'Select WLAN Network' every time I boot! Grr.

I can't wait to get rid of my Nokia E71 - the most infuriating, badly designed, buggy piece of technology ever 'created' (more like shoved into existence). In the meantime I am stuck with it on contract, and have one (well 15) particularly annoying bug:
Every time it boots, it says 'Select WLAN Network'. Of course the geniuses at Nokia do not tell you what application is requesting this, or why, and no matter how many times I select my home network, and enter the WPA key (which is already saved as the default access point anyway as well as already being connected via VoIP), it asks me again and again every time I reboot.
If I am out of WLAN (it's called Wi-Fi Nokia BTW) range, it gives a 'No WLAN Network Found' error on boot instead, and forces me to press OK. Absolutely waste of time.
Can you advise how to remove this one-aggravating-annoyance-too-many-feature please?
If I email Nokia support, they just tell me to take my phone to my nearest service centre. I will do one day, and shove it up their ~~~TRANSMISSION ENDS

What provider are you under contract with? As my E71 certainly does NOT do what you describe. I have seen on these forums that the provider 3 (or someone else) has custom firmware that apparently attaches to the network all the time for some reason. The posts I have read so far do not mention anything happening like yours so I am unsure what is going on.
E71-2 Grey Steel
type: RM-357 code: 0569371 FW: 410.21.010
08-02-2010 Nokia E71-2 (236.06)

Similar Messages

Imac loose airport network setting like password every time i boot...

Hi everybody,
maybe someone can help me. I use a imacg5. I connect via airport extreme to an avm router. I use WPA. Every time i boot my imac, there is no connection to the router. I have to go to internet connection, choose a "other" network, type in a new name for the network, switch to WPA and enter my password. After that everything is fine and works until i rebbot the machine. After that, the network is gone and i have to make one again. This only means, i have to do that under the airport icon at the top of os. Under preferences, network there is still the connection with correct password, but the imac will not use it. Also there is no possibility to save my password. My qestion is: how is it possible to save my network, encryption and password. Liek i told, under preferences everything is fine, the connection stays there after reboot. Only the internet connection will lost all settings. Maybe anyone can help, i´am a new mac user too, owning my imac only for 3 months (cannot believe, i worked so much years with a pc)...
Thanks a lot

this was a user problem, my adminstrator account was gone

Every time i boot up, i still have 3 or 4 windows open

how do i close the open windows, so they don't open up every time i boot up

Dealing With The Resume Feature of Lion
Managing Mac OS X Lion's application resume feature.
If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
chflags nohidden ~/Library
Press RETURN. Quit the Terminal application.
In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it.
Disable Lion’s Resume Checkbox When Shutting Down [Video How-To] | Cult of Mac
Also, open General preferences where you will find a couple of checkbox options.

Why am I asked to join a WiFi network every time i open my computer?

Why I am asked to join a WiFi network every time I open my computer?

Make sure your Mac is up to date with all Apple Software Updates.
Then:
Go to System Preferences > Network. Select Wi-Fi or AirPort from the left column. Click the Advanced... button.
Under the Preferred Networks list, select every Wi-Fi network that appears, including the one you want to use, and delete every one using the "–" (minus) button. Select the box "Remember networks this computer has joined" if it is not already selected.
OK then Apply.
Select your wireless network in your Mac's Wi-Fi menu, provide your wireless network password, and determine if that solves its connection problems.
If the above does not resolve the problem, follow the steps in these Apple Support documents:
OS X: Wi-Fi: How to troubleshoot Wi-Fi connectivity

Software Update Runs Every Time I Boot Up

As soon as I updated OS X to 10.5.8, the Software Update runs every time I boot my MacBook. This occurs even though the "Check for Updates" option is NOT selected (in System Preferences|Software Update).
This indicates (to me) that, since Software Update is not working properly, I can no longer trust that my machine has the current updates.
Any ideas???

It's probably in your login items. Launch Software Update, right-click its Dock icon, and ensure +Open at login+ is unchecked.

How to see all image types when saving an image without selecting "all files"every time

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/951766]]</blockquote>
Hallo, and thank you for reading this.
I am a person who saves a lot of images online and renames them in different folders in different names like B - 34 or G - 56. I have been working with firefox 10 for quite some time and it had a pretty handy bug (I guess) where I could save an image and firefox would just save the image in it's original type (JPEG,PNG etc) while "save as type" was empty.
It also always has shown all the image types in the folder where I save the images (except for GIF) and that helpes me quite a lot by saving me the trouble of selecting "all files" every time I save or going to the folder to rename every image.
Now this seems to be lacking in the newest firefox versions and my question is if I can set firefox to always show me all the image file types when saving an image, instead of only showing JPEG's when I try to save a JPEG.
Thank you for your time.

I suspect this is a Windows problem. I am surmising the FilePicker uses the Operating System or Desktop facilities. Does Windows 7 offer any other file categories like ''images'' ?
I do not normally use Windows 7, but may the option depend upon the directory being an indexed one, I ask after finding this thread ''Bring File types tab back'' [http://www.windows7taskforce.com/view/819]
This question is a duplicate of [/questions/951764]
Normally I would lock the duplicate question, but in this instance I will leave it open as it is unanswered and someone may give a better reply.

Every time I boot my laptop i get a message 'The Procedure entry point-NSConcreteStack could not be located in the dynamic link library CoreFoundation.dll.

The Procedure entry point-NSConcreteStack could not be located in the dynamic link library CoreFoundation.dll.
I get this message every time I boot my laptop...I have uninstalled itunes and all its files and re installed three times....exactly the same result

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

After resetting my backbook pro to factory settings, it freezes every time it boots up. What's the problem?

After resetting my backbook pro to factory settings, it freezes every time it boots up. What's the problem?

by the way, you can also try to safe boot up your mac for safe mode. maybe it can work and you can deal with problem there.
for safe boot:
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).

Lose network every time i try call???? help.

Lose network every time i try call???? help.

dear App support,
this problem happen with thaousand of pepole and give nigative rate for Iphone and open the market for Sa

IPhoto starts every time we boot our MBP

iPhoto starts up every time we boot our MBP from a full shutdown. How do we make it stop?
Thanks!

Since you are learning, when you right-click or ctrl-click on a dock icon, you will get a contextual menu. One of the Items is to have the program start at login. You may have accidentally done this with iPhoto which may explain how it got into the login items.

How do I make my selected Persona appear every time Firefox opens?

In an earlier Firefox version, my favorite selected Persona always appeared at the top every time I opened Firefox. I now have version 4.0.1. What can I do so a Persona is automatically shown? In other words, I'm getting tired of selected a Persona every time I open a new Firefox page, so is there a setting within Firefox 4.0.1 to automatically show the Persona used in my prior Firefox window?

If you lose the toolbar customization then you do not have a problem with places.sqlite, but with the file localstore.rdf in the [[Profiles|Profile folder]].
* http://kb.mozillazine.org/Corrupt_localstore.rdf
Use the Google cache in case of problems accessing the MozillaZine KB (prefix links with cache:):
*http://www.google.com/search?hl=en&ie=UTF-8&q=cache:http://kb.mozillazine.org/Corrupt_localstore.rdf

Satellite Pro 6100 shows a message 'Built-in HDD Password' every time I boot it up

Hello, my computer is showing a message "Built-in HDD Password" every time I boot it up. I've never set any passwords on the hard disk in the past, though in desperation of trying to get the laptop running, I have tried all the possible passwords but theres no answer, I would appreciate any help/advice. what do I have to do?

as I said before, I need the information that's in the Hard disk. I'm trying to acces the HDD via a usb2.0 IDE adapter, but the computer doesn't recognice the hardware, so I'm lookin for the driver, does any body know where can I get it?
bye

Every time I boot, nether in OSX or windows I get a screen the same as the boot screen just with a buffering wheel. Please Help.

Hello,
I'm currently in mac recovery. I have a 21.5'' iMac (I think late 2011). I'm running OSX mountain lion and I think its kept up to date. Every time I boot, nether in OSX or windows I get a screen the same as the boot screen just with a buffering wheel (not the beachball one). This seems to go on for ever (at least 3 hours) ant will not boot. Booting in safe mode does not work and results in the same problem. As I said earlier I can get tom recovery mode. Thanks Oliver.
I have on/for my machine:
Mac OSX mountain lion
Windows 7 Pro 64bit
4GB of ram
OSX 10 FULL backups (External 2TB drive)
500GB HDD
Please ask if you would like more Information.

Hello, disconnect any external drives for now.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Why do I have to select "continue allowing" every time I visit certain sites in order to be able to type into flash based form fields?

Why do I have to select "continue allowing" every time I visit certain sites in order to be able to type into flash based form fields?
See attached image for reference to what button I am referring to. Until i hit the "continue allowing" button I can not type into the form fields. I have tried removing and reinstalling flash. refreshing firefox, and clearing cache and cookies, and deleting the permissions.sqlite file. Nothing has worked. This issue just started happening a few days ago. Please let me know what I might be able to do to fix this.

That full page including the form is a Flash object.
I didn't see this doorhanger opening when I tried the URL in a new profile.
Did you previously created an exception or is the default selected if you check the permissions for the Flash plugin?
You can inspect and manage the permissions for the domain in the currently selected tab:
*Click the "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location/address bar
*Click "More Information" to open "Tools > Page Info" with the Security tab selected
You can go to the Permissions tab (Tools > Page Info > Permissions)
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

TS3284 This apple fix is crazy, I have to this every time I boot the computer, is this right, is there another way to permanently make my calibrated profile automatically boot too !

This profile fix suggested by apple as a workaround to set calibrated profiles is most un Apple like, I have to do this preference/colur fix every time I boot, Is there a better way to have my preferred profile boot too !

Are you in fact using 10.7.3? The article you link to was for a once-off problem after an upgrade to 10.6.3.
How did you make the custom profile? I would suggest deleting any non-Apple profiles, remake your profile, and see does it auto-load on boot.
If it doesn't, then immediately after boot run console.app and scan through the console messages from the boot process and see are any relevant ones being posted. Then repost your problem details in one of the 10.7 (Lion) forums.

'Select WLAN Network' every time I boot! Grr.

Similar Messages

Maybe you are looking for