"select your country/region" in PE9?

Why does the  "select your country/region" window come up every time I open my PE 9?
It is quite annoying, you would think once I tell it that upon installation it should accept that and not ask it again and again  and again!

Hello Sue,
Thanks for the information.  I had found the .ini file and added the country
information but it didn't solve the problem.  Yes, I have tried reinstalling
the program.  I used Revo Uninstaller at its highest level to remove all
remnants of the program.  I then went into the Registry and removed every
reference to Adobe Photoshop Elements.  I did computer-wide searches and
removed anything associated with Adobe Elements.  I then downloaded a fresh
copy of the program and installed it.  Still no success!  It helped with
other problems (Organizer being very sluggish, especially in Folders view)
but did not affect the Country/Region problem.  So, I don't recommend
reinstalling as a solution to our problem.
I learned something yesterday which may(?) have a bearing on this issue.  I
was unable to sign into my Adobe Account due to an ID/Password issue and
learned that when I opened my account I left the "T" off my email address
(.ne instead of .net).  They had to move the problem to the next level to
get it resolved and I'm supposed to hear something next week.  I am
wondering (perhaps in ignorance) if this could be causing the Country/Region
problem?  Perhaps my computer needs to communicate with Adobe to select the
correct Country/Region.  Who knows? I guess I will see when they resolve the
ID issue.
Best Regards,
Perry

Similar Messages

  • New MacBook Pro, unable to get past the select your country screen during initial setup.

    I purchased a new MacBook Pro last night and am unable to get past the initial setup screen where you select your country.  The mouse will move around, but won't actually allow me to click on 'continue'.  I've also tried the keyboard commands to move to the next screen.  Nothing...

    I just experienced this, and I am recording the solution here for posterity. I got through the setup using the keyboard (tab to move between controls and space to select), thinking that the mouse click would work when I got through it. But I was dismayed to find that it did not ...
    ... at least so I thought! But actually, you have to push down the mouse pad, NOT just tap it. You can turn on tap-to-click later, but at the start you must push it until it audibly clicks. It is not obvious if you are used to Windows laptop mouse pads like me, where tap-to-click is the ubiquitous norm.

  • Commerce is not currently available in your country/region psn

    Good day,I tried to purchase content from PSN store through PC but once I get to Order & Pay and confirm, this appears. It happened to me week ago as well.I managed to purchase content by buying it directly on PS3 store but I would like to know why this happens because I don't want to miss some content because I won't have console with me. My PSN in from Czech Republic and the content I was trying to purchase were 2 games (Natural Doctrine and Surgeon Simulator) from Black Friday sale.

    Here is my fix for this problem. I use credit card as payment methods. When ever I get that message"commerce is not currently available in your country/region psn" I go to Account Management Site: https://account.sonyentertainmentnetwork.com/liquid/confirm-sso!input.actionLogin and go to Account > WalletYou will find Payment Methods section. The you can add new Credit Card or edit your curent Credit Card info.If you already have Credit Card added press Delete and then Yes.Then Press Add Credit Card and add same card you just deleted.And that will fix the problem temporarily.I say temporarily, cause it will work for about 10 days and the you will start getting same message.Then it's just the mater of doing same thing over again.I guess that Sony's servers automaticly "sing out" your credit card for safty reason.Any way I hope that this works for you.

  • HT1918 How do you change your country/region settings with a balance?

    I've relocated to another country and still have a 1 yuan balance with my itunes account that was synced in China.  When I try to change my region settings to Canada, it says that I must spend my balance in order to make the switch.  There is nothing that I can purchase that is 1yuan (even when if I top up the balance, there isn't an app that is 51 yuan or 101 yuan).  How can I get rid of the balance so that I can change my country settings to Canada?

    sakurasakura3 wrote:
    ...How can I get rid of the balance so that I can change my country settings to Canada?
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • How to change your country on iTunes?

    how to change your country on iTunes?

    If you just need to change the country of view, in iTunes go to the bottom of the iTunes Store main page and look for either the "Change Country" link or the round "flag" icon. Click on either and select your country from the list.
    If you are moving to another country and need to change the country of your iTunes Store account, log into your iTunes Store account and you should see a "change country" link. You'll need a valid payment method for your new country. You can also just open a new account in the iTunes Store of your new country, something which many people recommend to avoid causing problems with updates to existing apps which do not transfer to your new country's Store.
    Regards.

  • HT201210 There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country.

    Please help me

    You do not say what your problem is...
    Go to Service Answer Center - iPhone and select your country from the drop-down box if that is all you want to do.

  • HT4061 There is a problem with your iPhone. Please visit the Service Answer Center to find answers to all your questions about service options, warranty and other processes in your country. To find your nearest Apple Store, click here.

    these is the message i get on itunes screen, when i active my iphone 4 which was working fine i just updated IOS to 6.1. could you please help

    You do not say what your problem is...
    Go to Service Answer Center - iPhone and select your country from the drop-down box if that is all you want to do.

  • HT2736 How do you remove any remaining gift certificate credit from your itunes account as one is prompted to do this if you want to change your country or region?

    How do you remove any remaining gift certificate credit from your itunes account as one is prompted to do this if you want to change your country or region?

    Please supply answers that do not refer me to contacting support.

  • Unlimited calls to a country/region of your choice

    Hello
    I just got skype premium and it says I get unlimited calls to a country/region of my choice.
    I chose hong kong but then it asked me for $$ and I don't want to give them my $$.
    So How do I do it (live chat support isnt working).
    Thanks 

    TheWaterlooKid wrote:
    but then it asked me for $$ and I don't want to give them my $$.
    Hello,
    This is a bug in our system which is being corrected as quickly as possible. It is not necessary to purchase credit with a Subscription. Apologies for the inconvenience.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • I want to change the country/region in my Apple ID but it wont let me because I have 69 cents credit left in another country's itunes how do I do it?

    We bought the phone in another country and used it there on a prepay plan. we also purchased several itunes gift cards and used them to download some music. We used all but 69 cents of the credit on the itunes card before leaving that country. We are now in another country and have signed up with another cellular provider and purchased another itunes card but when we went to redeem the credit on the card it wouldn't accept it and said it was only for use in the country we were in. I realised our itunes account did not recognise we have gone to another counrty so I went into the settings of the phone and selected the iTunes and App Stores. When in that setting i tapped the Apple ID and then view Apple ID which then gives you the option to change the country/ region. However when I try to change the country I keep getting the message under the banner Account, which says "You have a store credit balance; you must spend your balance before you can change stores".
    I have looked through everything but cannot find a way to delete or spend the 69 cents credit. Can anyone help me?

    Mikeandnicki wrote:
    I have looked through everything but cannot find a way to delete or spend the 69 cents credit. Can anyone help me?
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • How can I get past dialog box that wants my country/region?  Premiere Elements 13 will not open!!!

    Cannot get past the country/region dialog box because the list will not allow me to select the United States as the place where I live.  The list is too long and no way to get to the bottom to select the United States!!!  I can't get into Premiere Element 13.

    TNDOGGER888
    Thank you for the reply.
    Let us start with
    1. Is the computer operating system Windows 7, 8, or 8.1 64 bit? If it is and you are installing Premiere Elements 13, then the program files will go by default to Local Disk C/Program Files/Adobe/Adobe Premiere Elements 13 as the default location. If you have a computer that is using other than Windows 7, 8, or 8.1 64 bit, then it will not. Another question is, when your drives were set up, was the SSD drive designated the C drive?
    2. From what you wrote, I understood that you were using your installation files or installation disc to install the program, but were getting stopped very early in the installation process because you could not set the country/language. Typically that setting is done while you are starting the installation. One of the early dialog boxes that you get in that process is named Choose Setup Language (or something like that). That is where I believed you could not set the country/language. Is that the place to which you were referring or some place else?
    3. You do not need to uninstall Premiere Elements 10 to install and run Premiere Elements 13. Just use one program at a time.
    Typically 32 bit applications in a 64 bit computer operating system run in the 32 bit compatibility mode of the 64 bit system. And, these 32 bit applications program files will be in Program Files (x86) Folder. The 64 bit applications program files would be in Program Files. With regard to Premiere Elements 10, some of its files may be found in Program Files and Program Files (x86).
    But, the main focus now is getting Premiere Elements 13 installed to the default location on the Local Disk C/Program Files/Adobe/Adobe Premiere Elements 13 during the installation process after you designate the country/language and are given a country dependent NTSC or PAL system with which to work.
    From a quick look at 13 installation on Windows 7 64 bit, the first installation dialog that mentions language with country implications is
    This is for Premiere Elements 13 on Windows 7 or 8.1 64 bit. Since you say that the United States is further down the list in your case, I suspect this is not the place where you are having problems. Note the default location in this Options dialog. Did you leave that as is or change it to something else?
    Are you having these issues when you get to the Sign In dialog or some place else?
    Please consider and then let us decide what next.
    Many thanks for the follow up. Appreciated.
    ATR

  • No billing country/region for my country???

    My fiancée just got back from her Melbourne trip and bought an iPad while she was there and now I'm being asked to figure out how to get all her favourite apps and games. The problem is there is no billing country/region for our country Fiji! If I select Aus/NZ as region than I have to supply Apple with a credit card details and billing address/phone number from either country!!
    Is there any way I can manage to install all the apps and games?
    Regards,
    Flashfalla

    Hi Karthik,
    check status of the delivery. If in table vbup is not relevance for billing, your Customizing is not correct.
    The status should be 'A'.
    In the item-type your have to check the relevance for billing.
    hans

  • When I change my country region it says I need to spend all my glance, but my glance is 0.8, how can I spend it to 0?

    when I change my country region it says I need to spend all my glance, but my glance is 0.8, how can I spend it to 0?

    Hi ...
    Your credit or debit card credentials must be associated with the same country where you reside.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article

  • Please HELP!! MacBook stuck on "Select your Keyboard" screen after installing Snow Leopard on a brand new hard drive!

    Hello, I just recently replaced my internal hard drive in my MacBook [from a 250gb to a blank/empty 750gb]. I managed to get OS X Snow Leopard installed with the DVD. Setup seems to run fine at first, I get the screen in space with the welcome message different languages while music plays. Then I'm asked to select my country, then here is my problem- the next screen asks me to "Select Your Keyboard", I select & click "Continue" button, then my Mac is just showing the spinning beachball & it stayed that way all night =( I don't know how to fix this. Anyone experience this or have any solutions for me? I'd appreciate any help! Thank you! [I've been googling since yesterday with no luck on finding an answer].

    It's diagnostic software. It's supposed to help you find problems. I don't think anyone is making any software yet that fixes hardware problems.
    That said, the two comments:
    Le husky wrote:
    Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive....
    .....also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost....
    would lead me to think it's the logic board. On older MacBook Pro's both the USB I/O ports and the keyboard/trackpad are fed out of an integrated USB controller integrated into the South Bridge I/O controller. On newer models, the USB ports come out of an integrated North/South bridge controller and the keyboard/trackpad are handled by an SMC controller, which itself interfaces with the I/O controller. All of these items are on the logic board, and they're all unrepairable.
    ...unless of course the "internal drive [that] is installed in a cheap external case" is itself causing the problems. Another thing to try might be a different USB port, if you haven't done so already.
    I didn't know the price for Scannerz went up. I could have sworn I only paid 30-some bucks for it. Maybe it was on sale at the time. I don't remember.
    In any case, good luck.

  • Can we know the geographical info(country, region, city,...etc) using java

    Hello Everyone,
    I'd like to know the geographical info(country, region, city,...etc) of client using java API.Is this possible?
    I have searched on the web.However, I could not get any info.
    Could someone let me know whether it is possible or not,Please?
    Any help would be appreciated.
    Thanks.

    Albert_EINstEIN wrote:
    Thank you friends for your replying.We know that default language is English.In some cases client may belong to another country other than US.In this case we get the country US if we use below code.
    java.util.Locale.getDefault().getCountry();
    I am afraid this is not always correct.It obtains the info from the underlying operating system. There's no other way around this, other than asking your users themselves. Why do you need this?

Maybe you are looking for

  • How can I get my iPod touch to download and install updates to apps?

    I am having difficulties with getting updates for my apps to download and install.  When requested, I supply my password for my apple ID, and select "update".  It immediately jumps to the screen with my icon, and then gives me a status bar and says "

  • Where can I download the full installer for flash player?

    All we find in the site of Adobe is a litle program tha DOES NOT install flash player. Instead, it install one litle program (install_flash_player_11_active_x_32bit.exe) to do the download. And it DOES NOT DO THE JOB. All it does is say to the user t

  • Error when executing query in the Web Analyzer...

    Hi All, I am using 2004s and when I try to execute the query in the BEX browser I get the following error. It works well in the Bex analyzer. Do I need to have some java plug ins for this to work? http://bi6.domain.com:50100/irj/servlet/prt/portal/pr

  • Automate ODS data deletion

    Hi all, I could use the Manage functionality for selective deletion, but I am trying to automate the process. We want to keep a 30 days of data in the ODS, so I am hoping to call the Function Module from an ABAP program executed from a process chain.

  • Random changes when syncing

    Since changing to Lion and iOS5, date/times for events are randomly changed during the syncing process. Events are no longer editable on my iPhone4. Notifications show duplicate references. Events are removed. None of these problems occurred before t