Selectable doesn't works for input field

I wonder that the selectable property doesn't works even for
input field in flash 8'
I can't see, select, type anything.
Is there any reason for it and how can I tackle this issue.
But it's not a problem in IE7 and works fine in IE7 even it
doesn't do in flash IDE
Plz anyone get this solved.

Are you saying you have an input field and cannot select text
you type?
BTW, setting an input field's selectable property to false
locks the field.

Similar Messages

Change History doesn't work for extended fields in CRM Case

Hi,
I have extended the CRM Case with some new fields but when I change values in any of these new fields, the Change History assignment block doesn't record the old and new values.
Case: UI component/View - CRMCMP_CMG/Header
Change History view : LOGOVERVIEW
Has anyone encountered such an issue? For me it looks like an issue with Standard SAP but couldn't find any releveant OSS notes.
Regards,
Akash

Dear,
I know it's been a while since the question has been raised, but I'm putting the solution just in case someone run into this post.
The solution is simple and does not require any development. In attribute profile that is assigned to case you have to assign your custom developed case attributes and mark the "Log" column as checked (last column).
regards,
Kornel

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

How can I upload a video from my PC through I tunes to camera roll on my iPhone? Is there an app or format of specific video supported? Sync from photos include video doesn't work for me.

download the new you tube apps in i tunes, in os6 just pick a video in the photos apps and select share, the old you tube app icon will appear

Oracle client 9i doesn't work for windows ordinary user

Hello All,
I've installed oracle 9i client on windows xp. Client software works for user belonging to windows administrators group. it doesn't works for ordinary users not belonging to administrators group. Particularly when i run sqlplus from command line i get following error :
Incorrect environment variable PLUS_DFLT
Program execution error.
i also need access to Oracle ODBC driver.
When i try to configure ODBC source (created by user with administrator privileges) by common user i get following errors :
The setup routines for Oracle for Oracle in OraHome9i ODBC driver couldn't be loaded due to system error code 5
Could not load the setup or translator library
Very appreciate for any help.
Regards Arkadiusz Masny

It sounds like the users on the machine do not have access to the Oracle home directory. Check the permissions of the folder by right properties, select the user and check that they have read and then select advanced. Tick the "replace permission entries....." box and apply. This will re apply all user rights in all folders and subfolders. Try again.
HTH Mark F

S_ALR_87012177 (customer payment history) doesn't work for histories ...

Hi All
Rif t.code S_ALR_87012177. This report requires, for working, the flag in th filed "Payment history record" in the tab "payment transactions" of customers master data.
I've adjourned the master data of the customers putting in the field "Payment history record". But the report doesn't work for histories. Is there a program which make the report working for histories too?
Thanks
Gandalf

Hi Pankaj,
We canu2019t see document currency in this report; better u can see document currency in T. Code u2013 FBL5N.
Thanks

T.code S_ALR_87012177. It doesn't work for histories: is there a solution?

Hi All
Rif t.code S_ALR_87012177. This report requires, for working, the flag in th filed "Payment history record" in the tab "payment transactions" of customers master data.
I've adjourned the master data of the customers putting in the field "Payment history record". But the report doesn't work for histories. Is there a program which make the report working for histories too?
Thanks
Gandalf
Edited by: Umberto Gandalf on Mar 23, 2009 12:02 PM

Hi Suresh,
I have one issue with same report
when i seen the report there are two arrears days are showing to corresponding to the months Feb
as per the Report S_ALR_87012177 help following below
Arrears in days
The average days in arrears are determined as follows: Every
incoming payment in the periods concerned is multiplied by its days
in arrears. These amounts are added together and then divided by the
total amount from all the incoming payments. This process ensures
that the days in arrears are weighted by the payment amount
but for February month there are 9 payments on one customer and when checked in FBL5N report
there are no Arrears days on each payment document but in the report "customer history ' there showing 2 days as arrears under " payments with Cash discount .Arrears"
User has doubt how this report is working to show the Arrears days
Are there any Formula , can you please advise me
if you knows well about this
Regards
Ranamka

Lighting effects in Photoshop CC doesn't work for me ... just shows ALL black .. any advice to get it to do what it is supposed to?

Lighting effects in Photoshop CC doesn't work for me ... just shows ALL black .. any advice to get it to do what it is supposed to?

So, you're totally new to computers?
Go to the Help menu in Photoshop and select the System Info menu item. Copy all that information and paste all of it here MINUS your serial number.
Yes, Photoshop can delegate a lot of the computing tasks to the GPU on your graphics card. You may have to disable that feature in Photoshop Preferences > Performance.

SPRunConversionVersion7.0.119:Doesn't Work for Account without any ratetype

Hi Experts,
I work with SAP BPC MS7.0
And the SPRUNCONVERSION doesn't work for accounts without any ratetype : value in the dimension is in blanck.
I though that it was supposed to work like this :
"The stored procedure SPRUNCONVERSION scans all records found in the selected region of data and translates them according to the RATETYPE property assigned to the ACCOUNT specified in each record, based on the following mechanism:
All ACCOUNTS with no RATETYPE (ratetype = blank) will be translated with a factor of 1
All ACCOUNTS with the reserved RATETYPE = NOTRANS will not be translated
All other ACCOUNTS will be translated according to the definitions contained in the table of parameters called clcFXTRANS."
Doesn someone has faced this problem already ? how can I solve it ?
Thanks for your help,
Olivia

Hi Olivia,
This was seen as inconsistent behavior and was corrected in SP10.
See the following note [1569127|https://service.sap.com/sap/support/notes/1569127] for further information.
Thanks,
John

Infotype Screen Control (T588M) not working for additional fields to contro

Hi,
I have a requirement to enhance IT 0002 with fields LNAMR, FNAMR and CNAME. Also field preferred language.
I have included LNAMR, FNAMR & CNAME as additional fields in the Include Screen 2040 elements, lay editor and maintained table T582c where i have assigned enhancement to the standard screen. These fields are getting displayed in infotype 0002
But the issue is Infotype Screen Control (T588M) is not working for these fields to control the display or hide.
Has any of you come across this issue? what could be the reason for this issue? Please suggest ASAP.
Thanks in advance.
Regards

Hi Experts,
Please help with your inputs and suggestions.
Regards

Pickup Clock doesn't work for markers. Any alternatives?

Hello everyone,
It seems that Pickup clock doesn't work for markers (I guess markers are not considered an "event.") Is there a way to move markers as quickly as I do "event" data with pickup clock; e.g. a key command that allows you to write the location start time of your markers? Or even better, a way to move all data within locators to different song positions quickly?
I'm scoring a film and trying to break down my master "spotting" session (in which I placed markers at the beginning of each cue) into separate files. Moving "events" is easy, as I just separate at the marker using "cut at spl" select all following, move SPL to bar 1, and use pickup clock. However, no "global track" data seems to move via pickup clock. Is there an easier way to achieve my goal?
Thanks in advance for your help!

musicspirit wrote:
Is it that you want to move Global components that fit with a particular cue ( such as Volume Automation etc) around in the same Song? ie try one piece of music over two different scenes in the film? Or shift an entire cue slightly sooner or later against the picture?
YES!! This would be AMAZING if I could do this easily. As a work around I change the actual movie and of the dialog / sound FX tracks, which can take some time to get them correct and leaves you with multiple song files. It would be much easier if there was a way to grab everything within your Left and Right Locators, and be able to move it around, copy and paste, etc.
I tried experimenting with Split/Cut/Insert Time and a segment of regions which included some volume/fader changes - no dice. Logic can copy automation vertically track to track but not in a Linear way.. though I may be speaking in complete ignorance.
I'm going to read up on Split/Cut Time as well, as this maybe the key. As for your automation issues, I know logic will not copy / paste automation when there is no "node," (i.e. if you are cutting on bar 5, but the last node was on bar 3 and the next on bar 7, it will not "go back to 3" to get the proper levels) so in the past I have placed nodes on the beginning and end of the section I want to copy, and the automation then copied fine. Of course if you have a lot of automation, it can be a PITA to place nodes in each track, but it does seem to work. Hope that helps!

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

Push notifications doesn't work for apps like (fb viber , whatsapp etc ) iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

Sorry, I've forgotten the actions done.
I've restarted the iphone, and I've recovered a previous backup.
Thanks.

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks

Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.

I've bought an app called WhatsApp but I was not told that app doesn't work for ipod. So I would like to know how to turn back and get my money back.

Did you fail to look at the requirements before purchasing?
All sales are final. You can try contacting itunes support and asking for an exception

Selectable doesn't works for input field

Similar Messages

Maybe you are looking for