Select WBS elements with the extension u201C.DRLu201D (i.e. DL000001.DRLu201D)

Hi All.
In my report requirement I need to get the data with Extn .DRL like, How to get in report. and excluding cost elements 5000994-5000999 like this.
Please help me out.
Thanks in advance.
Durga

restrcit single value like %DRL from left to right pane and second one also restrict the value range and exclude the selection

Similar Messages

Projects/WBS elements with the editing mask A still exist.

Hi All,
I am trying to create a New Coding Mask with Project ID "A" in Dev client 100. ( Ex: A.0000.XX)
But System is giving an error says that"There are still projects or WBS elements with edit mask A in the system. Therefore you cannot change them".
But there is no WBS or PD's with this coding mask existing in development client 100.What to do?Is there anyone faced this problam earlier?Any refresh activity required for this?
Thanks in Advance!
Thanks
Suresh Kumar.

Hello,
You need to check whether there are any projects in the system starting with "A" using CNS41. If at all there are any project existing in the system which starts with "A" then the system wont allow to create coding mask which starts with "A"
You can try to delete these project if possible and then try out if the system allows you to create the coding mask.
Thanks and Regards,
Anish

Possible to show the WBS element in the down payment request?

Hi,
We have a

Hi,
We have a Plant maintenance order with a WBS element.
We have created a PO for a vendor. The WBS element is not shown on the PO.
Is it possible to show the WBS element on the down payment request of that vendor?
Thank you for your feedback.
Kind regards,
Linda

How to select WBS element of Level2 on Report Painter

Dear PS Masters.
I made project which has 3 levels.
I want to see the result of only level 2
on the report of report painter.
However, when I select WBS element of level 2,
the report shows level2 and level3 together.
So, I want to exclude the result of level3 from the report.
In order to solve it,
I tried to uncheck the checkbox of "INCL.HIERARCHY" on Database Profile.
But, even though I uncheck it on IMG, SAP check the checkbox automatically again.
Pls give your advice.
BR
Y.Kaneko

Raghu,
Thanx for your info.
On the report of CJE0, I could find the hierarchy button.
This is the one what I want!!
But, I'm wondering that how can I show this button on the
report which I made by report painter GRR2.
Pls give advice.
BR
Y.Kaneko

How to remove an selection screen element at the event

hi,
can any one tell me how to remove / Disable an selection screen element at the runtime after an event occurs like selection of Value from a parameter.
Thanks and Regards
Guhapriyan Subrahmanyam

TABLES : BKPF.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_BUKRS LIKE BKPF-BUKRS OBLIGATORY.
"Company code
SELECT-OPTIONS : S_BELNR FOR BKPF-BELNR MODIF ID M01.
"Accounting Doc No
PARAMETERS: P_GJAHR LIKE BKPF-GJAHR MODIF ID M02.
"Fiscal year
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON S_BELNR.
IF S_BELNR IS NOT INITIAL.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'M02' .
SCREEN-INVISIBLE = '1'.
MODIFY SCREEN .
ENDIF.
ENDLOOP.
ENDIF.

How to find the WBS element for the payment document?

Dear All,
How to find the WBS element in the payment document?...I know in payment doc there will not be any WBS but is there any option where I can find in any of the Tables.
I am in the process of developing a Z report where i need to fetch the payment documents based on WBS. Can any one please help me on this.

Hi Ram,
As you are not giving any input of WBS at the time of payment you cannot fetch this directly. But to know the WBS for the reporting purpose on which WBS the payment has been made, you can develop a Z-Report. The WBS elements of clearing documents against the payment entry can be fetched out.
In this report if there is a single payment against many invoices also possible with different invoice and WBS elements to be displayed on the Z-Report
Regards
Divya S

How to Return the Index of a Mouse-Selected Array Element in the View Interface of Diadem

Hello,
Does anybody have an idea of how to obtain the index of a mouse-selected array element in the View interface of Diadem??
Thanks!

Hi Ovidius,
Keep explaining. The only way I know of to trap a selected cell value in VIEW is to embed into the desired VIEW area a second non-modal SUDialog that has a Table control or an XTable control displaying the values of certain data channels. There are callbacks in both table controls for cell selection, and you can configure the table control to allow only single cell selection if that's what you want. The regular table control will be easier to program, but the XTable control will perform much better for larger channels.
But what happens with that value the user selected? Is it used for a calculation? Is it added to a report? Why would the user select that cell in a table rather than selecting the corresponding feature in a graph with the crosshair cursor?
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Someone is changing elements with the Dev tools on my computer how do i reverse the changes

i am new to computers you could call me technically retarded sometimes my pages are padded and sometimes they dont work at all this part or that will be missing or i will get a ridiculous redirect i really dont understand it but im reading about it in the forums
please help me it seems a touch suspicuous there are things encrypted with 256 encryption hidden photos and all kinds of other stuff
sincerely
James r fair
Portland Or
SalpareBay Marina
8/30/2014

Unknown property '-moz-border-radius'. Declaration dropped. 0:1
Unknown property '-moz-border-radius-bottomleft'. Declaration dropped. 0:1
Unknown property '-moz-border-radius-topleft'. Declaration dropped. 0:1
Expected 'none' or URL but found 'alpha('. Error in parsing value for 'filter'. Declaration dropped. 0:1
Unknown property '-moz-box-shadow'. Declaration dropped. 0:1
Unknown property '-moz-border-top-left-radius'. Declaration dropped. 0:1
Unknown property '-moz-border-top-right-radius'. Declaration dropped. 0:1
Expected color but found 'top'. Error in parsing value for 'background-image'. Declaration dropped. 0:1
Expected media feature name but found '-webkit-min-device-pixel-ratio'. 0:1
Error in parsing value for 'image-rendering'. Declaration dropped. 0:1
Expected color but found 'none'. Error in parsing value for 'background-color'. Declaration dropped. 0:1
Error in parsing value for '-moz-transition'. Declaration dropped. 0:1
Error in parsing value for 'transition'. Declaration dropped. 0:1
Unknown property 'zoom'. Declaration dropped. 0:1
Expected color but found 'right'. Error in parsing value for 'background-image'. Declaration dropped. 0:1
Expected color but found 'bottom'. Error in parsing value for 'background-image'. Declaration dropped. 0:1
Expected color but found 'left'. Error in parsing value for 'background-image'. Declaration dropped. 0:1
Unknown property '-moz-background-size'. Declaration dropped. 0:1
Expected color but found 'auto'. Error in parsing value for 'border-left'. Declaration dropped. 0:1
Error in parsing value for 'border-right'. Declaration dropped. 0:1
Unknown pseudo-class or pseudo-element '-ms-clear'. Ruleset ignored due to bad selector. 0:1
Unknown pseudo-class or pseudo-element '-webkit-scrollbar'. Ruleset ignored due to bad selector. 0:1
Unknown pseudo-class or pseudo-element '-webkit-scrollbar-button'. Ruleset ignored due to bad selector. 0:1
Unknown pseudo-class or pseudo-element '-webkit-scrollbar-corner'. Ruleset ignored due to bad selector. 0:1
Unknown pseudo-class or pseudo-element '-webkit-scrollbar-thumb'. Ruleset ignored due to bad selector. 0:1
this is my gmail
rocky fair
portland or
On Sat, Aug 30, 2014 at 12:32 PM, Mozilla Support Forum <[email protected]> wrote:
Mozilla Support
someone is changing elements with the Dev tools on my computer how do i reverse the changes
cor-el Aug 30, 2014 5:32:47 AM
Can you attach a screenshot?
http://en.wikipedia.org/wiki/Screenshot
https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot
Make sure that you do not exceed the maximum size of 1 MB
This isn't done via the developer tools, but more likely by an extension or security software.
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
Hold down the Shift key and left-click the Reload button
Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
Press "Command + Shift + R" (Mac)
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
Do NOT click the Reset button on the Safe Mode start window
https://support.mozilla.org/kb/Safe+Mode
https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Mark it as solved This doesn't solve my problem
Browse for unsolved questions and help a Firefox user
Solving 1 issue helps up to 1,000 users a day!
This email is automatically sent by a robot. Our robot can’t respond to your question, but our forum contributors can! If you want to respond to them, please click here.
Change your email preferences
Unsubscribe from these emails

How to open a file with the extension x3f (sigma)

how to open a file with the extension x3f (sigma)?

RAW data from the following Sigma cameras is currently supported:
DP1
DP1s
DP2
SD9
SD10
SD14
If your camera is among these, then simply import the photo as usual. https://helpx.adobe.com/lightroom/help/importing-photos-lightroom-basic-workflow.html

I can't watch a video with the extension mpg or avi or anyother one using flexplayer for my ipad. Which player i can download to watch the videos that i receive in my email?

I can't watch a video with the extension mpg or avi or anyother one using flexplayer for my ipad. Which player i can download to watch the videos that i receive in my email?

Unfortunatelly, something’s not working fine on Flexplayer during the last cupple of months. A lot of updates have been released lately and the problems persist. Since iOS 6 was on the air, the problems became even worst. It’s a shame, but I think it’s time to change the app we are using. The alternative I found is 8Player, it works fine, similar to Flexplayer (but nicer interfase), and the best is that it supports “.flv” (not sure Flexplayer did). You can save your files to your hard disc using iTunes and then transfer them again to your idevice, once you’ve installed 8Player. I hope this helps. Bye bye Flexplayer!!

I want to add image name with the extension to db after upload, Can any body help?

Hello there,
Earlier in the week I created PHP photo/image upload form so clients will be able to upload to my site, it worked very well uploading image to designated directory to the C:/path/ but there is more that I would like to do with the form, and that is to write the image name with the extension, “Joplateau.jpg” for example in the database after upload. I wanted to use hiddenField but it's not working for me, may be i am not doing it right. If any one has an idea how to do this please let me know, and thanks in advance.
Thanks in a lot.
Joplateau.

Server-side coding questions are best answered in the Application Developers forum:
http://forums.adobe.com/community/dreamweaver/dreamweaver_development?view=discussions
Nancy O.

I want to add image name with the extension to db after upload in PHP, Can any body help?

Hello People!
Earlier in the week I created PHP photo/image upload form so clients will be able to upload to my site, it worked very well uploading image to designated directory to the C:/path/ but there is more that I would like to do with the form, and that is to write the image name with the extension, “Joplateau.jpg” for example in the database after upload. I wanted to use hiddenField but it's not working for me, may be i am not doing it right. If any one has an idea how to do this please let me know, and thanks in advance.
Thanks a lot.
Joplateau

Server-side coding questions are best answered in the Application Developers forum:
http://forums.adobe.com/community/dreamweaver/dreamweaver_development?view=discussions
Nancy O.

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

By doing a Google search.

SELECT FOR UPDATE with the SKIP LOCK clause

Hi,
I have a query regarding the SELECT FOR UPDATE with the SKIP LOCK clause.
Whether this will be really good for parallel processing.
Also if we are selecting a set of records in a cursor whether the lock will be done at the records level once we fetch the records?
Also do we have any known issues with this one?
We are trying to figure out whether this will fit for business requirement, we are trying to do a implement a threading kind of thing for our stored procedure invocation in background using shell script.
Any suggestion or feedback on this will be helpful for us.
Thanks a lot for the support given....
Regards,
Basil Abraham.

http://www.oracle.com/technology/oramag/oracle/08-mar/o28plsql.html
Please read the above thread for few information...Thanks!

How can I find the element with the closest value to a calculated "target value" in a 1D array?

Hello all,
may be the following question is very simple, but I am relatively new in labview and it would be great if somebody could help me:
I have a acquaried 1D array of data-points. Now, I have to find the element in this array which value is the closest to a calculated "target value".
After finding the element with the value close to the "target value", I have to get the position of this element (i.e. the index) in the 1D array.
Now, I have to use this index to find and extract the element at this position in an other 1D array.
It would be very nice if somebody could help me with this problem.
Thank you,
beam

Find attached a sample vi that you can modify.
Attachments:
select_target_value.vi ‏22 KB

Select WBS elements with the extension u201C.DRLu201D (i.e. DL000001.DRLu201D)

Similar Messages

Maybe you are looking for