Select statment & form block

Hi,
I have one issue here which is:
Oracle 10g
Suppose you have a select stament which contain
A lot of columns can i reflect this statment in form
Block and apply delete update insert action in this block
Regards,
Edited by: kingadmin on Aug 19, 2012 10:31 PM

Is this a onetime task? If so, i would
-create a database view
-create an INSTEAD-OF-trigger on the view
-base your block on the view.
It might be that you have to change the key-mode of the block to maybe "Non-Updateable" and that you have to create your own ON-LOCk-trigger.m(Depends on the complexity of the view)

Similar Messages

Dynamic field in select statment.

Hello,
I created a report in which i have two checkboxes in the selection screen. The first checkbox is for the option to bring or not, initial purchase requisitions (BANFN) from EKPO and the second is to bring initial or not, RFQs
(ANFNR). I want the select statment to have this form:
select ...
from ekpo
into g_table
where ..
and dynamic field = " ".
Can this be done ?
i tried to put it as a string but it didnt work. (data: dynamic field type string value "EKPO-BANFN")
P.S i know that it can be by writing the same select code twice.
I just wonder if this can be done by this way
\Regards.

Hey Nick,
I have more conditions than the one i said before , should all be in the lv_where_clause ?
check my code.
DATA: G_CHBFLD type STRING.
G_CHBFLD = 'P~BANFN = '' " '.
FORM SELECT_DATA_EKPO_EKKO.
SELECT .....
      FROM EKPO AS P INNER JOIN EKKO AS K
        ON PEBELN = KEBELN
          INTO CORRESPONDING FIELDS OF TABLE GT_EKPOEKKO
            WHERE K~EBELN IN S_EBELN
            AND K~AEDAT IN S_AEDAT
            AND K~BSTYP IN S_BSTYP
            and ( G_CHBFLD ) .   -
> //DEBUGER ")" is not a valid comparison operator. comparison operator.

How to get select statment in debug mode

hi all
i make debug in forms 10g and in debug mode and in a specified point , i want to see tha last select statment in debuger
thanks

in the debug-console, show globals and system-variables (second icon from the right), open the tab system and check the value of "last_query"

Distinct on a Forms' Block

Hi all,
I'm looking for an advice for the following problem:
I have to display two separate blocks: the first one is base table block(let's say CODE,DESCIPTION,QUANTITY with insert/delete/update functions) and another one (just to display data) with CODE,NR. The second block would correspond exactly to this statement: "SELECT CODE,COUNT(*) FROM first_block GROUP BY CODE;" (referencing the block cause I want to monitor what's going on the block and not on the db table).
Of course the issue is that I can't execute such a select, so I'm asking for an advice regarding some Forms' block/application property I'm not aware of and which can be useful for this task.
Any help will be very appreciated, thanks.
Marco

Hi Marco,
I'm not quite sure what you are trying to do as you don't say what the connection is between the first and second block.
Are you just trying to
1) display the number of records that forms could have retrieved in the first block based on the query criteria
2)trying to show a count of all records where block1.code = block2.code
3)Trying to show a count for all codes regardless of what records are in the first block
If 1 then create a non-base table item and populate it with the built in count_query
If 2 then create a non-base table item and populate it with a procedure to do a "select count(*) from table where :block1.code = table.code"
If 3 then create a view as "select code, count(*) from table" and then create a block on this view - if required you can then retrist this block to values in block1.
Hope this help (there nay wel be other better ways...)
Keith

Performace problem in a select statment how to imporve the performance

fist select statment
SELECT    a~extno
          a~guid_lclic       " for next select
          e~ctsim
          e~ctsex
*revised spec 3rd
          f~guid_pobj
          f~amnt_flt
          f~amcur
          f~guid_mobj
          e~srvll     "pk
          e~ctsty     "PK
          e~lgreg "PK
INTO TABLE gt_sagmeld
FROM /SAPSLL/LCLIC as a
INNER JOIN /sapsll/tlegsv as e on elgreg = algreg
* revised spec 3rd
inner join /sapsll/legcon as f on fguid_lclic = aguid_lclic   " for ccngn1 selection
inner join /sapsll/corcts as g on gguid_pobj = fguid_pobj
                           where   a~extno in s_extno.
sort gt_sagmeld by guid_lclic guid_pobj.
lgreg ctsty srvll
delete adjacent duplicates from gt_sagmeld comparing guid_lclic guid_pobj.
it selects about 20 lakh records
belos select statment whichs is taking time as it is based on the entreis of gt_sagmeld
select /sapsll/corpar~guid_mobj
            /sapsll/corpar~PAFCT
            but000~bpext
            but000~partner
            /sapsll/corpar~parno
            into table gt_but001
    from    /sapsll/corpar
    INNER join but000 on but000partner = /sapsll/corparparno
    for all entries in gt_sagmeld
    where /sapsll/corpar~guid_mobj = gt_sagmeld-guid_mobj
    and    /sapsll/corpar~PAFCT = 'SH'.
   SELECT /sapsll/cuit~guid_cuit         " PK
          /sapsll/cuit~QUANT_FLT         " to be displayed
          /sapsll/cuit~QUAUM             " to be displayed
          /sapsll/cuit~RPTDT             " to be displayed
         /sapsll/cuhd~guid_cuhd         " next select
          /sapsll/cuit~guid_pr           " next select
INTO table gt_sapsllcuit
FROM /sapsll/cuit
inner join /sapsll/cuhd on /sapsll/cuitguid_cuhd = /sapsll/cuhdguid_cuhd
FOR all entries in gt_sagmeld
WHERE /sapsll/cuit~guid_cuit = gt_sagmeld-guid_pobj.
Delete adjacent duplicates from gt_sapsllcuit[].
       if not gt_sapsllcuit[] is initial.

hi navenet
that didnt worked
we need to try ur range options
but not sure what you told in the last mail as not clear with range can u pls eloboragte more i am pasting the full code here
SELECT     a~extno
           a~guid_lclic       " for next select but000
           e~ctsim
           e~ctsex
           e~srvll
           e~ctsty
           e~lgreg
INTO TABLE gt_sagmeld
FROM /SAPSLL/LCLIC as a
INNER JOIN /sapsll/tlegsv as e on elgreg = algreg
                           where   a~extno in s_extno.
sort gt_sagmeld by guid_lclic.
delete adjacent duplicates from gt_sagmeld comparing all fields.
IF not gt_sagmeld[] is initial.
SELECT /sapsll/legcon~guid_lclic
          /sapsll/legcon~guid_pobj
          /sapsll/legcon~amnt_flt
          /sapsll/legcon~amcur
           but000~bpext
           *revised spec
           /sapsll/corpar~PAFCT
          /sapsll/legcon~guid_mobj
         /sapsll/cuit~guid_cuit
INTO TABLE gt_but000
FROM /SAPSLL/LEGCON
for all entries in gt_sagmeld
where /SAPSLL/legcon~guid_lclic = gt_sagmeld-guid_lclic.
        IF NOT GT_BUT000[] IS INITIAL.
       sort gt_but000 by guid_mobj.
       delete adjacent duplicates from gt_but000 comparing guid_mobj.
     select /sapsll/corpar~guid_mobj
            /sapsll/corpar~PAFCT
            /sapsll/corpar~parno
            into table gt_but001
    from    /sapsll/corpar
    for all entries in gt_but000
    where /sapsll/corpar~guid_mobj = gt_but000-guid_mobj.
   and    /sapsll/corpar~PAFCT = 'SH'.
DELETE gt_but001 where PAFCT <> 'SH'.
*sort gt_corpar by parno.
*delete adjacent duplicates from gt_corpar comparing parno.
*select gd000~partner
      gd000~bpext
     from gd000 into table gt_but001
for all entries in gt_corpar
where gd000~partner = gt_corpar-parno.
my ultimat aim is to select bpext from gd000
can u please explain how to use ranges here and what is the singnificance and how ill i read the data from the final table if we use ranges
regards
Nishant

Printer selection in Forms 10g

Hello,
I am looking for a suggestion, to realize a printer selection in Forms 10g.
For a migration I have to replace the command
win_api_dialog.select_printer with something similar.
Some threads suggest to implement a java class.
Under
How i select printer in Forms9i
exist an example.
The implementation there is based on the JDK 1.4.
I need an implementation based on JDK 1.3.
Inside of the JDK 1.3 exist only a simple printer dialog.
(compare http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4645377 )
Probably exist the option to use the C-API of WebUtil. The C-API could be used to start a printer dialog of a dll. I like to avoid this option, but if you an example for that option, I appreciate to see an example for that.
In all other respects, I hope on your suggestions.

I invest some more time on that topic, but did not found a solution to display a printer selection on the client.
The only thing that i found in forum was that you can read the standard printer out the registry. But I would need all local installed printers.
I hope on your help.

Query in select statment

Hi ,
what is the difference between,select single and
select upto one row .
In a select statment .
Thanks ,
shankar.

According to SAP Performance course the SELECT UP TO 1 ROWS is faster than SELECT SINGLE because you are not
using all the primary key fields.
select single is a construct designed to read database records with primary key. In the absence of the primary key,
it might end up doing a sequential search, whereas the select up to 1 rows may assume that there is no primary key
supplied and will try to find most suitable index.
The best way to find out is through sql trace or runtime analysis.
Use "select up to 1 rows" only if you are sure that all the records returned will have the same value for the field(s)
you are interested in. If not, you will be reading only the first record which matches the criteria, but may be the
second or the third record has the value you are looking for.
The System test result showed that the variant Single * takes less time than Up to 1 rows as there is an additional
level for COUNT STOP KEY for SELECT ENDSELECT UP TO 1 ROWS.
The 'SELECT SINGLE' statement selects the first row in the database that it finds that fulfils the 'WHERE' clause
If this results in multiple records then only the first one will be returned and therefore may not be unique.
Mainly: to read data from
The 'SELECT .... UP TO 1 ROWS' statement is subtly different. The database selects all of the relevant records that
are defined by the WHERE clause, applies any aggregate, ordering or grouping functions to them and then returns
the first record of the result set.
Mainly: to check if entries exist.
You can refer to the below link..
http://www.sap-img.com/abap/difference-between-select-single-and-select-upto-one-rows.htm

Can we selectively flatten form fields in a PDF file?

I have a PDF with some form fields in it. I want to selectively flatten a few form fields in the PDF using a java API. I have checked the documentation and found a method transformPDF in the OutputServiceService. But this method flattens all the form fields in the PDF document.
Can we selectively flatten form fields in a PDF file? If yes how?
This was possible in Adobe Document Server V6.
Regards,
Ragha

You will need an event in the form that will indicate that you want the flattening done. Once you determine what that is it is simply a single statement for each field:
fieldname.access = "readOnly";
Now when the form is rendered, the user will not be able to get access to these fields.

Select statment - fill internal table

Hi,
I have following situation:
TYPES: BEGIN OF q_data,
         i_lqua LIKE lqua,
         v_xxx(20) type c,
       END OF q_data.
DATA: a_data TYPE STANDARD TABLE OF q_data.
Now I would write a select statment and fill the table a_data.
select lqua~matnr lqua~werks... from lqua inner join mch1 into (i_lqua-matnr, i_lqua-werks.....)...
Is it possible to write a statement without writing the whole structure (all the names of columns) of lqua in the SQL-statement (lquamatnr lquawerks lqua~........)?
Thanks
Michael

1. you can write that but i think you have to write that in SELECT ...ENDSELECT.
select lquamatnr lquawerks... from lqua inner join mch1 into (i_lqua-matnr, i_lqua-werks.....
append i_lqua.
endselect.
2. OR you can use INTO CORRESPONDING FIELDS OF TABLE
   select lquamatnr lquawerks... from lqua inner join mch1 into corresponding fields of table i_lqua.

"I have to manually select pop up blocker everytime i open firefox. how can i make it permenent?'

i have to manually select pop up blocker everytime i open new firefox window. How can i make this arrangement permenent?
== This happened ==
Every time Firefox opened
== a week ago

See http://kb.mozillazine.org/Preferences_not_saved

Using distinct and orderby in the select statment

Hi All,
Can anyone tell me what is the purpose of using distinct and orderby in the select statment.

Hi,
Using the distinct function with more than one column yields some substantial results. SQL will return the rows with distinct or unique combinations of those columns. Assume this same employee table has another column including the salary of each employee. With the use of the distinct function we can pull a list of unique job titles - salaries.
SQL Code:
SELECT DISTINCT job_titles, salary FROM employees;
SQL has returned all the rows with unique combinations of job titles and salaries. Any duplicate combinations of job titles and salaries will be ignored. For example if we had two CEOs in the table making the same salary each year, only one row would be returned but if we had two CEOs with different salaries, both rows would be returned.
Order by
The SQL ORDER BY clause comes in handy when you want to sort your SQL result sets by some column(s). For example if you want to select all the persons from the already familiar Customers table and order the result by date of birth, you will use the following statement:
SELECT * FROM Customers
ORDER BY DOB
As you can see the rows are sorted in ascending order by the DOB column, but what if you want to sort them in descending order? To do that you will have to add the DESC SQL keyword after your SQL ORDER BY clause:
SELECT * FROM Customers
ORDER BY DOB DESC
If you don't specify how to order your rows, alphabetically or reverse, than the result set is ordered alphabetically, hence the following to SQL expressions produce the same result:
SELECT * FROM Customers
ORDER BY DOB
SELECT * FROM Customers
ORDER BY DOB ASC
You can sort your result set by more than one column by specifying those columns in the SQL ORDER BY list. The following SQL expression will order by DOB and LastName:
SELECT * FROM Customers
ORDER BY DOB, LastName
if its useful reward points

Select statment - where clause

Hello experts,
I want to write a select statment,
e.g.
select * from pa0001 where ename like '%Rahul%'.
so this stamemt will give me all DB rows in which ename contains Rahul but i also want rows those are having rahul or rAhul or raHul or RAhul or RAHul or RaHul like wise....
can u plz help me on this ???

Hi
Find the below code which may be useful for your requirement
ranges:r_sel for lfa1-name1.
data:v_name(5) type c value 'laxmi'.
data:len type i,
v_num type i,
v_num1 type i,
v_num2 type i,
v_name1(5) type c,
v_name2(5) type c,
v_name_final(7) type c,
v_char type c.
len = strlen( v_name ).
clear:v_name1,v_name2,v_name_final,v_num,v_num1,v_num2.
v_num1 = len.
do len times.
v_num1 = v_num1 - 1.
v_char = v_name+v_num(1).
v_num2 = v_num.
v_num = v_num + 1.
if v_num1 is initial.
    clear:v_name1.
else.
    v_name1 = v_name+v_num(v_num1).
endif.
if v_num2 is not initial.
    v_name2 = v_name+0(v_num2).
endif.
translate v_char to upper case.
concatenate '' v_name2 v_char v_name1 '' into v_name_final.
r_sel-option = 'CP'.
r_sel-sign = 'I'.
r_sel-low = v_name_final.
clear:r_sel-high.
append r_sel.
translate v_char to lower case.
concatenate '' v_name2 v_char v_name1 '' into v_name_final.
r_sel-option = 'CP'.
r_sel-sign = 'I'.
r_sel-low = v_name_final.
clear:r_sel-high.
append r_sel.
enddo.
Use range parameter in your select statement.
Regards
Sripal

Select statment Query

Hi,
I am devloping Query with the table DBERCHZ1
it having two fields
    V_ ABRMENGE        value 456
   N_ ABRMENGE        value   0.67899
Here i want to print as 456.67899 with one select statment.
is any way to sum in select statment.
Thanks

Hi,
I have just given a code snippet similar to your requirement.
DATA:   average TYPE p DECIMALS 2,
        sum     TYPE p DECIMALS 2.
SELECT AVG( luggweight ) SUM( luggweight )
INTO (average, sum)
FROM sbook.
WRITE: / 'Average:', average,
       / 'Sum    :', sum.
Just replace with your variables and let me know if it works.
Thanks,
Harini

Fix Variable in select statment

Hi,
Can we define a variable in select statment .
Example :
Select firstname , lastname
from employees;
in this simple select statment can we define x as number ?

Maybe
SQL> variable x number
SQL> exec :x := 3
PL/SQL procedure successfully completed.
SQL> select :x x, last_name from employees where rownum <= 3
X                                LAST_NAME
3                                King
3                                Kochhar
3                                De Haan
3 rows selected.

Problem in select statment & loop of itab.

Hi all,
      I am having on ITAB1 for, ex which is having five line items or more .
iam also using select statment SINGLE statment for 7 times ,to select values for
different data base table.
for ex,
loop at itab.
   1---> SELECT SINGLE Z_CTRY_ORIG INTO LS_PSHDESN-Z_CTRY_ORIG FROM ZLE_PART_MST
WHERE                           WERKS        = ITAB1-LGNUM
AND                                 MATNR        = ITAB1-MATNR .
2---
3---
4---
endloop
i want to remove from the loop statment and i have to select the datas ..
can any one sugesset some possible ways....
regards
veera

hi,
Solution:
Never use select single in loop at itab!! for that :
Solution 1:
say ur main table is ITAB and rferring this u want to select data from other tables.
SELECT SINGLE Z_CTRY_ORIG INTO LS_PSHDESN-Z_CTRY_ORIG FROM ZLE_PART_MST
into table itab2
FOR ALL ENTRIES IN ITAB
WHERE WERKS = ITAB-LGNUM
AND MATNR = ITAB-MATNR.
With this what will hapeen , u will get all records in itab2 which u can update itab1(master) using loop.
solution 2:
Instead of all this use JOINs in select statement properly and u can fetch data in one shot this will reduce database load as well as abap load ( More than 3 joins in SELECT stmt are not recommeded but can be used)
I believe this is perfect solution if and only if u are giving joins on KEY fields only. Same is applied for wherer clause.
Hope this will help u, if not revert.
Jogdand M B

Select statment & form block

Similar Messages

Maybe you are looking for