Select/transform tool changes to pan tool when working with text

I have had this problem since Motion 2, and version 3 is no different. Whenever I work with text in Motion, at some point while moving the text in the canvas, the select/transform tool will suddenly change into the Pan tool, and it won't let me do anything else but pan things. I have to close and reopen Motion to correct this. It happens VERY OFTEN, every time I work with text...it get's really annoying haveing to conatantly quit and reopen the program. I lose a lot of time doing that. Has anyone else had this problem? I also have a Powermac G5 that has the same problem so I know it's not the Mac Pro. Any suggestions?

Sounds familiar.
I searched and saw a couple posts from Patrick that suggested,
"This seems to happen after adjusting text. Simply click on the canvas and press space. The project won't play and the hand will turn into your selected tool."
see:
http://discussions.apple.com/thread.jspa?messageID=2249852&#2249852
http://discussions.apple.com/thread.jspa?messageID=4299262&#4299262

Similar Messages

InDesign CC is performing poorly, slowly when working with text.

InDesign CC is performing poorly, slowly when working with text. I tried updating and it seems like everything installed except for Extension Manager 6.0.7 which failed to instal. Any fix for this?

Thanks, I think the problem is solved. Previously, the CC Extension Manager failed to install when I did an update via the InDesign Help menu. InDesign CC updated successfully, however, InDesign was still acting wonky. Since downloading a new full CC Extension Manager a little while ago, InDesign seems to be working better. Is there a correlation between the two apps for future reference?

How do you turn off the auto select behavior when working with shape layers?

How do you turn off the auto select behavior when working with shape layers?
I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.

As far as i know the move tool options don't have any effect on the path selection tools.
You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
you can shift click with the Direct Selection Tool or Alt click to select the entire path.
more path shortcuts:
http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml

When working with aRGB images, what changes must be made when printing?

Working in the Adobe RGB color space requires that all components in the chain (camera, software, monitor, printer) be able to handle aRGB. When printing from Photoshop Elements, what changes (if any) need to be made at printing time?

Thanks Michel.
I knew about the "more options" dialog box and use it regularly to set
ICC profiles for my Canon Pro9500 Mark II printer, ensuring also that
"Photoshop Elements manages colors". I could have asked the question
better perhaps: "When working with aRGB images, how can I set both an
ICC printer profile for a specific paper and ensure that printer uses
the aRGB color space?". As far as I can tell, you can set an aRGB
profile (either in Photoshop or at the level of the printer), but you
can't use both the aRGB profile and an ICC paper profile at the same
time. I am assuming that you can't set an ICC profile for the paper in
Photoshop Elements and at the same time use the printer's aRGB driver.
Is that right?
Craig.

Very slow responce when working with Office file on DFS-Share

Very slow responce when working with Office file on DFS-Share
We have implemented the following configuration
Domain level Windows 2000. Two member servers with Windows Server 2008 R2, sharing the same DFS namespace with, at the moment, one folder target called Home.
Users complaining that the access to different MS Office files is very slow. Even creating a new MS Word document using right click context menu takes up to 4 minutes to open. Saving, for example, one singe Excel sheet takes also few minutes.
Tested with both, MS Office 2007 and MS Office 2010. Makes no difference. When using Office 2010 you can see the message like contacting:
\\DomainName\Root\Home\UserName. Other files like TXT, JPG or PDF are not affected.
What makes the thing really weird is the fact, that the behavior described above can absolutely change after client machine being rebooted, suddenly everything becomes very fast and this condition can revert back again just after the next
reboot.
Considerations until now:
1. This has nothing to do with the file size. Even tiny files are affected.
2. AD Sites are configured correctly and the client workstations see themselves in the correct sites.
3. This is not an Office issue. If I map my folder target not as DFS, but directly as shared network drive
\\ServerName\Root\Home\UserName , everything functions as expected
What makes me suspicious: when using f.e. TCPView to monitor connections, I can see, that each time I make any operation on an office file, there will be a connection established to one of the domain controllers, sometimes to remote ones,
located in other countries. But on the other side, even if the connection is established to the nearest DC, operations are still very very slow!
Just forget to say. All clients are Windows 7
Thanks to all who respond.

Dear all,
sorry for the delayed reply. The problem has been solved now and since September 19th. everything is functioning as expected.
What was done:
Deleted replication targets excepting the initial ones
Carefully recreated folder targets
Deleted and recreated replication groups
Disabled SNP features on both namespace servers
Created EnableTCPA registry entry
Checked that the following Updates are installed
http://support.microsoft.com/kb/2688074
http://support.microsoft.com/kb/2647452
Concering Office File validation KB2553065 - This Update was already declined on our WSUS server
Kind Regards
Eduard

Error when working with TableView using JCA

Hi sdns,
I am getting an iview rutnime error when working with Tableview using JCA. Here i am putting all my code, go thorugh it and tell me if any error is there.One more thing is Usermappping and all properties are set to system object.
Now you can throught he code which is followed by error also.
Java file.
public class DisplayComponent extends PageProcessorComponent {
 public DynPage getPage() {
 return new DisplayComponentDynPage();
 public static class DisplayComponentDynPage extends JSPDynPage {
 private JCATviewBean bean;
 public void doInitialization() {
 IPortalComponentProfile profile =
 ((IPortalComponentRequest) getRequest())
 .getComponentContext()
 .getProfile();
 Object o = profile.getValue("myBean");
 if (o == null || !(o instanceof JCATviewBean)) {
 bean = new JCATviewBean();
 profile.putValue("myBean", bean);
 } else {
 bean = (JCATviewBean) o;
 // fill your bean with data here...
 IPortalComponentRequest request =
 (IPortalComponentRequest) this.getRequest();
 doJca(request);
 public void doProcessAfterInput() throws PageException {
 public void doProcessBeforeOutput() throws PageException {
 this.setJspName("Report.jsp");
 private IConnection getConnection(
 IPortalComponentRequest request,
 String alias)
 throws Exception {
 IConnectorGatewayService cgService =
 (IConnectorGatewayService) PortalRuntime
 .getRuntimeResources()
 .getService(
 IConnectorService.KEY);
 ConnectionProperties prop =
 new ConnectionProperties(
 request.getLocale(),
 request.getUser());
 return cgService.getConnection(alias, prop);
 public void doJca(IPortalComponentRequest request) {
 IConnectionFactory connectionFactory = null;
 IConnection client = null;
 String rfm_name = "BAPI_COMPANYCODE_GETLIST";
 try {
 try {
 // pass the request & system alias
 // Change the alias to whatever the alias is for your R/3 system
 client = getConnection(request, "MyIDES");
 } catch (Exception e) {
 System.out.println(
 "Couldn't establish a connection with a target system.");
 return;
Start Interaction
 IInteraction interaction = client.createInteractionEx();
 IInteractionSpec interactionSpec =
 interaction.getInteractionSpec();
 interactionSpec.setPropertyValue("Name", rfm_name);
CCI api only has one datatype: Record
 RecordFactory recordFactory = interaction.getRecordFactory();
 MappedRecord importParams =
 recordFactory.createMappedRecord(
 "CONTAINER_OF_IMPORT_PARAMS");
 IFunctionsMetaData functionsMetaData =
 client.getFunctionsMetaData();
 IFunction function = functionsMetaData.getFunction(rfm_name);
 if (function == null) {
 System.out.println(
 "Couldn't find " + rfm_name + " in a target system.");
 return;
How to invoke Function modules
 System.out.println("Invoking... " + function.getName());
 MappedRecord exportParams =
 (MappedRecord) interaction.execute(
 interactionSpec,
 importParams);
How to get structure values
 IRecord exportStructure = (IRecord) exportParams.get("RETURN");
 String columnOne = exportStructure.getString("TYPE");
 String columnTwo = exportStructure.getString("CODE");
 String columnThree = exportStructure.getString("MESSAGE");
 System.out.println(" RETURN-TYPE = " + columnOne);
 System.out.println(" RETURN-CODE = " + columnTwo);
 System.out.println(" RETURN-MESSAGE =" + columnThree);
How to get table values
 IRecordSet exportTable =
 (IRecordSet) exportParams.get("COMPANYCODE_LIST");
 exportTable.beforeFirst();
 // Moves the cursor before the first row.
 while (exportTable.next()) {
 String column_1 = exportTable.getString("COMP_CODE");
 String column_2 = exportTable.getString("COMP_NAME");
 System.out.println(
 " COMPANYCODE_LIST-COMP_CODE = " + column_1);
 System.out.println(
 " COMPANYCODE_LIST-COMP_NAME = " + column_2);
 // create the tableview mode in the bean
 bean.createData(exportTable);
Closing the connection
 client.close();
 } catch (ConnectorException e) {
 // app.putValue("error", e);
 System.out.println("Caught an exception: \n" + e);
 } catch (Exception e) {
 System.out.println("Caught an exception: \n" + e);
Bena file
package com.sap.JCA.bean;
import java.util.Vector;
import com.sapportals.connector.execution.structures.IRecordSet;
import com.sapportals.htmlb.table.DefaultTableViewModel;
import com.sapportals.htmlb.table.TableViewModel;
public class JCATviewBean {
 public DefaultTableViewModel model;
 public TableViewModel getModel() {
 return this.model;
 public void setModel(DefaultTableViewModel model) {
 this.model = model;
 public void createData(IRecordSet table) {
// this is your column names
 Vector column = new Vector();
 column.addElement("Company Code");
 column.addElement("Company Name");
// all this logic is for the data part.
 Vector rVector = new Vector();
 try {
 table.beforeFirst();
 while (table.next()) {
 Vector data = new Vector();
 data.addElement(table.getString("COMP_CODE"));
 data.addElement(table.getString("COMP_NAME"));
 rVector.addElement(data);
 } catch (Exception e) {
 e.printStackTrace();
// this is where you create the model
 this.setModel(new DefaultTableViewModel(rVector, column));
JSP File:
<%@ taglib uri="tagLib" prefix="hbj" %>
<jsp:useBean id="myBean" scope="application" class="com.sap.JCA.bean.JCATviewBean" />
<hbj:content id="myContext" >
<hbj:page title="PageTitle">
 <hbj:form id="myFormId" >
 
 <hbj:textView id = "tv1" text = "TableView Example Using JCA "/>
<hbj:tableView
 id="myTableView1"
 model="myBean.model"
 design="ALTERNATING"
 headerVisible="true"
 footerVisible="true"
 fillUpEmptyRows="true"
 navigationMode="BYLINE"
 selectionMode="MULTISELECT"
 headerText="TableView example1"
 visibleFirstRow="1"
 visibleRowCount="30"
 width="500 px"
 />
 </hbj:form>
</hbj:page>
</hbj:content>
Error when Executing this component:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com/sapportals/portal/htmlb/page/PageProcessorComponent.
Exception id: 12:21_28/10/05_0173_94105150
See the details for the exception ID in the log file
If anybody find the error please reply to this post.
Regards,
sireesha.

Thanks for your response Martin,
I have already seen the log file but im couldn't findout anything from that since it is so long here im putting some part of please see this.if u able to find it clarify me,
Here the log file:
1.5#001321FD6213005D0000907100001CB000040419258FBF4E#1130405957843#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907200001CB00004041925916735#1130405957953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907300001CB0000404192591688D#1130405957953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD621300650000120E00001CB00004041925C953D7#1130405961625#com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory##com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory.XIManagedConnectionFactoryController.run()######04d7f690469311da8d52001321fd6213#Thread[Thread-114,5,SAPEngine_System_Thread[impl:5]_Group]##0#0#Debug#1#/Applications/ExchangeInfrastructure/AdapterFramework/ThirdPartyRoot/comsap/Server/Adapter Framework#Java###MCF with GUID is running. (,)#3#964bfca0444711dabb51001321fd6213#com.sap.engine.services.deploy.server.ApplicationLoader@1586c77#964bfca0444711dabb51001321fd6213#
#1.5#001321FD6213005D0000907400001CB000040419275B24FC#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907500001CB000040419275B25D9#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907600001CB000040419275B2E27#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907700001CB000040419275B2EFA#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD6213005D0000907800001CB0000404192924ED59#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907900001CB0000404192924EE36#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907A00001CB0000404192924F652#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907B00001CB0000404192924F710#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD621300650000120F00001CB000040419295CCD8B#1130406021625#com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory##com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory.XIManagedConnectionFactoryController.run()######04d7f690469311da8d52001321fd6213#Thread[Thread-114,5,SAPEngine_System_Thread[impl:5]_Group]##0#0#Debug#1#/Applications/ExchangeInfrastructure/AdapterFramework/ThirdPartyRoot/comsap/Server/Adapter Framework#Java###MCF with GUID is running. (,)#3#964bfca0444711dabb51001321fd6213#com.sap.engine.services.deploy.server.ApplicationLoader@1586c77#964bfca0444711dabb51001321fd6213#
#1.5#001321FD6213005D0000907C00001CB0000404192AEEB1E2#1130406047953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907D00001CB0000404192AEEB2C0#1130406047953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907E00001CB0000404192AEEBAD8#1130406047968#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907F00001CB0000404192AEEBB9E#1130406047968#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#

Problem with Ai when working with a logo (I just can´t move the logo quickly from one point to another) Help!

Hi there, Hope everyone is well. I have troubles with my Ai when working with a logo, I just want to move it from one point to another and it gets pretty slow to be moved. I am working on a brand new iMac and this problem surprises me a little bit. Do you know why is this happening? I get de Ai from the Creative Cloud...could it be the internet?

Thnks rcraighead, glad to know about how CC runs. The logo was before a jpg then our designer transform it into vectors but today we were working she found complicated to move the image, it takes secooonds to make it move either from the keyboard or the mouse. I will ask her to see the symbol option, I think she is working with several logos (in vectors) at the same archive...so let see. Thanks buddy! I will be back with a screenshot

Disable updating of the menu widget when working with Muse file?

First of all thank you Adobe for creating Muse - I really like it a lot!
My question:
when I work on my website with 250+ pages, it strains the performance to make even the slightest changes to the page structure. I work with two Masters each with much the same horisontal menu widget.
Adding, deleting and rearranging pages makes the PC (Windows 7 laptop of some but not awesome power) make a halt and take a deep breathe for some seconds. It really interupts the flow of working.
A crude work around for this is to removing the menu widget in the two masters and put it into a new master page, containing only the copied menu from the two other masters and keeping the rest of the header in place on the original masters to use for aligning on the pages. This way, only one page has to update when working with adding, deleting and rearranging pages.
I have tried to look for a preference to disable updating the Menu widget when working on the page structures and just enable it the update again when the work is done? does it exist? else I would recommend it strongly :-) Since my work around is a bit tricky/risky to use after publishing ;-)
Again, thanks a lot for this nice program. Being a selftought CS (now CCC) user I like the ease of control of the webdesign you can get with Muse (at the dispence of other features of course - if you ever wanted to add some sort of database-lookup feature it would be MUCH appreciated. One workaround is to use iframe and an external search/lookup page, that returns results with links back to parent pages. A bit funny construction though :-) ).
BR
M. Hecquet

Glad to know you are enjoying Muse.
It can be very processor intensive if you have multiple Master pages with their own All Pages menu widget. Take a look at the following threads and refer to Zak's response.
http://forums.adobe.com/thread/1423767
http://forums.adobe.com/message/6166722
See if you are able to use just one All Pages menu widget at your site while taking advantage of the hierarchical Master page feature.
http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-hierarchical-master-pages/
We are aware of the performance issues caused by the Menu widget (All pages type) and is something being looked upon by the engineering in one of the upcoming releases.
Thanks,
Vinayak

How to get exact match when working with Oracle Text?

Hi,
I'm running Oracle9i Database R2.
I would like to know how do I get exact match when working with Oracle Text.
DROP TABLE T_TEST_1;
CREATE TABLE T_TEST_1 (text VARCHAR2(30));
INSERT INTO T_TEST_1 VALUES('Management');
INSERT INTO T_TEST_1 VALUES('Busines Management Practice');
INSERT INTO T_TEST_1 VALUES('Human Resource Management');
COMMIT;
DROP INDEX T_TEST_1;
CREATE INDEX T_TEST_1_IDX ON T_TEST_1(text) INDEXTYPE IS CTXSYS.CONTEXT;
SELECT * FROM T_TEST_1 WHERE CONTAINS(text, 'Management')>0;
The above query will return 3 rows. How do I make Oracle Text to return me only the first row - which is exact match because sometimes my users need to look for exact match term.
Please advise.
Regards,
Jap.

But I would like to utilize the Oracle Text index. Don't know your db version, but if you slightly redefine your index you can achieve this (at least on my 11g instance) :
SQL> create table t_test_1 (text varchar2(30))
2 /
Table created.
SQL> insert into t_test_1 values ('Management')
2 /
1 row created.
SQL> insert into t_test_1 values ('Busines Management Practice')
2 /
1 row created.
SQL> insert into t_test_1 values ('Human Resource Management')
2 /
1 row created.
SQL>
SQL> create index t_test_1_idx on t_test_1(text) indextype is ctxsys.context filter by text
2 /
Index created.
SQL> set autotrace on explain
SQL>
SQL> select text, score (1)
2    from t_test_1
3   where contains (text, 'Management and sdata(text="Management")', 1) > 0
4 /
TEXT                             SCORE(1)
Management                              3
Execution Plan
Plan hash value: 4163886076
| Id | Operation                   | Name         | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT            |              |     1 |    29 |     4   (0)| 00:00:01 |
|   1 | TABLE ACCESS BY INDEX ROWID| T_TEST_1     |     1 |    29 |     4   (0)| 00:00:01 |
|* 2 |   DOMAIN INDEX              | T_TEST_1_IDX |       |       |     4   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   2 - access("CTXSYS"."CONTAINS"("TEXT",'Management and
              sdata(text="Management")',1)>0)
Note
   - dynamic sampling used for this statementJust read that you indeed mentioned your db version in your first post.
Not sure though if above method is already available in 9i ...
Message was edited by:
michaels

Incredibly Long Lag Time When Working With Effects in Premiere Pro CC 2014

I am having incredibly long lag times when working with effects in Premier Pro CC 2014. Like 60 seconds or more. This also happens periodically when I am doing something as simple as cutting into a timeline (just ripple deleting from and in to an out point).
I have a MacBook Pro running OSX 10.9.4 2 GHz Intel Core i7 with 16 GB 1600 MHz DDR3.
I have seen that some people are having different versions of the same problem. I do have RedGiant plug-ins, but I am not using any of them in this project. The Red Giant plugs (again, not being used in the project) include MOJO and Universe. The previous version most certainly did not work like this. Any ideas? I did try moving the Red Giant plugs out of the COMMON folder and "alt" starting up to reset preferences. Still having same problems.
A specific example is I have an interview shot. I add brightness and contrast. Just making a change to the effect (increasing brightness) causes freezing of the interface and long delays. I added a piece of transparent video on a top layer to add a CIRCLE to create a vignette effect. Same deal -- ridiculously long times for effect changes to take place.
Does anyone have any clues as to how to fix these problems?
THANKS FOR ANYONE'S HELP!!!!!!!

Got the same Error. Previous I worked with a GTX 760, and was hoping to get it fixed with using a GTX 780 6GB. But just as you, didn't solve the Problem.
Usually I got the Problem solved, with exiting Premiere, restarting it, reset my Workspace. Then the Problem of having the bugged Workspace was gone. And also the Problem of the missing Video Tracks.
At the moment I started on a new Project. Pretty simple, with only a 21 second DV footage. And here I was switching tabs with my Browser, came back to the Project, and the Video Tracks were gone. I saved, closed Premiere, restated and the Video Tracks are still missing.
So I made a new Sequence, voilá the Video Tracks are there. Thus I need to copy and paste the Tracks onto the new Sequence.
But that is not really a solution!
I was on the Phone with Adobe, and on Chat, but they couldn't help me. They suggested to get a Tesla or Quadro Card, or at least a GPU that got confirmed as working on their page. I did that, but obviously, that is not the issue.

Date/Time erros when working with Database Connectivity toolkit

Hi!,
We are observing errors with date/time when working with LV. The error occurs when the system datetime format is set such that day precedes month (e.g. dd/mm/yyyy). Our VI uses LV 7.1, Database Connectivity 1.0 and SQL Server 2000 on a Win2000 machine.
Problem details
Our database in SQL server has a table having columns with data type "datetime"
If the system date format (as set in control panel) is "mm/dd/yyyy", the 'insert into database' vi works fine. This function inserts the date and time (among other things) into the above mentioned table.
However, when the system datetime is set to dd/mm/yyyy we start receiving error that date and time is beyond range for dates in which the date had the day field greater than 12 (e.g. 23/10/2005). With the same settings, if the date is such that day field is equal or less than 12 (e.g. 03/10/2005), we do not receive an error but the date is interpreted as 10 March 2005 rather than 03 September 2005.
Clearly LV (or is it SQL) is mistaking the day field as month.
We have taken care that when sending and receiving date, the format date and time string is set as per system settings.
Thus, if system setting is "dd/mm/yyyy" our format string is "%d/%m/%Y"
And if the setting is "mm/dd/yyyy" our format string is"%m/%d/%Y"
Any help on problem cause and cure is welcome.
Thanks,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Hi Xu,
You answer led me to some very interesting fact finding on how SQL server handles date and time. I have attached a zip file which contains webpages that throw more light on this issue.
The attached pages tell me that SQL has an inbuilt date/time reference format. The default in mm/dd/yyyy. Which explains why my VI worked when I used that format to write to SQL.
However there is a catch:
SQL expects the date/time to be in its inbuilt reference format when you WRITE data to SQL. If the date/time is in a different format, better tell SQL about it by using say the SET command you mentioned.
BUT what about the date/time format when you are reading data from SQL?
Our finding is that SQL sends date/time string in the system date format when you READ from SQL !!! That is very surprising behaviour (why differentiate between write and read?).
Is our finding correct?
So, we adopted the following simple strategy (yet to be fully tested):
1) Whenever we write date/time to SQL, the string is formatted as mm/dd/yyyy. Presently, the user's SQL server is in the default state. Caveat is that if the user changes SQL date/time from default (which is mm/dd/yyyy) to anything else, our software will give errors. But then he changed it ;-)
2) When we read date/time from SQL we format the string as per system date/time format.
I know this is not very robust coding. But assuming the user keeps his SQL in the current setting, should we expect smooth working?
In other words, are there any errors and/or flaws in our strategy?
Thanks,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Crashing, no 'UNDO' when working with Chinese Text

We have a number of users working in InDesign CS4 6.0.3 on Windows XP SP3. When they enter Chinese text into text boxes, frequently their UNDO command is no longer available. This basically renders files unusable. In addition to this, the application will frequently crash when working with Chinese text. The only workarounds that have sometimes worked include:
1.       Switching keyboard mapping or just selecting English to see if it affects the Undo function.
2.       Reset the preferences for InDesign.
3.       UNDO problem occurred when jumping between web browser and InDesign. Workaround was to select a menu item from within InDesign - any menu item, it didn't matter - and the key command began working again.
Has anybody else run into these problems?

Peter, have you had any problems accessing the web pages for the Release Notes? After finally digging under about 3 layers of redundant links (annoying in and of itself), the final links to Release Notes for InDesign patches 6.0.4, 6.0.5, and 6.0.6 brought me to the following:
InDesign 6.0.4 took me to InCopy 6.0.5
InDesign 6.0.5 took me to InCopy 6.0.6
InDesign 6.0.6 took me to InDesign Server CS5
I got approval to install all patches on a person's computer, but now I can't even read the warnings before doing so!

Dreamweaver CC constantly crashing when working with BC

Hi,
Dreamweaver CC is constantly crashing when working with BC. I had lots of contact with the support, my issue is at tier2 already, I had telephone-support several times, we had lots of possible solutions. Nothing worked.
DW CC is crashing as often as CS6 did and it only happened when working with a BC-site. Whenever uploading to BC, there is a 30% chance that DW crashes. When having stopped working with DW for a few minutes (like doing something in PS) DW crashes in every case. 100%. As this must have something to do with BC, I urgently beg to check the integration of BC into DW or check the connection-mode.
Here are my Specs:
- iMac with latest OS
- Adobe CC (latest )
- German
-DSL 1500 b/sec-connection
I tried saving the sites root folder on a NAS and on local harddrive. I tried with or without german Umlaute , no difference.
Sometimes I can cancel the upload-message and redo, then its working (75%).
As I seem to be the only one having this problem, I completely reinstalled the system and CC, but the problem still exists.
I would really appreciate any help or support from Adobe, although I must say, they already did a lot, but unfortunately my problem is not solved.
By the way, several dialogs with "dont show message again"-ckeckboxes simply come again, no matter whether box is checked or not.
Writing uppercase I (shift-I) insert content of clipboard and writes an uppercase I. (weird?)

I have had the same problem.
Had Dreamweaver support on the phone yesterday, after receiving this email:
Please try resetting the preferences for Dreamweaver. Follow the steps given below.
/Users/Your User Name/Library/Preferences/Adobe Dreamweaver CC Prefs
/Users/Your User Name/Library/Preferences/com.adobe.Dreamweaver.13.0.plist
/Users/Your User Name/Library/Application Support/Adobe/Dreamweaver CC
/Users/Your User Name/Library/Application Support/Caches/ com.adobe.Dreamweaver.13.0
Macintosh /Library/Preferences/ Application Support/Adobe/Dreamweaver CC Prefs (if any)
Macintosh /Library/Preferences/com.adobe.Dreamweaver.13.0.plist
Note: Follow the help doc to access user library.
If this does not help can you please send me details below to isolate the issue further.
1)      Step by step workflow to reproduce the issue.
2)      Is this happening with multiple files? Few sample files to test the issue at my end.
3)      Complete System Information file of the computer having issues.
4)      Were there any H/w or S/w changes applied on the computer having issues. Since when are you getting this issue?
5)      Is the user on domain account or local user? Do they have admin rights?
6)      You BC site details, including FTP address, Login credentials.
After our telephone conversation:
I deleted all sites.
I have completely deleted all versions of Dreamweaver, deleted all preference files and reinstalled Dreamweaver CC.
It's still happening, so I will be back to them tomorrow.
Sorta glad it's not just me!!

Aperature crashed after 3.3 update. I am a novice at best when working with restore functions. Any suggestions on how to fix this problem?

I had the 3.3 update window with Aperature pop up and say that I could no longer work with my library until updating Aperature. The update froze up about 90% through the completion of the last set(9 of 9/ 90% complete) and ran over night. My MAC shows version 3.3 installed. When I try to open Aperature, I get a system crash error. I am a novice at best when working with software and I am panicing because of the amount of pictures that I have on the system. I do back them up but do not know how to restore Aperature software(I purchased it before the app store and can not find it). Please advise.

There is an Aperture forum that you can repost in, that is where you will find the guru's for that product. Simply click: Aperture to get there. BTW before you do please complete your profile, it makes it much easier for those attempting to assist you. You can find instructions by clicking Profile Update

Win7-64 Photoshop CC blank Save As dialog, then crash, when working with video / frame animations

Hi, I recently updated to CC from CS6 and am having issues when working with PSDs containing video layers, or are set up as frame animations: When attempting to Save As, the dialog will be completely blank except for the Save and Cancel buttons.   If I press cancel, then return to Save As, CC then often crashes.
Here is the Error Event from Event Viewer:
Faulting application name: Photoshop.exe, version: 14.0.0.0, time stamp: 0x5176451b
Faulting module name: MediaCoreIF.DLL, version: 7.0.0.0, time stamp: 0x51573a21
Exception code: 0xc0000005
Fault offset: 0x00000000001fca98
Faulting process id: 0x750
Faulting application start time: 0x01ce9e1925a5045b
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Photoshop.exe
Faulting module path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\MediaCoreIF.DLL
Report Id: db6d5f8f-0a0c-11e3-9df9-0026b9cc01d1
So far I am only having these issues if I have been working with video layers and then frame animations. Frame animations in particular seem to cause instability as I can often work with video layers all day without a problem. Then if I import video frames to layers, or open a PSD containing a frame animation, the Save As may not necessarily work.
Sometimes closing and restarting Photoshop will allow me to save again, but then sometimes a whole system reboot is required. It is only temporary though.
I am not running antivirus software or other apps aside from what starts at boot.

Frustrating that this thread has petered out, since I'm having the exact same issue. Did you ever find a way to improved stability?
Also of note, the issue followed me across machines. Two weeks ago I purchased a new machine, figured if that didn't solve the problem nothing would... It didn't. :\
The only similar factors are that the machines both are 64bit Windows 7 (a fresh OEM install on the new box) and have nVidia-brand graphics cards. (Again, though - not the SAME graphics card, picked up a new one with the new machine.) No drive cloning was involved: this is completely new hardware, a fresh factory install of Windows 7, different antivirus (went from AVG to Avast), and new download of Photoshop CC from CreativeCloud.
Looks like our event details are quite similar, too.
Log Name:
Application
Source:
Application Error
Date:
4/6/2014 1:57:39 PM
Event ID:
1000
Task Category: (100)
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
REDACTED
Description:
Faulting application name: Photoshop.exe, version: 14.2.1.570, time stamp: 0x52f4a9f2
Faulting module name: MediaCoreIF.DLL, version: 7.0.0.0, time stamp: 0x51573a21
Exception code: 0xc0000005
Fault offset: 0x00000000001fca98
Faulting process id: 0x1ca4
Faulting application start time: 0x01cf51c68639ec43
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Photoshop.exe
Faulting module path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\MediaCoreIF.DLL
Report Id: 5268f22b-bdbd-11e3-b9df-d850e65afc6f

Select/transform tool changes to pan tool when working with text

Similar Messages

Maybe you are looking for