Selected communication channel IDoc_AAE_In is assigned to the wrong adapter type IDoc_AAE Supported adapter types: HTTP, SOAP, XI, WS.

Hi Team,
I have a problem.
I have a scenario using the the Sender Adapter. HTTP_AAE
When I am trying to use the function "Display WSDL" I am receiving the following.
Error:
Selected communication channel HTTP_AAE_In_SAPII is assigned to the wrong adapter type HTTP_AAE Supported adapter types: HTTP, SOAP, XI, WS.
Somebody knows this problem?
Thanks

Hi,
am also getting same error.
think that feature is not supported.
have look on Configuring the Java HTTP Adapter on the Sender Channel - Advanced Adapter Engine - SAP Library for sending a message.
reg,avinash M

Similar Messages

Communication Channel Inactive but Still processess the file

hi all -
New PI 7.0 installation. Going through lot of issues.
XI, CRM and other systems reside on the same server. SLD resides on the same server but different SID.
I had made some changes to the communication channel - made it active, inactive, changed the polling interval.
Nothing is getting reflected on the RWB -> Component Monitoring -> Adapter Engine -> Communication Channel Monitoring -> Processes the scenario and none of the changes in the Integration Directory gets reflected in the RWB.
1. Did SXI_CACHE, Delta Cache Refresh, Complete Cache Refresh. Still processes the inactive communication channel.
2. Did CPA_Cache refresh. Still processes the inactive communication channel.
3. Checked the business system -> url for the IS and it works fine.
4. Cleared the SLD Data Cache from the Integration Directory.
Any other ideas what could be wrong?
Thanks,
Tirumal

Hi,
Check it..
>>>>I had made some changes to the communication channel - made it active, inactive, changed the polling interval.
After the Changes activate your changes.
Regards
Agasthuri Doss

Select a location that is assigned to the plant chosen

When trying to create a shopping cart I get the following errors:
Select a location that is assigned to the plant chosen
Back-end data could not be read
SRM 7, support pack 9 extended classic.
I have replicated plants from R3 Back End and everything looks fine in BBP_LOCMAP table and talbe looks same in QA and DEV.
We only get this error in our QA system, DEV system is ok.
The shopping cart is picking up the company code and location from the org chart correctly.
I see postings in the forum for this error but no clear solutions or causes provided.
Thanks,
Matt

Thanks everybody we have solved the issue.
I missed a checkbox in config designating SRM as the local system. This is in define system landscape node.
We found issue by
Put a break point in function module BBP_PD_MSG_ADD. Once you hit one of your messages, check the call stack to see the calling function/method who triggered the error message.

Why do my contact photos keep getting assigned to the wrong person/number?

This has happened to me twice recently: my phone rings and the wrong contact photo appears with the wrong phone number. All my contact photos are assigned to the wrong person/phone number. Any ideas on what's going on? Thanks!

Thanks for your reply.
Can I get this straight in my mind? Does this mean that I will have to put ALL the photos stored on my Laptop into ONE large folder, then divide it up into sub-folders? Then I can copy each sub-folder?
Sorry to sound stupid, but most things I try on my ipod don't seem to work for me. I think I am getting a bit old for all this.....lol.
.......Actually thinking back, a while back I did click on my main folder called "Nikon" and that did copy everything in it, but just in one whole lot, ie 1,000 photos.........................so nothing was sub-divided into folders, ie. holiday 2010, holiday 2011. Is that another problem I have created for myself?
Thanks for your patience.

"the file has an un-supported compression type" appears today after updating Premiere Pro CC

Started computer, Opened up TX ATTO project today and portions of an existing project is off line after project opens, and does not ask you to relink as it is opening.
A segment of a sequence in the timeline is Off Line. Go to Relink, then find clip, select, then “the file has an un-supported compression type” appears as you select the correct clip to “relink”. Will not let you relink. Fun Fun
I did nothing but edit yesterday and e-mail. Nothing new or opened, except update CC PP. The clips that it need to link with are there.

MTS files, from a SONY FS100 camera. First time we have seen this occurrence with multiple boxes running PP CC.
I tried some just basic tests.
It was only one clip. So I copied it to the desk top, renamed it something different and it relinked that specific clip thru the entire timeline. Weird. Something with the clip name with in the project got corrupt, because even the specific back up of the RAW media clip on our server said the exact same error.
Problem solved.
Thank you for responding!

How do I view downloaded content when the error message, not a supported file type or because the file has been damaged, shows up?

I trying to download a book as a pdf to view through my adobe reader. But every time I do I keep getting the same error message saying that the file is not a supported file type or because the file has been damaged it can't be opened or viewed. What do I do and how do I get it to work. Because as of now I only have one option of downloading the book and I've tried to download the app notable pdf to see it that worked but it didn't either. As of right now I'm using google chrome but I also tried using Safari but it's still not working. I have a Mac with a Mac OS X updated system. I need an answer ASAP. Can anyone help me?

I have the same issue. Almost none of the PDFs I download from Safari browser can be opened. Same message about the file being damaged or not really a true PDF. Neither of these are the issue here. Size of file is not an issue. I have Acrobat Reader XI so I believe that's pretty up to date. If I open with Text Editor the file is blank. any ideas?

The style 'dropShadowVisible' is only supported by type 'mx.controls.List' with the themes(s) 'spark

I'm still plagued by these warnings in my Flex project:-
The style 'dropShadowVisible' is only supported by type 'mx.controls.List' with the themes(s) 'spark'
Clicking on the warnings doesn't take me to the code.
The project started as SDK3.5. I've made it into an SDK4.0 project. It uses old Halo components throughout. I've chosen a Halo theme.
I can get rid of these warnings if I "Use Flex 3 compatibility mode". BUT, If I use that mode, I get also Run Time Errors - so I decided against this compatibility, and just edited the styling, deprecated syntax, and a few issues to make the app work.
I tried the solution someone suggested editing the flex-config.xml file, but it didn't work for me.
The application begins...
<mx:Application
xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:mx="library://ns.adobe.com/flex/mx"
xmlns:s="library://ns.adobe.com/flex/spark"
(I've obviously tried clean).

Yes, very irritating. "Only a warning" isn't the whole story, it's more than just an annoyance, it can potentially make all warnings useless.
Imagine cases where you have multiple warnings (often FB warnings turn up for EACH component resulting in many repeats, design mode is particularly bad with this). Having a ton of warnings that "aren't really warnings" obscures REAL warnings that we'd want to do something about (and makes errors harder to notice at first--you're so used to always seeing lines under the problems tab that you don't always notice a new error that just popped up). In the worst case scenario a valid warning that would have prevented a bug is missed and something goes to QA or production that should have been caught at compile time...
This wouldn't be nearly as annoying if we had some decent way of filtering these warnings from the problems tab. The current filter isn't good enough and only seems to allow you to filter out one message due to the way it works, but sometimes we see more than one type of "bogus" warning.
Voted and added to comments. I wonder if there's a feature request out there to improve warning filter capabilities? I also wonder why nobody complained about this before, it seems pretty easily visible. Is it the norm for people to just always ignore warnings? This isn't a good practice, warnings tend to exist for a reason.
(Btw, this is part of my reasoning for the claim that Halo seems to have become a "second class citizen" component set - hopefully Adobe can do something about this.)

Message mapping hangs when selecting communication channel

Hi Experts,
I have a strange problem. In message mapping, there is an RFC Lookup. For this RFC lookup, there is one parameter of type communication channel. I want to test this message mapping. So, I go to the Test tab and browse for all available communication channels. When I select a channel and click on Select, ESR hangs. I am not getting why this is happening. Please help me get rid of this problem.
Thanks,
Netrey

Hi,
Got solution for this problem. Below is the communication from SAP on this issue,
Please apply the latest patch levels for the PI components, following
the steps below:
http://service.sap.com/swdc
1. Software Downloads - SAP Software Distribution Center
2. Support Packages and Patches - Entry by Application Group
3. SAP NetWeaver and complementary products - SAP NETWEAVER PI
4. SAP NETWEAVER PI 7.1 - Entry by Component
5. Process Integration. The components that should be updated are:
ESR 7.10
MESSAGING SYSTEM SERVICE 7.10
XI ADAPTER FRAMEWORK 7.10
XI ADAPTER FRAMEWORK CORE 7.10
XI TOOLS 7.10
Thanks and Regards,
Netrey

Communication Channels do not appear in the monitor

I have just created a sender and receiver file adapter and activated them. I tested them in a process by dropping a file into the sender directory with a 10 second poll interval. The file is not being processed.
If I check the corresponding Integration Server Adapter Engine status, there is a green light, BUT When I select the Communication Channel Monitoring button, there are no channels!
Also, although I have created parties that use these channels, they also do not appear in the filter drop down list.
Is there some reason why these channels are not appearing?
Just for clarification; this is on a new XI installation.
Kind Regards,
Tony.

Hi,
import SAP basis software component into repository
as per question:
3. I can't see my adapters in the adater monitoring after the import of a new SP
on XI FAQ
for PI 7.0 - sap basis 7.0 for XI 3.0 sap basis 6.40
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Communication channel monitoring did not record the processing detail

Hi,
I have a proxy-to-file scenario. Usually, I can see the processing details for the receiving file communication channel in Communication channel monitoring with the Message ID and Explanation. And if I click the Message ID, it will give me processing steps in Audit Log. However, I don't see this log for last night's run. In SXMB_MONI, it shows me 2 messages were successfully sent out. The second message should be appended to the first message in receiver file. But the receiver side only got the first message data. Is there any way I can find out why the second message did not reach to the receiver?
Thanks in advanced!
Meiying

Hi
Try opening directly
tools->Internet Options->Advance, uncheck show HTTP friendly error messages under Browsing, then try
http://<host>:<port>/mdt/channelmonitorservlet
You need the authorizations of user group SAP_XI_ADMINISTRATOR with the role modify.
also refer
No "Adapter monitoring" in runtime workbench

XI: Sender JDBC Communication Channel is not getting picked the records

Hi All,
Here I 'm facing an Issue with my sender JDBC communication Channel. Previously it was working fine but It is not Picking the records from the JDBC table.
Communication Channel is in active mode only.
I have checked in RWB communication Channel monitoring there i didn't get any error or success messages but channel is showing healthy status only(Green)
But i had created the new communication channel..with the same parameters which are in the older communication channel.. and sender agreement level also i had changed.. so now new channel is working fine.... I didn't understand what is the problem with previous communication channel.
Thanks

Hi yadav,
do you have TWO CCs polling at the same time via JDBC?
This could be the problem --> a conflict between both CCs.
Switch off ONE CC:
Regards Mario

Defect is assigned to the wrong characteristic in QN

Hello Gurus,
I am in real conundrum please help...
Scenario of my problem:
1) User creates a defect in subsystem against a characteristic, during measurement readings.
2) Subsystem transfer the measurement data to SAP.
3) If defect is there automatic QN is generated.
4) Problem is when QN is generated. Defect is assigned to the first characteristic of the operation, instead of the characteristic defect supposed to be assigned.
My question where can i do the debugging to find out why its happening? It is only happening in prodcution environment and I am not able to reproduce in quality system which is making it hard to debug.
Any help would be really appreciated....thanks!
Owais
Edited by: Owais Ahmed on Sep 23, 2009 6:35 PM
Edited by: Owais Ahmed on Sep 23, 2009 6:36 PM
Edited by: Owais Ahmed on Sep 23, 2009 6:37 PM
Edited by: Owais Ahmed on Sep 23, 2009 6:37 PM

Hello Sami,
Responses ot your questions;
which version you are?
4.7C
what inspection type?
So far i had issuies with incoming good receipt.
Are you using inspection point?
Yes.
this problem is happening only for auto QN?
Only with AUTO QNs, no issues with manual QN.
Are you passing defect record from subsystem or only inspection result?
Compelete measurement data along with defects except UD which we do in SAP.
thank you so much...
Owais

Error message: CO account assigned to the wrong company code

Hello,
I've had the following error message in a report: "The CO account assignment object belongs to company code XXXX, not YYYY." What object is this? How can I change the assignment of the object to the company code? Which transactions should I use?
Please help me.
Thank you all,
Tatiana

Hi,
CO assignment could be through cost centre, I/O, WBS, cost object etc. Check your document and go to the master data of the relevant object. Keep in mind, that if there are postings on the object done already, you cannot change the assignment to company code, but have to create a new object (or use another one in the document, of course).
Regards,
Eli

Apple Support Communities ID assigned to the wrong Apple Account

I have two Apple ID's but I have assigned my Apple Support Communities ID to the wrong Apple Account, the ID iMAK79 was used for another Apple Account, now how can I assign this ID to the Apple Account that I want?

Read https://discussions.apple.com/message/22662717#22662717

Error message: CO account assignment to the wrong company code

Hello,
I've had the following error message in a report: "The CO account assignment object belongs to company code XXXX, not YYYY." What object is this? How can I change the assignment of the object to the company code? Which transactions should I use?
Please help me.
Thank you all,
Tatiana

HI
i think the error message number KI100 if message is KI100 you can supress error message by using transaction code OBA5
if error message is different please let me know the error message number
Thanks & Regards
Phaneendra

Selected communication channel IDoc_AAE_In is assigned to the wrong adapter type IDoc_AAE Supported adapter types: HTTP, SOAP, XI, WS.

Similar Messages

Maybe you are looking for