Select Preferred Vendor in Describe Requirement not working

Dear all
We are in SRM4.0, Classic Scenario, R/3 4.6c backend
When I create a Describe Requirement and then go to Source of Supply tab to propose a preferred vendor, I am able to search for a vendor (valid for my POrg), to select one but it is not transferred to my SC. Why?
I had the impression that it was working in the past but I am not sure and I don't what I changed to cause the problem
Thanks for your help
RD

RD-
This does seem very strange and it does work in a standard system. Given this it seems that you ought to look for any changes you have made recently - in particular have you done anything in the document change badi that might be causing the source to be lost?
Have you tried the scenario running bbpsc01 in gui mode - does the issue persist in that case? If so check out HTML template changes?
Just my thoughts on your potential problem area.
Regards-
b

Similar Messages

Shopping Cart creation through describe requirement not working.

Dear All,
         We are in to technical upgrade of SRM 4.0 to 5.0 (CS). With SRM 5.0 we have ECC6 as a backend system.
         On SRM 5.0, we could successfully create SC from Internal Goods/Services & against that shopping cart a PO gets created in backend. But when we try to create shopping cart from describe requirement the system throws following error messages,
1.     Enter company code
2.     No logical system for FI maintained. Inform system admin.
3.     Error in account assignment for item 1
4.     Error in partner transfer
5.     Not possible to calculate tax
Plz, help to solve this error.
Regards,
Vivek

Hi
Try to clear one by one error
What is the company code in BAsic data of SC?
Run a report BBP_CHECK_CONSISTENCY for that user for sc.
Howerver verify these following configuration.
Implementation Guide (IMG): Supplier Relationship Management ® SRM Server ® Cross-Application Basic Settings ® Account Assignment ® Define Account Assignment Categories
Implementation Guide (IMG): Supplier Relationship Management ® SRM Server ® Cross-Application Basic Settings ® Account Assignment ® Define G/L Account for Product Category and Account Assignment Category- here there is a setting Product category, Accounr assigmnment (CC,WS , logical system name anf Gl acount) check it upi.
Most of the data comes from your org structure only. However check it your settings which i mentioned.
regards
Muthu

Why does right clinking on link and selecting open in new tab does not work?

Why does right clinking on link and selecting open in new tab does not work?
It opens up a blank page. The only way to make the link work is to click on the navigation bar in the new tab and press enter to reload the link.

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. 
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Preferred Vendor serch help does not retrieve values

Hi,
SRM 5.0, Classic scenario
I have successfully replicated the Vendors. But I don't see the vendors in the "search help" when I create a SC.
It seems to me that I have implement the OSS note 845883. Can someone please confirm it.
With regards,
Pranav

Hi,
Apply this note and it should fix your problem:
Note 845883 - Preferred vendor search help does not retrieve values
Some other useful OSS notes ->
968251 BBPSC02:In source of supply preferred vendor not validated
1017288 SRM@ERP : no vendor replication into follow-on documents
831833 Search help for preferred vendor does not update data
980450 Shopping cart: search help for preferred vendor
860886 Incorrect search results for deleted 'Preferred Vendor'
711197 Preferred vendor not copied from template
739531 Preferred vendor/service agent must not be changeable
733899 Complete shopping cart: Preferred vendor disappears
634794 Preferred vendor: partner not found
726102 Performance in vendor search help
647760 Shopping cart: Preferred vendor / partner not
BR,
Disha.
Pls reward points for useful answers.

Describe Requirement Not going to Sourcing?

We have a setting for sourcing active as follows "Soucing carried out for Items W/O SOS" and as per my understanding, when I do a describe requiement, the SC should go to Sourcing even when the SC has supplier since this is only a preferred vendor. In the BBP_PD txn the sourcing indicator is Blank, Why is not going to souring ?

Hi All,
The solution is pretty simple, whenever you do a client Copy, the Sourcing entries become inaffective, and you need to delete and recreate the entries. Now Describe requirement does go to sourcing even after preferred vendor is selected (thats how it should be becuase preferred vendor is not a fixed vendor).
The reason for deletion might be because the entries in sourcing are driven by logical system. and where ever logical system is there, the entries need to recreated.
Thanks.

TWO CRITICAL BUGS: 1) File, "Save Page As" and 2) right-click the picture and select "Save Image As", both do not work at all in Firefox 27, 28, and 29!

Note: capitals are used only to highlight important words.
PLEASE, TAKE THESE COMMENTS ON TWO CRITICAL BUGS VERY SERIOUSLY BECAUSE THE BUGS DESCRIBED BELOW ARE SO CRITICAL THAT I CANNOT USE THE LATEST VERSION OF FIREFOX UNLESS THEY DO NOT APPEAR IN THE LATEST VERSION AND THEREFORE I AM FORCED TO REVERT BACK TO FIREFOX 26.
I have Windows 7 64-bit and Firefox 26. I could not install Firefox 27, 28, and 29 due to the persistent presence of the two critical bugs described below. I have 8 GB of RAM and an Intel quad-core processor and a lot of hard disk space available.
I installed Firefox 27 and then Firefox 28 a while back and these two bugs described below were still present and now I have just checked again with Firefox 29 by installing it and yet again, these two bugs described below are present!! UNBELIEVABLE THAT THESE TWO CRITICAL BUGS ARE STILL PRESENT IN FIREFOX 29 WHEN I CLEARLY INFORMED YOU ABOUT THEM IN THE HELP, SUBMIT LINK OF FIREFOX!!
I am forced to revert to Firefox 26!
First, I use Windows 7 64-bit and I always use Firefox with at least 120 tabs opened. BUT I have 8 GB of RAM, an Intel core i7 quad-core processor and more than 1 TB of hard disk space. Consequently, I do not understand why I would have these two critical bugs.
With Firefox 26, I also have at least 120 tabs opened when I start Firefox and I do not have the two critical bugs described below, therefore I do not believe that the number of tabs is the reason of the two critical bugs that are present in Firefox 27, 28, and 29.
---FIRST CRITICAL BUG:
When I open ANY web page and do File, "Save Page As", the window that is supposed to open to locate the folder where I want to save this web page does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---SECOND CRITICAL BUG:
When I use Google Images, for instance entering model in the search field of Google Images and then pressing enter.
Then I select any picture, open to a new tab this selected picture, then open a new tab by selecting the option View for this picture. Then right-click the picture and select "Save Image As".
Again, the window that is supposed to open to locate the folder where I want to save this picture does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---THESE TWO CRITICAL BUGS DO NOT APPEAR WHEN I USE INTERNET EXPLORER 11.
I have no idea if you will be able to reproduce these two critical BUGS but I can assure you that they are not present when I use Firefox 26 and they are present when I use Firefox 27, 28, and 29. More, be aware that I have at least 100 tabs opened but I also have this same number of tabs opened in Firefox 26 and yet I do not experience these two critical bugs when I have Firefox 26!
Once again, these two bugs touch at two vital, critical very basic functions of Firefox and therefore I will NOT be able to use any version above 26 if these two bugs are still present, as they are present in Firefox 27, 28, and now 29!!!
Please, make it a priority to solve these two critical bugs. Thanks.
I did read a post related to the same issues “Firefox stops responding when trying to "save page" or "save image" | Firefox Support Forum | Mozilla Support” at https://support.mozilla.org/en-US/questions/991630?esab=a&as=aaq
I am still reading it again to try to figure out exactly what the person did to make his problems be solved, as the post is not clear at all on what solved the problems!
In any case, all the suggestions proposed in this post do not work and I surely cannot do a system restore when it is obvious that the two bugs do not appear in Internet Explorer.

First, I sent an email to the author of PhotoME to inform him of the serious issues his addon caused with Firefox latest versions.
Now, for those of you who do not have the PhotoME addon and yet experience the same problem that I had and that I described above, I suggest the following strategy.
As PhotoME did cause these problems with Firefox latest versions, I am pretty covinved other addons probably might cause these problems too. Therefore, adopt the following method.
Test one addon at a time to see if this particular addon is behind your Firefox issues like the ones I had.
So, disable one addon only at a time. Then close your Firefox and restart it from scratch and see if you still have your Firefox problems. You must restart the Firefox browser from scratch. If you still have these Firefox problems, re-enable the disabled addon, restart your Firefox (again!) and repeat the same method for every single addon that you have.
Try to be selective by choosing first addons that are more likely to cause your Firefox problems such as not very well-known or not very popular addons (like it was the case for the PhotoME addon).
If this method works or if it does not work, report it on this web page so that others can be helped with your comments.
I hope this method will help you because I was really upset that I had these Firefox problems and I first thought it was the fault of Firefox, only to discover later that this PhotoME addon was the culprit and had caused me such upset.

In LabVIEW OI the Run Selected Step Using Test UUTs does not work

TestStand LabVIEW Operator Interface (old style) - TestStand Version 2.0.1 & 3.0
The Interactive option was enabled for the Process Model Entry Point - Test UUTs in the SequentialModel.seq.
When selective steps were selected to run within the LV OI using the menu item 'Run Selected Step Using - Test UUTs' it was found not to work.
The reason for it not working was because the main event string was "Run Selected Step 0" but this isn't available in the case statement. Changing the "Run Selected Step 1".."Run Selected Step 9999" to "Run Selected Step 0".. didn't produced the desired result. Instead of the selected steps running using the entry point Test UUTs, the steps ran without the process model.
The Case Statement string was retored back to "Run Selected Step 1".
The changes that are required to make the "Run Selected Step 1".."Run Selected Step 9999" work with either of the Entry Points are as follow.
In the VI TestStand - Create Entry Point Menus for Interactive Exec.vi
Insert an Increment from the iteration terminal of the FOR loop. This ensures the Message Queue string generated is in the range 1 - 9999 not 0 - 9999.
In the TestStand - Sequence Display.vi
For the Main Message Event "Run Selected Steps", "Run Selected Step 1".."Run Selected Step 9999"
In the case "1, Default", decrement the input 'Entry Point Index' to the VI TestStand - Start Interactive Entry Point Execution.vi. This ensures the Entry Point Index starts from the value 0.
Now when the selected steps are run using a Pocess Model Entry Point, they run correctly.
This problem only appears to affect the LabVIEW Operator Interface and only the old style. The new style that comes with TestStand 3.0 runs correctly.
There is one other problem. When an Operator is logged in to TestStand, the Entry Point - 'Single Pass' is disabled. But this is not reflected to the menu item 'Run Selected Step Using'. Both 'Test UUTs' and 'Single Pass' are available to the operator.
The reason for this is because in the VI 'TestStand - Create Entry Point Menus for Interactive Exec.vi' the sub menu item is enabled as a result from the property Sequence.AllowInteractiveExecutionOfEntryPoint. This is not enough to disable the 'Single Pass'. The Engine.CurrentUserHasPrivilege needs to be checked as well. Which means modications to the VI 'TestStand - Create Entry Point Menus for Interactive Exec.vi'.
Hope is maybe of help to anyone that may need to use this option.
Regards
Ray Farmer
Regards
Ray Farmer
Attachments:
In_Labview_OI_-_Run_Selected_Steps_Using_Test_UUTs_doesnt_work.txt ‏3 KB

Thanks Ray for the "heads-up". )
I am about to implement a vi which calls TestStand functions. This vi will allow to select tests and permits test re-entry (loops) if the user has supervisor privileges.
I will consider what you recommend in this string.
I will also provide feedback on this thread if I discover anything .... let's say "unusual"..
On another note, I am using TestStand 3.0 I have not observed any problems when running selected steps or run selected steps using single pass. I have also within TestStand set privileges for certain Operators to do the same. They have not reported any problems.
Thanks,
JLV

'select all' in pages 'shapes' does not work

When drawing 2-D floor plans using Pages / Shapes......the 'Select All' function does not work !
I am uisng Mountain Lion, v 10.8.3
Any help will be appreciated
Thanks
Sheldon

Hi Sheldon,
Is your document based on a Page Layout Template?
In Pages, a floor plan is more suited to a Page Layout document (which mimics a drawing app) rather than a Word Processing document.
Here is a document that I created with Template Chooser > Page Layout > Blank.
I added some Shapes and Text Boxes.
'Select All' (command a) selected everything:
I hope this helps.
Regards,
Ian.

Select All in a table does not work for Drag and Drop

Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
Does anyone know how to get Select All to work for a Drag Source?
Thanks.
-Ed

Frank-
OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
Thanks again for the reply.
-Ed

Select list with bind variable does not work

Hi,
What can be wrong with a 'select list' with the a simple select
select omschrijving o, id i
from basiscodes b
where domein = 'OPTIES'
and b.id in
(select eo.basiscode_id from evenementen_opties eo
where eo.event_id = :P16_ID)
The :P16_ID has a value and should give result
But it does not work at all with 'select list'
Using the POPUP LOV (display discription, return key value) works nice
The select retuns less then 10 records

Hi Flavio,
As I explained, the P16_ID is an item of the master page (page 16)
In Page 18 where I want to reuse that value, the item is not there, but I use it to assign
P18_EVENT_ID with the value in P16_ID and that works fine.
In an after submit process, I do this :
declare
function get_pk return varchar2
is
begin
for c1 in (select EVENEMENT_INSCHRIJVING_SEQ.nextval next_val
from dual)
loop
return c1.next_val;
end loop;
end;
begin
:P18_ID := get_pk;
:P18_EVENT_ID := :P16_ID;
:P18_CREATIE_DT := TO_CHAR(SYSDATE,'DD-MM-YYYY HH24:MI:SS');
:P18_CREATIE_USER := APEX_APPLICATION.G_USER;
end;
The value P16_ID is there before I open page 18
I made a display item that displays the value P16_ID
If I change the LOV select in :
select b.omschrijving o, b.id i
from basiscodes b
, evenementen_opties eo
where b.domein = 'OPTIES'
and b.id = eo.basiscode_id
and eo.event_id = 16
then it returns the value I want : 1 record
You see, I'm a really new one in apex.
Forms 6i was easier for me...
Regards Jules
null

Photoshop CC opens Application Manager, says "Sign in Required", not working. Help?

Photoshop CC today opens Adobe Application Manager, says "Sign in Required", but with correct info gives error message. Also, CC desktop not working. I haven't had any problem in the previous two months. I also was just build two weeks ago, and had to update my billing information. I tried online chat, after 30 minutes of typing, I've been disconnected twice. The funny thing is, Photoshop CC does open, and it works fine. However this message is irritating concerning. I'm on a Mac running the latest operating system and hardware.

Please Update CC App from following link:
http://www.adobe.com/appsmanager/index.html and then try signing in.
Do let us know if it works for you.
Regards
Pragya

The "portable document format" icon is a Word 2010 icon, so selecting Adobe Reader as action does not work to display the PDF.

In the Applications tab -- Content Type -- the "portable document format" icon is a Word 2010 icon (not Adobe), so selecting Adobe Reader or preview in Firefox as action does not work to display the PDF. I can see this Applications difference because my other Firefox laptop has the Adobe icon, and I can view PDFs. Essentially, a PDF is coming in as a Word document -- and the computer tries to open it up as a Word file.
How do I get the correct PDF icon in the Applications list -- the same way it displays (and works) on my other laptop.

Adobe PDF Plug-In For Firefox and Netscape 10.1.7 ?
I think you need to add this to the list of applications and the action to take on the type of content. This can also be managed in the about:permissions page. [[Permissions Manager - Give certain websites the ability to store passwords, set cookies and more]]

SELECT with pattern CP '50*' is not working on material numbers MATNR

Hello,
I have a specific matchcode for searching on material numbers with a function module as selection method.
In this function module, the SELECT clause is built dynamically as bellow.
      SELECT (temp3)
        INTO CORRESPONDING FIELDS OF TABLE result_tab UP TO CALLCONTROL-MAXRECORDS ROWS
         FROM (temp)
         WHERE (temp2) .
In the "temp2" variable, I use RANGES for the selection simply built with values of SELECT-OPTIONS coming from the search help selection screen.
I am facing the following problem :
When a search is executed on material number with the following pattern '50*' --> nothing is found !
When I run a search on '50575' --> the material number is found !
I expect it is a problem of convertion routines (external to internal format) but I am not able to fix a solution...
We are in SAP_BASIS 700.

I think it can be done.
I have -
CONCATENATE 'Z+_'   '00+' INTO r_ranges-low .
    r_ranges-sign = 'I'.
    r_ranges-option = 'CP'.
    APPEND r_ranges.
    SELECT ar_object FROM toasp
      INTO CORRESPONDING FIELDS OF table lt_toasp
       WHERE ar_object IN r_ranges.
And it returns all values with pattern 'Z_00'.
(Z1_001, Z1_002 etc.)
If the pattern '50*' is not working, you could try using '50+++'.
Regards,
MaryM

OBIEE 11.1.1.6.5 - selection steps on a calculation does not work correctly

I have a tabular report with a hierarchy column (cost centre) on the left, which is displaying at the top level (total company). The report has a metric for actual ytd, one for budget ytd and a calculation for variance (actual ytd - budget ytd).
When I add a selection step to keep only the top 10 cost centres at the bottom level of the hierarchy based on the variance, the report returns the top 10 cost centres based just on actual ytd ie only the first part of the calculation. It seems to ignore the whole calculation even though it has brackets around it. The selection step appears to be written correctly when I view it in the report but it is not working as I expect.
Has anyone got any thoughts on why this might be and if there is a solution. I have put brackets around the entire calculation, but it doesn't seem to make any difference, it still bases its selection on the first measure it finds in the calculation.

Just curious - do you have multiple "pages" of information - like maybe a time dimension in the paging prompt? I've found numerous issues where, if you have multiple "pages" of info, selection steps completely ignore what page you are on and returns results for the whole set....which is exactly not what any of my end users expect to happen....
Scott

Right click on a link and selecting "open in new window" does not work. How do I gewt this feature to work? PS Right click on a link and selecting open in new tab does.

No matter where the link is - in an e-mail or on a web page - the "Open in new window" feature does not work. Very annoying. Also I close Firefox in a session, but then cannot re-open it. When I shut my PC down I get a prompt to End Task -[ Firefox ] and a window opens asking if I want to save tabs and quit; quit; or cancel. After closing Firefox it does not show as an application running in Task Manager
== This happened ==
Every time Firefox opened
== I recently re-installed Firefox.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Select Preferred Vendor in Describe Requirement not working

Similar Messages

Maybe you are looking for