Select SUM( ) in inner join - error in code

Hi All,
The following code is using ABAP OO and I get the following error
E:The addition "FOR ALL ENTRIES" excludes all aggregate functions with
the exception of "COUNT( * )", as the single element of the SELECT
clause.
Here is the Code:
select a/bic/ZEDM_ENTP amaterial a~/bic/zedm_stid
a/bic/ZEDM_SDT a/bic/ZEDM_MINH a~/bic/ZEDM_EHD
SUM( b~/bic/ZEDM_QPLN )
c~/bic/ZDEMQTY
from /bic/azdrp_1900 as a inner join /bic/azdrp_0400 as b
on
a/bic/ZEDM_ENTP = b/bic/ZEDM_ENTP and
amaterial = bmaterial and
a/bic/zedm_stid = bplant and
a/bic/ZEDM_SDT = b/bic/zedm_pshp
inner join /bic/azrp_0800 as C
on
amaterial = cmaterial and
a/bic/zedm_stid = c/bic/zedm_stid and
a/bic/ZEDM_SDT = c/bic/ZEDM_ESDT
into table z_it_inv for all entries in
RESULT_PACKAGE where
a~/bic/ZEDM_ENTP = RESULT_PACKAGE-/bic/ZEDM_ENTP
and a~material = RESULT_PACKAGE-material
and a~/bic/ZEDM_SDT = RESULT_PACKAGE-/BIC/OIZEDM_EDT
and a~/bic/zedm_stid = RESULT_PACKAGE-/BIC/OIZEDM_TOST
group by b/bic/ZEDM_ENTP bmaterial b~plant
b~/bic/zedm_pshp
Can you please tell me how to correct this?
Thanks

Hi,
You can get all records first and then LOOP AT Internal table and use COLLECT statement to sum up required column.
This will be a better idea than trying to use SUM in SELECT with JOINS.
ashish

Similar Messages

  • Issue when suming the field in Select query using inner join

    Hi All,
    SELECT A~OI_SHNUM
           A~FORWAGENT        
           A~ROUTE
           A~SHTYP
           A~DTSHP_EACT
           A~/BIC/GTCLICENS
           A~/BIC/GTCADD04
           A~COMP_CODE
           SUM( C~GRS_WGT_DL )
           C~UNIT_OF_WT
      INTO TABLE I_LAYONE
      FROM ( ( /BIC/ANTCD000200 AS A
      INNER JOIN /BIC/AGSSD000700 AS B ON BOI_SHNUM = AOI_SHNUM )
      INNER JOIN /BIC/AGSSD000600 AS C ON CDELIV_NUMB = BDELIV_NUMB ).
    I need to sum the field C~GRS_WGT_DL
    While compiling it show the error given below
    The field "C~UNIT_OF_WT" from the SELECT list is is missing in the
    GROUP BY clause. is missing in the GROUP BY clause. is missing in the
    GROUP BY clause. is missing in the GROUP BY clause. is missing in the
    GROUP BY clause. is "C~UNIT_OF_W
    with regards,
    Thambe

    Hi,
    Try the following SQL statement. Hope it helps you.
    SELECT A~OI_SHNUM
    A~FORWAGENT
    A~ROUTE
    A~SHTYP
    A~DTSHP_EACT
    A~/BIC/GTCLICENS
    A~/BIC/GTCADD04
    A~COMP_CODE
    SUM( C~GRS_WGT_DL )
    C~UNIT_OF_WT
    INTO TABLE I_LAYONE
    FROM ( ( /BIC/ANTCD000200 AS A
    INNER JOIN /BIC/AGSSD000700 AS B ON BOI_SHNUM = AOI_SHNUM )
    INNER JOIN /BIC/AGSSD000600 AS C ON CDELIV_NUMB = BDELIV_NUMB )
    GROUP BY
    A~OI_SHNUM
    A~FORWAGENT
    A~ROUTE
    A~SHTYP
    A~DTSHP_EACT
    A~/BIC/GTCLICENS
    A~/BIC/GTCADD04
    A~COMP_CODE.
    Murthy.

  • Select-options: in inner join

    in this peace of code i got error message like:
    The column name "VBELN" has two meanings..
    Please let me know how to resolve this <b>select-options:</b> problem
    tables:vbap,lips,likp.
    data: begin of first occurs 0,
          vbeln1 like vbap-vbeln,
          matnr2 like vbap-matnr,
          werks3 like lips-werks,
          route4 like likp-route,
          end of first.
    select-options: enter for vbap-vbeln.
          select
                a~vbeln
                a~matnr
                b~werks
                c~route
                into table first
                from vbap as a
                inner join lips as b
              on avbeln = bvbeln
              inner join likp as c
              on bvbeln = cvbeln
             <b> where vbeln in enter.</b>
          loop at first.
              write:/2 sy-vline, first-vbeln1,
                       sy-vline,first-matnr2,
                        sy-vline,first-werks3,
                         sy-vline,first-route4.
              endloop.
    Thanks In advance
    ~~SANDY~~~

    Hi,
    Try this one,it is working fine,
    tables:vbap,lips,likp.
    data: begin of first occurs 0,
    vbeln like vbap-vbeln,
    matnr like vbap-matnr,
    werks like lips-werks,
    route like likp-route,
    end of first.
    select-options: enter for vbap-vbeln.
    <b>select avbeln amatnr bwerks croute into corresponding fields of table first
           from vbap as a inner join lips as b on avbeln = bvgbel
           inner join likp as c on bvbeln = cvbeln
           where a~vbeln in enter.</b>
    loop at first.
    write:/2 sy-vline, first-vbeln,
    sy-vline,first-matnr,
    sy-vline,first-werks,
    sy-vline,first-route.
    endloop.
    Regards,
    Padmam.

  • Inner Join Error?

    Hi Guys ,
          when i am using InnerJoin i am getting Error like
            "For pooled tables ,Cluster tables and Projection Views Join is not allowed"
                    The code is below
               Select * into table it_regup
    From regup as a inner join bkpf as b on aBELNR = bBELNR.
    Thanks,
    Gopi.

    Gopi,
    You can only use join with transparant tables. Since RESUP is a cluster table you will get error. Try the other solution which has been discussed in your other post.
    Rgds,
    Naren

  • Select Query with Inner Join

    Dear Experts,
    I have writen a inner join code with MKPF and MSEG which taking too much time, while I have used index.
    Indexes are:
    MSEG
    MATNR
    WERKS
    LGORT
    BWART
    SOBKZ
    MKPF
    BUDAT
    MBLNR
    My Select Query is :
      SELECT B~MATNR
                   B~MAT_KDAUF
                   B~MAT_KDPOS
                   B~BWART
                   B~MENGE
                   B~MEINS
                   B~AUFNR
        INTO TABLE IT_MSEG
        FROM MKPF AS A
          INNER JOIN MSEG AS B
             ON AMBLNR EQ BMBLNR
            AND AMJAHR EQ BMJAHR
        WHERE A~BUDAT IN BUDAT
          AND B~MATNR IN MATNR
          AND B~WERKS IN WERKS
          AND B~LGORT IN LGORT
          AND B~BWART IN BWART.

    hi,
    you can use  for all entries  it will work faster then joins
    About it:*
    FOR ALL ENTRIES WHERE
    Syntax
    ... FOR ALL ENTRIES IN itab WHERE ... col operator itab-comp ...
    Effect
    If the addition FOR ALL ENTRIES is specified before the language element WHERE, then the components comp of the internal table itab can be used as operands when comparing with relational operators.
    The internal table itab must have a structured line type and the component comp must be compatible with the column col.
    The logical expression sql_cond of the WHERE condition can comprise various logical expressions by using AND and OR. However, if FOR ALL ENTRIES is specified, there must be at least one Comparison with a column of the internal table itab, which can be specified either statistically or dynamically (Release 6.40 and higher). In a statement with a SELECTstatement with FOR ALL ENTRIES, the addition ORDER BY can only be used with the addition PRIMARY KEY.
    The whole logical expression sql_cond is evaluated for each individual line of the internal table itab. The resulting set of the SELECT statement is the union of the resulting sets from the individual evaluations. Duplicate lines are automatically removed from the resulting set. If the internal table itab is empty, the whole WHERE statement is ignored and all lines in the database are put in the resulting set.
    Notes
    In Release 6.10 and higher, the same internal table can be specified after FOR ALL ENTRIES and after INTO.
    The addition FOR ALL ENTRIES is only possible before WHERE conditions of the SELECT statement.
    Example
    Exporting all flight data for a specified departure city. The relevant airlines and flight numbers are first put in an internal table entry_tab, which is evaluated in the WHERE condition of the subsquent SELECT statement.
    PARAMETERS p_city TYPE spfli-cityfrom.
    TYPES: BEGIN OF entry_tab_type,
             carrid TYPE spfli-carrid,
             connid TYPE spfli-connid,
           END OF entry_tab_type.
    DATA: entry_tab   TYPE TABLE OF entry_tab_type,
          sflight_tab TYPE SORTED TABLE OF sflight
                           WITH UNIQUE KEY carrid connid fldate.
    SELECT carrid connid
           FROM spfli
           INTO CORRESPONDING FIELDS OF TABLE entry_tab
           WHERE cityfrom = p_city.
    SELECT carrid connid fldate
           FROM sflight
           INTO CORRESPONDING FIELDS OF TABLE sflight_tab
           FOR ALL ENTRIES IN entry_tab
           WHERE carrid = entry_tab-carrid AND
                 connid = entry_tab-connid.
    hope it will help you
    Rahul sharma
    Edited by: RAHUL SHARMA on Sep 11, 2008 8:10 AM

  • Time Out by select on DD04L inner join DD04T

    Hello,
    I just installed ERP 2005. After the import of a language package (SMLT, IT, FR, ES) I get some problem.
    If I logon with EN or IT (and I think with any language other than DE) many transaction get a Time Out error in the function module DDIF_FIELDINFO_GET by the following selection:
    *             get texts of primary language (inner join here !)
                  SELECT DD04L~ROLLNAME DD04L~DOMNAME DD04L~HEADLEN
                         DD04L~SCRLEN1  DD04L~SCRLEN2 DD04L~SCRLEN3
                         DD04T~DDLANGUAGE DD04T~DDTEXT    DD04T~REPTEXT
                         DD04T~SCRTEXT_S  DD04T~SCRTEXT_M DD04T~SCRTEXT_L
                         INTO TABLE Rolltexts
                         FROM DD04L inner JOIN DD04T
                         ON DD04T~ROLLNAME = DD04L~ROLLNAME AND
                            DD04T~AS4LOCAL = 'A' AND
                            DD04T~DDLANGUAGE = langu_loc
                         FOR ALL ENTRIES IN missing
                         WHERE DD04L~ROLLNAME = missing-ROLLNAME
                           AND DD04L~AS4LOCAL = 'A'.
    That is, the ERP is using sequential read instead of direct read.
    Any idea is welcomed.
    Thanks & regards,
    Tommaso

    Hello,
    Thanks for your replies.
    I checked OSS and I found nothing.
    ST05 gives me this SQL command: (more than 500 sec!)
    SELECT T_00 . "ROLLNAME" , T_00 . "DOMNAME" , T_00 . "HEADLEN" , T_00 . "SCRLEN1" , T_00 . "SCRLEN2" , T_00 . "SCRLEN3" , T_01 . "DDLANGUAGE" , T_01 . "DDTEXT" , T_01 . "REPTEXT" , T_01 . "SCRTEXT_S" , T_01 . "SCRTEXT_M" , T_01 . "SCRTEXT_L" FROM "DD04L"
    T_00 INNER JOIN "DD04T" T_01 ON T_01 . "ROLLNAME" = T_00 . "ROLLNAME" AND T_01 . "AS4LOCAL" = 'A' AND T_01 . "DDLANGUAGE" = 'I' WHERE T_00 . "ROLLNAME" = 'VAL_TEXT' AND T_00 . "AS4LOCAL" = 'A'
    I executed it in SQL Studio and I got also a big execution time.
    But if I try
    SELECT  "ROLLNAME" ,  "DOMNAME" ,  "HEADLEN" , "SCRLEN1" , "SCRLEN2" , "SCRLEN3"  FROM "DD04L" WHERE T_00 . "ROLLNAME" = 'VAL_TEXT' AND T_00 . "AS4LOCAL" = 'A'
    I get the result in 1 ms.
    Is there something wrong in the inner join?
    What does it mean the operation "REOPEN"?
    How can I see from ST05 if an index has been used?
    Thanks & Regards,
    Tommaso

  • Select quer with inner join

    table
    can any please modify the query
    thanking in advance
    BEGIN OF t_initord OCCURS 0,
    vbeln LIKE vbak-vbeln, " Sales Order
    posnr LIKE vbap-posnr, " Sales Order Line Item
    auart LIKE vbak-auart, " Sales Order Type
    bezei LIKE tvakt-bezei, " Sales Order Type Text
    billdo Like vbrk-vbeln, "billing document number
    matnr LIKE vbfa-matnr, " Material
    maktx LIKE makt-maktx, " Material Description
    bstnk LIKE vbak-bstnk, " Customer PO number
    bukrs LIKE vbak-bukrs_vf, " Company Code..
    vkorg LIKE vbak-vkorg, " Sales Org
    vtweg LIKE vbak-vtweg, " Distribution Channel
    spart LIKE vbak-spart, " Division
    vkgrp LIKE vbak-vkgrp, " Sales Group
    augru LIKE vbak-augru, " Order Reason
    abgru LIKE vbap-abgru, " Reson for rejection
    kwmeng LIKE vbap-kwmeng, " Order Line quantit
    deliv LIKE likp-vbeln, " Delivery Number
    delit LIKE lips-posnr, " Delivery Number
    rfmng LIKE vbfa-rfmng, " Delivery Qty..
    vbtyp_n LIKE vbfa-vbtyp_n, " R12 Defect 8938.
    mrnkz LIKE vbkd-mrnkz, " Subsequent Invoicing
    docurr LIKE vbak-waerk, " Document Currency
    netwr LIKE vbap-netwr, " Line Item Amt in Doc curr
    ocdate LIKE vbak-aedat, " Order change date
    objnr LIKE vbap-objnr, " Object number
    rad LIKE sy-datum, " Requested Arrival Date
    submi LIKE ekko-submi, " Collective number
    plant1 LIKE vbap-werks, " Supplying Plant
    ernam LIKE vbak-ernam, " Order Created by
    erdat LIKE vbak-erdat, " Order Created on
    lifnr LIKE ekko-lifnr, " Vendor
    soldto LIKE vbak-kunnr, " Sold-to Party
    shipto LIKE vbak-kunnr, " Ship-to Party
    etenr LIKE vbep-etenr, " Sales Order schedule line
    bmeng LIKE vbep-bmeng, " Order Sch Line quantity
    vrkme LIKE vbap-zieme, " Sales Order UOM
    cad LIKE sy-datum, " Confirmed Arrival Date
    ktokk LIKE lfa1-ktokk, " Vendor account group
    docurramt LIKE vbap-netwr, " Document Currency Amount
    locurr LIKE vbak-waerk, " Local Currency
    locurramt LIKE vbap-netwr, " Local Currency Amount
    werks1 LIKE vbap-werks, " Supplying Plant
    werks_name1 LIKE t001w-name1, " Plant description
    lifnr_name1 LIKE lfa1-name1, " Name of the Vendor
    stat TYPE g_stat_typ, " Status Code
    lstatus TYPE g_stext_typ, " Last Status
    soappr TYPE tj30t-txt30, " Sales Order Approval
    bdnum LIKE vbfa-vbeln, " Billing doc number
    bdlin LIKE vbrp-posnr, " Billing Item
    uecha_b LIKE vbrp-uecha, " Item of Batch split
    uecha_d LIKE lips-uecha, " Item of Batch split
    END OF t_initord.
    This is the internal table
    to get the details wrote a select query
    can any one please correct the select query
    SELECT t1vbeln t2posnr t1auart t4bezei
    t2matnr t5maktx
    t1bstnk t1bukrs_vf t1vkorg t1vtweg t1spart t1vkgrp
    t1augru t2abgru t2kwmeng t8vbeln
    t8posnn t8rfmng t8vbtyp_n t7mrnkz t2waerk t2netwr
    t1aedat t1objnr t1vdatu t1submi t2werks t1ernam t1~erdat
    t6lifnr t1kunnr t9~kunnr
    INTO TABLE t_initord
    FROM vbak AS t1
    INNER JOIN vbap AS t2
    ON t1vbeln EQ t2vbeln
    LEFT OUTER JOIN tvakt AS t4
    ON t1auart EQ t4auart
    AND t4~spras EQ c_en
    LEFT OUTER JOIN makt AS t5
    ON t2matnr EQ t5matnr
    AND t5~spras EQ c_en
    LEFT OUTER JOIN vbpa AS t9
    ON t1vbeln EQ t9vbeln
    AND t9~parvw EQ c_we
    LEFT OUTER JOIN ekko AS t6
    ON t1submi EQ t6ebeln
    LEFT OUTER JOIN vbkd AS t7
    ON t1vbeln EQ t7vbeln AND
    t7~posnr EQ c_initposnr
    LEFT OUTER JOIN vbfa AS t8
    ON t2vbeln EQ t8vbelv AND
    t2posnr EQ t8posnv
    WHERE t1~vbeln IN s_slord
    AND t1~vkbur IN s_sloff
    AND t1~vkgrp IN s_slgrp
    AND t1~kunnr IN s_custag
    AND t1~auart IN s_ortyp
    AND t1~vkorg IN s_slorg
    AND t1~vtweg IN s_disch
    AND t1~spart IN s_divi
    AND t1~erdat IN s_date
    AND t1~bukrs_vf IN s_ccode
    AND t2~ernam IN s_slcre.
    i need to modify the above query to get the additional information into the above table
    billing doument number
    document currency
    document currency amount
    billed quantity
    sold to country
    ship to country

    You can also refer to this code... for making your code better..
    SELECT MATNR
           WERKS
           DISMM
           DISPO
           BESKZ INTO TABLE I_MARC FROM MARC
                 WHERE WERKS IN S_WERKS  AND BESKZ = 'F' AND DISMM <> 'ND'.
      IF NOT I_MARC IS INITIAL.
      SELECT MATNR
             MAKTX INTO TABLE I_MAKT FROM MAKT
                   FOR ALL ENTRIES IN I_MARC
                   WHERE MATNR = I_MARC-MATNR.
      ENDIF.
    REFRESH I_MDPS.
    REFRESH I_MDEZ.
    REFRESH I_MT61D.
    REFRESH I_MDPS2.
    REFRESH I_MDEZ2.
    LOOP AT I_MARC INTO WA_MARC.
    CALL FUNCTION 'MD_STOCK_REQUIREMENTS_LIST_API'
      EXPORTING
        MATNR                          = WA_MARC-MATNR
        WERKS                          = WA_MARC-WERKS
    TABLES
       MDEZX                           = I_MDEZ
    EXCEPTIONS
       MATERIAL_PLANT_NOT_FOUND       = 1
       PLANT_NOT_FOUND                = 2
       OTHERS                         = 3
    LOOP AT I_MDEZ.
       I_MDEZ2-MATNR = WA_MARC-MATNR.
       I_MDEZ2-WERKS = WA_MARC-WERKS.
       MOVE-CORRESPONDING I_MDEZ TO I_MDEZ2.
       APPEND I_MDEZ2.
    ENDLOOP.
    CLEAR I_MDEZ.
    CLEAR I_MDEZ2.
      ENDLOOP.
    Deleting teh records from the internal table which are
    nither purchase order nor purchase requisition.
    if pur_ord = 'X' and Pur_req = 'X'.
      delete i_mdez2 where delkz <> 'BA' and delkz <> 'BE'.
    endif.
    if pur_ord = 'X' and Pur_req <> 'X'.
      delete i_mdez2 where delkz <> 'BE'.
    endif.
    if pur_req = 'X' and pur_ord <> 'X'.
      delete i_mdez2 where delkz <> 'BA'.
    endif.
    Populating the final internal table to be displayed.
    Sort i_mdez2 by matnr werks.
    SORT I_MAKT BY MATNR.
      LOOP AT I_MDEZ2 WHERE LIFNR IN S_LIFNR.
              wa_final-werks = i_mdez2-werks.
              WA_FINAL-LIFNR = I_MDEZ2-LIFNR.
              WA_FINAL-EXTRA = I_MDEZ2-EXTRA.
              WA_FINAL-MNG01 = I_MDEZ2-MNG01.
              WA_FINAL-AUSKT = I_MDEZ2-AUSKT.
              WA_FINAL-UMDAT = I_MDEZ2-UMDAT.
              WA_FINAL-WERKS = I_MDEZ2-WERKS.
              WA_FINAL-MATNR = I_MDEZ2-MATNR.
              wa_final-delkz = i_mdez2-delkz.
    For Message to be displayed with the Purchase Order and Purchase Requisition.
              PERFORM TEXT_EXCEPTION.
              READ TABLE I_MAKT INTO WA_MAKT WITH KEY MATNR = WA_FINAL-MATNR BINARY SEARCH.
              IF SY-SUBRC = 0.
                WA_FINAL-MAKTX = WA_MAKT-MAKTX.
              ENDIF.
           APPEND WA_FINAL TO I_FINAL .
      ENDLOOP.
        IF SY-SUBRC <> 0.
           MESSAGE I058.
           leave program.
        ENDIF.
    Selecting the Purchase Organisation from the EKKO table.
    if not i_final is initial.
      SELECT EBELN EKORG LIFNR INTO TABLE I_EKKO FROM EKKO
             FOR ALL ENTRIES IN I_FINAL
             WHERE LIFNR = I_FINAL-LIFNR.
    Selecting the name of the vendor from the LFA1 table.
      select lifnr name1 into table i_lfa1 from lfa1
             for all entries in i_final
             where lifnr = i_final-lifnr.
    Selecting the current date from the eban table.
       select matnr lfdat into table i_eban from eban
            for all entries in i_final
            where matnr = i_final-matnr." and bnfpo = i_ekpo-bnfpo.
    endif.
    if not i_ekko is initial.
    Selecting the Unit Price from EKPO for finding the Extended amount.
      SELECT EBELN ebelp NETPR MATNR  banfn bnfpo INTO TABLE I_EKPO FROM EKPO
             FOR ALL ENTRIES IN I_EKKO
             WHERE EBELN = I_EKKO-EBELN.
    endif.
    if not i_ekpo is initial.
    Selecting the current date from the Eket table.
    select ebeln ebelp eindt into table i_eket from eket
           for all entries in i_ekpo
           where ebeln = i_ekpo-ebeln and ebelp = i_ekpo-ebelp.
    endif.
    *Sorting the internal tables.
    SORT I_EKKO BY LIFNR.
    sort i_lfa1 by lifnr.
    SORT I_EKPO BY MATNR.
    sort i_eket by ebeln ebelp.
    sort i_eban by matnr.
      LOOP AT I_FINAL INTO WA_FINAL.
        READ TABLE I_EKKO INTO WA_EKKO WITH KEY LIFNR = WA_FINAL-LIFNR.
           WA_FINAL-EKORG = WA_EKKO-EKORG.
          wa_final-ebeln = wa_ekko-ebeln.
         read table i_lfa1 into wa_lfa1 with key lifnr = wa_final-lifnr.
           wa_final-name1 = wa_lfa1-name1.
           READ TABLE I_EKPO INTO WA_EKPO WITH KEY MATNR = WA_FINAL-MATNR.
             wa_final-ebelp = wa_ekpo-ebelp.
             WA_FINAL-NETPR = WA_EKPO-NETPR.
           if wa_final-delkz = 'BA'.
             read table i_eban into wa_eban with key matnr = wa_final-matnr.
             wa_final-dat00 = wa_eban-lfdat.
           endif.
           if wa_final-delkz = 'BE'.
             read table i_eket into wa_eket with key ebeln = wa_final-ebeln ebelp = wa_final-ebelp.
              wa_final-dat00 = wa_eket-eindt.
           endif.
           WA_FINAL-EXTND_AMOUNT = WA_FINAL-MNG01 * WA_FINAL-NETPR.
        MODIFY I_FINAL FROM WA_FINAL TRANSPORTING EKORG name1 dat00 EXTND_AMOUNT.
      ENDLOOP.
    In this I have taken many internal tables... according to the database table I am extracting from .. then I am bringing all the record in the final internal table which will be containing teh records from all the internal table that i have used..
    Regards,
    Jayant
    <b>Please award if helpful</b>

  • Select query for inner join

    Hi all,
    give me the query with innerjoin
    Based on the input values of Material number (MARC-MATNR) from selection screen check and get the Special Procurement type details from MARC-SOBSL and Material description details from MAKT-MAKTX.
    basha....
    Moderator message - instead of asking, you should try to write the code yourself and get back to the forum if you have a specific question.
    Edited by: Rob Burbank on Apr 19, 2009 4:46 PM

    Hi,
    Please Test the following Sample Code it is according to your requirement hope will solve out your problem,
    TABLES: marc.
    SELECt-OPTIONS somatnr for marc-matnr.
    TYPES: BEGIN OF ty_matnr,
      matnr LIKE marc-matnr,
      sobsl LIKE marc-sobsl,
      maktx LIKE makt-maktx,
      END OF ty_matnr.
    DATA: it_matnr TYPE STANDARD TABLE OF ty_matnr WITH HEADER LINE.
    SELECT marc~matnr marc~sobsl makt~maktx
      into CORRESPONDING FIELDS OF TABLE it_matnr
      from marc INNER JOIN makt on ( marc~matnr eq makt~matnr )
      WHERE marc~matnr in somatnr.
    Best Regards,
    Faisal

  • Select querry using inner join

    Hi Friends,
    I need to fetch data from two tables, I used inner join but I am not able to fetch the data in some fields can any one tell me what is wrong in this select querry.
    SELECT but000~partner
             but000~name_org1
             but000~name_first
             but000~name_last
             but000~bpext
          FROM but000 INNER JOIN dfkkop ON but000partner = dfkkopgpart
        INTO table lt_but000
        WHERE but000~partner IN so_part
        AND dfkkop~faedn IN so_faedn.
    Thanx in advance,
    Parvez

    hi Lutin,
    SELECT but000~partner
    but000~name_org1
    but000~name_first
    but000~name_last
    but000~bpext
    FROM but000 INNER JOIN dfkkop ON but000partner = dfkkopgpart  <------check this condition,it has to *satisfy  both table                                                                        
    INTO table lt_but000
    WHERE but000~partner IN so_part
    AND dfkkop~faedn IN so_faedn.
    Regards,
    siva
    Message was edited by:
            SivaKumar

  • How to re-write this big SELECT Query with INNER JOINs?

    Hi Experts
    I have a performance killer SELECT query with an inner join of 3 tables u2013 VBAP, VBAK and VBEP together, which populates records to an internal table INT_COLL_ORD. Based on these records selected, in another SELECT query, records are fetched from VBUK table to the internal table INT_VBUK.
    SELECT A~VBELN A~POSNR A~MATNR A~KWMENG A~KBMENG A~ERDAT A~ERZET A~PSTYV D~AUART E~ETTYP E~EDATU
    INTO TABLE INT_TAB_RES
    FROM VBAP AS A INNER JOIN VBAK AS D
    ON D~VBELN EQ A~VBELN AND D~MANDT EQ A~MANDT
    INNER JOIN VBEP AS E
    ON E~VBELN EQ A~VBELN AND E~POSNR EQ A~POSNR AND E~MANDT EQ A~MANDT
    WHERE  A~VBELN IN s_VBELN AND
           D~auart in s_auart AND
           D~vkorg in s_vkorg AND
           D~vbtyp eq 'C'     AND
           ( ( matnr LIKE c_prefix_sp AND zz_msposnr NE 0 AND kbmeng EQ 0 )
           OR ( matnr LIKE c_prefix_fp AND kwmeng NE A~kbmeng ) ) AND
           A~ABGRU EQ SPACE AND
           A~MTVFP IN R_MTVFP AND
           A~PRCTR IN R_PRCT AND
           E~ETENR EQ '1'.
    SORT INT_COLL_ORD BY VBELN POSNR ETTYP.
    DELETE ADJACENT DUPLICATES FROM INT_TAB_RES COMPARING VBELN POSNR.
    CHECK NOT INT_TAB_RES [] IS INITIAL.
    SELECT VBELN UVALL CMGST INTO TABLE INT_VBUK
    FROM VBUK FOR ALL ENTRIES IN INT_TAB_RES
    WHERE VBELN = INT_TAB_RES-VBELN AND UVALL NE 'A'.
    Now, the requirement is:
    I want to split this query. Like, first join VBAK and VBUK first. With this selection, go to the inner join of VBAP and VBEP (on key VBELN) to get the results. How can I re-write this Query?
    Please help.
    Thx n Rgds

    Hi Nagraj
    As of your suggestion, I have re-written the query as below:
    * Declarations
    TYPES: BEGIN OF TYP_COLL_ORD,
            VBELN  LIKE VBAK-VBELN,
            POSNR  LIKE VBUP-POSNR,
            MATNR  LIKE VBAP-MATNR,
            KWMENG LIKE VBAP-KWMENG,
            KBMENG LIKE VBAP-KBMENG,
            ERDAT  LIKE VBAK-ERDAT,
            ERZET  LIKE VBAK-ERZET,
            PSTYV  LIKE VBAP-PSTYV,
            AUART  LIKE VBAK-AUART, u201Calready exists in type
            ETTYP  LIKE VBEP-ETTYP,
            EDATU  LIKE VBEP-EDATU.
    TYPES: END OF TYP_COLL_ORD.
    DATA: INT_COLL_ORD TYPE TABLE OF TYP_COLL_ORD WITH HEADER LINE.
    TYPES: BEGIN OF TYP_VBUK,
            AUART  LIKE VBAK-AUART, u201Chave added this field
            VBELN  LIKE VBUK-VBELN,
            UVALL  LIKE VBUK-UVALL,
            CMGST  LIKE VBUK-CMGST.
    TYPES: END OF TYP_VBUK.
    DATA: INT_VBUK TYPE TABLE OF TYP_VBUK WITH HEADER LINE.
    *QUERY#1 u2013 for VBAK & VBUK Join
    SELECT A~AUART B~VBELN B~UVALL B~CMGST
    INTO TABLE INT_VBUK
    FROM VBAK AS A INNER JOIN VBUK AS B
    ON A~VBELN EQ B~VBELN
    WHERE A~VBELN IN s_VBELN AND
    A~auart in s_auart AND
    A~vkorg in s_vkorg AND
    A~vbtyp eq 'C' AND
    B~UVALL NE 'A'.
    IF NOT INT_VBUK[] IS INITIAL.
    SORT INT_VBUK BY VBELN.
    DELETE ADJACENT DUPLICATES FROM INT_VBUK COMPARING VBELN.
    *QUERY#2 u2013 for VBAP & VBEP Join
    SELECT A~VBELN A~POSNR A~MATNR A~KWMENG A~KBMENG A~ERDAT A~ERZET A~PSTYV B~ETTYP B~EDATU
    INTO TABLE INT_COLL_ORD
    FROM VBAP AS A INNER JOIN VBEP AS B
    ON B~VBELN EQ A~VBELN AND B~POSNR EQ A~POSNR AND B~MANDT EQ A~MANDT
    FOR ALL ENTRIES IN INT_VBUK
    WHERE A~VBELN = INT_VBUK-VBELN AND
    ( ( matnr LIKE c_prefix_sp AND zz_msposnr NE 0 AND kbmeng EQ 0 )
    OR ( matnr LIKE c_prefix_fp AND kwmeng NE A~kbmeng ) ) AND
    A~ABGRU EQ SPACE AND
    A~MTVFP IN R_MTVFP AND
    A~PRCTR IN R_PRCT AND
    B~ETENR EQ '1'.
    ENDIF.
      SORT INT_COLL_ORD BY  VBELN POSNR ETTYP.
      DELETE ADJACENT DUPLICATES FROM INT_COLL_ORD
        COMPARING VBELN POSNR.
      CHECK NOT INT_COLL_ORD[] IS INITIAL.
      LOOP AT INT_COLL_ORD.
        CLEAR: L_MTART,L_ATPPR,L_ETTYP.
        IF L_PREVIOUS_ETTYP NE INT_COLL_ORD-ETTYP OR
          L_PREVIOUS_AUART NE INT_COLL_ORD-AUART.
          READ TABLE INT_OVRCTL WITH KEY AUART = INT_COLL_ORD-AUART ETTYP = INT_COLL_ORD-ETTYP.
          CHECK SY-SUBRC NE 0.
    Now, the issue is:
    Please note that declaration for INT_COLL_ORD has a field AUART, which is used in further parts of program (see the statement just above)
    But, since neither VBAP nor VBEP contains AUART field, it cannot be fetched through the QUERY#2. So this value is not populated into INT_COLL_ORD through SELECT Query.
    Since this field is used in later part of program & that the internal table has no value for this field, it dumps!!
    How to include this value into the INT_COLL_ORD?
    Plz suggest....

  • Select with inner join

    hi friends,
    can we use where clause in select statement with inner join.
    i am using following code which gives error (The column name "WERKS" has two meanings . .).
      SELECT AMATNR ACHARG AERSDA BMENGE B~MEINS
          FROM MCHA AS A INNER JOIN CHVW AS B
          ON ACHARG = BCHARG
          INTO TABLE T_OUTPUT1
          WHERE WERKS = PLANT AND CHARG = P_CHARG.
    thanks.

    Yes u can  use where clause in select statement with inner join.
    SELECT AMATNR ACHARG AERSDA BMENGE B~MEINS
    FROM MCHA AS A INNER JOIN CHVW AS B
    ON ACHARG = BCHARG
    INTO TABLE T_OUTPUT1
    WHERE WERKS = PLANT AND CHARG = P_CHARG.
    " mention  the table name in where condition also like awerks or bwerks.
    egards
    Rajendra

  • SELECT INNER JOIN vs WHERE

    Hello
    What is the best programming, putting selection in the inner join or in where clause.  Below is some sample code that works but wondering if C~statu='X' would have been better in the Where part of the statement in stead as part of the inner join?  Maybe don't need the Where in this select statment just code in the inner joins?
    SELECT algnum abdatu btanum btapos atbnum btbpos b~werks
             blgort bmatnr bmeins bmaktx bvsolm bvltyp b~vlpla
             b~nlpla
        INTO TABLE gt_ltak
        FROM ltak AS a
        INNER JOIN ltap AS b ON blgnum = algnum AND
                                                 btanum = atanum
        INNER JOIN lrf_wkqu AS c ON clgnum = algnum     AND
                                                         c~bname = sy-uname AND
                                                         cqueue = aqueue    AND
                                                         c~statu = 'X'
        INNER JOIN zis_prog_vars AS d ON d~pgm = 'ZRF_TRANS_03_0100' AND
                                                                  d~fld = l_priority                            AND
                                                                  dval1 = atbpri
        WHERE a~lgnum = '170'        AND
                     a~tanum = '0000001399'.

    Hi,
    Herewith the corrected version:
    SELECT a~lgnum a~bdatu b~tanum b~tapos a~tbnum b~tbpos b~werks
           b~lgort b~matnr b~meins b~maktx b~vsolm b~vltyp b~vlpla b~nlpla
      INTO TABLE gt_ltak
      FROM ltak AS a
    INNER JOIN ltap AS b ON b~lgnum = a~lgnum AND
                             b~tanum = a~tanum  
    INNER JOIN lrf_wkqu AS c ON c~lgnum = a~lgnum AND
                                 c~queue = a~queue AND
    INNER JOIN zis_prog_vars AS d ON d~val1 = a~tbpri
    WHERE a~lgnum = '170'
       AND a~tanum = '0000001399'
       AND c~bname = sy-uname
       AND c~statu = 'X'
       AND d~pgm = 'ZRF_TRANS_03_0100'
       AND d~fld = l_priority.
    Kr,
    m.

  • Need help SELECT wiht  INNER JOIN

    Hi,
    I need the the entire record of the MVKE with the same vkorg as in the table YMMARKET. Why has the bellow Join syntex error. Thank you
      SELECT *
        FROM MVKE
        INNER JOIN YMMARKET_CODE ON mvkevkorg = ymmarket_codevkorg
        WHERE matnr = p_matnr.
      ENDSELECT.

    Hello,
    Do this:
    DATA:
      lt_mvke TYPE STANDARD TABLE OF MVKE.
    SELECT <field1> <field2>
    INTO TABLE lt_mvke
    FROM MVKE AS M INNER JOIN YMMARKET_CODE AS Y ON m~vkorg = y~vkorg
    WHERE matnr = p_matnr.
    When using inner join you need to specify the fields.
    I suggest you the following:
    SELECT * FROM MVKE INTO TABLE lt_mvke
      FOR ALL ENTRIES IN YMMARKET_CODE
      WHERE matnr = p_matnr
           AND vkorg = ymmarket_code-vkorg.
    Regards,

  • Data is not fetching in inner join

    Hi Experts,
    I developed a select query using inner joins, all the fields data is gettting appended, but one field DISPO data is not getting appeneded. please check the innerjoin and suggest me ur soluitons.
    MODULE GET_DATA OUTPUT.
      select   arbpl
             sptag
             aufnr
             plnum
             posnr
             plnfl
             werks  from s022
                        into table it_s022
                         where arbpl in s_arbpl
                          and  werks in s_werks
                          and  sptag in s_sptag
                          and  matnr in s_matnr.
    if sy-subrc eq 0.
    select a~aufnr
           a~posnr
           a~kdauf
           a~pgmng
           a~plnum
           a~strmp
           b~plnty
           b~gamng
           b~igmng
           b~iasmg
           b~rmnga
           b~gstrp
           b~rsnum
           b~plnbez
           b~dispo
           c~maktx
           b~plnnr
           b~plnty
           b~zaehl
           d~vornr
           d~ltxa1
           b~aufpl
           b~aplzt
           e~astnr
           into corresponding fields of table it_afpo from  afko as b
                    inner join afpo as  a
                     on a~aufnr = b~aufnr
                    inner join makt as c
                     on b~plnbez = c~matnr
                    inner join plpo as d
                     on b~plnnr  = d~plnnr
                      and b~plnty = d~plnty
                      and b~zaehl  = d~zaehl
                     inner join aufk as e
                      on b~aufnr = e~aufnr
                    inner join marc as f
                     on bplnty = fmatnr
                    for all entries in it_s022
                     where b~aufnr = it_s022-aufnr.
                         and e~erdat = it_s022-sptag
                     and  a~posnr = it_s022-posnr
                    and  a~plnum = it_s022-plnum .  .
      if sy-subrc eq 0.
        it_afpo1[] = it_afpo[].
        sort it_afpo1 by aufpl." aplzt."""
        delete ADJACENT DUPLICATES FROM it_afpo1 COMPARING aufpl." aplzt ."""
        select aufpl
               aplzl
               fsavd
               fsavz
               ssedd
               ssedz
               mgvrg
                FROM  afvv  INTO TABLE It_afvv
                               FOR ALL ENTRIES IN IT_afpo1
                               WHERE aufpl = IT_afpo1-aufpl.
                                and aplzl = it_afpo1-aplzt.
       endif.
    loop at it_afpo into wa_afpo.
    DATA : G_SLNO(8) TYPE C.
    G_SLNO = G_SLNO + 1.
    wa_afpo-slno = g_slno.
        move-corresponding wa_afpo to wa_final.
       move-corresponding wa_afko to wa_final.
      read table it_afvv into wa_afvv with key
                aufpl = wa_afpo-aufpl binary search."aplzl = wa_afpo-aplzt binary search."""
    *read table it_afko into wa_afko with key aufnr = wa_final-aufnr.
      IF SY-SUBRC EQ 0.
        move-corresponding wa_afvv to wa_final.
    bal_qty = wa_final-gamng - wa_final-igmng.
        move : wa_afpo-slno  to wa_final-slno,
               wa_afpo-aufnr to wa_final-aufnr,
               wa_afpo-posnr to wa_final-posnr,
               wa_afpo-kdauf to wa_final-kdauf, " Sales order Number
               wa_afpo-pgmng to wa_final-pgmng, " Order item qty
               wa_afpo-plnum to wa_final-plnum, " Planned  Order Qty
               wa_afpo-strmp to wa_final-strmp, " Planned Order Date
               wa_afpo-gstrp to wa_final-gstrp, " Basic Finish  date
               wa_afpo-rsnum to wa_final-rsnum, " Number of Reservation
               wa_afpo-plnbez to wa_final-plnbez, " Material Number
               wa_afpo-maktx to wa_final-maktx,
               wa_afpo-plnnr to wa_final-plnnr,
               wa_afpo-plnty to wa_final-plnty,
               wa_afpo-zaehl to wa_final-zaehl,
               wa_afpo-vornr to wa_final-vornr,
               wa_afpo-ltxa1 to wa_final-ltxa1,
               wa_afpo-aufpl to wa_final-aufpl,
               wa_afvv-fsavd to wa_final-fsavd,
               wa_afvv-fsavz to wa_final-fsavz,
               wa_afvv-ssedd to wa_final-ssedd,
               wa_afvv-ssedz to wa_final-ssedz,
               wa_afvv-mgvrg to wa_final-mgvrg,
               wa_afko-igmng to wa_final-igmng,
               wa_afko-iasmg to wa_final-iasmg,
               wa_afko-rmnga to wa_final-rmnga,
               wa_afko-dispo to wa_final-dispo,
              wa_afko-bal_qty to wa_final-bal_qty,
               wa_aufk-astnr to wa_final-astnr,
               wa_afpo-text  to wa_final-text.
    *bal_qty = wa_final-gamng - wa_final-igmng.
    *bal_qty = wa_afko-bal_qty.
      endif.
      append wa_final to it_final.
      clear:wa_final ,wa_afpo,wa_afvv,wa_aufk,wa_afko.
    endloop.
    endif.
    ENDMODULE.                 " GET_DATA  OUTPUT
    *&      Module  DISPLAY_DATA  OUTPUT
          text
    MODULE DISPLAY_DATA OUTPUT.
      IF REF_CONTAINER IS INITIAL.
         PERFORM FIELD_CAT.
      CREATE OBJECT REF_CONTAINER
      EXPORTING
           PARENT                      =
        CONTAINER_NAME              = 'CUSTOM_CONTROL'
           STYLE                       =
           LIFETIME                    = lifetime_default
           REPID                       =
           DYNNR                       =
           NO_AUTODEF_PROGID_DYNNR     =
          EXCEPTIONS
            CNTL_ERROR                  = 1
            CNTL_SYSTEM_ERROR           = 2
            CREATE_ERROR                = 3
            LIFETIME_ERROR              = 4
            LIFETIME_DYNPRO_DYNPRO_LINK = 5
            others                      = 6
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      L_LAYO-ZEBRA = 'X'.
      L_LAYO-GRID_TITLE = 'JOB CARD'.
      data: variant type disvariant.
      CREATE OBJECT REF_ALV_GRID
        EXPORTING
           I_SHELLSTYLE      = 0
           I_LIFETIME        =
          I_PARENT          = REF_CONTAINER
           I_APPL_EVENTS     = space
           I_PARENTDBG       =
           I_APPLOGPARENT    =
           I_GRAPHICSPARENT  =
           I_NAME            =
           I_FCAT_COMPLETE   = SPACE
          EXCEPTIONS
            ERROR_CNTL_CREATE = 1
            ERROR_CNTL_INIT   = 2
            ERROR_CNTL_LINK   = 3
            ERROR_DP_CREATE   = 4
            others            = 5
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    l_variant-report = sy-cprog.
    *data: l_prnt type lvc_s_prnt.
    *l_prnt-print = 'X'.
      SORT T_FCAT.
      call method ref_alv_grid->set_ready_for_input
       exporting
        i_ready_for_input = 1.
    create object event_receiver.
       set handler event_receiver->handle_top_of_page for ref_alv_grid.
      CALL METHOD REF_ALV_GRID->SET_TABLE_FOR_FIRST_DISPLAY
           EXPORTING
           I_BUFFER_ACTIVE               =
           I_BYPASSING_BUFFER            =
           I_CONSISTENCY_CHECK           =
           I_STRUCTURE_NAME              =
            is_variant                     =  variant   "l_variant
            i_save                        = 'X'
           I_DEFAULT                     = 'X'
             IS_LAYOUT                     = L_LAYO
           IS_PRINT                      =
           IT_SPECIAL_GROUPS             =
           IT_TOOLBAR_EXCLUDING          =
           IT_HYPERLINK                  =
           IT_ALV_GRAPHICS               =
           IT_EXCEPT_QINFO               =
           IR_SALV_ADAPTER               =
        CHANGING
          IT_OUTTAB                     = IT_final[]
          IT_FIELDCATALOG               = T_FCAT
           IT_SORT                       =
           IT_FILTER                     =
          EXCEPTIONS
            INVALID_PARAMETER_COMBINATION = 1
            PROGRAM_ERROR                 = 2
            TOO_MANY_LINES                = 3
            others                        = 4
      IF SY-SUBRC <> 0.
        MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                   WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
       create object g_event_receiver.
       set handler g_event_receiver->handle_user_command for ref_alv_grid.
       set handler g_event_receiver->handle_toolbar for ref_alv_grid.
    § 4.Call method 'set_toolbar_interactive' to raise event TOOLBAR.
       call method ref_alv_grid->set_toolbar_interactive.
       call method cl_gui_control=>set_focus exporting control = ref_alv_grid.
    ENDIF.
    ENDMODULE.                 " DISPLAY_DATA  OUTPUT
    *&      Module  STATUS_0100  OUTPUT
          text
    MODULE STATUS_0100 OUTPUT.
      SET PF-STATUS 'MAIN001'.
    SET TITLEBAR 'xxx'.
    Regards,
    Bharath Kumar

    I agree with Shiva Kumar - most likely there is no such field in it_afpo. A few more suggestions though:
    1) Do not post large pieces of code here - if you have a question about a particular SELECT statement, post only that statement and relevant data definitions. No one is going to read your whole program  anyway - we have work to do too.
    2) Your JOIN is way too big and would be difficult to analyze if anything goes wrong. You might want to start with smaller SELECTs and, when you're sure everything is working correctly, then combine them into one. Also huge JOINT is not necessarily more efficient.
    3) You don't have to use aliases "AS a... AS b", etc. Instead, just use the table name, e.g. AFKO... AFPO... .It is much easier to read this way. The aliases are needed only if you're joining the same table more than once. Also they're not limited to one letter either.

  • Help with Inner Join query in SQL

    Hope someone can help with this, as this is quite an involved project for me, and I'm just about there with it.
    My table structure is :
    table_packages
    packageID
    package
    packageDetails
    etc
    table_destinations
    destinationID
    destination
    destinationDetails
    etc
    table_packagedestinations
    packageID
    destinationID
    ..so nothing that complicated.
    So the idea is that I can have a package details page which shows the details of the package, along any destinations linked to that package via the packagedestinations table.
    So this is the last part really - to get the page to display the destinations, but I'm missing something along the way....
    This is the PHP from the header, including my INNER JOIN query....
    PHP Code:
    <?php
    $ParampackageID_WADApackages = "-1";
    if (isset($_GET['packageID'])) {
      $ParampackageID_WADApackages = (get_magic_quotes_gpc()) ? $_GET['packageID'] : addslashes($_GET['packageID']);
    $ParamSessionpackageID_WADApackages = "-1";
    if (isset($_SESSION['WADA_Insert_packages'])) {
      $ParamSessionpackageID_WADApackages = (get_magic_quotes_gpc()) ? $_SESSION['WADA_Insert_packages'] : addslashes($_SESSION['WADA_Insert_packages']);
    $ParampackageID2_WADApackages = "-1";
    if (isset($_GET['packageID'])) {
      $ParampackageID2_WADApackages = (get_magic_quotes_gpc()) ? $_GET['packageID'] : addslashes($_GET['packageID']);
    mysql_select_db($database_connPackages, $connPackages);
    $query_WADApackages = sprintf("SELECT packageID, package, costperpax, duration, baselocation, category, dateadded, agerange, hotel, educational_tours, field_trips, corporate_outings, plant_visits, budget_package, rollingtours, teambuilding, description, offer FROM packages WHERE packageID = %s OR ( -1= %s AND packageID= %s)", GetSQLValueString($ParampackageID_WADApackages, "int"),GetSQLValueString($ParampackageID2_WADApackages, "int"),GetSQLValueString($ParamSessionpackageID_WADApackages, "int"));
    $WADApackages = mysql_query($query_WADApackages, $connPackages) or die(mysql_error());
    $row_WADApackages = mysql_fetch_assoc($WADApackages);
    $totalRows_WADApackages = mysql_num_rows($WADApackages);
    $colname_educationalDestinations = "1";
    if (isset($_GET['PackageID'])) {
      $colname_educationalDestinations = (get_magic_quotes_gpc()) ? packageID : addslashes(packageID);
    mysql_select_db($database_connPackages, $connPackages);
    $query_educationalDestinations = sprintf("SELECT * FROM destinations INNER JOIN (packages INNER JOIN packagedestinations ON packages.packageID = packagedestinations.packageID) ON destinations.destinationID = packagedestinations.destinationID WHERE packages.packageID = %s ORDER BY destination ASC", GetSQLValueString($colname_educationalDestinations, "int"));
    $educationalDestinations = mysql_query($query_educationalDestinations, $connPackages) or die(mysql_error());
    $row_educationalDestinations = mysql_fetch_assoc($educationalDestinations);
    $totalRows_educationalDestinations = mysql_num_rows($educationalDestinations);
    ?>
    And where I'm trying to display the destinations themselves, I have : 
    <table>
            <tr>
                     <td>Destinations :</td>
                </tr>
               <?php do { ?>
            <tr>
                 <td><?php echo $row_educationalDestinations['destination']; ?></td>
            </tr>
            <?php } while ($row_educationalDestinations = mysql_fetch_assoc($educationalDestinations)); ?>
    </table>
    If anyone could have a quick look and help me out that would be much appreciated - not sure if its my SQL at the top, or the PHP in the page, but either way it would be good to get it working. 
    Thanks.

    First off, you need to get the database tables so that there is a relationship between them.
    In fact, if there is a one to one relationship, then it may be better to store all of your information in one table such as
    table_packages
    packageID
    package
    packageDetails
    destination
    destinationDetails
    etc
    If there is a one to many relationship, then the following would be true
    packages
    packageID
    package
    packageDetails
    etc
    destinations
    destinationID
    packageID
    destination
    destinationDetails
    etc
    The above assumes that there are many destinations to one package with the relationship coloured orange.
    Once you have the above correct you can apply your query as follows
    SELECT *
    FROM packages
    INNER JOIN destinations
    ON packages.packageID = destinations.packageID
    WHERE packages.packageID = %s
    ORDER BY destination ASC
    The above query will show all packages with relevant destinations

Maybe you are looking for

  • Looking for promo code for ordering an iPhoto book!

    Hello. I am really hoping someone has information about any current promo codes when ordering iPhoto photo books. They are so nice but pricey!

  • Possible to run a photoshop script by selecting files in Bridge?

    Hi, I have a good script I've written that I always used to run from Photoshop. The script has a dialog box which asks where to get the files from. Is it possible to select files in bridge and run the script from there? Without rewriting it for Bridg

  • Oracle 64-bit and database connectivity toolkit

    Hello- I am attempting to connect to an Oracle database by interfacing the databse connectivity toolkit with the Oracle 10.2.0.3 64-bit that my customer uses. I am running LV13 32-bit on their machine. I am unable to connect to the database. Are ther

  • MBP casing is warping and scratching

    My MBP has two odd protrusions in the laptop casing. 1) On the right side of the laptop where your right palm rests when you type on the keyboard. I've tried tightening the screw and it does not solve the issue. 2) In the middle of the laptop between

  • Trouble uninstalling Boot Camp

    A few weeks ago, I installed Boot Camp which partitioned my drive accordingly. I then tried to follow the steps I derived from 2 different forums to create a Windows XP boot disk from my Virtual PC disks. I could not get this to work, so I never inst