Selected "Edit in Audition," audio track was split into two files. Preference change?[image included]

I have no idea what kind of shortcut key or preference I changed.
When I select any video on any premiere timeline to "edit in audition" i end up with the audio getting split into two wav files instead of one, as the red rectangular shows. Instead of the single audio track to edit in which you can see in the blue rectangular.
***The blue rectangular I got when I dropped a video directly into audition.
Update: did some testing around in premiere, this issue only happens with clips that are on a timeline, but if I "edit in audition" from "project" (main folder with all material), I can edit it properly.

Its one file with two different dispalys.
You can pull the bottom one down by dragging it down or hit the very little triangle on the right side.

Similar Messages

Video Editing is Causing Audio Tracks to Split

During workflow and after I've added audio to the timeline, I notice that I need to trim the video. Why is Adobe splitting the audio tracks at the point where I edited the video? This is creating a largw gap on the audio line. Am I missing a preference somewhere that locks the audio track to the timeline? Or am I going to have to keep editing the audio track after trimming the video? It seems like a lot of extra work for nothing if I really don't need to move or edit any of the audio.

Unfortunately, Track Locking is not a feature of PrE, though I have filed several Feature Requests. PrPro has that capability, since at least PrPro 1.0.
However, as Steve points out, using the Ctrl modifier key, changes the behavior, and turns off the default Ripple Edit function. Because of the inability to Lock a Track (Audio, or Video), I recommend that one not add an Audio Track (other than the camera Audio that accompanies the Video), until the editing is done. It can become a bit "messy." Now, if one is editing a "music video," that is not the ideal workflow, and Track Locking would be very, very useful.
Good luck, and if you agree that Track Locking is useful, I invite you to also file a Feature Request.
Hunt

Movie and iTunes Extras Split into Two FIles

I download most movies on my Windows 7 machine. It downloads just fine as does downloading movies on my two Macs. Things get a little weird when I use the iTunes feature "Show items not in my library" to keep all the copies of iTunes with the same downloads. When I copy from one machine to another, the movie icon in the Movies Library on the receiving machine breaks into two identical icons with different file names. For example, The Last Airbender - iTunes Extras & The Last Airbender. Is there any way for me to get these things to fuse back together?
Thanks,

Try this:
When you download iTunes Extras movies, the extras will be downloaded to your iTunes Music/Downloads/Movie_Subfolder. The actual movie usually is in the iTunes Music/Movies/Movie_Name folder. Go back to the Downloads/Movie_Subfolder and cut and paste the files from the .tmp folder into the same folder as the iTunes Music/Movies/Movie_Name folder.

PDFs Splitting Into Two Files

I have a few 70 page+ documents that I convert to PDFs for easier viewing, but lately when I go to "Print" and "Save As PDF", it'll convert the first 28-36 pages or so as one document and print the rest as a second document. It's a different number every time for the first PDF. I have to go into Preview and merge the two together, which isn't the end of the world obviously, but it is an odd problem that I haven't found any solutions for. Thoughts?

I assume your printer driver is in charge of conversion. Perhaps it is a file size problem. The driver
may only allow creation of PDF file of less than the maximum file size limit (whatever that is).
Apple has changed the way PDF printing is handled now, the new PDF workflow takes advantage of
the PDF-based printing architecture already present in 10.6. How this interacts with the way 10.6
works with your particular printer, I don't know, but, you may want to contact the printer
manufacturer to see if it a printer limitation (such as available memory) that is causing this to happen.

The Same Album is Split Into Two On My iPod

Okay this may be hard to explain but here it goes...
I bought a CD, and imported it onto my iTunes library. No big deal. It imported fine. Then I tried importing it onto my 4th Generation iPod Touch (32GB). The album has 10 tracks, and it was split into two on my iPod. One album has all tracks 1-10, while the other has tracks 2-10. But when I search up the song on my iPod (on the songs list), it only comes up as one. I tried deleted the album that has tracks 2-10, but when I do, the tracks 2-10 on the other album get deleted, so I'm only left with Track 1.
This is starting to get really confusing for me and I don't know what to do. In my iTunes library it comes up as one album, on iTunes when I look at my songs list it comes up as one album, and even on my actual iPod on the songs list, there's only 1 version of each song, but on the albums list, there's 2 versions of the same album.
Please help! Thanks so much !!

In iTunes on your computer right click on the songs and select Get Info and look at the sorting. From iTunes Help
Tips for using song and CD info to organize your music
You can edit information in the Info window to make it easier to find and sort items in your library. For example, you can:
Group individual movements on a classical CD into one work by indicating the name of the work (for example, “Piano concerto in A Minor, Op. 54”) in the Grouping field.
Group songs that are part of a compilation together in your library by clicking Details and selecting the checkbox next to “Album is a compilation of songs by various artists”.
Identify the individual artists on a tribute album in the Artist field, and type “various” in the Album Artist field.
Create your own genre category by clicking Details and typing the category in the Genre field.
Change the order in which tracks on a CD play by changing the numbers in the Track fields.
Create a Smart Playlist that includes only songs that are just the right speed for your workout by typing the number of beats per minute in the BPM field. For instructions, see Create a Smart Playlist.
Identify a movie as a music video (click the Options button, and choose Music Video from the Media Kind pop-up menu).
Identify an item that you imported from a CD as an audiobook, so it appears under Audiobooks instead of Music (click the Options button and choose Audiobook from the Media Kind pop-up menu). If you do this, iTunes also remembers your place in the audiobook.
Enter custom sorting criteria for an item. Select the item, choose File > Get Info, click Sorting, and enter the custom text.

After Effects CS5.5 crashes when selecting "Edit in Audition" (0::42)

I was surfing around Adobe TV and watching a few tutorials when I decided to try out the edit in audition feature, except when I pulled up my project and selected "edit in audition" I got this error message:
     After Effects error: crash in progress. Last logged message was: <8136>
     <Dynamiclink> <5> 0000000019A79460
     After Effects can't continue: sorry, After Effects has crashed. For After Effects
     help and support, go to http://www.adobe.com/support/aftereffects. If you still
     can't resolve the issue, please contact Adobe technical support (2).
     (0::42)
What I'm trying to import into Audition is really heavily edited and saved as an .aep, but when I do the same with an untouched .mov file it works fine. So maybe it's a limitation of Audition/After Effects? I don't know.
Also, a couple of things have been installed since I started the project, and I read in a thread that might be the problem. But before I go deleting anything I want to make sure the same thing is happening to me.
Aside from this, After Effects works just fine, and so far this is the only error I've gotten.
My setup is
Acer Aspire
Windows 7 64-bit
4GB RAM
Intel i5 processor
Adobe Production Premium

You're probably simply running out of memory to run both programs at the same time and otehr things like compressed audio/ video in the project may complicate matetrs further with hardware acceleration stuff. Not much you can do, most likely beyond the usual advice of making sure all your drivers are up to date...
Mylenium

How to apply same editing to further audio tracks...

Hello all,
i've just made a very complicated sync between a video and audio track within an FCS project.
The video was untouched and i edited the stereo audio track.
Now i would like to apply the same editing to the .ac3 version of the just edited stereo version.
There is a way to do that without remake manually the full work on the ac3 version?
Many many Big Thanks in advance

You might (and I emphasize might) be able to do this by making a duplicate of your sequence, selecting the audio clips in the timeline and making them independent and the reconnecting them to your new audio clips. Probably need to duplicate the audio tracks for each new audio element of the 5:1. Things could get screwed up, so make sure you have your project backed up. Might be simplest just to match your edits.

Editing and Exporting Audio Track Only

Is it possible to just edit and export the audio track from a project that contains video and audio? I turned off the video track, and was able to make edits on the audio track but when I export the edited audio track entire unedited audio track is exported.

That did it. I didn't have the audio timeline material selected as the active window.
Many thanks.

1 album split into two

Hi
I have an album in iTunes 10.5.1 which is split into two, there does not appear to be an discernable diferences in the Get Info of the various tracks, so why does iTunes insist on splitting the album?
Is there any way to tell iTunes that all the tracks are from the same album?
Cheers.

Thanks again for the reply,
I've selected all the tracks then copied and pasted the name of the Artist in the Get Info- Sorting- Sort Artist, this seems to have done the trick. If this fails I'll play around with this option, but this is something that I would rather not do in the future so I appreciate your tip.
Cheers.

Connect_by Parent split into two- causing issues

I am creating a hierarchy solution, same old stuff parent having child and levels. I find the leaf and traverse all the way upto the top, assign it a group and sequence. Group id's are incrment of 1 starting with 1.
I have a sitution where parent splits into two, when it split into two then one of the child should have the same group as parent but the other child should not be part of that group.
I have two cursors first feeds second.
CURSOR firstCursor
IS
SELECT AA
FROM ER
WHERE fk =100
AND (AA NOT IN
(SELECT BB
FROM ER
WHERE BB IS NOT NULL
AND fk =100
OR AA = BB);
CURSOR secondCursor
IS
SELECT P.AA,
P.BB,
P.ER_id,
CONNECT_BY_ISCYCLE ,
LEVEL
FROM ER P
START WITH AA = v_column_name --(FEED FROM CURSOR FIRST GOES HERE)
CONNECT BY NOCYCLE Prior P.BB= P.AA
AND LEVEL <= 80 ;
What I get is follows:
AA (LEAF)          BB(PARENT)           CC_ID (group)
U286                               100
U287                U286               100
U291                U287               100
U292               U291               100
U293           U292               100
AA (LEAF)          BB(PARENT)           CC_ID (group)
U286                               101
U287                U286               101
U290                U287               101
What I want is :
AA (LEAF)          BB(PARENT)           CC_ID (group)
U286                               100
U287                U286               100
U291                U287               100
U292               U291               100
U293           U292               100
AA (LEAF)          BB(PARENT)           CC_ID (group)
U290                U287               101
Edited by: Dinesh.Sharma on Mar 6, 2010 6:59 AM
Edited by: Dinesh.Sharma on Mar 6, 2010 7:52 AM

OK, I resorted to ORDER SIBLINGS BY this time ( gotta love 'trial and error' ;) )
This will change the ordered output of your resultset a bit, but that way splitting uo the hierarchies correctly as desired seems like the simplest way.(I'm assuming a way to split up the hierarchies is of more importance here than the actual values for FK.)
Using this data ( perhaps you made a typo for records 14/15?):
SQL> select * from er;
ER_ID AA    BB     FK
    1 U286          1
    2 U287 U286    1
    3 U291 U287    1
    4 U290 U287    1
    5 U292 U291    1
    6 U293 U292    1
    7 U295 U290    1
    8 U296          1
    9 U297 U297    1
   10 U298 U290    1
   11 U400          1
   12 U401 U400    1
   13 U402 U400    1
   14 U403 401     1
   15 U404 U403    1
   16 U405 U402    1
   17 U417 U405    1
17 rows selected.You get:
SQL> select /* 4. finally add rownumbers over new FK value */
2         er_id
3 ,      aa
4 ,      bb
5 ,      new_fk
6 ,      row_number() over (partition by new_fk order by rn) new_rn
7 from ( select /* 3. sum splits to get FK values*/
8                er_id
9         ,      aa
10         ,      bb
11         ,      rn
12         ,      sum(split_here) over (order by rn) new_fk
13         from ( select /* 2. try to identify when to split using CASE and LAG */
14                       er_id
15                ,      aa
16                ,      bb
17                ,      lvl
18                ,      lf
19                ,      rownum rn
20                ,      case
21                         when split_here = 1 then 1
22                         when lag(lvl) over (order by rownum) >= lvl and lf = 0 then 1
23                         when lag(lvl) over (order by rownum) = lvl
24                          and lag(lf) over (order by rownum) = lf then 1
25                       end split_here
26                from ( /* 1. get an ordered resultset we can split on first */
27                       select er_id
28                       ,      aa
29                       ,      bb
30                       ,      level lvl
31                       ,      connect_by_isleaf lf
32                       ,      case
33                                when
34                                  level = 1
35                                then 1
36                              end split_here
37                       from   er
38                       start with (bb is null or bb=aa)
39                       connect by nocycle prior aa = bb
40                       order siblings by er_id
41                     )
42              )
43       );
ER_ID AA    BB        NEW_FK     NEW_RN
    9 U297 U297           1          1
    1 U286                 2          1
    2 U287 U286           2          2
    3 U291 U287           2          3
    5 U292 U291           2          4
    6 U293 U292           2          5
    4 U290 U287           3          1
    7 U295 U290           3          2
   10 U298 U290           4          1
    8 U296                 5          1
   11 U400                 6          1
   12 U401 U400           6          2
   13 U402 U400           7          1
   16 U405 U402           7          2
   17 U417 U405           7          3
15 rows selected.

Httpwebrequest POST with data splits into two frames

Hi,
I'm working with a code that should send (xml) data to a web site using post method to login.
I have a web page that does exactly that with ajax, and I'm been comparing the post from my code with the post of the webpage with wireshark.
When the post is made from the web page, everything works OK (the login in successfull) and Whireshark shows one line with the full POST and the answer of the site.
When I execute my code, the whireshark shows one line masrked as "PDU reassembly", and then the POST, as if was splitted in two with the connection and cookie information first and the data later.
The problem is that the web site, receives the first frame and as it's not complete, it rejects the login. Then recieves just the data and then discards it.
I've tried different things that I've found in forums, but I can't make it work in one frame. As soon as I add the data part of the post, it is sent splitted.
I attach the code below and a snapshot of the two wireshark captures.
Imports System.Net
Imports System.Text
Imports System.IO
Module Module1
Sub Main()
Dim logincookie As System.Net.Cookie
logincookie = New System.Net.Cookie("RMASESSID", "1234")
logincookie.Domain = "192.168.0.88"
logincookie.Path = "/"
logincookie.HttpOnly = True
Dim postData As String
postData = "<login><usuario>web</usuario><clave>web</clave></login>"
Dim CookiesContainer As System.Net.CookieContainer
CookiesContainer = New System.Net.CookieContainer()
'CookiesContainer.Add(logincookie)
Dim encoding As System.Text.UTF8Encoding
encoding = New System.Text.UTF8Encoding
Dim byteData As System.Byte()
byteData = encoding.GetBytes(postData)
Dim postReq As System.Net.HttpWebRequest
Dim postreqstream As System.IO.Stream
'postReq.CookieContainer = New System.Net.CookieContainer();
Dim DomUri As System.Uri
DomUri = New System.Uri("http://192.168.0.78")
' Genero el POST
postReq = System.Net.WebRequest.Create("http://192.168.0.78:8888/login0001.html")
postReq.CookieContainer = CookiesContainer
postReq.CookieContainer.SetCookies(DomUri, "RMASESSID")
postReq.Method = "POST"
postReq.KeepAlive = True
postReq.ContentType = "application/x-www-form-urlencoded"
postReq.UserAgent = "Mozilla/5.0 (Windows; U; Windows NT 6.1; ru; rv:1.9.2.3) Gecko/20100401 Firefox/4.0 (.NET CLR 3.5.30729)"
postReq.ContentLength = byteData.Length
' Envío el pedido del POST
postReq.SendChunked = False
postreqstream = postReq.GetRequestStream()
postreqstream.Write(byteData, 0, byteData.Length)
postreqstream.Close()
Dim postresponse As System.Net.HttpWebResponse
postresponse = postReq.GetResponse()
CookiesContainer.Add(postresponse.Cookies)
' logincookie = tempCookies;
Dim postreqreader As System.IO.StreamReader
postreqreader = New System.IO.StreamReader(postresponse.GetResponseStream())
Dim thepage As String
thepage = postreqreader.ReadToEnd()
End Sub
End Module
I couldn't attach the images from wireshark, I will send when the account is verified.
Thanks.
Diego

That's a tough one... I can only guess that maybe it has something to do with the configuration of the request... maybe a property value that needs to be changed or header that needs to be added?
I wonder though, if you are hosting this website, can you edit it? Would it be possible to add a proper web service of some sort to the website so that your Windows Forms application had a proper web reference to consume?
Reed Kimble - "When you do things right, people won't be sure you've done anything at all"

RMAN splite in two files

HI,
I am having one 9i database on windows.up to last week it was well functioning but suddenly the rman backup file shown to be got splits in two files.innitially my file size is around 3GB but now it shows spliting in two, one of 2GB and another 1GB.I'm not getting why this happnig.pls help me ..thanking in advance.
Edited by: Nareshs on Mar 17, 2009 10:17 PM

Hi,
Pls find the output...
RMAN>
Starting backup at 24-MAR-09
using target database controlfile instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=11 devtype=DISK
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00002 name=D:\ORACLE\ORADATA\TRAINING\UNDOTBS01.DBF
all files...................
channel ORA_DISK_1: starting piece 1 at 24-MAR-09
channel ORA_DISK_1: finished piece 1 at 24-MAR-09
piece handle=E:\DATABASE_BACKUP\DAILY_BKP\TRAINING\HOT_OPEN\KSKAO0RM_1_1 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:09:06
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00015 name=D:\ORACLE\ORADATA\TRAINING\DEVLOPERS.DBF
all files...................
channel ORA_DISK_1: starting piece 1 at 24-MAR-09
channel ORA_DISK_1: finished piece 1 at 24-MAR-09
piece handle=E:\DATABASE_BACKUP\DAILY_BKP\TRAINING\HOT_OPEN\KTKAO1CP_1_1 comment=NONE
channel ORA_DISK_1: backup set complete, elapsed time: 00:05:38
Finished backup at 24-MAR-09
Starting Control File Autobackup at 24-MAR-09
piece handle=D:\ORACLE\DATABASE\C-4019243942-20090324-00 comment=NONE
Finished Control File Autobackup at 24-MAR-09
RMAN>

In the itunes library, a single album appears to be split into two separate parts, how do i combine them?

my itunes library has several albums that are split into two parts. one contains half of the album's songs and the other the other half. how do i combine these so the album only appears once in it's entirety?

Generally setting a common Album Artist will fix things.
For deeper problems see Grouping tracks into albums.
tt2

Alv output splitting into two rows when converting into excel sheet.

Hi frends,
I have alv report with 60 fields . The report output is coming currently . But when i am exporting into excel sheet from the option local file--> speadsheet each row is splitting into two rows including header in excel sheet.
Please provide your valuable suggestions to avoid this.
Regards,
Ramu .
Edited by: Ramu.K on Sep 8, 2009 5:59 PM

Hi,
Please use the grid option and with the Spreadsheet button (CntrShiftF7). Do "Save as" and save it as excel. It should work.
Regards,
Pradyumna

ORDERS Idoc splitting into two

Hi,
   I have requiremnt where i need to Split Orders idoc into messages.
   1. Orders XML file 2.XML file only with control record fields.
i have seen all the discssion on this and deceiced to implement the scenario as per
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible   blog. But the problem is need to use two message types on the target side.. for splitting the message..
ORDERS and Contrlo record Fields message type... i can't change the standard idoc..
Can i add the Control record fields to Standard IDOC in any way....   like exporting file...if so..
tell me whether the Idoc will split into two messaged or not....
Regards,
Deep

My doubt is in the mentioned blog target msg type was created one.. here i need to take with ORDERS idoc(ED in our case). I need to split the IDOC everytime when it triggers based on RCVPRN field value.. this value is always so there should be 2 values everytime.
you will need to duplicate the IDOC at the target side to achieve this...if you are successful in doing the 0...unbounded thing for your IDOC....
1) Duplicating:
Duplicating is not Multimapping.....Multimapping is what you saw in the blog and duplicating is right-clicking on the node and choosing Duplicate Subtree....no two messages will be created in this process (duplicating).....
2) Multimapping:
it is used to create two (or more) different messages at the target end...
Does it split into two message ( ORDERS XML and Control Record XML)
No it wont split the IDOC into two messages.....
So if your requirement is to have only one target message with seperate IDOC nodes..having ORDERS and Control data individually...then go for duplication method...apply the condition for RCVPRN to generate the nodes...
If your req is to have two different messages at the target then use multimapping apply the condition for RCVPRN to generate the two different messages.....
Hope it helps...
Regards,
Abhishek.

Selected "Edit in Audition," audio track was split into two files. Preference change?[image included]

Similar Messages

Maybe you are looking for