Selected Destination Folder is not mounted

Hi experts ,
Im trying to move my local EJB module to the Existing NWDI track , EPD***, having webdynpro dcs .
Now in navigatior work space on right click of my EJB project selecting -->DTR-->Share project ---> we have to choose destination folder and click the button Create Folder ,
now here i have my track
EPD*****CMS under which i have software component ****_PROD_SC -->dev-->invactive-->DCs
****_PROD_SC -->dev-->invactive--> SCs
here if i chooose any folder dcs or scs im getting error as Selected Destination folder in not mounted , and create folder button in not getting enabled .
Please help me out
Regards
Govardan Raj

Hi jun wu ,
my EJB is normal ejb project and it is not of type DC , and i have solved the above issue by creating another folder in the DTR work space, and i was able to move the project to the DTR following the steps mentioned in the link
http://help.sap.com/saphelp_nw70/helpdata/en/c0/0e0540ba5ee569e10000000a155106/content.htm
Regards
Govardan Raj S

Similar Messages

I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?

Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated.

Saving photos to the web by creating events. Called the destination folder does not exist.

Hello,
I ask you for advice (assistance). A week ago I re-installed the PC and installed to the computer again Photoshop CS5. Everything works for me except for the function of storing images for web by creating events. Called me constantly destination folder does not exist. The problem I had before. I ask you this advice on how to solve this problem.
Thanks for the advice

hi,
i don't know if i integrate your code correctly, but it doens't work for me. I presently create skin for client and this plugin is really usefull for me.
i use win7 64bit home edition, and photoshop cs5
there is how i integrate this :
// EDIT ALEX GRENIER
function getPreferencesFolder() {
     var userData = Folder.userData;
     if (!userData || !userData.exists) {
          userData = Folder("~");
     var folder = new Folder(userData + "/xtools");
     if (!folder.exists) {
          folder.create();
     return folder;
function exportChildren(dupObj, orgObj, dupDocRef, folder) {
if (getCSVersion() >= 10) // CS3 Only
     // Create assets folder in Flex app's directory
     // var tempFolder;
     // tempFolder = new Folder (folder + "/assets/");
     // tempFolder.create();
     // EDIT ALEX GRENIER
     var tempFolder;
     tempFolder = getPreferencesFolder();
i put the code creating the folder in comment and put your code in place, i also put your function before the function creating file.
With the base code (without modification) photoshop is able to create my folder assets, but when it try to export the png, it export nothing, so i have a empty folder.
thank you,
Alex

Could not complete the Action, since the destination folder does not exist.

I'm a frequent user of "Image Processor" but today accidentally I am getting the error although I am having the required folder as a destination.

Is the Folder on an external medium, what are the complete path and name of the Folder?

Lightroom 4 will not import any new photos from Camera or a folder, "could not be read message" or "could not copy to requested location message"

One day everything worked and the next everything except importing new photos worked. What could be the problem? Did a recient Adobe update do this?

These messages usually mean the destination folder does not have WRITE permission. Change your permissions. (It's possible that it stopped working because the destination folder was accidentally changed, in which case you may only need to change the destination folder back to what it was previously)

File could not be moved to the selected destination

When moving a group of files to a different folder, most moved fine. For one I got a message "There was an error copying files to the destination you selected. The following files could not be copied." and "File could not be moved to the selected desination. (1)".
Having been a programmer I know that writing a really useful error message, as opposed to one like this that gives you no useful information at all for solving the problem, is not that hard. In fact, it's just basic sound programming practice. Yet I've encountered error messages like this more than once in Adobe products.
Now, the real question is what is this telling me and how do I go about fixing it? The file I was copying is in the original folder just like the other files I selected. The destination folder exists--the other files were moved into it. There is no duplicate of the file in the destination folder. The file is not lost because I can export it. The help file has no information. What else can I check?
(Yes, I know that a LR workflow is not built around folders. But sometimes you just need to move a photo.)

What OS/version are you running? External disk, network disk?
This is almost always a permissions / ACL problem. Happens most of the time with newer windows os like Vista and even worse with Win7. They've changed the way "permissions" are handled in both OS's to something more complicated. Not only do you have to have read/write access, but you must "take ownership" of those folders (and everything below them) to be able to use them properly.
Cheers!

Destination Folder not showing content after Export

I am running in a problem with 3.2 when I export Canon Raw images from one folder to another. What is happening is that post the completion of the export the destination folder will either show only part of the exported images, or none at all. This applies to the folder file count and what is visible in the destination folder in terms of visible images. IHowever, when I open up Windows Explorer or BreezeBrowser Pro, the content of the folder is correct. Here are the solutions I have tried:
1) Right-click on the destination folder and attempt to select "Synchronize Folder". However, it is grayed out.
2) Refresh the database and restart LR. This has not impact. However, "Synchronize Folder" is not availabe and it will show the missing quantity so then and if I pick "Synchronize" it will bring up the Import box and I will then click on import and now the destination folder shows the correct number of images and they are visible after open it.
3) When all else fails I do a repain install and that seems to correct the problem for a while.
Despite all these remedies the issue eventually reoccurs.
I am running Win 7 64 with 8G of ram and plenty of HD space. Anybody seen this behavior and if yes, found any solutions? Thanks in advance for any suggestions or help.

Rachel
Sounds like a damaged database file.
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

After upgrade to Yosemite, drag and drop for files does not work, destination folder crashes.

After upgrading to Yosemite, dragging and dropping files from one location to the destination folder, causes the destination folder crash. However, copying the file and then moving it works fine.
I'm not sure where to report bugs, but I figured this would be the best option

http://www.apple.com/feedback/ Feedback
https://bugreport.apple.com/ BugReporter

I am not able to import photos into Lightroom 5.7. When I select a folder, it doesn't show a preview of the images and the import button is greyed out. ??

I am not able to import photos into Lightroom 5.7. When I select a folder, it doesn't show a preview of the images and the import button is greyed out. ??
I have been using Lightroom 5 for 2-3 months now and all worked well, up until today's effort to import a new set of photos. I am working on a Mac with Yosemite 10.10.1.

Go to the bibliothec module, select the folder, right click on the folder and hit synchronize
Sorry I have only a german version , so don't know what your menu will show.

I have selected to have photos in my icloud but the photo folder does not appear.

I have selected to have photos in my icloud but the photo folder does not appear in icloud. There are many folders, like mail, but none for photos.

You can see photo stream photos on icloud.com. You can only see them on an iOS device or computer that is signed into your account with photo stream enabled. If you want to see them on the web, you would have to add the photos to a shared stream using the public website option enabled (see http://help.apple.com/icloud/#/mmc0cd7e99). This gives you a private url allowing you to view them from any computer browser.

Destination database instance is 'started' not 'mounted' in standby alert.l

11.2.0.2 Physcial standby db is taking long time to startup approximately about 20 to 30 minutes. In Alert.log i am seeing continous message "destination database instance is 'started' not 'mounted'" at time of startup. Its solaris 64bit platform. Any idea whats wrong?

user530956 wrote:
11.2.0.2 Physcial standby db is taking long time to startup approximately about 20 to 30 minutes. In Alert.log i am seeing continous message "destination database instance is 'started' not 'mounted'" at time of startup. Its solaris 64bit platform. Any idea whats wrong?what parameters you been set for LOG_ARCHIVE_DEST_2 in standby instance? Disable those parameters.
Next time paste your PFILE of standby.
>
user530956
     Newbie
Handle:      user530956
Status Level:      Newbie
Registered:      Sep 15, 2006
Total Posts:      113
Total Questions:      63 (63 unresolved)
>
WOW.... Not even one question was not resolved, Sad to see that no one is helpful in OTN, then work with Support.
CLOSE THE THREADS AS ANSWERED Keep the forum clean.
Read Announcement: Forums Etiquette / Reward Points
https://forums.oracle.com/forums/ann.jspa?annID=718

What does it mean, "the selected folder is not scannable" in Preview

I am trying to scan a document using a document feeder (Epson Workforce 633). It worked fine under Lion. Now trying it under ML, I get the message "The selected folder is not scannable." I don't see where one selects a folder and I can't find any menu that permits me to select any scanning target.

Quit Preview, delete the ~/Library/Containers/com.apple.Preview folder, and then relaunch Preview.
Hope this helps.

For some reason, my compression option is grayed out under "File" menu, and when I select a folder with multiple files, or multiple documents, and try to right-click or tap the mousepad with two fingers, I do not get a "compress" option available. Help.

I don't know why, but when I select a folder with multiple docs contained within it, or multiple files, the Compress option is grayed out under the File menu, nor is it available when I right-click. Please help.

Yes it is, but I have the same problem of the option does not appear with "right click" (I'm actually control-clicking), and COMPRESS is grayed out under the file menu. I'd like to fix it.
Hmm. After finding the Archive Utility,* I tried archiving the folder. It came out as .cpgz, ugh. Found there was a preference to make .zip the default. It worked!
And now…the menus are not grayed out. ?!?! OK.'
Hope this helps someone.
*You cannot find this via search, apparently it is a hidden file, you have to click from the root drive through to /System/Library/CoreServices (Thanks for the file path Alberto!)

Destination database instance is 'started' not 'mounted'

When i tried to startup the standby database, it is taking a long time. (Still it is not started)
The error in alert log is
destination database instance is 'started' not 'mounted'
Could some one help me ?
Thanks in advance..
regards,
Jibu

No version information.
No hardware or operating system.
No indication of whether physical, logical, or snapshot.
No indication of what commands you issued.
No error message (your impression of the message is not the message)
No indication as to whether it used to work or is a new install
No help is possible at this time.

Why can't I delete all incoming messages at once without having to select each one first. It can be done while in the "Trash" folder, but not the "IN" folder.

Why can't I delete all incoming messages at once without having to select each one first. It can be done while in the "Trash" folder, but not the "IN" folder.

Well, what I see happing is this: Tapping edit and checking the first message brings up the “Delete” option. Holding it until the red message “Delete Message” appears, then letting go of the red button and tapping the checked button makes the “Delete Message” message go away. The checked message is still checked with an option to delete just that message. Tap the checked message again just cancels the whole process and I’m back to square one.
However, if I check a message that is part of a thread of messages and tap Delete, I have the option of deleting all messages in the thread.
Perhaps the fact that I’m using the 3rd generation of the iPad is the problem, but your suggestion isn’t working.

Selected Destination Folder is not mounted

Similar Messages

Maybe you are looking for