Select Query with Inner Join
Dear Experts,
I have writen a inner join code with MKPF and MSEG which taking too much time, while I have used index.
Indexes are:
MSEG
MATNR
WERKS
LGORT
BWART
SOBKZ
MKPF
BUDAT
MBLNR
My Select Query is :
SELECT B~MATNR
B~MAT_KDAUF
B~MAT_KDPOS
B~BWART
B~MENGE
B~MEINS
B~AUFNR
INTO TABLE IT_MSEG
FROM MKPF AS A
INNER JOIN MSEG AS B
ON AMBLNR EQ BMBLNR
AND AMJAHR EQ BMJAHR
WHERE A~BUDAT IN BUDAT
AND B~MATNR IN MATNR
AND B~WERKS IN WERKS
AND B~LGORT IN LGORT
AND B~BWART IN BWART.
hi,
you can use for all entries it will work faster then joins
About it:*
FOR ALL ENTRIES WHERE
Syntax
... FOR ALL ENTRIES IN itab WHERE ... col operator itab-comp ...
Effect
If the addition FOR ALL ENTRIES is specified before the language element WHERE, then the components comp of the internal table itab can be used as operands when comparing with relational operators.
The internal table itab must have a structured line type and the component comp must be compatible with the column col.
The logical expression sql_cond of the WHERE condition can comprise various logical expressions by using AND and OR. However, if FOR ALL ENTRIES is specified, there must be at least one Comparison with a column of the internal table itab, which can be specified either statistically or dynamically (Release 6.40 and higher). In a statement with a SELECTstatement with FOR ALL ENTRIES, the addition ORDER BY can only be used with the addition PRIMARY KEY.
The whole logical expression sql_cond is evaluated for each individual line of the internal table itab. The resulting set of the SELECT statement is the union of the resulting sets from the individual evaluations. Duplicate lines are automatically removed from the resulting set. If the internal table itab is empty, the whole WHERE statement is ignored and all lines in the database are put in the resulting set.
Notes
In Release 6.10 and higher, the same internal table can be specified after FOR ALL ENTRIES and after INTO.
The addition FOR ALL ENTRIES is only possible before WHERE conditions of the SELECT statement.
Example
Exporting all flight data for a specified departure city. The relevant airlines and flight numbers are first put in an internal table entry_tab, which is evaluated in the WHERE condition of the subsquent SELECT statement.
PARAMETERS p_city TYPE spfli-cityfrom.
TYPES: BEGIN OF entry_tab_type,
carrid TYPE spfli-carrid,
connid TYPE spfli-connid,
END OF entry_tab_type.
DATA: entry_tab TYPE TABLE OF entry_tab_type,
sflight_tab TYPE SORTED TABLE OF sflight
WITH UNIQUE KEY carrid connid fldate.
SELECT carrid connid
FROM spfli
INTO CORRESPONDING FIELDS OF TABLE entry_tab
WHERE cityfrom = p_city.
SELECT carrid connid fldate
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE sflight_tab
FOR ALL ENTRIES IN entry_tab
WHERE carrid = entry_tab-carrid AND
connid = entry_tab-connid.
hope it will help you
Rahul sharma
Edited by: RAHUL SHARMA on Sep 11, 2008 8:10 AM
Similar Messages
-
How to re-write this big SELECT Query with INNER JOINs?
Hi Experts
I have a performance killer SELECT query with an inner join of 3 tables u2013 VBAP, VBAK and VBEP together, which populates records to an internal table INT_COLL_ORD. Based on these records selected, in another SELECT query, records are fetched from VBUK table to the internal table INT_VBUK.
SELECT A~VBELN A~POSNR A~MATNR A~KWMENG A~KBMENG A~ERDAT A~ERZET A~PSTYV D~AUART E~ETTYP E~EDATU
INTO TABLE INT_TAB_RES
FROM VBAP AS A INNER JOIN VBAK AS D
ON D~VBELN EQ A~VBELN AND D~MANDT EQ A~MANDT
INNER JOIN VBEP AS E
ON E~VBELN EQ A~VBELN AND E~POSNR EQ A~POSNR AND E~MANDT EQ A~MANDT
WHERE A~VBELN IN s_VBELN AND
D~auart in s_auart AND
D~vkorg in s_vkorg AND
D~vbtyp eq 'C' AND
( ( matnr LIKE c_prefix_sp AND zz_msposnr NE 0 AND kbmeng EQ 0 )
OR ( matnr LIKE c_prefix_fp AND kwmeng NE A~kbmeng ) ) AND
A~ABGRU EQ SPACE AND
A~MTVFP IN R_MTVFP AND
A~PRCTR IN R_PRCT AND
E~ETENR EQ '1'.
SORT INT_COLL_ORD BY VBELN POSNR ETTYP.
DELETE ADJACENT DUPLICATES FROM INT_TAB_RES COMPARING VBELN POSNR.
CHECK NOT INT_TAB_RES [] IS INITIAL.
SELECT VBELN UVALL CMGST INTO TABLE INT_VBUK
FROM VBUK FOR ALL ENTRIES IN INT_TAB_RES
WHERE VBELN = INT_TAB_RES-VBELN AND UVALL NE 'A'.
Now, the requirement is:
I want to split this query. Like, first join VBAK and VBUK first. With this selection, go to the inner join of VBAP and VBEP (on key VBELN) to get the results. How can I re-write this Query?
Please help.
Thx n RgdsHi Nagraj
As of your suggestion, I have re-written the query as below:
* Declarations
TYPES: BEGIN OF TYP_COLL_ORD,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBUP-POSNR,
MATNR LIKE VBAP-MATNR,
KWMENG LIKE VBAP-KWMENG,
KBMENG LIKE VBAP-KBMENG,
ERDAT LIKE VBAK-ERDAT,
ERZET LIKE VBAK-ERZET,
PSTYV LIKE VBAP-PSTYV,
AUART LIKE VBAK-AUART, u201Calready exists in type
ETTYP LIKE VBEP-ETTYP,
EDATU LIKE VBEP-EDATU.
TYPES: END OF TYP_COLL_ORD.
DATA: INT_COLL_ORD TYPE TABLE OF TYP_COLL_ORD WITH HEADER LINE.
TYPES: BEGIN OF TYP_VBUK,
AUART LIKE VBAK-AUART, u201Chave added this field
VBELN LIKE VBUK-VBELN,
UVALL LIKE VBUK-UVALL,
CMGST LIKE VBUK-CMGST.
TYPES: END OF TYP_VBUK.
DATA: INT_VBUK TYPE TABLE OF TYP_VBUK WITH HEADER LINE.
*QUERY#1 u2013 for VBAK & VBUK Join
SELECT A~AUART B~VBELN B~UVALL B~CMGST
INTO TABLE INT_VBUK
FROM VBAK AS A INNER JOIN VBUK AS B
ON A~VBELN EQ B~VBELN
WHERE A~VBELN IN s_VBELN AND
A~auart in s_auart AND
A~vkorg in s_vkorg AND
A~vbtyp eq 'C' AND
B~UVALL NE 'A'.
IF NOT INT_VBUK[] IS INITIAL.
SORT INT_VBUK BY VBELN.
DELETE ADJACENT DUPLICATES FROM INT_VBUK COMPARING VBELN.
*QUERY#2 u2013 for VBAP & VBEP Join
SELECT A~VBELN A~POSNR A~MATNR A~KWMENG A~KBMENG A~ERDAT A~ERZET A~PSTYV B~ETTYP B~EDATU
INTO TABLE INT_COLL_ORD
FROM VBAP AS A INNER JOIN VBEP AS B
ON B~VBELN EQ A~VBELN AND B~POSNR EQ A~POSNR AND B~MANDT EQ A~MANDT
FOR ALL ENTRIES IN INT_VBUK
WHERE A~VBELN = INT_VBUK-VBELN AND
( ( matnr LIKE c_prefix_sp AND zz_msposnr NE 0 AND kbmeng EQ 0 )
OR ( matnr LIKE c_prefix_fp AND kwmeng NE A~kbmeng ) ) AND
A~ABGRU EQ SPACE AND
A~MTVFP IN R_MTVFP AND
A~PRCTR IN R_PRCT AND
B~ETENR EQ '1'.
ENDIF.
SORT INT_COLL_ORD BY VBELN POSNR ETTYP.
DELETE ADJACENT DUPLICATES FROM INT_COLL_ORD
COMPARING VBELN POSNR.
CHECK NOT INT_COLL_ORD[] IS INITIAL.
LOOP AT INT_COLL_ORD.
CLEAR: L_MTART,L_ATPPR,L_ETTYP.
IF L_PREVIOUS_ETTYP NE INT_COLL_ORD-ETTYP OR
L_PREVIOUS_AUART NE INT_COLL_ORD-AUART.
READ TABLE INT_OVRCTL WITH KEY AUART = INT_COLL_ORD-AUART ETTYP = INT_COLL_ORD-ETTYP.
CHECK SY-SUBRC NE 0.
Now, the issue is:
Please note that declaration for INT_COLL_ORD has a field AUART, which is used in further parts of program (see the statement just above)
But, since neither VBAP nor VBEP contains AUART field, it cannot be fetched through the QUERY#2. So this value is not populated into INT_COLL_ORD through SELECT Query.
Since this field is used in later part of program & that the internal table has no value for this field, it dumps!!
How to include this value into the INT_COLL_ORD?
Plz suggest.... -
Absolute dynamic select query with dynamic join and where
Has anyone ever tried creating an absolutely dynamic SELECT query with dynamic Join and Where conditions.
I have a requirement of creating such a query in an Utility Class, and i have written the code. But its throwing my sysntax errors.
Please let me know where am I going wrong OR is it really possible to create such a dynamic Query??
SELECT (FIELDS) INTO TABLE IT_TABLES
FROM ( (ME->TABLE1) inner join ( me->table2 )
on ( on_condition ) )
WHERE (me->where_fields).
Ags.It worked for me in a following way:
select * into corresponding fields of table <result_table>
from (join_string)
where (l_where).
Where the contents of join_string were dynamically build using concatenation. So it will be something like
concatenate ME->TABLE1 'as a INNER JOIN' me->table2 'as b ON (' into join_string separated by space.
<...>
add here matching/reference colums, something like
concatenate 'a~' me->TABLE1_JOIN_COL into temp1.
concatenate 'b~' me->TABLE2_JOIN_COL into temp2.
concatenate join_string temp1 '=' temp2 into join_string separated by space.
<...>
concatenate join_string ')' into join_string separated by space.
And then use similar approach for l_where variable. -
Trying to convert SELECT query to Update query with INNER JOINS
Assalam O Alaikum!
I've tried to convert this query of mine but failed.
I wish to use it for update datasource in data GridView. I'm fetching data with it but converting it to update is not helping giving multiple errors.
I tried to share the pic but they don't let me do so. Its actually a gridView with check boxes. check the item and update it..
Here is the query. Please help me with that.
<pre>
SELECT [rightsId], [saveRights], [updateRights],
[viewRights], [deleteRights], [printRights],
[processRights], [verifyRights], [unProcessRights],
[unVerifyRights], CONVERT(VARCHAR(100),tblGroup.groupId)as groupId, convert(varchar(100),tblmenu.[menuId])as menuid
FROM [tblRights] inner join tblMenu ON
tblMenu.menuId=tblRights.menuId INNER JOIN
tblGroup ON tblGroup.groupId=tblRights.rightsId
</pre>code is fine the above query works fine with the fetching(select) but when I try to write it with update it doesn't. Here is the asp code. I'm doing nothing with c# or vb.
<asp:GridView ID="GridView1" runat="server" AllowPaging="True"
DataSourceID="ratGrid" AutoGenerateColumns="False"
CssClass="GridViewStyle" Width="100%" AllowSorting="True" AutoGenerateEditButton="True" BackColor="#DEBA84" BorderColor="#DEBA84" BorderStyle="None" BorderWidth="1px" CellPadding="3" CellSpacing="2">
<Columns>
<asp:BoundField DataField="rightsId" HeaderText="rightsId" ItemStyle-Width="75px" SortExpression="rightsId" Visible="False">
<ItemStyle Width="75px" />
</asp:BoundField>
<asp:CheckBoxField DataField="saveRights" HeaderText="Save" SortExpression="saveRights" />
<asp:CheckBoxField DataField="updateRights" HeaderText="Update" SortExpression="updateRights" />
<asp:CheckBoxField DataField="viewRights" HeaderText="View" SortExpression="viewRights" />
<asp:CheckBoxField DataField="deleteRights" HeaderText="Delete" SortExpression="deleteRights" />
<asp:CheckBoxField DataField="printRights" HeaderText="Print" SortExpression="printRights" />
<asp:CheckBoxField DataField="processRights" HeaderText="Process" SortExpression="processRights" />
<asp:CheckBoxField DataField="verifyRights" HeaderText="Verify" SortExpression="verifyRights" />
<asp:CheckBoxField DataField="unProcessRights" HeaderText="UnProcess" SortExpression="unProcessRights" />
<asp:CheckBoxField DataField="unVerifyRights" HeaderText="UnVerify" SortExpression="unVerifyRights" />
<asp:BoundField DataField="groupId" HeaderText="groupId" ReadOnly="True" SortExpression="groupId" Visible="False" />
<asp:BoundField DataField="menuid" HeaderText="menuid" SortExpression="menuid" ReadOnly="True" Visible="False" />
</Columns>
<RowStyle CssClass="RowStyle" BackColor="#FFF7E7" ForeColor="#8C4510" />
<PagerStyle CssClass="PagerStyle" ForeColor="#8C4510" HorizontalAlign="Center" />
<SelectedRowStyle CssClass="SelectedRowStyle" BackColor="#738A9C" Font-Bold="True" ForeColor="White" />
<FooterStyle BackColor="#F7DFB5" ForeColor="#8C4510" />
<HeaderStyle CssClass="HeaderStyle" BackColor="#A55129" Font-Bold="True" ForeColor="White" />
<AlternatingRowStyle CssClass="AltRowStyle" />
<SortedAscendingCellStyle BackColor="#FFF1D4" />
<SortedAscendingHeaderStyle BackColor="#B95C30" />
<SortedDescendingCellStyle BackColor="#F1E5CE" />
<SortedDescendingHeaderStyle BackColor="#93451F" />
</asp:GridView>
<asp:SqlDataSource ID="ratGrid"
runat="server"
ConnectionString="<%$ ConnectionStrings:Conn_Str %>"
SelectCommand="SELECT [rightsId], [saveRights], [updateRights],
[viewRights], [deleteRights], [printRights],
[processRights], [verifyRights], [unProcessRights],
[unVerifyRights], CONVERT(VARCHAR(100),tblGroup.groupId)as groupId, convert(varchar(100),tblmenu.[menuId])as menuid
FROM [tblRights] inner join tblMenu ON
tblMenu.menuId=tblRights.menuId INNER JOIN
tblGroup ON tblGroup.groupId=tblRights.rightsId"
FilterExpression="menuId like '{0}%' and [groupId] like '{1}%'" >
<FilterParameters>
<asp:ControlParameter ControlID="ddlmenu" Name="menu"
PropertyName="SelectedValue" Type="String" />
<asp:ControlParameter ControlID="ddlgroup" Name="Country"
PropertyName="SelectedValue" Type="String" />
</FilterParameters>
</asp:SqlDataSource>
Your table needs key(s) and you need to assign the key as DataKeys property for the GridView to make your UpDate and Delete work without coding. -
table
can any please modify the query
thanking in advance
BEGIN OF t_initord OCCURS 0,
vbeln LIKE vbak-vbeln, " Sales Order
posnr LIKE vbap-posnr, " Sales Order Line Item
auart LIKE vbak-auart, " Sales Order Type
bezei LIKE tvakt-bezei, " Sales Order Type Text
billdo Like vbrk-vbeln, "billing document number
matnr LIKE vbfa-matnr, " Material
maktx LIKE makt-maktx, " Material Description
bstnk LIKE vbak-bstnk, " Customer PO number
bukrs LIKE vbak-bukrs_vf, " Company Code..
vkorg LIKE vbak-vkorg, " Sales Org
vtweg LIKE vbak-vtweg, " Distribution Channel
spart LIKE vbak-spart, " Division
vkgrp LIKE vbak-vkgrp, " Sales Group
augru LIKE vbak-augru, " Order Reason
abgru LIKE vbap-abgru, " Reson for rejection
kwmeng LIKE vbap-kwmeng, " Order Line quantit
deliv LIKE likp-vbeln, " Delivery Number
delit LIKE lips-posnr, " Delivery Number
rfmng LIKE vbfa-rfmng, " Delivery Qty..
vbtyp_n LIKE vbfa-vbtyp_n, " R12 Defect 8938.
mrnkz LIKE vbkd-mrnkz, " Subsequent Invoicing
docurr LIKE vbak-waerk, " Document Currency
netwr LIKE vbap-netwr, " Line Item Amt in Doc curr
ocdate LIKE vbak-aedat, " Order change date
objnr LIKE vbap-objnr, " Object number
rad LIKE sy-datum, " Requested Arrival Date
submi LIKE ekko-submi, " Collective number
plant1 LIKE vbap-werks, " Supplying Plant
ernam LIKE vbak-ernam, " Order Created by
erdat LIKE vbak-erdat, " Order Created on
lifnr LIKE ekko-lifnr, " Vendor
soldto LIKE vbak-kunnr, " Sold-to Party
shipto LIKE vbak-kunnr, " Ship-to Party
etenr LIKE vbep-etenr, " Sales Order schedule line
bmeng LIKE vbep-bmeng, " Order Sch Line quantity
vrkme LIKE vbap-zieme, " Sales Order UOM
cad LIKE sy-datum, " Confirmed Arrival Date
ktokk LIKE lfa1-ktokk, " Vendor account group
docurramt LIKE vbap-netwr, " Document Currency Amount
locurr LIKE vbak-waerk, " Local Currency
locurramt LIKE vbap-netwr, " Local Currency Amount
werks1 LIKE vbap-werks, " Supplying Plant
werks_name1 LIKE t001w-name1, " Plant description
lifnr_name1 LIKE lfa1-name1, " Name of the Vendor
stat TYPE g_stat_typ, " Status Code
lstatus TYPE g_stext_typ, " Last Status
soappr TYPE tj30t-txt30, " Sales Order Approval
bdnum LIKE vbfa-vbeln, " Billing doc number
bdlin LIKE vbrp-posnr, " Billing Item
uecha_b LIKE vbrp-uecha, " Item of Batch split
uecha_d LIKE lips-uecha, " Item of Batch split
END OF t_initord.
This is the internal table
to get the details wrote a select query
can any one please correct the select query
SELECT t1vbeln t2posnr t1auart t4bezei
t2matnr t5maktx
t1bstnk t1bukrs_vf t1vkorg t1vtweg t1spart t1vkgrp
t1augru t2abgru t2kwmeng t8vbeln
t8posnn t8rfmng t8vbtyp_n t7mrnkz t2waerk t2netwr
t1aedat t1objnr t1vdatu t1submi t2werks t1ernam t1~erdat
t6lifnr t1kunnr t9~kunnr
INTO TABLE t_initord
FROM vbak AS t1
INNER JOIN vbap AS t2
ON t1vbeln EQ t2vbeln
LEFT OUTER JOIN tvakt AS t4
ON t1auart EQ t4auart
AND t4~spras EQ c_en
LEFT OUTER JOIN makt AS t5
ON t2matnr EQ t5matnr
AND t5~spras EQ c_en
LEFT OUTER JOIN vbpa AS t9
ON t1vbeln EQ t9vbeln
AND t9~parvw EQ c_we
LEFT OUTER JOIN ekko AS t6
ON t1submi EQ t6ebeln
LEFT OUTER JOIN vbkd AS t7
ON t1vbeln EQ t7vbeln AND
t7~posnr EQ c_initposnr
LEFT OUTER JOIN vbfa AS t8
ON t2vbeln EQ t8vbelv AND
t2posnr EQ t8posnv
WHERE t1~vbeln IN s_slord
AND t1~vkbur IN s_sloff
AND t1~vkgrp IN s_slgrp
AND t1~kunnr IN s_custag
AND t1~auart IN s_ortyp
AND t1~vkorg IN s_slorg
AND t1~vtweg IN s_disch
AND t1~spart IN s_divi
AND t1~erdat IN s_date
AND t1~bukrs_vf IN s_ccode
AND t2~ernam IN s_slcre.
i need to modify the above query to get the additional information into the above table
billing doument number
document currency
document currency amount
billed quantity
sold to country
ship to countryYou can also refer to this code... for making your code better..
SELECT MATNR
WERKS
DISMM
DISPO
BESKZ INTO TABLE I_MARC FROM MARC
WHERE WERKS IN S_WERKS AND BESKZ = 'F' AND DISMM <> 'ND'.
IF NOT I_MARC IS INITIAL.
SELECT MATNR
MAKTX INTO TABLE I_MAKT FROM MAKT
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR.
ENDIF.
REFRESH I_MDPS.
REFRESH I_MDEZ.
REFRESH I_MT61D.
REFRESH I_MDPS2.
REFRESH I_MDEZ2.
LOOP AT I_MARC INTO WA_MARC.
CALL FUNCTION 'MD_STOCK_REQUIREMENTS_LIST_API'
EXPORTING
MATNR = WA_MARC-MATNR
WERKS = WA_MARC-WERKS
TABLES
MDEZX = I_MDEZ
EXCEPTIONS
MATERIAL_PLANT_NOT_FOUND = 1
PLANT_NOT_FOUND = 2
OTHERS = 3
LOOP AT I_MDEZ.
I_MDEZ2-MATNR = WA_MARC-MATNR.
I_MDEZ2-WERKS = WA_MARC-WERKS.
MOVE-CORRESPONDING I_MDEZ TO I_MDEZ2.
APPEND I_MDEZ2.
ENDLOOP.
CLEAR I_MDEZ.
CLEAR I_MDEZ2.
ENDLOOP.
Deleting teh records from the internal table which are
nither purchase order nor purchase requisition.
if pur_ord = 'X' and Pur_req = 'X'.
delete i_mdez2 where delkz <> 'BA' and delkz <> 'BE'.
endif.
if pur_ord = 'X' and Pur_req <> 'X'.
delete i_mdez2 where delkz <> 'BE'.
endif.
if pur_req = 'X' and pur_ord <> 'X'.
delete i_mdez2 where delkz <> 'BA'.
endif.
Populating the final internal table to be displayed.
Sort i_mdez2 by matnr werks.
SORT I_MAKT BY MATNR.
LOOP AT I_MDEZ2 WHERE LIFNR IN S_LIFNR.
wa_final-werks = i_mdez2-werks.
WA_FINAL-LIFNR = I_MDEZ2-LIFNR.
WA_FINAL-EXTRA = I_MDEZ2-EXTRA.
WA_FINAL-MNG01 = I_MDEZ2-MNG01.
WA_FINAL-AUSKT = I_MDEZ2-AUSKT.
WA_FINAL-UMDAT = I_MDEZ2-UMDAT.
WA_FINAL-WERKS = I_MDEZ2-WERKS.
WA_FINAL-MATNR = I_MDEZ2-MATNR.
wa_final-delkz = i_mdez2-delkz.
For Message to be displayed with the Purchase Order and Purchase Requisition.
PERFORM TEXT_EXCEPTION.
READ TABLE I_MAKT INTO WA_MAKT WITH KEY MATNR = WA_FINAL-MATNR BINARY SEARCH.
IF SY-SUBRC = 0.
WA_FINAL-MAKTX = WA_MAKT-MAKTX.
ENDIF.
APPEND WA_FINAL TO I_FINAL .
ENDLOOP.
IF SY-SUBRC <> 0.
MESSAGE I058.
leave program.
ENDIF.
Selecting the Purchase Organisation from the EKKO table.
if not i_final is initial.
SELECT EBELN EKORG LIFNR INTO TABLE I_EKKO FROM EKKO
FOR ALL ENTRIES IN I_FINAL
WHERE LIFNR = I_FINAL-LIFNR.
Selecting the name of the vendor from the LFA1 table.
select lifnr name1 into table i_lfa1 from lfa1
for all entries in i_final
where lifnr = i_final-lifnr.
Selecting the current date from the eban table.
select matnr lfdat into table i_eban from eban
for all entries in i_final
where matnr = i_final-matnr." and bnfpo = i_ekpo-bnfpo.
endif.
if not i_ekko is initial.
Selecting the Unit Price from EKPO for finding the Extended amount.
SELECT EBELN ebelp NETPR MATNR banfn bnfpo INTO TABLE I_EKPO FROM EKPO
FOR ALL ENTRIES IN I_EKKO
WHERE EBELN = I_EKKO-EBELN.
endif.
if not i_ekpo is initial.
Selecting the current date from the Eket table.
select ebeln ebelp eindt into table i_eket from eket
for all entries in i_ekpo
where ebeln = i_ekpo-ebeln and ebelp = i_ekpo-ebelp.
endif.
*Sorting the internal tables.
SORT I_EKKO BY LIFNR.
sort i_lfa1 by lifnr.
SORT I_EKPO BY MATNR.
sort i_eket by ebeln ebelp.
sort i_eban by matnr.
LOOP AT I_FINAL INTO WA_FINAL.
READ TABLE I_EKKO INTO WA_EKKO WITH KEY LIFNR = WA_FINAL-LIFNR.
WA_FINAL-EKORG = WA_EKKO-EKORG.
wa_final-ebeln = wa_ekko-ebeln.
read table i_lfa1 into wa_lfa1 with key lifnr = wa_final-lifnr.
wa_final-name1 = wa_lfa1-name1.
READ TABLE I_EKPO INTO WA_EKPO WITH KEY MATNR = WA_FINAL-MATNR.
wa_final-ebelp = wa_ekpo-ebelp.
WA_FINAL-NETPR = WA_EKPO-NETPR.
if wa_final-delkz = 'BA'.
read table i_eban into wa_eban with key matnr = wa_final-matnr.
wa_final-dat00 = wa_eban-lfdat.
endif.
if wa_final-delkz = 'BE'.
read table i_eket into wa_eket with key ebeln = wa_final-ebeln ebelp = wa_final-ebelp.
wa_final-dat00 = wa_eket-eindt.
endif.
WA_FINAL-EXTND_AMOUNT = WA_FINAL-MNG01 * WA_FINAL-NETPR.
MODIFY I_FINAL FROM WA_FINAL TRANSPORTING EKORG name1 dat00 EXTND_AMOUNT.
ENDLOOP.
In this I have taken many internal tables... according to the database table I am extracting from .. then I am bringing all the record in the final internal table which will be containing teh records from all the internal table that i have used..
Regards,
Jayant
<b>Please award if helpful</b> -
Hi all,
give me the query with innerjoin
Based on the input values of Material number (MARC-MATNR) from selection screen check and get the Special Procurement type details from MARC-SOBSL and Material description details from MAKT-MAKTX.
basha....
Moderator message - instead of asking, you should try to write the code yourself and get back to the forum if you have a specific question.
Edited by: Rob Burbank on Apr 19, 2009 4:46 PMHi,
Please Test the following Sample Code it is according to your requirement hope will solve out your problem,
TABLES: marc.
SELECt-OPTIONS somatnr for marc-matnr.
TYPES: BEGIN OF ty_matnr,
matnr LIKE marc-matnr,
sobsl LIKE marc-sobsl,
maktx LIKE makt-maktx,
END OF ty_matnr.
DATA: it_matnr TYPE STANDARD TABLE OF ty_matnr WITH HEADER LINE.
SELECT marc~matnr marc~sobsl makt~maktx
into CORRESPONDING FIELDS OF TABLE it_matnr
from marc INNER JOIN makt on ( marc~matnr eq makt~matnr )
WHERE marc~matnr in somatnr.
Best Regards,
Faisal -
Issue when suming the field in Select query using inner join
Hi All,
SELECT A~OI_SHNUM
A~FORWAGENT
A~ROUTE
A~SHTYP
A~DTSHP_EACT
A~/BIC/GTCLICENS
A~/BIC/GTCADD04
A~COMP_CODE
SUM( C~GRS_WGT_DL )
C~UNIT_OF_WT
INTO TABLE I_LAYONE
FROM ( ( /BIC/ANTCD000200 AS A
INNER JOIN /BIC/AGSSD000700 AS B ON BOI_SHNUM = AOI_SHNUM )
INNER JOIN /BIC/AGSSD000600 AS C ON CDELIV_NUMB = BDELIV_NUMB ).
I need to sum the field C~GRS_WGT_DL
While compiling it show the error given below
The field "C~UNIT_OF_WT" from the SELECT list is is missing in the
GROUP BY clause. is missing in the GROUP BY clause. is missing in the
GROUP BY clause. is missing in the GROUP BY clause. is missing in the
GROUP BY clause. is "C~UNIT_OF_W
with regards,
ThambeHi,
Try the following SQL statement. Hope it helps you.
SELECT A~OI_SHNUM
A~FORWAGENT
A~ROUTE
A~SHTYP
A~DTSHP_EACT
A~/BIC/GTCLICENS
A~/BIC/GTCADD04
A~COMP_CODE
SUM( C~GRS_WGT_DL )
C~UNIT_OF_WT
INTO TABLE I_LAYONE
FROM ( ( /BIC/ANTCD000200 AS A
INNER JOIN /BIC/AGSSD000700 AS B ON BOI_SHNUM = AOI_SHNUM )
INNER JOIN /BIC/AGSSD000600 AS C ON CDELIV_NUMB = BDELIV_NUMB )
GROUP BY
A~OI_SHNUM
A~FORWAGENT
A~ROUTE
A~SHTYP
A~DTSHP_EACT
A~/BIC/GTCLICENS
A~/BIC/GTCADD04
A~COMP_CODE.
Murthy. -
Syntax errors in update query with inner joins and sub query.
Below is the query:
UPDATE sp_CFQ_Coord_Corrections
INNER JOIN (CFQ_Coord_Corrections
INNER JOIN CFQ_Referrals ON CFQ_Coord_Corrections.CorrID = CFQ_Referrals.RecID)
ON sp_CFQ_Coord_Corrections.ID = CFQ_Referrals.RecID
SET CFQ_Coord_Corrections.MatchFound = 1,
CFQ_Coord_Corrections.RecTblID = [CFQ_Referrals].[RecTblID],
sp_CFQ_Coord_Corrections.MatchFound = 1
WHERE (((CFQ_Coord_Corrections.MatchFound)=0)
AND ((sp_CFQ_Coord_Corrections.MatchFound)=0)
AND ((CFQ_Coord_Corrections.RecImported)=1)
AND ((CFQ_Referrals.RecFileName)='COORDCORR_SPOINT')
AND ((CFQ_Referrals.RecCombKey)='No.Match')
AND ((sp_CFQ_Coord_Corrections.RecImported)=1));
Error messages seen when executed:
Msg 156, Level 15, State 1, Line 3
Incorrect syntax near the keyword 'INNER'.
Msg 102, Level 15, State 1, Line 10
Incorrect syntax near 'CFQ_Coord_Corrections'.
Please help.....Below is the query:
UPDATE sp_CFQ_Coord_Corrections
INNER JOIN (CFQ_Coord_Corrections
INNER JOIN CFQ_Referrals ON CFQ_Coord_Corrections.CorrID = CFQ_Referrals.RecID)
ON sp_CFQ_Coord_Corrections.ID = CFQ_Referrals.RecID
SET CFQ_Coord_Corrections.MatchFound = 1,
CFQ_Coord_Corrections.RecTblID = [CFQ_Referrals].[RecTblID],
sp_CFQ_Coord_Corrections.MatchFound = 1
WHERE (((CFQ_Coord_Corrections.MatchFound)=0)
AND ((sp_CFQ_Coord_Corrections.MatchFound)=0)
AND ((CFQ_Coord_Corrections.RecImported)=1)
AND ((CFQ_Referrals.RecFileName)='COORDCORR_SPOINT')
AND ((CFQ_Referrals.RecCombKey)='No.Match')
AND ((sp_CFQ_Coord_Corrections.RecImported)=1));
Error messages seen when executed:
Msg 156, Level 15, State 1, Line 3
Incorrect syntax near the keyword 'INNER'.
Msg 102, Level 15, State 1, Line 10
Incorrect syntax near 'CFQ_Coord_Corrections'.
Please help.....
sp_CFQ_Coord_Corrections is a table and not a stored procedure.
are these both tables "sp_CFQ_Coord_Corrections" and "CFQ_Coord_Corrections" different ?? -
Hi
How can we optimize instead of inner joins. or any other idea to improve it.
Thanks in advance!
Regards,
LKRaoWhat is 'it'?
Read {message:id=9360002} and {message:id=9360003} , and adjust your post accordingly.
Without a query, execution plan, database version, index information, etc. etc., I wouldn't know how to be of any help here...perhaps other volunteers have a crystal ball, but I forgot mine accidentally this morning... -
Dear Experts,
Update Employee set desicode = o.dcod from employee e inner join operator o on
e.employee_id = o.employe_id
waiting for suggestions,The other thread from yesterday that Satyaki mentioned Update.
William:
The SQL Server syntax from the OP is their version of an updateable join view. One interesting quirk of the implementation is that it does not require a unique key in the joined table, and will not error even if there are multiple rows that could update a row in the main table. I am still trying to figure out how it decides which row to use for the update, or if it actually updates multiple times and last update wins.
John -
hi friends,
can we use where clause in select statement with inner join.
i am using following code which gives error (The column name "WERKS" has two meanings . .).
SELECT AMATNR ACHARG AERSDA BMENGE B~MEINS
FROM MCHA AS A INNER JOIN CHVW AS B
ON ACHARG = BCHARG
INTO TABLE T_OUTPUT1
WHERE WERKS = PLANT AND CHARG = P_CHARG.
thanks.Yes u can use where clause in select statement with inner join.
SELECT AMATNR ACHARG AERSDA BMENGE B~MEINS
FROM MCHA AS A INNER JOIN CHVW AS B
ON ACHARG = BCHARG
INTO TABLE T_OUTPUT1
WHERE WERKS = PLANT AND CHARG = P_CHARG.
" mention the table name in where condition also like awerks or bwerks.
egards
Rajendra -
Help with Inner Join query in SQL
Hope someone can help with this, as this is quite an involved project for me, and I'm just about there with it.
My table structure is :
table_packages
packageID
package
packageDetails
etc
table_destinations
destinationID
destination
destinationDetails
etc
table_packagedestinations
packageID
destinationID
..so nothing that complicated.
So the idea is that I can have a package details page which shows the details of the package, along any destinations linked to that package via the packagedestinations table.
So this is the last part really - to get the page to display the destinations, but I'm missing something along the way....
This is the PHP from the header, including my INNER JOIN query....
PHP Code:
<?php
$ParampackageID_WADApackages = "-1";
if (isset($_GET['packageID'])) {
$ParampackageID_WADApackages = (get_magic_quotes_gpc()) ? $_GET['packageID'] : addslashes($_GET['packageID']);
$ParamSessionpackageID_WADApackages = "-1";
if (isset($_SESSION['WADA_Insert_packages'])) {
$ParamSessionpackageID_WADApackages = (get_magic_quotes_gpc()) ? $_SESSION['WADA_Insert_packages'] : addslashes($_SESSION['WADA_Insert_packages']);
$ParampackageID2_WADApackages = "-1";
if (isset($_GET['packageID'])) {
$ParampackageID2_WADApackages = (get_magic_quotes_gpc()) ? $_GET['packageID'] : addslashes($_GET['packageID']);
mysql_select_db($database_connPackages, $connPackages);
$query_WADApackages = sprintf("SELECT packageID, package, costperpax, duration, baselocation, category, dateadded, agerange, hotel, educational_tours, field_trips, corporate_outings, plant_visits, budget_package, rollingtours, teambuilding, description, offer FROM packages WHERE packageID = %s OR ( -1= %s AND packageID= %s)", GetSQLValueString($ParampackageID_WADApackages, "int"),GetSQLValueString($ParampackageID2_WADApackages, "int"),GetSQLValueString($ParamSessionpackageID_WADApackages, "int"));
$WADApackages = mysql_query($query_WADApackages, $connPackages) or die(mysql_error());
$row_WADApackages = mysql_fetch_assoc($WADApackages);
$totalRows_WADApackages = mysql_num_rows($WADApackages);
$colname_educationalDestinations = "1";
if (isset($_GET['PackageID'])) {
$colname_educationalDestinations = (get_magic_quotes_gpc()) ? packageID : addslashes(packageID);
mysql_select_db($database_connPackages, $connPackages);
$query_educationalDestinations = sprintf("SELECT * FROM destinations INNER JOIN (packages INNER JOIN packagedestinations ON packages.packageID = packagedestinations.packageID) ON destinations.destinationID = packagedestinations.destinationID WHERE packages.packageID = %s ORDER BY destination ASC", GetSQLValueString($colname_educationalDestinations, "int"));
$educationalDestinations = mysql_query($query_educationalDestinations, $connPackages) or die(mysql_error());
$row_educationalDestinations = mysql_fetch_assoc($educationalDestinations);
$totalRows_educationalDestinations = mysql_num_rows($educationalDestinations);
?>
And where I'm trying to display the destinations themselves, I have :
<table>
<tr>
<td>Destinations :</td>
</tr>
<?php do { ?>
<tr>
<td><?php echo $row_educationalDestinations['destination']; ?></td>
</tr>
<?php } while ($row_educationalDestinations = mysql_fetch_assoc($educationalDestinations)); ?>
</table>
If anyone could have a quick look and help me out that would be much appreciated - not sure if its my SQL at the top, or the PHP in the page, but either way it would be good to get it working.
Thanks.First off, you need to get the database tables so that there is a relationship between them.
In fact, if there is a one to one relationship, then it may be better to store all of your information in one table such as
table_packages
packageID
package
packageDetails
destination
destinationDetails
etc
If there is a one to many relationship, then the following would be true
packages
packageID
package
packageDetails
etc
destinations
destinationID
packageID
destination
destinationDetails
etc
The above assumes that there are many destinations to one package with the relationship coloured orange.
Once you have the above correct you can apply your query as follows
SELECT *
FROM packages
INNER JOIN destinations
ON packages.packageID = destinations.packageID
WHERE packages.packageID = %s
ORDER BY destination ASC
The above query will show all packages with relevant destinations -
Performance problem with inner join
Hi
With this Query
SELECT *
FROM TABLE1
INNER JOIN TABLE2
ON TABLE1.Col1 = TABLE2.Col2 AND TABLE1.Col2 = TABLE2.Col2
WHERE TABLE1.Col3 = 'AB' AND
TABLE2.Col4 = 'ZZ';
TABLE1 have 6,000,000 of records
TABLE2 have 9,000,000 of records
when I run this query the result take 30 secs
If I change the Optimizer_mode for 'RULE'
the result take 4 secs
All statistics is ok
Primary Key exists for TABLE1 and TABLE2 base-on Col1 and Col2
And index on Table1.Col3,Table1.Col4
somebody can help me ?Analyze tables compute statistics
and analyze index compute statistics
I join explain plan
STATEMENT_ID TIMESTAMP REMARKS OPERATION OPTIONS OBJECT_NODE OBJECT_OWNER OBJECT_NAME OBJECT_INSTANCE OBJECT_TYPE OPTIMIZER SEARCH_COLUMNS ID PARENT_ID POSITION COST CARDINALITY BYTES
OTHER_TAG PARTITION_START PARTITION_STOP PARTITION_ID OTHER DISTRIBUTION CPU_COST IO_COST TEMP_SPACE
WithRule1 2004-01-19 16:28:43 SELECT STATEMENT RULE 0
WithRule1 2004-01-19 16:28:43 SORT AGGREGATE 1 0 1
WithRule1 2004-01-19 16:28:43 NESTED LOOPS 2 1 1
WithRule1 2004-01-19 16:28:43 TABLE ACCESS BY INDEX ROWID MICRODEV T088_INSC 1 ANALYZED 3 2 1
WithRule1 2004-01-19 16:28:43 INDEX RANGE SCAN MICRODEV IX4_T088_INSC NON-UNIQUE ANALYZED 2 4 3 1
WithRule1 2004-01-19 16:28:43 TABLE ACCESS BY INDEX ROWID MICRODEV T090_CPOS_DEM 2 ANALYZED 5 2 2
WithRule1 2004-01-19 16:28:43 INDEX UNIQUE SCAN MICRODEV PK_T090_CPOS_DEM UNIQUE ANALYZED 2 6 5 1
7 rows selected.
STATEMENT_ID TIMESTAMP REMARKS OPERATION OPTIONS OBJECT_NODE OBJECT_OWNER OBJECT_NAME OBJECT_INSTANCE OBJECT_TYPE OPTIMIZER SEARCH_COLUMNS ID PARENT_ID POSITION COST CARDINALITY BYTES
OTHER_TAG PARTITION_START PARTITION_STOP PARTITION_ID OTHER DISTRIBUTION CPU_COST IO_COST TEMP_SPACE
WithChoose1 2004-01-19 16:29:37 SELECT STATEMENT CHOOSE 0 21680 21680 1 40
21680
WithChoose1 2004-01-19 16:29:37 SORT AGGREGATE 1 0 1 1 40
WithChoose1 2004-01-19 16:29:37 HASH JOIN 2 1 1 21680 59050 2362000
21680 3875000
WithChoose1 2004-01-19 16:29:37 TABLE ACCESS BY INDEX ROWID MICRODEV T088_INSC 1 ANALYZED 3 2 1 7031 96727 2708356
7031
WithChoose1 2004-01-19 16:29:37 INDEX RANGE SCAN MICRODEV IX4_T088_INSC NON-UNIQUE ANALYZED 2 4 3 1 232 96727
232
WithChoose1 2004-01-19 16:29:37 TABLE ACCESS FULL MICRODEV T090_CPOS_DEM 2 ANALYZED 5 2 2 11224 5662693 67952316
11224
6 rows selected. -
SUBQUERY with INNER JOIN in ABAP
Hi Expert
How Can I write SUBQUERY with INNER JOIN in ABAP.
thanksThanks Sidhharth for your Respose
Actually I need data from VBAP, VBAK, VBUP, VBUK and VBKD with all functional validation satisfied for a sales order item data. The requirement is to report all item data with other information from table VBAK, VBUP, VBUK and VBKD in a corresponding record with ALL data in VBAP.
Your help is appriciated.
see the below query for reference
select alias_vbap~vbeln from vbap as
alias_vbap inner join vbak as alias_vbak
on alias_vbapvbeln eq alias_vbakvbeln
"and alias_vbak~bukrs_vf eq '2400'
inner join vbuk as alias_vbuk
on alias_vbukvbeln = alias_vbapvbeln
inner join vbup as alias_vbup
on alias_vbupvbeln = alias_vbapvbeln
and alias_vbupposnr = alias_vbapposnr
left OUTER join veda as alias_veda
on alias_vedavbeln = alias_vbapvbeln
and alias_vedavposn = alias_vbapposnr
left outer join vbkd as alias_vbkd
on alias_vbkdvbeln = alias_vbapvbeln
and alias_vbkdposnr = alias_vbapposnr -
Update statement with inner join issues
I have searched for the answer on this and not really 100%....so figured I would ask...be nice :)
what have I done wrong? Or am I just going about this the wrong way? I have looked at the oracle docs and I can't find an example showing me this. I do see where you SET values based on the select query results. I want to update the result of a query based on the join with static values....
UPDATE table.a
SET table.a_STATUS=9,table.a.INDEX = 'N'
WHERE (SELECT table.a INNER JOIN table.b ON (table.a.COMPANY = table.b.COMPANY) AND (table.a.PO_NUMBER =table.b.PO_NUMBER) AND (table.a.PO_RELEASE =table.b.PO_RELEASE) AND (table.a.PO_CODE =table.b.PO_CODE) AND (table.a_STATUS=1) AND (table.b.CLOSED_FL = 'Y'));Hi,
Welcome to the forum!
user11360811 wrote:
I have searched for the answer on this and not really 100%....so figured I would ask...be nice :)
what have I done wrong? Or am I just going about this the wrong way? I have looked at the oracle docs and I can't find an example showing me this. I do see where you SET values based on the select query results. I want to update the result of a query based on the join with static values....
UPDATE table.aThat's updating a table called A in a schema called TABLE (which is not a good name for any user-named object). Are those really your table and schema names? Perhaps you meant to have an underscore instead of a dot:
UPDATE table_ais much, much more reasonable. It means the table name is TABLE_A (a perfectly good name) in the current schema.
SET table.a_STATUS=9,table.a.INDEX = 'N'
WHERE ( ...There's a syntax error. You can't just say
"WHERE (sub-query)"; it has to be
"WHERE EXISTS (sub-suery)" or
"WHERE (sub-query) = some_value" or
"WHERE some_value IN (sub_query)", or something similar. WHERE can never be used without some kind of comparison operator, such as EXISTS, = or IN.
SELECT table.a INNER JOIN table.b ON ...Here are some more syntax errors. The correct syntax for any query is
SELECT column_list
FROM table_name ...If table.a is your (first) table name, then you're missing the list of columns to SELECT, and the mandatory keyword FROM.
(table.a.COMPANY = table.b.COMPANY) AND (table.a.PO_NUMBER =table.b.PO_NUMBER) AND (table.a.PO_RELEASE =table.b.PO_RELEASE) AND (table.a.PO_CODE =table.b.PO_CODE) AND (table.a_STATUS=1) AND (table.b.CLOSED_FL = 'Y'));Some general advice about UPDATE:
If it's not obvious how to use UPDATE to do what you want, then there's a good chance that UPDATE is the wrong tool for the job. MERGE might be much simpler, and more efficient as well. This is especially likely if you need to join the table that's being updated to some other table.
Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved. That way, the people who want to help you can re-create the problem and test their ideas.
Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
Simplify the problem as much as possible. Remove all tables and columns that play no role in this problem.
If you're asking about a DML statement, such as UPDATE, the CREATE TABLE and INSERT statements should re-create the tables as they are before the DML, and the results will be the contents of the changed table(s) when everything is finished.
Always say which version of Oracle you're using (for example, 11.2.0.2.0).
See the forum FAQ {message:id=9360002}
Edited by: Frank Kulash on Jan 17, 2013 4:58 PM
Maybe you are looking for
-
How do I deactivate a device that no longer exists?
If you no longer have access to a certain device because it's been destroyed, because the disk has died, because it has been reformatted, or because it for any other reason is completely unrecoverable, how can this device be deactivated? I'm asking m
-
Help me diagnose my slow Mac mini
Hi All, I bought my wife a Mac mini (2012) and all she does on it is email, web and chat (Google Hangouts, typically). She did all of this on her old 2007 iMac, but for some reason this new Mac mini is struggling hard. She will get the spinning beach
-
Problem in BDC with ( MM01-Dynamic views )
HI I am working with BDC on material Mater(mm01). Now while Creating Material,there is option of selecting different views based on MaterialType. But while recording a BDC i can record it for a particular Material Type.and can select view associated
-
How can I change the default alarm for events in ical?
-
HI ALL I WANT TO SEARCH BY DATE BY PRESSING THE BUTTON My Button code is Like that declare l_where varchar2(4000); begin if :search_type = 'ALL' then l_where := 'ENTER_DATE||REPLY like ''%'|| :serch_value ||'%''' ; else l_wher