use standard program select-options in a custom program.. actually in a custom program i'm using one standard program and one custom program. standard program contains selection scren. i want to use that selection screen in custum program.
can anybody please provide solution for this.
looking forward for ur updates

first you must find where the selection screen logic is written in standard one.once you get this details than you may Include the same screen and include program in your zprogram.and here your work is not finished you may need to do some change apart from copy all this details.
Amit.

How do I pass SELECT-OPTIONS to another screen via CALL TRANSACTION?

Good day, everyone!
I am writing a program that will be passing PARAMETERS and SELECT-OPTIONS values to another transaction via the CALL TRANSACTION statement. I'm new at this, and I've run into a problem. I have several fields that are defined as SELECT-OPTIONS, like so:
SELECT-OPTIONS so_ccode FOR fkkop-bukrs.
The user may select multiple values, enter a range, exclude certain values, etc. -- the things a SELECT-OPTIONS allows.
But how do I pass all of this to a field on another screen using CALL TRANSACTION when I only have two fields (BDCDATA-FNAM and BDCDATA-FVAL) available to me? That works fine for PARAMETERS, but I can send low/high values, different signs/options, etc. for the SELECT-OPTIONS variables.
Please help!! Points awarded for all helpful answers.
Thank you,
Dave

Don't use CALL TRANSACTION. Use SUBMIT instead.
Rob

Select-options in SE51 with problem

Hi!
I´m trying to put select-options in screen by SE51.
I create a subscreen:
selection-screen begin of screen 9001 as subscreen.
select-options: so_matnr for mara-matnr.
selection-screen end of screen 9001.
And i call this screen in PBO of my screen 9002:
call subscreen sub01 including sy-repid '9001'.
The select-options appear all right but the button that add more registers (that i could hide with command NO-EXTENSION) not working.
How can i put SO in my screen and all functions work fine??

Try making your screen wider.
On a screen that I have created, all of the buttons are there.
Rob

SELECT-OPTIONS on custom screen problem

Similar Messages

Maybe you are looking for